2009-06-07 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/40008
* libgfortran.h: Define IOPARM_OPEN_HAS_NEWUNIT.
* io/open.c (st_open): Don't error on negative unit number if NEWUNIT
was specified. If NEWUNIT is specified, call new function to get the
unique unit number and assign it.
* io/io.h (st_parameter_open): Add pointer to newunit. Add prototype for
next_available_newunit. Add prototype for new function,
get_unique_unit_number.
* io/unit.c: Declare next_available_newunit. Define the first newunit
number. (init_units): Initialize next_available_unit.
(get_unique_unit_number): New function. Fix whitespace and comments.
* io/transfer.c (data_transfer_init): Update error message to not be
specific to OPEN statements.
From-SVN: r148253
2009-04-05 Daniel Kraft <d@domob.eu>
PR fortran/38654
* io/read.c (read_f): Reworked to speed up floating point parsing.
(convert_real): Use pointer-casting instead of memcpy and temporaries.
2009-04-05 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/37754
* io/io.h (format_hash_entry): New structure for hash table.
(format_hash_table): The hash table itself.
(free_format_data): Revise function prototype.
(free_format_hash_table, init_format_hash,
free_format_hash): New function prototypes.
* io/unit.c (close_unit_1): Use free_format_hash_table.
* io/transfer.c (st_read_done, st_write_done): Free format data if
internal unit.
* io/format.c (free_format_hash_table): New function that frees any
memory allocated previously for cached format data.
(reset_node): New static helper function to reset the format counters
for a format node.
(reset_fnode_counters): New static function recursively calls reset_node
to traverse the fnode tree.
(format_hash): New simple hash function based on XOR, probabalistic,
tosses collisions.
(save_parsed_format): New static function to save the parsed format
data to use again.
(find_parsed_format): New static function searches the hash table
looking for a match.
(free_format_data): Revised to accept pointer to format data rather than
the dtp pointer so that the function can be used in more places.
(format_lex): Editorial.
(parse_format_list): Set flag used to determine of format data hashing
is to be used. Internal units are not persistent enough for this.
(revert): Move to ne location in file.
(parse_format): Use new functions to look for previously parsed
format strings and use them rather than re-parse. If not found, saves
the parsed format data for later use.
2009-04-05 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/37754
* io/transfer.c (formatted_transfer_scalar): Remove this function by
factoring it into two new functions, one for read and one for write,
eliminating all the conditionals for read or write mode.
(formatted transfer_scalar_read): New function.
(formatted transfer_scalar_write): New function.
(formatted_transfer): Use new functions.
2009-04-05 Janne Blomqvist <jb@gcc.gnu.org>
PR libfortran/25561 libfortran/37754
* io/io.h (struct stream): Define new stream interface function
pointers, and inline functions for accessing it.
(struct fbuf): Use int instead of size_t, remove flushed element.
(mem_alloc_w): New prototype.
(mem_alloc_r): New prototype.
(stream_at_bof): Remove prototype.
(stream_at_eof): Remove prototype.
(file_position): Remove prototype.
(flush): Remove prototype.
(stream_offset): Remove prototype.
(unit_truncate): New prototype.
(read_block_form): Change to return pointer, int* argument.
(hit_eof): New prototype.
(fbuf_init): Change prototype.
(fbuf_reset): Change prototype.
(fbuf_alloc): Change prototype.
(fbuf_flush): Change prototype.
(fbuf_seek): Change prototype.
(fbuf_read): New prototype.
(fbuf_getc_refill): New prototype.
(fbuf_getc): New inline function.
* io/fbuf.c (fbuf_init): Use int, get rid of flushed.
(fbuf_debug): New function.
(fbuf_reset): Flush, and return position offset.
(fbuf_alloc): Simplify, don't flush, just realloc.
(fbuf_flush): Make usable for read mode, salvage remaining bytes.
(fbuf_seek): New whence argument.
(fbuf_read): New function.
(fbuf_getc_refill): New function.
* io/file_pos.c (formatted_backspace): Use new stream interface.
(unformatted_backspace): Likewise.
(st_backspace): Make sure format buffer is reset, use new stream
interface, use unit_truncate.
(st_endfile): Likewise.
(st_rewind): Likewise.
* io/intrinsics.c: Use new stream interface.
* io/list_read.c (push_char): Don't use u.p.scratch, use realloc
to resize.
(free_saved): Don't check u.p.scratch.
(next_char): Use new stream interface, use fbuf_getc() for external files.
(finish_list_read): flush format buffer.
(nml_query): Update to use modified interface:s
* io/open.c (test_endfile): Use new stream interface.
(edit_modes): Likewise.
(new_unit): Likewise, set bytes_left to 1 for stream files.
* io/read.c (read_l): Use new read_block_form interface.
(read_utf8): Likewise.
(read_utf8_char1): Likewise.
(read_default_char1): Likewise.
(read_utf8_char4): Likewise.
(read_default_char4): Likewise.
(read_a): Likewise.
(read_a_char4): Likewise.
(read_decimal): Likewise.
(read_radix): Likewise.
(read_f): Likewise.
* io/transfer.c (read_sf): Use fbuf_read and mem_alloc_r, remove
usage of u.p.line_buffer.
(read_block_form): Update interface to return pointer, use
fbuf_read for direct access.
(read_block_direct): Update to new stream interface.
(write_block): Use mem_alloc_w for internal I/O.
(write_buf): Update to new stream interface.
(formatted_transfer_scalar): Don't use u.p.line_buffer, use
fbuf_seek for external files.
(us_read): Update to new stream interface.
(us_write): Likewise.
(data_transfer_init): Always check if we switch modes and flush.
(skip_record): Use new stream interface, fix comparison.
(next_record_r): Check for and reset u.p.at_eof, use new stream
interface, use fbuf_getc for spacing.
(write_us_marker): Update to new stream interface, don't inline.
(next_record_w_unf): Likewise.
(sset): New function.
(next_record_w): Use new stream interface, use fbuf for printing
newline.
(next_record): Use new stream interface.
(finalize_transfer): Remove sfree call, use new stream interface.
(st_iolength_done): Don't use u.p.scratch.
(st_read): Don't check for end of file.
(st_read_done): Don't use u.p.scratch, use unit_truncate.
(hit_eof): New function.
* io/unit.c (init_units): Always init fbuf for formatted units.
(update_position): Use new stream interface.
(unit_truncate): New function.
(finish_last_advance_record): Use fbuf to print newline.
* io/unix.c: Remove unused SSIZE_MAX macro.
(BUFFER_SIZE): Make static const variable rather than macro.
(struct unix_stream): Remove dirty_offset, len, method,
small_buffer. Order elements by decreasing size.
(struct int_stream): Remove.
(move_pos_offset): Remove usage of dirty_offset.
(reset_stream): Remove.
(do_read): Rename to raw_read, update to match new stream
interface.
(do_write): Rename to raw_write, update to new stream interface.
(raw_seek): New function.
(raw_tell): New function.
(raw_truncate): New function.
(raw_close): New function.
(raw_flush): New function.
(raw_init): New function.
(fd_alloc): Remove.
(fd_alloc_r_at): Remove.
(fd_alloc_w_at): Remove.
(fd_sfree): Remove.
(fd_seek): Remove.
(fd_truncate): Remove.
(fd_sset): Remove.
(fd_read): Remove.
(fd_write): Remove.
(fd_close): Remove.
(fd_open): Remove.
(fd_flush): Rename to buf_flush, update to new stream interface
and unix_stream.
(buf_read): New function.
(buf_write): New function.
(buf_seek): New function.
(buf_tell): New function.
(buf_truncate): New function.
(buf_close): New function.
(buf_init): New function.
(mem_alloc_r_at): Rename to mem_alloc_r, change prototype.
(mem_alloc_w_at): Rename to mem_alloc_w, change prototype.
(mem_read): Change to match new stream interface.
(mem_write): Likewise.
(mem_seek): Likewise.
(mem_tell): Likewise.
(mem_truncate): Likewise.
(mem_close): Likewise.
(mem_flush): New function.
(mem_sfree): Remove.
(empty_internal_buffer): Cast to correct type.
(open_internal): Use correct type, init function pointers.
(fd_to_stream): Test whether to open file as buffered or raw.
(output_stream): Remove mode set.
(error_stream): Likewise.
(flush_all_units_1): Use new stream interface.
(flush_all_units): Likewise.
(stream_at_bof): Remove.
(stream_at_eof): Remove.
(file_position): Remove.
(file_length): Update logic to use stream interface.
(flush): Remove.
(stream_offset): Remove.
* io/write.c (write_utf8_char4): Use int instead of size_t.
(write_x): Extra safety check.
(namelist_write_newline): Use new stream interface.
From-SVN: r145571
2009-03-22 Janne Blomqvist <jb@gcc.gnu.org>
PR libfortran/25561 libfortran/37754
* io/io.h (struct stream): Define new stream interface function
pointers, and inline functions for accessing it.
(struct fbuf): Use int instead of size_t, remove flushed element.
(mem_alloc_w): New prototype.
(mem_alloc_r): New prototype.
(stream_at_bof): Remove prototype.
(stream_at_eof): Remove prototype.
(file_position): Remove prototype.
(flush): Remove prototype.
(stream_offset): Remove prototype.
(unit_truncate): New prototype.
(read_block_form): Change to return pointer, int* argument.
(hit_eof): New prototype.
(fbuf_init): Change prototype.
(fbuf_reset): Change prototype.
(fbuf_alloc): Change prototype.
(fbuf_flush): Change prototype.
(fbuf_seek): Change prototype.
(fbuf_read): New prototype.
(fbuf_getc_refill): New prototype.
(fbuf_getc): New inline function.
* io/fbuf.c (fbuf_init): Use int, get rid of flushed.
(fbuf_debug): New function.
(fbuf_reset): Flush, and return position offset.
(fbuf_alloc): Simplify, don't flush, just realloc.
(fbuf_flush): Make usable for read mode, salvage remaining bytes.
(fbuf_seek): New whence argument.
(fbuf_read): New function.
(fbuf_getc_refill): New function.
* io/file_pos.c (formatted_backspace): Use new stream interface.
(unformatted_backspace): Likewise.
(st_backspace): Make sure format buffer is reset, use new stream
interface, use unit_truncate.
(st_endfile): Likewise.
(st_rewind): Likewise.
* io/intrinsics.c: Use new stream interface.
* io/list_read.c (push_char): Don't use u.p.scratch, use realloc
to resize.
(free_saved): Don't check u.p.scratch.
(next_char): Use new stream interface, use fbuf_getc() for external files.
(finish_list_read): flush format buffer.
(nml_query): Update to use modified interface:s
* io/open.c (test_endfile): Use new stream interface.
(edit_modes): Likewise.
(new_unit): Likewise, set bytes_left to 1 for stream files.
* io/read.c (read_l): Use new read_block_form interface.
(read_utf8): Likewise.
(read_utf8_char1): Likewise.
(read_default_char1): Likewise.
(read_utf8_char4): Likewise.
(read_default_char4): Likewise.
(read_a): Likewise.
(read_a_char4): Likewise.
(read_decimal): Likewise.
(read_radix): Likewise.
(read_f): Likewise.
* io/transfer.c (read_sf): Use fbuf_read and mem_alloc_r, remove
usage of u.p.line_buffer.
(read_block_form): Update interface to return pointer, use
fbuf_read for direct access.
(read_block_direct): Update to new stream interface.
(write_block): Use mem_alloc_w for internal I/O.
(write_buf): Update to new stream interface.
(formatted_transfer_scalar): Don't use u.p.line_buffer, use
fbuf_seek for external files.
(us_read): Update to new stream interface.
(us_write): Likewise.
(data_transfer_init): Always check if we switch modes and flush.
(skip_record): Use new stream interface, fix comparison.
(next_record_r): Check for and reset u.p.at_eof, use new stream
interface, use fbuf_getc for spacing.
(write_us_marker): Update to new stream interface, don't inline.
(next_record_w_unf): Likewise.
(sset): New function.
(next_record_w): Use new stream interface, use fbuf for printing
newline.
(next_record): Use new stream interface.
(finalize_transfer): Remove sfree call, use new stream interface.
(st_iolength_done): Don't use u.p.scratch.
(st_read): Don't check for end of file.
(st_read_done): Don't use u.p.scratch, use unit_truncate.
(hit_eof): New function.
* io/unit.c (init_units): Always init fbuf for formatted units.
(update_position): Use new stream interface.
(unit_truncate): New function.
(finish_last_advance_record): Use fbuf to print newline.
* io/unix.c: Remove unused SSIZE_MAX macro.
(BUFFER_SIZE): Make static const variable rather than macro.
(struct unix_stream): Remove dirty_offset, len, method,
small_buffer. Order elements by decreasing size.
(struct int_stream): Remove.
(move_pos_offset): Remove usage of dirty_offset.
(reset_stream): Remove.
(do_read): Rename to raw_read, update to match new stream
interface.
(do_write): Rename to raw_write, update to new stream interface.
(raw_seek): New function.
(raw_tell): New function.
(raw_truncate): New function.
(raw_close): New function.
(raw_flush): New function.
(raw_init): New function.
(fd_alloc): Remove.
(fd_alloc_r_at): Remove.
(fd_alloc_w_at): Remove.
(fd_sfree): Remove.
(fd_seek): Remove.
(fd_truncate): Remove.
(fd_sset): Remove.
(fd_read): Remove.
(fd_write): Remove.
(fd_close): Remove.
(fd_open): Remove.
(fd_flush): Rename to buf_flush, update to new stream interface
and unix_stream.
(buf_read): New function.
(buf_write): New function.
(buf_seek): New function.
(buf_tell): New function.
(buf_truncate): New function.
(buf_close): New function.
(buf_init): New function.
(mem_alloc_r_at): Rename to mem_alloc_r, change prototype.
(mem_alloc_w_at): Rename to mem_alloc_w, change prototype.
(mem_read): Change to match new stream interface.
(mem_write): Likewise.
(mem_seek): Likewise.
(mem_tell): Likewise.
(mem_truncate): Likewise.
(mem_close): Likewise.
(mem_flush): New function.
(mem_sfree): Remove.
(empty_internal_buffer): Cast to correct type.
(open_internal): Use correct type, init function pointers.
(fd_to_stream): Test whether to open file as buffered or raw.
(output_stream): Remove mode set.
(error_stream): Likewise.
(flush_all_units_1): Use new stream interface.
(flush_all_units): Likewise.
(stream_at_bof): Remove.
(stream_at_eof): Remove.
(file_position): Remove.
(file_length): Update logic to use stream interface.
(flush): Remove.
(stream_offset): Remove.
* io/write.c (write_utf8_char4): Use int instead of size_t.
(write_x): Extra safety check.
(namelist_write_newline): Use new stream interface.
[[Split portion of a mixed commit.]]
From-SVN: r144993.2
2008-12-21 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/38398
* io/io.h (st_parameter_dt): Add new bit to keep track of when to
suppress blanks for g0 formatting.
* io/transfer.c (formatted_transfer_scalar): Always call write_real_g0
for g0 formatting.
* io.c (write.c): Do not use ES formatting and use new bit to suppress
blanks.
* io/write_float.def (output_float): Adjust the location of setting the
width so that it can be adjusted when suppressing blanks. Set number of
blanks to zero when dtp->u.p.g0_no_blanks is set. Do some minor code
clean-up and add some white space for readability.
From-SVN: r142871
2008-12-08 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/38430
* io/transfer.c (data_transfer_init): Move constraint check for REC=
and STREAM access into condition for other REC= constraints to simplify.
Comment out this constraint to avoid breaking compatibility with 4.3
until later. Added a TODO for above comment and this one.
Fix test for max pos.
From-SVN: r142575
2008-12-05 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR fortran/38291
* io.c (match_dt_element): Use dt->pos in matcher.
(gfc_free_dt): Free dt->pos after use.
(gfc_resolve_dt): Use dt->pos in resolution of stream position tag.
2008-12-05 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/38291
* io/transfer.c (data_transfer_init): Add checks for POS= valid range.
Add check for unit opened with ACCESS="stream". Flush and seek if
current stream position does not match. Check ENDFILE on read.
From-SVN: r142515
PR libfortran/37839
* trans-io.c (gfc_build_io_library_fndecls): Decrease pad size back
to 16 pointers plus 32 integers. Don't use max integer kind
alignment, only gfc_intio_kind's alignment.
(gfc_trans_inquire): Only set flags2 if mask2 is non-zero.
* ioparm.def: Fix order, bitmasks and types of inquire round, sign
and pending fields. Move u in dt before id.
* io.c (gfc_free_inquire): Free decimal and size exprs.
(match_inquire_element): Match size instead of matching blank twice.
(gfc_resolve_inquire): Resolve size.
* gfortran.dg/f2003_inquire_1.f03: New test.
* gfortran.dg/f2003_io_1.f03: Remove xfail.
* gfortran.dg/f2003_io_4.f03: Likewise.
* gfortran.dg/f2003_io_5.f03: Likewise.
* gfortran.dg/f2003_io_6.f03: Likewise.
* gfortran.dg/f2003_io_7.f03: Likewise.
* io/io.h (IOPARM_INQUIRE_HAS_ROUND, IOPARM_INQUIRE_HAS_SIGN,
IOPARM_INQUIRE_HAS_PENDING): Adjust values.
(st_parameter_inquire): Reorder and fix types of round, sign and
pending fields.
(st_parameter_43, st_parameter_44): Removed.
(st_parameter_dt): Put back struct definition directly to u.p
declaration. Change type of u.p.size_used from gfc_offset to
GFC_IO_INT. Decrease back size of u.pad to 16 pointers and
32 ints. Put id, pos, asynchronous, blank, decimal, delim,
pad, round and sign fields after the union.
* io/inquire.c (inquire_via_unit, inquire_via_filename): Only read
flags2 if it is defined.
* io/transfer.c (read_sf, read_block_form, write_block): Cast
additions to size_used to GFC_IO_INT instead of gfc_offset.
(data_transfer_init): Clear whole u.p struct. Adjust
for moving id, pos, asynchronous, blank, decimal, delim, pad,
round and sign fields from u.p directly into st_parameter_dt.
(finalize_transfer): Don't cast size_used to GFC_IO_INT.
* io/file_pos.c (st_endfile): Clear whole u.p struct.
From-SVN: r142111
2008-10-16 Thomas Koenig <tkoenig@gcc.gnu.org>
* io/file_pos.c (unformatted_backspace): Normal case is
GFC_CONVERT_NATIVE.
* io/transfer.c (read_sf): Mark paths leading to generate_error()
as unlikely.
(readl_block_form): Likewise.
(read_block_direct): Likewise.
(write_block): Likewise.
(write_buf): Likewise.
(us_read): Likewise. Normal case is GFC_CONVERT_NATIVE.
(next_record_w_unf): Mark paths leading to generate_error()
as unlikely.
From-SVN: r141179
2008-10-09 Thomas Koenig <tkoenig@gcc.gnu.org>
PR libfortran/37753
* io/transfer.c (unformatted_read): CONVERT_NATIVE
is the usual case. Check for kind==1 for non-byte-reversing
operation.
(unformatted_write): Likewise.
2008-10-09 Thomas Koenig <tkoenig@gcc.gnu.org>
PR libfortran/37753
* gfortran.dg/convert_2.f90: New test case.
From-SVN: r141008
2008-09-22 Jerry DeLisle <jvdelisle@gcc.gnu.org
PR fortran/37498
* trans-io.c (gfc_build_io_library_fndecls): Bump pad size.
(build_dt): Set mask bit for IOPARM_dt_f2003.
* ioparm.def: Add IOPARM_dt_f2003.
2008-09-22 Jerry DeLisle <jvdelisle@gcc.gnu.org
PR libfortran/37498
* file_pos (st_endfile): Clear memory only for libfortran 4.3 private
area.
* list_read.c (eat_separator): Only access F2003 I/O parameters if
IOPARM_DT_HAS_F2003 bit is set. (parse_real): Ditto.
(read_real): Ditto.
* read.c (read_a): Likewise. (read_a_char4): Likewise though not
strictly necessary. (read_f): Likewise.
* io.h (unit_sign_s): New enumerator to allow duplication of
st_parameter structures. (IOPARM_DT_HAS_F2003): New mask bit.
(st_parameter_43): New structure copied from 4.3 version of
st_paramater_dt private section. (st_parameter_44): New structure with
F2003 items added. (st_parameter_dt): Modified to create union of new
and old structures to allow correct memory setting for 4.3 ABI
compatibility. Bumped the pad size.
* transfer.c (read_sf): Do not use F2003 I/O memory areas unless
IOPARM_DT_HAS_F2003 bit has been set. (read_block_form): Ditto.
(formatted_transfer_scalar): Ditto. (data_transfer_init): Ditto and
add comment, fix formatting.
* write.c (write_default_char4): Likewise though not strictly necessary.
(write_utf8_char4): Ditto. (write_character): Ditto.
(write_real_g0): Ditto. (list_formatted_write_scalar): Ditto.
(nml_write_obj): Ditto. (namelist_write): Ditto.
* write_float.def (calculate_sign): Eliminate warning by including all
cases in switch. (output_float): Output only decimal point of F2003 flag
is not set.
From-SVN: r140576
2008-09-01 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR fortran/37228
* io.c (check_format): Allow specifying precision with g0 format.
2008-09-01 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/37301
PR libfortran/37228
* io/io.h (write_real_g0): Declare new function to handle g0.d format.
* io/transfer.c (formatted_transfer_scalar): Use new function.
* io/format.c (parse_format_list): Enable g0.d.
* io/write.c (write_a_char4): Delete unused var.
(set_fnode_default): New function to set the default fnode w, d, and e
factored from write_real. (write_real): Use new factored function.
(write_real_g0): New function that sets d to that passed by g0.d format
specifier and set format to ES. Default values for w and e are used
from the new function, set_fnode_default.
2008-09-01 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR fortran/37228
* gfortran.dg/fmt_g0_4.f08: Revised test.
From-SVN: r139886
2008-06-13 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR fortran/35863
* libgfortran.h: Change l8_to_l4_offset to big_endian and add endian_off.
* runtime/main.c: Fix error in comment. Change l8_to_l4_offset to
big_endian. (determine_endianness): Add endian_off and set its value
according to big_endian.
* gfortran.map: Add symbol for new _gfortran_transfer_character_wide.
* io/io.h: Add prototype declarations for new functions.
* io/list_read.c (list_formatted_read_scalar): Modify to handle kind=4.
(list_formatted_read): Calculate stride based on kind for character type
and use it when calling list_formatted_read_scalar.
* io/inquire.c (inquire_via_unit): Change l8_to_l4_offset to big_endian.
* io/open.c (st_open): Change l8_to_l4_offset to big_endian.
* io/read.c (read_a_char4): New function to handle formatted read.
* io/write.c: Define GFC_CHAR4(x) to improve readability of code.
(write_a_char4): New function to handle formatted write.
(write_character): Modify to accept the kind parameter and adjust for
endianess of the machine. (list_formatted_write): Calculate the stride
resulting from the kind and adjust the list_formatted_write_scalar call
accordingly. (nml_write_obj): Adjust calls to write_character.
(namelist_write): Likewise.
* io/transfer.c (formatted_transfer_scaler): Rename 'len' argument to
'kind' argument to better describe what it is. Add calls to new
functions for kind == 4. (formatted_transfer): Modify to handle the case
of type character and kind equals 4 to pass in the kind to the transfer
routines. (transfer_character_wide): Add this new function.
(transfer_array): Don't set kind to the character string length. Adjust
strides bases on character kind.
(unformatted_read): Adjust size based on kind for character types.
(unformatted_write): Likewise. (data_transfer_init): Change
l8_to_l4_offset to big_endian.
From-SVN: r136763
2008-06-07 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/36420
PR libfortran/36421
PR libfortran/36422
* io/io.h: Add prototype for write_real.
* io/transfer.c (formatted_transfer_scalar): For FMT_G and width zero,
use write_real.
* io/format.c: Add zero width error message. (parse_format_list): Use
error message for FMT_A if followed by FMT_ZERO. Use zero width error
message for FMT_G if mode is READ or if -std=f95 or f2003. (fmormat0):
Fix typo in comment.
* io/write.c (write_a): Set wlen to len if FMT_G and length is zero.
(write_l): Add wlen variable and use it if FMT_G and width is zero.
(write_decimal): If FMT_G, set m to -1 to flag processor dependent
formatting. (write_real): Remove static declaration.
From-SVN: r136545
2008-04-07 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR fortran/25829 28655
* io/open.c (edit_modes): Set flags.async. (new_unit) Set flags.async
and flags.status. (st_open): Initialize flags.async.
* io/list_read.c (read_charactor): Use delim_status instead of
flags.delim.
* io/read.c (read_x): Use pad_status instead of flags.pad.
* io/inquire.c (inquire_via_unit): Add new checks.
(inquire_via_filename): Likewise.
* io/io.h (st_parameter_inquire): Add new flags.
(st_parameter_dt): Likewise.
* io/unit.c (get_internal_unit): Set flags.async. (init_units): Set
flags.async.
* io/transfer.c: Add delim and pad option arrays. (read_sf): Use
pad_status instead of flags.pad. (read_block): Likewise.
(data_transfer_init): Set flags.async and add checks.
* io/write.c (write_character): Use delim_status.
(list_formatted_write_scalar): Likewise. (nml_write_obj): Likewise.
(namelist_write): Likewise.
From-SVN: r133988
2008-04-05 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR fortran/25829 28655
* gfortran.map: Add new symbol, _gfortran_st_wait.
* libgfortran.h (st_paramter_common): Add new I/O parameters.
* open.c (st_option decimal_opt[], st_option encoding_opt[],
st_option round_opt[], st_option sign_opt[], st_option async_opt[]): New
parameter option arrays. (edit_modes): Add checks for new parameters.
(new_unit): Likewise. (st_open): Likewise.
* list_read.c (CASE_SEPERATORS): Add ';' as a valid separator.
(eat_separator): Handle deimal comma. (read_logical): Fix whitespace.
(parse_real): Handle decimal comma. (read_real): Handle decimal comma.
* read.c (read_a): Use decimal status flag to allow comma in place of a
decimal point. (read_f): Allow comma as acceptable character in float.
According to decimal flag, substitute a period for a comma.
(read_x): If decimal status flag is comma, disable the read_comma flag,
not allowing comma as a delimiter, an extension otherwise.
* io.h: (unit_decimal, unit_encoding, unit_round, unit_sign,
unit_async): New enumerators. Add all new I/O parameters.
* unix.c (unix_stream, int_stream): Add io_mode asychronous I/O control.
(move_pos_offset, fd_alloc_w_at): Fix some whitespace.
(fd_sfree): Use new enumerator. (fd_read): Likewise.
(fd_write): Likewise. (fd_close): Fix whitespace.
(fd_open): Use new enumertors. (tempfile, regular_file,
open_external): Fix whitespace. (output_stream, error_stream): Set
method. (stream_offset): Fix whitespace.
* transfer.c: (st_option decimal_opt[], sign_opt[], blank_opt[]): New
option arrays. (formatted_transfer_scalar): Set sf_read_comma flag
based on new decimal_status flag. (data_transfer_init): Initialize new
parameters. Add checks for decimal, sign, and blank. (st_wait): New stub.
* format.c: (format_lex): Add format specifiers DP, DC, and D.
(parse_format_list): Parse the new specifiers.
* write.c (write_decimal): Use new sign enumerators to set the sign.
(write_complex): Handle decimal comma and semi-colon separator.
(nml_write_obj): Likewise.
* write_float.def: Revise sign enumerators. (calculate_sign): Use new
sign enumerators. (output_float): Likewise. Use new decimal_status flag
to set the decimal character to a point or a comma.
From-SVN: r133943
2008-03-28 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/35699
* io/transfer.c (write_buf): Don't pad the record, just return if the
data is NULL. (next_record_w): If there are bytes left in the record
for unformatted direct I/O, pad out the record with zero bytes.
From-SVN: r133699
2008-03-22 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/35632
* io/transfer.c (data_transfer_init): Fix whitespace.
(next_record_w): Truncate the file only if the stream
position is short of the file end.
From-SVN: r133454
2008-02-20 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/35132
* io/transfer.c (next_record_w): Truncate after the last record for
STREAM I/O.
PR libfortran/34954
* io/transfer.c (data_transfer_init): Initialize dtp->rec if writing.
PR libfortran/34974
* io/transfer.c (formatted_transfer_scalar): Flush the buffer if skips
is less than zero. (next_record_w): Use sseek to position the file to
the max position reached.
From-SVN: r132512
2008-01-26 Thomas Koenig <tkoenig@gcc.gnu.org>
PR libfofortran/34887
* io/transfer.c (next_record_w): Always move to the farthest
position when completing the record (also when we are
processing a slash edit descriptor).
2008-01-26 Thomas Koenig <tkoenig@gcc.gnu.org>
PR libfofortran/34887
* gfortran.dg/x_slash_2.f: New test.
From-SVN: r131864
2008-01-25 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/34876
* io/transfer.c (write_buf): Handle case of zero sized array.
(transfer_array): Set data pointer to NULL and size to zero. Then
make a data transfer and return.
From-SVN: r131848
2008-01-18 Jerry DeLisle <jvdelisle@gcc.gnu.org>
* io/transfer.c (formatted_transfer_scalar): Set max_pos to the greater
of the current max_pos or the newly calculated position.
From-SVN: r131640
2008-01-03 Thomas Koenig <tkoenig@gcc.gnu.org>
PR libfortran/34565
* io/io.h: Adjust protoypes for open_internal(),
next_array_record() and init_loop_spec().
* io/list_read.c (next_char): Use argument "finished"
of next_array_record to check for end on internal file.
* io/unit.c: Calculate the offset for an array
internal file and supply this informatin to open_internal().
* io/unix.c (open_internal): Set the offset for the internal
file on open.
* io/transfer.c (init_loop_spec): Calculate the starting
record in case of negative strides. Return size of 0 for
an empty array.
(next_array_record): Use an extra flag to signal that the
array is finished.
(next_record_r): Use the new flag to next_array_record().
(next_record_w): Likewise.
2008-01-03 Thomas Koenig <tkoenig@gcc.gnu.org>
PR libfortran/34565
* gfortran.dg/internal_readwrite_1.f90: New test.
* gfortran.dg/internal_readwrite_2.f90: New test.
From-SVN: r131305
2007-12-25 Jerry DeLisle <jvdelisle@gcc.gnu.org>
* io/transfer.c (read_sf): Check if readlen was less than the requested
number of bytes to read and if so, generate error.
From-SVN: r131177
2007-12-13 Thomas Koenig <tkoenig@gcc.gnu.org>
PR libfortran/34370
PR libfortran/34323
PR libfortran/34405
* io/io.h: Add previous_nonadvancing_write to gfc_unit.
Add prototype for finish_last_advance_record.
* io/file_pos.c (st_backspace): Generate error if backspace is
attempted for direct access or unformatted stream.
If there are bytes left from a previous ADVANCE="no", write
them out before performing the backspace.
(st_endfile): Generate error if endfile is attempted for
direct access.
If there are bytes left from a previous ADVANCE="no", write
them out before performing the endfile.
(st_rewind): Generate error if rewind is attempted for
direct access.
* unit.c (close_unit_1): Move functionality to write
previously written bytes to...
(finish_last_advance_record): ... here.
* transfer.c (data_transfer_init): If reading, reset
previous_nonadvancing_write.
(finalize_transfer): Set the previous_noadvancing_write
flag if we are writing and ADVANCE="no" was specified.
Only call next_record() if advance="no" wasn't specified.
2007-12-13 Thomas Koenig <tkoenig@gcc.gnu.org>
PR libfortran/34370
PR libfortran/34323
PR libfortran/34405
* gfortran.dg/advance_6.f90: New test case.
* gfortran.dg/direct_io_7.f90: New test case.
* gfortran.dg/streamio_13.f90: New test case.
From-SVN: r130912
2007-12-02 Jerry DeLisle <jvdelisle@gcc.gnu.org>
Thomas Koenig <tkoenig@gcc.gnu.org>
PR libfortran/33985
* io/transfer.c (read_block, read_block_direct, write_block, write_buf):
Don't seek if file position is already there for STREAM I/O.
(finalize_transfer): For STREAM I/O don't flush unless the file position
has moved past the start position before the transfer.
Co-Authored-By: Thomas Koenig <tkoenig@gcc.gnu.org>
From-SVN: r130574
2007-11-03 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/33985
* io/transfer.c (finalize_transfer): Do not flush for
unformatted STREAM I/O.
From-SVN: r129870
2007-07-27 Janne Blomqvist <jb@gcc.gnu.org>
* trans-io.c (gfc_build_io_library_fndecls): Change to use
gfc_array_index_type for array descriptor triplets instead of
gfc_int4_type_node.
libgfortran ChangeLog:
2007-07-27 Janne Blomqvist <jb@gcc.gnu.org>
* io/transfer.c (st_set_nml_var_dim): Use index_type instead of
GFC_INTEGER_4 for array descriptor triplets.
From-SVN: r126992
2007-07-14 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/32752
* io/unix.c (unix_stream): Move buffer pointer adjacent to small_buffer.
* io/transfer.c (formatted_transfer_scalar): If stream I/O, set
bytes_used to zero. Fix off by one error in calculation of pos and
skips. Eliminate duplicate pending_spaces check.
From-SVN: r126652
2007-06-10 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/32235
* io/transfer.c (st_read): Remove test for end of file condition.
(next_record_r): Add test for end of file condition.
From-SVN: r125606
2007-05-27 Janne Blomqvist <jb@gcc.gnu.org>
* runtime/string.c (compare0): Use gfc_charlen_type instead of int.
(fstrlen): Likewise.
(find_option): Likewise.
(fstrcpy): Use gfc_charlen_type instead of int, return length.
(cf_strcpy): Likewise.
* libgfortran.h: Change string prototypes to use gfc_charlen_type.
* io/open.c (new_unit): Use snprintf if available.
* io/list_read.c (nml_touch_nodes): Use memcpy instead of strcpy/strcat.
(nml_read_obj): Likewise.
* io/transfer.c (st_set_nml_var): Likewise.
* io/write.c (output_float): Use snprintf if available.
(nml_write_obj) Use memcpy instead of strcpy/strcat.
From-SVN: r125100
2007-05-25 Jerry DeLisle <jvdelisle@gcc.gnu.org>
* io/transfer.c (unformatted_read): Use size from front end eliminating
use of size_from_real_kind. (unformatted_write): Ditto.
From-SVN: r125064
2007-05-06 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/31201
* runtime/error.c (runtime_error_at): New function.
(generate_error): Export this function.
* gfortran.map: Add _gfortran_generate_error and
_gfortran_runtime_error_at.
* libgfortran.h: Add comment to reference error codes in front end.
(library_start): Locate prototype with library_end macro and add
a new comment. Add prototype for runtime_error_at. Export prototype for
generate_error.
* io/lock.c (library_start): Fix check for error condition.
* io/transfer.c (data_transfer_init): Add library check.
From-SVN: r124479
PR libfortran/31210
* io/transfer.c (transfer_character): Avoid passing a NULL
pointer as source to the transfer routines, if the string length
is zero.
From-SVN: r124428
2007-04-28 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/31501
* io/list_read.c (next_char): Fix whitespace.
* io/io.h: Remove prototypes and define macros for is_array_io,
is_stream_io, and is_internal_unit.
* io/unit.c (is_array_io), (is_internal_unit), (is_stream_io): Delete
these functions.
* io/transfer.c (read_sf): Change handling of internal_unit to make a
single call to salloc_r and use memcpy to transfer the data.
From-SVN: r124266
2007-04-27 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/31532
* io/file_pos.c (st_backspace): Set flags.position for end of file
condition and use new function update_position.
(st_endfile): Use new function update_position.
* io/io.h: Add prototype for new function.
* io/inquire.c (inquire_via_unit): If not direct access, set NEXTREC
to zero.
* io/unit.c (update_position): New function to update position info
used by inquire.
* io/transfer.c (next_record): Fix typo and use new function.
From-SVN: r124252
2007-04-23 Thomas Koenig <tkoenig@gcc.gnu.org>
PR fortran/31618
* io/transfer.c (read_block_direct): Instead of calling us_read,
set dtp->u.p.current_unit->current_record = 0 so that pre_position
will read the record marker.
(data_transfer_init): For different error conditions, call
generate_error, then return.
2007-04-23 Thomas Koenig <tkoenig@gcc.gnu.org>
PR fortran/31618
* gfortran.dg/backspace_8.f: New test case.
From-SVN: r124079
2007-04-01 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/31052
* io/open.c (test_endfile): Delete this function.
(edit_modes): Delete call to test_endfile.
(new_unit): Likewise.
* io/io.h: Delete prototype for test_endfile.
* io/transfer.c (next_record_r): Remove use of test_endfile.
(st_read): Add test for end file condition and adjust status.
From-SVN: r123403
2007-04-01 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/31366
* io/transfer.c (read_block_direct): Do not generate error when reading
past EOF on a short record that is less than the RECL= specified.
2007-04-01 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/31207
* io/unit.c (close_unit_1): If there are bytes previously written from
ADVANCE="no", move to the end before closing.
From-SVN: r123401
2007-03-27 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/31052
* io/transfer.c (next_record_r): Do not call test_endfile if in namelist
mode.
From-SVN: r123284
2007-03-25 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/31199
*io/io.h: Add saved_pos to gfc_unit structure.
*io/open.c (new_unit): Initialize saved_pos.
*io/transfer.c (data_transfer_init): Set max_pos to value in saved_pos.
(next_record_w): Fix whitespace.
(finalze_transfer): Calculate max_pos for ADVANCE="no" and save it for
later use. If not ADVANCE="no" set saved_pos to zero.
From-SVN: r123205
2007-03-18 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/31052
* io/file_position (st_rewind): Fix comments. Remove use of
test_endfile. Don't seek if already at 0 position. Use new is_special
function to set endfile state.
* io/open.c (test_endfile): Delete this function.
* io/io.h: Delete prototype for test_endfile. Add prototype
for is_special.
* io/unix.c (is_special): New function. Fix whitespace.
* io/transfer.c (next_record_r): Remove use of test_endfile.
From-SVN: r123038
2007-03-14 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/31051
* io/transfer.c (formatted_transfer_scalar): Adjust position for pending
spaces when in writing mode. Clean up some formatting.
From-SVN: r122940
2007-03-09 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/31099
* io/open.c (new_unit): Initialize bytes_left and recl_subrecord.
* io/transfer.c (next_record_w): Set bytes left to record length for
sequential unformatted I/O.
(next_record_r): Ditto.
(read_block_direct): Fix test for exceeding bytes_left.
From-SVN: r122763
2007-02-02 Paul Thomas <pault@gcc.gnu.org>
PR fortran/30284
PR fortran/30626
* trans-expr.c (gfc_conv_aliased_arg): Remove static attribute
from function and make sure that substring lengths are
translated.
(is_aliased_array): Remove static attribute.
* trans.c : Add prototypes for gfc_conv_aliased_arg and
is_aliased_array.
* trans-io.c (set_internal_unit): Add the post block to the
arguments of the function. Use is_aliased_array to check if
temporary is needed; if so call gfc_conv_aliased_arg.
(build_dt): Pass the post block to set_internal_unit and
add to the block after all io activiy is done.
2007-02-02 Paul Thomas <pault@gcc.gnu.org>
PR fortran/30284
PR fortran/30626
* io/transfer.c (init_loop_spec, next_array_record): Change to
lbound rather than unity base.
2007-02-02 Paul Thomas <pault@gcc.gnu.org>
PR fortran/30284
* gfortran.dg/arrayio_11.f90.f90: New test.
PR fortran/30626
* gfortran.dg/arrayio_12.f90.f90: New test.
From-SVN: r121500
2006-12-27 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/30014
*io/io.h (st_parameter_dt): Change *size and *iolength type to
GFC_IO_INT.
*io/transfer.c (finalize_transfer): Cast dtp->u.p.size_used to
GFC_IO_INT. (iolength_transfer): Cast size * nelems to GFC_IO_INT.
From-SVN: r120234
2006-12-06 Thomas Koenig <Thomas.Koenig@online.de>
PR libfortran/30009
PR libfortran/30056
* gfortran.dg/read_eof_4.f90: Add tests.
* gfortran.dg/readwrite_unf_direct_eor_1.f90: New test.
* gfortran.dg/unf_read_corrupted_1.f90: New test.
2006-12-06 Thomas Koenig <Thomas.Koenig@online.de>
PR libfortran/30009
PR libfortran/30056
* libgfortran.h: Add ERROR_CORRUPT_FILE to error_codes.
* runtime/error.c (translate_error): Add handling for
ERROR_CORRUPT_FILE.
* io/transfer.c (read_block_direct): Add comment about
EOR for stream files.
Remove test for no bytes left for direct access files.
Generate an ERROR_SHORT_RECORD if the read was short.
For unformatted sequential files: Check endfile condition.
Remove test for no bytes left. End of file here means
that the file structure has been corrupted. Pre-position
the file for the next record in case of error.
(write_buf): Whitespace fix. Subtract the number of bytes
written from bytes_left.
From-SVN: r119592
2006-12-01 Thomas Koenig <Thomas.Koenig@online.de>
PR libfortran/29568
* gfortran.dg/convert_implied_open.f90: Change to
new default record length.
* gfortran.dg/unf_short_record_1.f90: Adapt to
new error message.
* gfortran.dg/unformatted_subrecords_1.f90: New test.
2006-12-01 Thomas Koenig <Thomas.Koenig@online.de>
PR libfortran/29568
* gfortran.h (gfc_option_t): Add max_subrecord_length.
(top level): Define MAX_SUBRECORD_LENGTH.
* lang.opt: Add option -fmax-subrecord-length=.
* trans-decl.c: Add new function set_max_subrecord_length.
(gfc_generate_function_code): If we are within the main
program and max_subrecord_length has been set, call
set_max_subrecord_length.
* options.c (gfc_init_options): Add defaults for
max_subrecord_lenght, convert and record_marker.
(gfc_handle_option): Add handling for
-fmax_subrecord_length.
* invoke.texi: Document the new default for
-frecord-marker=<n>.
2006-12-01 Thomas Koenig <Thomas.Koenig@online.de>
PR libfortran/29568
* libgfortran/libgfortran.h (compile_options_t): Add
record_marker. (top level): Define GFC_MAX_SUBRECORD_LENGTH.
* runtime/compile_options.c (set_record_marker): Change
default to four-byte record marker.
(set_max_subrecord_length): New function.
* runtime/error.c (translate_error): Change error message
for short record on unformatted read.
* io/io.h (gfc_unit): Add recl_subrecord, bytes_left_subrecord
and continued.
* io/file_pos.c (unformatted_backspace): Change default of record
marker size to four bytes. Loop over subrecords.
* io/open.c: Default recl is max_offset. If
compile_options.max_subrecord_length has been set, set set
u->recl_subrecord to its value, to the maximum value otherwise.
* io/transfer.c (top level): Add prototypes for us_read, us_write,
next_record_r_unf and next_record_w_unf.
(read_block_direct): Separate codepaths for unformatted direct
and unformatted sequential. If a recl has been set by the
user, use the number of bytes left for the record if it is smaller
than the read request. Loop over subrecords. Set an error if the
user has set a recl and the read was short.
(write_buf): Separate codepaths for unformatted direct and
unformatted sequential. If a recl has been set by the
user, use the number of bytes left for the record if it is smaller
than the read request. Loop over subrecords. Set an error if the
user has set a recl and the read was short.
(us_read): Add parameter continued (to indicate that bytes_left
should not be intialized). Change default of record marker size
to four bytes. Use subrecord. If the subrecord length is smaller than
zero, this indicates a continuation.
(us_write): Add parameter continued (to indicate that the continued
flag should be set). Use subrecord.
(pre_position): Use 0 for continued on us_write and us_read calls.
(skip_record): New function.
(next_record_r_unf): New function.
(next_record_r): Use next_record_r_unf.
(write_us_marker): Default size for record markers is four bytes.
(next_record_w_unf): New function.
(next_record_w): Use next_record_w_unf.
From-SVN: r119412
2006-11-22 Jerry DeLisle <jvdelisle@gcc.gnu.org>
* io/io.h (unit_flags): Add new flag has_recl.
* io.open.c (new_unit): Set flag if RECL= was specified.
* io/transfer.c (us_write): If flag set, leave recl as initialized by
new_unit.
From-SVN: r119087
2006-10-31 Thomas Koenig <Thomas.Koenig@online.de>
PR libfortran/29627
* libgfortran.h: Add ERROR_SHORT_RECORD
* runtime/error.c (translate_error): Add case
for ERROR_SHORT_RECORD.
* io/transfer.c (read_block_direct): Separate codepaths
for stream and record unformatted I/O. Remove unneeded
tests for standard input, padding and formatted I/O.
If the record is short, read in as much data as possible,
then raise the error.
2006-10-31 Thomas Koenig <Thomas.Koenig@online.de>
PR libfortran/29627
* gfortran.dg/unf_short_record_1.f90: New test.
From-SVN: r118341
2006-10-28 Tobias Burnus <burnus@net-b.de>
PR fortran/29625
* io/transfer.c (formatted_transfer_scalar): Allow binary edit
descriptors for real variables; give error for BOZ edit
descriptor for non-integers when using -std=f*.
From-SVN: r118111
2006-10-17 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/29277
* io/list_read.c (next_char): Update strm_pos.
(eat_separator): Delete extra call to unget_char.
* io/transfer.c (read_block): Use read_sf for formatted stream I/O.
(next_record_r): Update strm_pos for formatted stream I/O and handle
end-of-record correctly.
(next_record_w): Ditto.
(next_record): Enable next record (r/w) functions and update strm_pos.
(finalize_transfer): Call next_record to finish the record.
From-SVN: r117846
2006-08-15 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/25828
* libgfortran.h: Rename GFC_LARGE_IO_INT to GFC_IO_INT.
* io/file_pos.c (st_backspace): Ignore if access=STREAM.
(st_rewind): Handle case of access=STREAM.
* io/open.c (access_opt): Add STREAM_ACCESS.
(edit_modes): Set current_record to zero only if not STREAM.
(new_unit): Initialize maxrec, recl, and last_record for STREAM.
* io/read.c (read_x): Advance file position for STREAM.
* io/io.h (enum unit_access): Align IOPARM flags with frontend.
Add ACCESS_STREAM. Add prototype for is_stream_io () function.
Use GFC_IO_INT.
* io/inquire.c (inquire_via_unit): Add text for access = "STREAM".
* io/unit.c (is_stream_io): New function to return true if access =
STREAM.
* io/transfer.c (file_mode): Add modes for unformatted stream and
formatted stream. (current_mode): Return appropriate file mode based
on access flags.
(read_block): Handle formatted stream reads.
(read_block_direct): Handle unformatted stream reads.
(write_block): Handle formatted stream writes.
(write_buf): Handle unformatted stream writes.
(unformatted_read): Fix up, use temporary for size.
(pre_position): Position file for STREAM access.
(data_transfer_init): Initialize for stream access, skip irrelevent
error checks.
(next_record_r),(next_record_w), and (next_record): Do nothing for
stream I/O.
(finalize_transfer): Flush when all done if stream I/O.
From-SVN: r116172
2006-07-21 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/28339
* io/transfer.c (next_record_w): Use next_array_record result to set
END_FILE. (write_block): Test for END_FILE before the next write occurs.
* io/unit.c (get_internal_unit): Initialize iunit->endfile for internal
unit.
From-SVN: r115670
2006-07-03 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/27704
* runtime/error.c (notify_std): Pass common flags into function. Use
flags to show locus of error or warning.
* libgfortran.h: Add enum try. Add prototype for notify_std.
* io/open.c (edit_modes): Allow status="old" and add extension to
allow status="scratch"
*io/list_read.c (nml_read_obj): Update call to notify_std.
*io/io.h: Remove enum try and prototype for notify_std.
*io/transfer.c (read_sf): Update call to notify_std.
*io/format.c (parse_format_list): Update call to notify_std.
From-SVN: r115168
2006-05-16 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/27575
* io/transfer.c (read_block): Add check for end file condition.
(read_block_direct): Add check for end file condition.
From-SVN: r113837
2006-04-22 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/20257
* io/io.h: Add prototypes for get_internal_unit and free_internal_unit.
* io/unit.c (get_internal_unit): Initialize unit number, not zero.
(free_internal_unit): New function to consolidate freeing memory.
(get_unit): Initialize internal_unit_desc to NULL when unit is
external.
* io/unix.c (mem_close): Check for not NULL before freeing memory.
* io/transfer.c (read_block): Reset bytes_left and skip error if unit
is preconnected and default record length is reached.
(read_block_direct): Ditto.
(write_block): Ditto.
(write_buf): Ditto.
(data_transfer_init): Only flush if not internal unit.
(finalize_transfer): Ditto and delete code to free memory used by
internal units.
(st_read_done): Use new function - free_internal_unit.
(st_write_done): Use new function - free_internal unit.
From-SVN: r113190
2006-04-12 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/26766
* io/io.h: Add bit to identify associated unit as internal.
* io/unit.c (get_external_unit): Renamed the find_unit_1 function to
reflect the external unit functionality vs internal unit.
(get_internal_unit): New function to allocate and initialize an internal
unit structure.
(get_unit): Use get_internal_unit and get_external_unit.
(is_internal_unit): Revised to use new bit added in io.h.
* io/transfer.c (data_transfer_init): Fix line width.
(st_read_done): Free memory allocated for internal unit.
(st_write_done): Add test to only flush and truncate when not an
internal unit. Free memory allocated for internal unit.
From-SVN: r112914
2006-03-25 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/26661
* io/io.h: Add read_sf so it can be used by read_x.
* io/transfer.c (read_sf): Pass no_error flag to read_sf. Use it to
break out rather than error on EOF or EOR conditions.
(read_block): Update call to read_sf.
(read_block_direct): Ditto.
* io/read.c (read_x): Use the modified read_sf instead of read_block.
From-SVN: r112390
2006-03-25 Thomas Koenig <Thomas.Koenig@online.de>
PR libfortran/26735
* io/transfer.c (data_transfer_init): Set u_flags.convert
on an unopened unit if specified by environment variable
(via get_unformatted_convert) or by compile-time option.
2006-03-25 Thomas Koenig <Thomas.Koenig@online.de>
PR libfortran/26735
* gfortran.dg/convert_implied_open.f90: New test case.
From-SVN: r112382
2006-03-22 Thomas Koenig <Thomas.Koenig@onlien.de>
PR fortran/19303
* gfortran.h (gfc_option_t): Add record_marker.
* lang.opt: Add -frecord-marker=4 and -frecord-marker=8.
* trans-decl.c: Add gfor_fndecl_set_record_marker.
(gfc_build_builtin_function_decls): Set
gfor_fndecl_set_record_marker.
(gfc_generate_function_code): If we are in the main program
and -frecord-marker was provided, call set_record_marker.
* options.c (gfc_handle_option): Add handling for
-frecord-marker=4 and -frecord-marker=8.
* invoke.texi: Document -frecord-marker.
2006-03-22 Thomas Koenig <Thomas.Koenig@onlien.de>
PR fortran/19303
* libgfortran.h (compile_options_t): Add record_marker.
* runtime/compile_options.c (set_record_marker):
New function.
* io/open.c: If we have four-byte record markers, use
GFC_INTEGER_4_HUGE as default record length.
* io/file_pos.c (unformatted_backspace): Handle
different size record markers.
* io/transfer.c (us_read): Likewise.
(us_write): Likewise.
(next_record_r): Likewise.
(write_us_marker): Likewise.
(next_record_w): Likewise.
2006-03-22 Thomas Koenig <Thomas.Koenig@online.de>
PR fortran/19303
* gfortran.dg/record_marker_1.f90: New test case.
* gfortran.dg/record_marker_2.f: New test case.
* gfortran.dg/record_marker_3.f90: New test case.
From-SVN: r112290
2006-03-17 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/26509
* libgfortran.h: Add ERROR_DIRECT_EOR.
* runtime/error.c (translate_error): Add translation for new error.
* io/transfer.c (write_buf): Add check for EOR when mode is
direct access.
From-SVN: r112198
2006-02-12 Janne Blomqvist <jb@gcc.gnu.org>
PR libgfortran/25949
* io/io.h: Add set function pointer to struct stream.
* io/unix.c (fd_seek): Only update offset, don't seek.
(fd_sset): New function.
(fd_read): Call lseek directly if necessary.
(fd_write): Likewise.
(fd_open): Set pointer to fd_sset.
(mem_set): New function.
(open_internal): Set pointer to mem_set.
* io/transfer.c (write_block_direct): Rename to write_buf, add
error return, non-pointer length argument.
(unformatted_write): Update to use write_buf.
(us_write): Simplify by using swrite instead of salloc_w.
(write_us_marker): New function.
(new_record_w): Use sset instead of memset, use write_us_marker,
simplify by using swrite instead of salloc_w.
From-SVN: r110895
2006-01-17 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/25697
* io/transfer.c (us_read): Detect end of file condition from previous
operations and bail out (no need to pre-position).
From-SVN: r109870
2006-01-17 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/25631
* io/transfer.c (formatted_transfer_scalar): Adjust pending_spaces and
skips so that TL works correctly when no bytes_used yet.
From-SVN: r109858
2006-01-05 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/25598
* io/file_pos.c (unformatted_backspace): Assure the new file position
to seek is not less than zero.
(st_backspace): Set unit bytes_left to zero.
* io/transfer.c (next_record_r): Fix line lengths, no functional change.
From-SVN: r109405
2005-12-28 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/25139
* io/unix.c (fd_truncate): Set s->active to zero.
PR libgfortran/25510
* libgfortran.h: Add ERROR_INTERNAL and ERROR_INTERNAL_UNIT.
* runtime/error.c (translate_error): Add messages for new errors.
* io/list_read.c (next_char): Use new errors.
* io/transfer.c (next_record_r) (next_record_w): Use new errors.
From-SVN: r109122
2005-12-18 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/25463
* io/transfer.c (finalize_transfer): Fix execution order so that
next_record is set to zero in all cases.
From-SVN: r108784
2005-12-16 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/25264
PR libgfortran/25349
* io/unit.c (get_unit): Delete code that cleared the string when the
unit was opened, which is too soon.
* io/transfer.c (next_record_w): Pass done flag in. Change logic for
setting max_pos. Add code to position unit and pad record as needed.
From-SVN: r108671
2005-12-10 Thomas Koenig <Thomas.Koenig@online.de>
PR fortran/23815
* io.c (top level): Add convert to io_tag.
(resolve_tag): convert is GFC_STD_GNU.
(match_open_element): Add convert.
(gfc_free_open): Likewise.
(gfc_resolve_open): Likewise.
(gfc_free_inquire): Likewise.
(match_inquire_element): Likewise.
* dump-parse-tree.c (gfc_show_code_node): Add
convet for open and inquire.
gfortran.h: Add convert to gfc_open and gfc_inquire.
* trans-io.c (gfc_trans_open): Add convert.
(gfc_trans_inquire): Likewise.
* ioparm.def: Add convert to open and inquire.
* gfortran.texi: Document CONVERT.
2005-12-10 Thomas Koenig <Thomas.Koenig@online.de>
PR fortran/23815
* io/file_pos.c (unformatted_backspace): If flags.convert
does not equal CONVERT_NATIVE, reverse the record marker.
* io/open.c: Add convert_opt[].
(st_open): If no convert option is given, set CONVERT_NATIVE.
If CONVERT_BIG or CONVERT_LITTLE are given, set flags.convert to
CONVERT_NATIVE or CONVERT_SWAP (depending on wether we have
a big- or little-endian system).
* io/transfer.c (unformatted_read): Remove unused attribute
from arguments.
If we need to reverse
bytes, break up large transfers into a loop. Split complex
numbers into its two parts.
(unformatted_write): Likewise.
(us_read): If flags.convert does not equal CONVERT_NATIVE,
reverse the record marker.
(next_record_w): Likewise.
(reverse_memcpy): New function.
* io/inquire.c (inquire_via_unit): Implement convert.
* io/io.h (top level): Add enum unit_convert.
Add convert to st_parameter_open and st_parameter_inquire.
Define IOPARM_OPEN_HAS_CONVERT and IOPARM_INQUIRE_HAS_CONVERT.
Increase padding for st_parameter_dt.
Declare reverse_memcpy().
2005-12-10 Thomas Koenig <Thomas.Koenig@online.de>
PR fortran/23815
* gfortran.dg/unf_io_convert_1.f90: New test.
* gfortran.dg/unf_io_convert_2.f90: New test.
* gfortran.dg/unf_io_convert_3.f90: New test.
From-SVN: r108358
2005-12-08 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/25039
* io/io.h: Create a new flag sf_read_comma to control comma
separators in numeric reads.
* io/transfer.c (formatted_transfer_scalar): Initialize the flag.
(read_sf): Check for commas coming in and if the flag is set,
shortcut the read.
* io/read.c (read_a) (read_x): Clear the flag for character reads and
reset it after the reads.
From-SVN: r108271
PR libfortran/25116
* io/transfer.c (data_transfer_init): Don't set the default for
namelist I/O on preconnected files to UNFORMATTED.
From-SVN: r107900
PR libfortran/24919
* io/list_read.c (eat_separator, finish_separator,
read_character): Handle CRLF separators correctly during reads.
(nml_query): Use the HAVE_CRLF macro to print adequate newlines.
* io/io.h (st_parameter_dt): Add comment about the possible
values for sf_seen_eor.
* io/unix.c (tempfile, regular_file): HAVE_CRLF doesn't imply
that O_BINARY is defined, so we add that condition.
(stream_at_bof): Fix typo in comment.
* io/transfer.c (read_sf): Handle correctly CRLF, setting
sf_seen_eor value to 2 instead of 1.
(formatted_transfer_scalar): Use the sf_seen_eor value to
handle CRLF the right way.
* io/write.c (nml_write_obj, namelist_write): Use CRLF as newline
when HAVE_CRLF is defined.
* gfortran.dg/ftell_1.f90: Modify testcase so that it doesn't
fail on CRLF platforms.
* gfortran.dg/ftell_2.f90: Likewise.
From-SVN: r107563
gcc/fortran/
PR fortran/14943
PR fortran/21647
* Make-lang.in (fortran/trans-io.o): Depend on fortran/ioparm.def.
* dump-parse-tree.c (gfc_show_code_node): Dump c->block for
EXEC_{READ,WRITE,IOLENGTH} nodes.
* io.c (terminate_io, match_io, gfc_match_inquire): Put data
transfer commands into EXEC_{READ,WRITE,IOLENGTH}'s code->block.
* resolve.c (resolve_blocks): Handle EXEC_{READ,WRITE,IOLENGTH}.
* trans-io.c (ioparm_unit, ioparm_err, ioparm_end, ioparm_eor,
ioparm_list_format, ioparm_library_return, ioparm_iostat,
ioparm_exist, ioparm_opened, ioparm_number, ioparm_named,
ioparm_rec, ioparm_nextrec, ioparm_size, ioparm_recl_in,
ioparm_recl_out, ioparm_iolength, ioparm_file, ioparm_file_len,
ioparm_status, ioparm_status_len, ioparm_access, ioparm_access_len,
ioparm_form, ioparm_form_len, ioparm_blank, ioparm_blank_len,
ioparm_position, ioparm_position_len, ioparm_action,
ioparm_action_len, ioparm_delim, ioparm_delim_len, ioparm_pad,
ioparm_pad_len, ioparm_format, ioparm_format_len, ioparm_advance,
ioparm_advance_len, ioparm_name, ioparm_name_len,
ioparm_internal_unit, ioparm_internal_unit_len,
ioparm_internal_unit_desc, ioparm_sequential, ioparm_sequential_len,
ioparm_direct, ioparm_direct_len, ioparm_formatted,
ioparm_formatted_len, ioparm_unformatted, ioparm_unformatted_len,
ioparm_read, ioparm_read_len, ioparm_write, ioparm_write_len,
ioparm_readwrite, ioparm_readwrite_len, ioparm_namelist_name,
ioparm_namelist_name_len, ioparm_namelist_read_mode, ioparm_iomsg,
ioparm_iomsg_len, ioparm_var): Remove.
(enum ioparam_type, enum iofield_type, enum iofield,
enum iocall): New enums.
(gfc_st_parameter_field, gfc_st_parameter): New typedefs.
(st_parameter, st_parameter_field, iocall): New variables.
(ADD_FIELD, ADD_STRING): Remove.
(dt_parm, dt_post_end_block): New variables.
(gfc_build_st_parameter): New function.
(gfc_build_io_library_fndecls): Use it. Initialize iocall
array rather than ioparm_*, add extra first arguments to
the function types.
(set_parameter_const): New function.
(set_parameter_value): Add type argument, return a bitmask.
Changed to set a field in automatic structure variable rather
than set a field in a global _gfortran_ioparm variable.
(set_parameter_ref): Likewise. If requested var has different
size than what field should point to, call with a temporary and
then copy into the user variable. Add postblock argument.
(set_string): Remove var_len argument, add type argument, return
a bitmask. Changed to set fields in automatic structure variable
rather than set a field in a global _gfortran_ioparm variable.
(set_internal_unit): Remove iunit, iunit_len, iunit_desc arguments,
add var argument. Return a bitmask. Changed to set fields in
automatic structure variable rather than set a field in a global
_gfortran_ioparm variable.
(set_flag): Removed.
(io_result): Add var argument. Changed to read common.flags field
from automatic structure variable and bitwise AND it with 3.
(set_error_locus): Add var argument. Changed to set fields in
automatic structure variable rather than set a field in a global
_gfortran_{filename,line} variables.
(gfc_trans_open): Use gfc_start_block rather than gfc_init_block.
Create a temporary st_parameter_* structure. Adjust callers of
all above mentioned functions. Pass address of the temporary
variable as first argument to the generated function call.
Use iocall array rather than ioparm_* separate variables.
(gfc_trans_close, build_filepos, gfc_trans_inquire): Likewise.
(build_dt): Likewise. Change first argument to tree from tree *.
Don't dereference code->ext.dt if last_dt == INQUIRE. Emit
IOLENGTH argument setup here. Set dt_parm/dt_post_end_block
variables and gfc_trans_code the nested data transfer commands
in code->block.
(gfc_trans_iolength): Just set last_dt and call build_dt immediately.
(transfer_namelist_element): Pass address of dt_parm variable
to generated functions. Use iocall array rather than ioparm_*
separate variables.
(gfc_trans_backspace, gfc_trans_endfile, gfc_trans_rewind,
gfc_trans_flush, gfc_trans_read, gfc_trans_write): Use iocall array
rather than ioparm_* separate variables.
(gfc_trans_dt_end): Likewise. Pass address of dt_parm variable
as first argument to generated function. Adjust io_result caller.
Prepend dt_post_end_block before io_result code.
(transfer_expr): Use iocall array rather than ioparm_* separate
variables. Pass address of dt_parm variables as first argument
to generated functions.
* ioparm.def: New file.
gcc/testsuite/
PR fortran/24774
* gfortran.dg/inquire_9.f90: New test.
PR fortran/21647
* gfortran.fortran-torture/execute/inquire_5.f90: New test.
libgfortran/
PR fortran/24774
PR fortran/14943
PR fortran/21647
* Makefile.am (AM_CPPFLAGS): Add gcc directories as -I paths,
add -D_GNU_SOURCE.
* Makefile.in: Regenerated.
* acinclude.m4 (LIBGFOR_CHECK_SYNC_FETCH_AND_ADD,
LIBGFOR_CHECK_GTHR_DEFAULT, LIBGFOR_CHECK_PRAGMA_WEAK): New macros.
* configure.ac: Add them.
* configure: Rebuilt.
* config.h.in: Rebuilt.
* libtool-version: Bump libgfortran.so SONAME to libgfortran.so.1.
* libgfortran.h (library_start, show_locus, internal_error,
generate_error, find_option): Add st_parameter_common * argument.
(library_end): Change into a dummy macro.
* io/io.h: Include gthr.h.
(SUPPORTS_WEAK): Define if HAVE_PRAGMA_WEAK.
(CHARACTER): Remove define.
(st_parameter, global_t): Remove typedef.
(ioparm, g, ionml, current_unit): Remove variables.
(init_error_stream): Remove prototype.
(CHARACTER1, CHARACTER2): Define.
(st_parameter_common, st_parameter_open, st_parameter_close,
st_parameter_filepos, st_parameter_inquire, st_parameter_dt): New
typedefs.
(IOPARM_LIBRETURN_MASK, IOPARM_LIBRETURN_OK, IOPARM_LIBRETURN_ERROR,
IOPARM_LIBRETURN_END, IOPARM_LIBRETURN_EOR, IOPARM_ERR, IOPARM_END,
IOPARM_EOR, IOPARM_HAS_IOSTAT, IOPARM_HAS_IOMSG, IOPARM_COMMON_MASK,
IOPARM_OPEN_HAS_RECL_IN, IOPARM_OPEN_HAS_FILE, IOPARM_OPEN_HAS_STATUS,
IOPARM_OPEN_HAS_ACCESS, IOPARM_OPEN_HAS_FORM, IOPARM_OPEN_HAS_BLANK,
IOPARM_OPEN_HAS_POSITION, IOPARM_OPEN_HAS_ACTION,
IOPARM_OPEN_HAS_DELIM, IOPARM_OPEN_HAS_PAD, IOPARM_CLOSE_HAS_STATUS,
IOPARM_INQUIRE_HAS_EXIST, IOPARM_INQUIRE_HAS_OPENED,
IOPARM_INQUIRE_HAS_NUMBER, IOPARM_INQUIRE_HAS_NAMED,
IOPARM_INQUIRE_HAS_NEXTREC, IOPARM_INQUIRE_HAS_RECL_OUT,
IOPARM_INQUIRE_HAS_FILE, IOPARM_INQUIRE_HAS_ACCESS,
IOPARM_INQUIRE_HAS_FORM, IOPARM_INQUIRE_HAS_BLANK,
IOPARM_INQUIRE_HAS_POSITION, IOPARM_INQUIRE_HAS_ACTION,
IOPARM_INQUIRE_HAS_DELIM, IOPARM_INQUIRE_HAS_PAD,
IOPARM_INQUIRE_HAS_NAME, IOPARM_INQUIRE_HAS_SEQUENTIAL,
IOPARM_INQUIRE_HAS_DIRECT, IOPARM_INQUIRE_HAS_FORMATTED,
IOPARM_INQUIRE_HAS_UNFORMATTED, IOPARM_INQUIRE_HAS_READ,
IOPARM_INQUIRE_HAS_WRITE, IOPARM_INQUIRE_HAS_READWRITE,
IOPARM_DT_LIST_FORMAT, IOPARM_DT_NAMELIST_READ_MODE,
IOPARM_DT_HAS_REC, IOPARM_DT_HAS_SIZE, IOPARM_DT_HAS_IOLENGTH,
IOPARM_DT_HAS_FORMAT, IOPARM_DT_HAS_ADVANCE,
IOPARM_DT_HAS_INTERNAL_UNIT, IOPARM_DT_HAS_NAMELIST_NAME,
IOPARM_DT_IONML_SET): Define.
(gfc_unit): Add lock, waiting and close fields. Change file
from flexible array member into pointer to char.
(open_external): Add st_parameter_open * argument.
(find_file, file_exists): Add file and file_len arguments.
(flush_all_units): New prototype.
(max_offset, unit_root, unit_lock): New variable.
(is_internal_unit, is_array_io, next_array_record,
parse_format, next_format, unget_format, format_error,
read_block, write_block, next_record, convert_real,
read_a, read_f, read_l, read_x, read_radix, read_decimal,
list_formatted_read, finish_list_read, namelist_read,
namelist_write, write_a, write_b, write_d, write_e, write_en,
write_es, write_f, write_i, write_l, write_o, write_x, write_z,
list_formatted_write, get_unit): Add st_parameter_dt * argument.
(insert_unit): Remove prototype.
(find_or_create_unit, unlock_unit): New prototype.
(new_unit): Return gfc_unit *. Add st_parameter_open *
and gfc_unit * arguments.
(free_fnodes): Remove prototype.
(free_format_data): New prototype.
(scratch): Remove.
(init_at_eol): Remove prototype.
(free_ionml): New prototype.
(inc_waiting_locked, predec_waiting_locked, dec_waiting_unlocked):
New inline functions.
* io/unit.c (max_offset, unit_root, unit_lock): New variables.
(insert): Adjust os_error caller.
(insert_unit): Made static. Allocate memory here, initialize
lock and after inserting it return it, locked.
(delete_unit): Adjust for deletion of g.
(find_unit_1): New function.
(find_unit): Use it.
(find_or_create_unit): New function.
(get_unit): Add dtp argument, change meaning of the int argument
as creation request flag. Adjust for different st_* calling
conventions, lock internal unit's lock before returning it
and removal of g. Call find_unit_1 instead of find_unit.
(is_internal_unit, is_array_io): Add dtp argument, adjust for
removal of most of global variables.
(init_units): Initialize unit_lock. Adjust insert_unit callers
and adjust for g removal.
(close_unit_1): New function.
(close_unit): Use it.
(unlock_unit): New function.
(close_units): Lock unit_lock, use close_unit_1 rather than
close_unit.
* io/close.c (st_close): Add clp argument. Adjust for new
st_* calling conventions and internal function API changes.
* io/file_pos.c (st_backspace, st_endfile, st_rewind, st_flush):
Add fpp argument. Adjust for new st_* calling conventions and
internal function API changes.
(formatted_backspace, unformatted_backspace): Likewise. Add
u argument.
* io/open.c (edit_modes, st_open): Add opp argument. Adjust for
new st_* calling conventions and internal function API changes.
(already_open): Likewise. If not HAVE_UNLINK_OPEN_FILE, unlink
scratch file. Instead of calling close_unit just call sclose,
free u->file if any and clear a few u fields before calling
new_unit.
(new_unit): Return gfc_unit *. Add opp and u arguments.
Adjust for new st_* calling conventions and internal function
API changes. Don't allocate unit here, rather than work with
already created unit u already locked on entry. In case
of failure, close_unit it.
* io/unix.c: Include unix.h.
(BUFFER_SIZE, unix_stream): Moved to unix.h.
(unit_to_fd): Add unlock_unit call.
(tempfile): Add opp argument, use its fields rather than ioparm.
(regular_file): Likewise.
(open_external): Likewise. Only unlink file if fd >= 0.
(init_error_stream): Add error argument, set structure it points
to rather than filling static variable and returning its address.
(FIND_FILE0_DECL, FIND_FILE0_ARGS): Define.
(find_file0): Use them. Don't crash if u->s == NULL.
(find_file): Add file and file_len arguments, use them instead
of ioparm. Add locking. Pass either an array of 2 struct stat
or file and file_len pair to find_file0.
(flush_all_units_1, flush_all_units): New functions.
(file_exists): Add file and file_len arguments, use them instead
of ioparm.
* io/unix.h: New file.
* io/lock.c (ioparm, g, ionml): Remove variables.
(library_start): Add cmp argument, adjust for new st_* calling
conventions.
(library_end): Remove.
(free_ionml): New function.
* io/inquire.c (inquire_via_unit, inquire_via_filename,
st_inquire): Add iqp argument, adjust for new st_* calling
conventions and internal function API changes.
* io/format.c (FARRAY_SIZE): Decrease to 64.
(fnode_array, format_data): New typedefs.
(avail, array, format_string, string, error, saved_token, value,
format_string_len, reversion_ok, saved_format): Remove variables.
(colon_node): Add const.
(free_fnode, free_fnodes): Remove.
(free_format_data): New function.
(next_char, unget_char, get_fnode, format_lex, parse_format_list,
format_error, parse_format, revert, unget_format, next_test): Add
fmt or dtp arguments, pass it all around, adjust for internal
function API changes and adjust for removal of global variables.
(next_format): Likewise. Constify return type.
(next_format0): Constify return type.
* io/transfer.c (current_unit, sf_seen_eor, eor_condition, max_pos,
skips, pending_spaces, scratch, line_buffer, advance_status,
transfer): Remove variables.
(transfer_integer, transfer_real, transfer_logical,
transfer_character, transfer_complex, transfer_array, current_mode,
read_sf, read_block, read_block_direct, write_block,
write_block_direct, unformatted_read, unformatted_write,
type_name, write_constant_string, require_type,
formatted_transfer_scalar, us_read, us_write, pre_position,
data_transfer_init, next_record_r, next_record_w, next_record,
finalize_transfer, iolength_transfer, iolength_transfer_init,
st_iolength, st_iolength_done, st_read, st_read_done, st_write,
st_write_done, st_set_nml_var, st_set_nml_var_dim,
next_array_record): Add dtp argument, pass it all around, adjust for
internal function API changes and removal of global variables.
* io/list_read.c (repeat_count, saved_length, saved_used,
input_complete, at_eol, comma_flag, last_char, saved_string,
saved_type, namelist_mode, nml_read_error, value, parse_err_msg,
nml_err_msg, prev_nl): Remove variables.
(push_char, free_saved, next_char, unget_char, eat_spaces,
eat_separator, finish_separator, nml_bad_return, convert_integer,
parse_repeat, read_logical, read_integer, read_character,
parse_real, read_complex, read_real, check_type,
list_formatted_read_scalar, list_formatted_read, finish_list_read,
find_nml_node, nml_untouch_nodes, nml_match_name, nml_query,
namelist_read): Add dtp argument, pass it all around, adjust for
internal function API changes and removal of global variables.
(nml_parse_qualifier): Likewise. Add parse_err_msg argument.
(nml_read_obj): Likewise. Add pprev_nl, nml_err_msg, clow and
chigh arguments.
(nml_get_obj_data): Likewise. Add pprev_nl and nml_err_msg
arguments.
(init_at_eol): Removed.
* io/read.c (convert_real, read_l, read_a, next_char, read_decimal,
read_radix, read_f, read_x): Add dtp argument, pass it all around,
adjust for internal function API changes and removal of global
variables.
(set_integer): Adjust internal_error caller.
* io/write.c (no_leading_blank, nml_delim): Remove variables.
(write_a, calculate_sign, calculate_G_format, output_float,
write_l, write_float, write_int, write_decimal, write_i, write_b,
write_o, write_z, write_d, write_e, write_f, write_en, write_es,
write_x, write_char, write_logical, write_integer, write_character,
write_real, write_complex, write_separator,
list_formatted_write_scalar, list_formatted_write, nml_write_obj,
namelist_write): Add dtp argument, pass it all around, adjust for
internal function API changes and removal of global variables.
(extract_int, extract_uint, extract_real): Adjust internal_error
callers.
* runtime/fpu.c (_GNU_SOURCE): Don't define here.
* runtime/error.c: Include ../io/unix.h.
(filename, line): Remove variables.
(st_printf): Pass address of a local variable to init_error_stream.
(show_locus): Add cmp argument. Use fields it points to rather than
filename and line variables.
(os_error, runtime_error): Remove show_locus calls.
(internal_error): Add cmp argument. Pass it down to show_locus.
(generate_error): Likewise. Use flags bitmask instead of non-NULL
check for iostat and iomsg parameter presence, adjust for st_*
calling convention changes.
* runtime/stop.c (stop_numeric, stop_string): Remove show_locus
calls.
* runtime/pause.c (pause_numeric, pause_string): Likewise.
* runtime/string.c: Include ../io/io.h.
(find_option): Add cmp argument. Pass it down to generate_error.
* intrinsics/flush.c (recursive_flush): Remove.
(flush_i4, flush_i8): Use flush_all_units. Add unlock_unit
call.
* intrinsics/rand.c: Include ../io/io.h.
(rand_seed_lock): New variable.
(srand, irand): Add locking.
(init): New constructor function.
* intrinsics/random.c: Include ../io/io.h.
(random_lock): New variable.
(random_r4, random_r8, arandom_r4, arandom_r8): Add locking.
(random_seed): Likewise. open failed if fd < 0. Set i correctly.
(init): New constructor function.
* intrinsics/system_clock.c (tp0, t0): Remove.
(system_clock_4, system_clock_8): Don't subtract tp0/t0 from current
time, use just integer arithmetics.
* intrinsics/tty.c (isatty_l4, isatty_l8, ttynam_sub): Add
unlock_unit calls.
From-SVN: r107328
2005-10-24 Jerry DeLisle <jvdelisle@verizon.net>
PR libgfortran/24224
* libgfortran.h: Remove array stride error code.
* runtime/error.c: Remove array stride error.
* io/io.h: Change name of 'nml_loop_spec' to 'array_loop_spec' to be
generic. Add pointer to array_loop_spec and rank to gfc_unit
structure.
* io/list_read.c: Revise nml_loop_spec references to array_loop_spec.
* io/transfer.c (init_loop_spec): New function to initialize
an array_loop_spec.
(next_array_record): New function to return the index to the next array
record by incrementing through the array_loop_spec.
(next_record_r): Use new function.
(next_record_w): Use new function.
(finalize_transfer): Free memory allocated for array_loop_spec.
* io/unit.c (get_array_unit_len): Delete this function. Use new
function init_loop_spec to initialize the array_loop_spec.
From-SVN: r105878
2005-10-23 Jerry DeLisle <jvdelisle@verizon.net>
PR libgfortran/24489
* io/transfer.c (read_block): Change the order of execution to not read
past end-of-record.
(read_block_direct): Same change.
From-SVN: r105840
2005-10-07 Janne Blomqvist <jblomqvi@cc.hut.fi>
PR fortran/16339
PR fortran/23363
* io/io.h: Add read and write members to stream, define access
macros.
* io/transfer.c (read_block_direct): New function.
(write_block_direct): New function.
(unformatted_read): Change to use read_block_direct.
(unformatted_write): Change to use write_block_direct.
* io/unix.c: Remove mmap includes and defines.
(writen): Remove.
(readn): Remove.
(reset_stream): New function.
(do_read): New function.
(do_write): New function.
(fd_flush): Change to use do_write() instead of writen().
(fd_alloc_r_at): Change to use do_read().
(fd_seek): Change return type to try, as the prototype. Add check
to avoid syscall overhead if possible.
(fd_read): New function.
(fd_write): New function.
(fd_open): Set pointers for new functions.
(mem_read): New function.
(mem_write): New function.
(open_internal): Set pointers for new functions.
(is_seekable): Clean up comment.
From-SVN: r105101
2005-10-07 Jerry DeLisle <jvdelisle@verizon.net>
* io/transfer.c (write_block): Add test for end-of-file condition,
removed from mem_alloc_w_at. (next_record_w): Clean up checks for
NULL pointer returns from s_alloc_w.
* io/unix.c (mem_alloc_w_at): Remove call to generate_error end-of-file.
* io/write.c (write_float): Add checks for NULL pointer returns from
write_block calls. (write_integer): Same.
From-SVN: r105092
2005-09-24 Janne Blomqvist <jblomqvi@cc.hut.fi>
* trans-io.c (gfc_build_io_library_fndecls): Add entry
iocall_x_array for transfer_array. (transfer_array_desc): New
function. (gfc_trans_transfer): Add code to call
transfer_array_desc.
2005-09-24 Janne Blomqvist <jblomqvi@cc.hut.fi>
* io.h: Changed prototypes of list_formatted_{read|write}.
* list_read.c (list_formatted_read): Renamed to
list_formatted_read_scalar and made static. (list_formatted_read):
New function.
* transfer.c: Prototype for transfer_array. Changed transfer
function pointer. (unformatted_read): Add nelems argument, use
it. (unformatted_write): Likewise. (formatted_transfer): Changed
name to formatted_transfer_scalar. (formatted_transfer): New
function. (transfer_integer): Add nelems argument to transfer
call, move updating item count to transfer
functions. (transfer_real): Likewise. (transfer_logical):
Likewise. (transfer_character): Likewise. (transfer_complex):
Likewise. (transfer_array): New function. (data_transfer_init):
Call formatted_transfer with new argument. (iolength_transfer):
New argument, use it.
* write.c (list_formatted_write): Renamed to
list_formatted_write_scalar, made static. (list_formatted_write):
New function.
From-SVN: r104662
2005-09-14 Jerry DeLisle <jvdelisle@verizon.net
PR fortran/21875 Internal Unit Array I/O, NIST
* libgfortran.h: Add run time error code for array stride.
* runtime/error.c (translate_error): Add error message for
array stride.
* io/io.h: Add array descriptor pointer to IOPARM structure.
Add prtotypes for two new functions.
* io/transfer.c (data_transfer_init): Removed initialization and
moved to unit.c (get_unit)
* io/transfer.c (next_record_r): Include internal unit read
functionality.
* io/transfer.c (next_record_w): Include internal unit write
functionality, including padding of character array records.
* io/unit.c (get_array_unit_len): New function to return the number
of records in the character array 'file' from the array descriptor.
* io/unit.c (get_unit): Gathered initialization code from
init_data_transfer for internal units and added initialization of
character array unit.
* io/unit.c (is_array_io): New function to determine if internal unit
is an array.
* io/unix.c (mem_alloc_w_at): Add error checks for bad record length
and end of file.
From-SVN: r104276
PR libfortran/20179
* io/unix.c (is_preconnected): Add function to test if a stream
corresponds to a preconnected unit.
* io/io.h: Add prototype for is_preconnected.
* io/transfer.c (data_transfer_init): Do not truncate
preconnected units.
From-SVN: r104141
PR libfortran/23262
* acinclude.m4 (LIBGFOR_CHECK_CRLF): New check.
* configure.ac: Use new check.
* configure.in: Regenerate.
* config.h.in: Regenerate.
* configure: Regenerate.
* io/transfer.c (next_record_w): Add case for CRLF as line
terminator.
* io/unix.c (tempfile, regular_file): Open files with
O_BINARY on systems with CRLF.
From-SVN: r104009
2005-09-04 Thomas Koenig <Thomas.Koenig@online.de>
PR libfortran/23321
* io/transfer.c(data_transfer_init): Check for a too-large
record number. Return if sseek failed.
2005-09-04 Thomas Koenig <Thomas.Koenig@online.de>
PR libfortran/23321
* gfortran.dg/direct_io_4.f90: New test case.
From-SVN: r103835
* io/read.c (read_x): Take int argument instead of fnode * and
digging the N from F->u.n.
* io/io.h (read_x): Adjust prototype.
* io/transfer.c (formatted_transfer): Adjust callers. Don't clobber
f->u.n for FMT_T.
* gfortran.dg/fmt_t_1.f90: New test.
From-SVN: r103811
2005-08-16 Thomas Koenig <Thomas.Koenig@online.de>
PR libfortran/23428
* io/transfer.c (iolength_transfer): Remove __attribute__ ((unused))
from type. Return correct length for inquire(iolength=)
for complex variables.
2005-08-16 Thomas Koenig <Thomas.Koenig@online.de>
PR libfortran/23428
* gfortran.dg/inquire-complex.f90: New test case.
From-SVN: r103168
2005-08-04 Paul Thomas <pault@gcc.gnu.org>
* transfer.c (data_transfer_init): Truncate file in
sequential WRITE when last_record == 0, rather than
current_record. Cures problem on RH9.
From-SVN: r102746
2005-07-30 Paul Thomas <pault@gcc.gnu.org>
PR fortran/22570 and related issues.
* transfer.c (formatted_transfer): Make sure that there
really is data present before X- or T- editing. Move all
treatment of tabbing during writes to start of next data
producing format. Suppress incorrect zeroing of bytes_left
in slash formating. Insert int cast for assignment of a
difference of two gfc_offsets.
PR fortran/22570 an related issues.
* gfortran.dg/x_slash_1.f: New test.
From-SVN: r102583
2005-07-22 Jerry DeLisle <jvdelisle@verizon.net>
PR libfortran/21875 (FM111.f)
* io/read.c (next_char): Return a ' ' character when BLANK_ZERO
or BLANK_NULL are active.
(read_decimal): Interpret ' ' character correctly for BZ or BN.
(read_radix): Interpret ' ' character correctly for BZ or BN.
(read_f): Interpret ' ' character correctly for BZ or BN.
2005-07-22 Paul Thomas <pault@gcc.gnu.org>
PR libfortran/22570
* read.c (read_x): Correct the condition for doing the
x-editing during formatted input.
* transfer.c (formatted_transfer): Cast offset difference
as int, clean-up arithmetic with new variable, bytes_used,
zero counters for FMT_SLASH,
(data_transfer_init) Zero X- and T-editing counters
unconditionally.
(next_record_w) Zero X- and T-editing counters.
unconditionally.
From-SVN: r102284
2005-07-12 Paul Thomas <pault@gcc.gnu.org>
PR libfortran/16435
* transfer.c (formatted_transfer): Correct the problems
with X- and T-editting that caused TLs followed by TRs
to overwrite data, which caused NIST FM908.FOR to fail
on many tests.
(data_transfer_init): Zero X- and T-editting counters at
the start of formatted IO.
* write.c (write_x): Write specified number of skips with
specified number of spaces at the end.
2005-07-12 Paul Thomas <pault@gcc.gnu.org>
PR libfortran/16435
* gfortran.dg/tl_editting.f90: New.
* gfortran.dg/g77/f77-edit-x-out.f: Remove XFAIL.
From-SVN: r102008
PR libfortran/22170
* io/transfer.c (formatted_transfer): Do not iterate on the
repeat count of a FMT_SLASH, since this is already done in
next_format().
From-SVN: r101377
PR libfortran/16436
* io/transfer.c (read_sf): Correct updating of bytes_left field.
(formatted_transfer): Correct updating of bytes_left field and
reformatting code (comments and whitespace).
* io/unix.c (move_pos_offset): "active" field should not be
changed here. Whitespace corrections.
* gfortran.dg/g77/f77-edit-t-in.f: Not XFAIL-ed any more.
From-SVN: r101100
PR libfortran/20006
* io.c (format_item_1): Add check and extension warning for
$ edit descriptor.
* io/format.c (parse_format_list): Set repeat count of $ format
node to 1.
* io/transfer.c (read_sf): Add g.seen_dollar to the test
concerning advancing I/O.
(data_transfer_init): Likewise.
(finalize_transfer): Likewise.
From-SVN: r100314
2005-04-10 Thomas Koenig <Thomas.Koenig@online.de>
PR libfortran/17992
PR libfortran/19568
PR libfortran/19595
PR libfortran/20005
PR libfortran/20092
PR libfortran/20131
PR libfortran/20138
PR libfortran/20661
PR libfortran/20744
* io/transfer.c (top level): eor_condition: New static variable.
(read_sf): Remove unnecessary zeroing of buffer (there is enough
information in its length).
Return a string of length 0 (to be padded by caller) if EOR was
seen previously.
Remove erroneous special casing of EOR for standard input.
Set eor_condition for non-advancing I/O if an end of line was
detected.
Increment ioparm.size if necessary.
(formatted_transfer): Skip the function if there is an EOR condition.
(data_transfer_init): Initialize eor_condition to zero (false).
(next_record_r): Clear sf_seen_eor if a \n has been seen already.
(finalize_transfer): If there is an EOR condition, raise the error.
2005-04-10 Thomas Koenig <Thomas.Koenig@online.de>
* eor_handling_1.f90: New test case.
* eor_handling_2.f90: New test case.
* eor_handling_3.f90: New test case.
* eor_handling_4.f90: New test case.
* eor_handling_5.f90: New test case.
* noadv_size.f90: New test case.
* pad_no.f90: New test case.
From-SVN: r97943
PR fortran/19872
* io/transfer.c (data_transfer_init): truncate an existing
file on the first write.
Co-Authored-By: Steven G. Kargl <kargls@comcast.net>
From-SVN: r97937
PR libfortran/20660
* io/inquire.c (inquire_via_unit): Non-opened units should still be
reported by an INQUIRE statement as existing.
* io/transfer.c (data_transfer_init): Never accept negative units.
PR libfortran/20660
* gfortran.dg/negative_unit.f: New test.
From-SVN: r97326
PR libfortran/19678
PR libfortran/19679
* gfortran.dg/dos_eol.f: New test.
PR libfortran/19678
* list_read.c (next_char, eat_separator, finish_separator, read_real)
(namelist_read): Add support for '\r' as well as '\n' as EOL
character.
PR libfortran/19679
* list_read.c (read_sf): Add a '\r' in a test to support DOS
line-endings when line length is exceeded.
From-SVN: r97041
2004-02-21 Bud Davis <bdavis@gfortran.org>
PR fortran/20086
* io/transfer.c (write_constant_string): accept an 'h' as
the start of a hollerith format string.
2005-02-21 Bud Davis <bdavis9659@comcast.net>
PR fortran/20086
* gfortran.dg/pr20086.f90: New test.
From-SVN: r95379
2005-01-22 Thomas Koenig <Thomas.Koenig@online.de>
PR libfortran/19451
* io/transfer.c (finalize_transfer): Don't do anything if
there is an error condition.
* open_readonly_1.f90: New test.
From-SVN: r94101
2004-01-22 Bud Davis <bdavis9659@comcast.net>
PR fortran/19314
* io/inquire.c(inquire_via_unit): implement POSITION=.
* io/transfer.c(next_record): update position for
INQUIRE.
* io/rewind.c(st_rewind): update position for
INQUIRE.
* gfortran.dg/inquire_5.f90: New test.
From-SVN: r94060
2005-01-16 Bud Davis <bdavis9659@comcast.net>
PR fortran/18778
* gfortran.dg/endfile_2.f90: New test.
* io/transfer.c (us_read): no bytes available is not a
runtime error.
From-SVN: r93737
2005-01-15 Bud Davis <bdavis9659@comcast.net>
PR fortran/18983
* io/transfer.c (st_write_done): only truncate when it
is required.
2005-01-15 Bud Davis <bdavis9659@comcast.net>
PR fortran/18983
* gfortran.dg/write_to_null.f90: New test.
From-SVN: r93689
Jerry DeLisle