xilinx/ll_temac: Move the Xilinx drivers

Move the Xilinx drivers into drivers/net/ethernet/xilinx/ and
make the necessary Kconfig and Makefile changes.

CC: John Williams <john.williams@petalogix.com>
CC: "David H. Lynch Jr." <dhlii@dlasys.net>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

drivers/net/ethernet/xilinx/ll_temac_mdio.c

@@ -0,0 +1,122 @@
+/*
+ * MDIO bus driver for the Xilinx TEMAC device
+ *
+ * Copyright (c) 2009 Secret Lab Technologies, Ltd.
+ */
+
+#include <linux/io.h>
+#include <linux/netdevice.h>
+#include <linux/mutex.h>
+#include <linux/phy.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_address.h>
+#include <linux/slab.h>
+#include <linux/of_mdio.h>
+
+#include "ll_temac.h"
+
+/* ---------------------------------------------------------------------
+ * MDIO Bus functions
+ */
+static int temac_mdio_read(struct mii_bus *bus, int phy_id, int reg)
+{
+	struct temac_local *lp = bus->priv;
+	u32 rc;
+
+	/* Write the PHY address to the MIIM Access Initiator register.
+	 * When the transfer completes, the PHY register value will appear
+	 * in the LSW0 register */
+	mutex_lock(&lp->indirect_mutex);
+	temac_iow(lp, XTE_LSW0_OFFSET, (phy_id << 5) | reg);
+	rc = temac_indirect_in32(lp, XTE_MIIMAI_OFFSET);
+	mutex_unlock(&lp->indirect_mutex);
+
+	dev_dbg(lp->dev, "temac_mdio_read(phy_id=%i, reg=%x) == %x\n",
+		phy_id, reg, rc);
+
+	return rc;
+}
+
+static int temac_mdio_write(struct mii_bus *bus, int phy_id, int reg, u16 val)
+{
+	struct temac_local *lp = bus->priv;
+
+	dev_dbg(lp->dev, "temac_mdio_write(phy_id=%i, reg=%x, val=%x)\n",
+		phy_id, reg, val);
+
+	/* First write the desired value into the write data register
+	 * and then write the address into the access initiator register
+	 */
+	mutex_lock(&lp->indirect_mutex);
+	temac_indirect_out32(lp, XTE_MGTDR_OFFSET, val);
+	temac_indirect_out32(lp, XTE_MIIMAI_OFFSET, (phy_id << 5) | reg);
+	mutex_unlock(&lp->indirect_mutex);
+
+	return 0;
+}
+
+int temac_mdio_setup(struct temac_local *lp, struct device_node *np)
+{
+	struct mii_bus *bus;
+	const u32 *bus_hz;
+	int clk_div;
+	int rc, size;
+	struct resource res;
+
+	/* Calculate a reasonable divisor for the clock rate */
+	clk_div = 0x3f; /* worst-case default setting */
+	bus_hz = of_get_property(np, "clock-frequency", &size);
+	if (bus_hz && size >= sizeof(*bus_hz)) {
+		clk_div = (*bus_hz) / (2500 * 1000 * 2) - 1;
+		if (clk_div < 1)
+			clk_div = 1;
+		if (clk_div > 0x3f)
+			clk_div = 0x3f;
+	}
+
+	/* Enable the MDIO bus by asserting the enable bit and writing
+	 * in the clock config */
+	mutex_lock(&lp->indirect_mutex);
+	temac_indirect_out32(lp, XTE_MC_OFFSET, 1 << 6 | clk_div);
+	mutex_unlock(&lp->indirect_mutex);
+
+	bus = mdiobus_alloc();
+	if (!bus)
+		return -ENOMEM;
+
+	of_address_to_resource(np, 0, &res);
+	snprintf(bus->id, MII_BUS_ID_SIZE, "%.8llx",
+		 (unsigned long long)res.start);
+	bus->priv = lp;
+	bus->name = "Xilinx TEMAC MDIO";
+	bus->read = temac_mdio_read;
+	bus->write = temac_mdio_write;
+	bus->parent = lp->dev;
+	bus->irq = lp->mdio_irqs; /* preallocated IRQ table */
+
+	lp->mii_bus = bus;
+
+	rc = of_mdiobus_register(bus, np);
+	if (rc)
+		goto err_register;
+
+	mutex_lock(&lp->indirect_mutex);
+	dev_dbg(lp->dev, "MDIO bus registered;  MC:%x\n",
+		temac_indirect_in32(lp, XTE_MC_OFFSET));
+	mutex_unlock(&lp->indirect_mutex);
+	return 0;
+
+ err_register:
+	mdiobus_free(bus);
+	return rc;
+}
+
+void temac_mdio_teardown(struct temac_local *lp)
+{
+	mdiobus_unregister(lp->mii_bus);
+	kfree(lp->mii_bus->irq);
+	mdiobus_free(lp->mii_bus);
+	lp->mii_bus = NULL;
+}
+