platform/chrome: cros_ec_lpc: Add support for mec1322 EC

This adds support for the ChromeOS LPC Microchip Embedded Controller
(mec1322) variant.

mec1322 accesses I/O region [800h, 9ffh] through embedded memory
interface (EMI) rather than LPC.

Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Benson Leung <bleung@chromium.org>

drivers/platform/chrome/cros_ec_lpc_mec.c

@@ -0,0 +1,140 @@
+/*
+ * cros_ec_lpc_mec - LPC variant I/O for Microchip EC
+ *
+ * Copyright (C) 2016 Google, Inc
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * This driver uses the Chrome OS EC byte-level message-based protocol for
+ * communicating the keyboard state (which keys are pressed) from a keyboard EC
+ * to the AP over some bus (such as i2c, lpc, spi).  The EC does debouncing,
+ * but everything else (including deghosting) is done here.  The main
+ * motivation for this is to keep the EC firmware as simple as possible, since
+ * it cannot be easily upgraded and EC flash/IRAM space is relatively
+ * expensive.
+ */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/mfd/cros_ec_commands.h>
+#include <linux/mfd/cros_ec_lpc_mec.h>
+#include <linux/mutex.h>
+#include <linux/types.h>
+
+/*
+ * This mutex must be held while accessing the EMI unit. We can't rely on the
+ * EC mutex because memmap data may be accessed without it being held.
+ */
+static struct mutex io_mutex;
+
+/*
+ * cros_ec_lpc_mec_emi_write_address
+ *
+ * Initialize EMI read / write at a given address.
+ *
+ * @addr:        Starting read / write address
+ * @access_type: Type of access, typically 32-bit auto-increment
+ */
+static void cros_ec_lpc_mec_emi_write_address(u16 addr,
+			enum cros_ec_lpc_mec_emi_access_mode access_type)
+{
+	/* Address relative to start of EMI range */
+	addr -= MEC_EMI_RANGE_START;
+	outb((addr & 0xfc) | access_type, MEC_EMI_EC_ADDRESS_B0);
+	outb((addr >> 8) & 0x7f, MEC_EMI_EC_ADDRESS_B1);
+}
+
+/*
+ * cros_ec_lpc_io_bytes_mec - Read / write bytes to MEC EMI port
+ *
+ * @io_type: MEC_IO_READ or MEC_IO_WRITE, depending on request
+ * @offset:  Base read / write address
+ * @length:  Number of bytes to read / write
+ * @buf:     Destination / source buffer
+ *
+ * @return 8-bit checksum of all bytes read / written
+ */
+u8 cros_ec_lpc_io_bytes_mec(enum cros_ec_lpc_mec_io_type io_type,
+			    unsigned int offset, unsigned int length,
+			    u8 *buf)
+{
+	int i = 0;
+	int io_addr;
+	u8 sum = 0;
+	enum cros_ec_lpc_mec_emi_access_mode access, new_access;
+
+	/*
+	 * Long access cannot be used on misaligned data since reading B0 loads
+	 * the data register and writing B3 flushes.
+	 */
+	if (offset & 0x3 || length < 4)
+		access = ACCESS_TYPE_BYTE;
+	else
+		access = ACCESS_TYPE_LONG_AUTO_INCREMENT;
+
+	mutex_lock(&io_mutex);
+
+	/* Initialize I/O at desired address */
+	cros_ec_lpc_mec_emi_write_address(offset, access);
+
+	/* Skip bytes in case of misaligned offset */
+	io_addr = MEC_EMI_EC_DATA_B0 + (offset & 0x3);
+	while (i < length) {
+		while (io_addr <= MEC_EMI_EC_DATA_B3) {
+			if (io_type == MEC_IO_READ)
+				buf[i] = inb(io_addr++);
+			else
+				outb(buf[i], io_addr++);
+
+			sum += buf[i++];
+			offset++;
+
+			/* Extra bounds check in case of misaligned length */
+			if (i == length)
+				goto done;
+		}
+
+		/*
+		 * Use long auto-increment access except for misaligned write,
+		 * since writing B3 triggers the flush.
+		 */
+		if (length - i < 4 && io_type == MEC_IO_WRITE)
+			new_access = ACCESS_TYPE_BYTE;
+		else
+			new_access = ACCESS_TYPE_LONG_AUTO_INCREMENT;
+
+		if (new_access != access ||
+		    access != ACCESS_TYPE_LONG_AUTO_INCREMENT) {
+			access = new_access;
+			cros_ec_lpc_mec_emi_write_address(offset, access);
+		}
+
+		/* Access [B0, B3] on each loop pass */
+		io_addr = MEC_EMI_EC_DATA_B0;
+	}
+
+done:
+	mutex_unlock(&io_mutex);
+
+	return sum;
+}
+EXPORT_SYMBOL(cros_ec_lpc_io_bytes_mec);
+
+void cros_ec_lpc_mec_init(void)
+{
+	mutex_init(&io_mutex);
+}
+EXPORT_SYMBOL(cros_ec_lpc_mec_init);
+
+void cros_ec_lpc_mec_destroy(void)
+{
+	mutex_destroy(&io_mutex);
+}
+EXPORT_SYMBOL(cros_ec_lpc_mec_destroy);