Merge branch 'pci/controller/endpoint'

- Change "PCI Endpoint Virtual NTB driver" Kconfig prompt to be different
  from "PCI Endpoint NTB driver" (Shunsuke Mie)

- Automatically create a function specific attributes group for endpoint
  drivers to avoid reference counting issues (Damien Le Moal)

- Move and unexport pci_epf_type_add_cfs() (Damien Le Moal)

- Reinitialize EPF test DMA transfer completion before submitting it to
  avoid losing the completion notification (Damien Le Moal)

- Fix EPF test DMA transfer completion detection (Damien Le Moal)

- Submit EPF test DMA transfers with dmaengine_submit(), not tx_submit()
  (Damien Le Moal)

- Simplify EPF test read/write/copy functions (Damien Le Moal)

- Simplify EPF test "raise IRQ" interface (Damien Le Moal)

- Simplify EPF test IRQ command execution (Damien Le Moal)

- Improve EPF test command/status register handling (Damien Le Moal)

- Free IRQs before removing device (Damien Le Moal)

- Reinitialize IRQ completions for every test (Damien Le Moal)

- Don't write status in IRQ handler to avoid race (Damien Le Moal)

- Fix dma_chan direction in data transfer test (Yoshihiro Shimoda)

- Return pci_epf_type_add_cfs() error if EPF has no driver (Damien Le Moal)

- Add kernel-doc for pci_epc_raise_irq() and pci_epc_map_msi_irq() MSI
  vector parameters (Manivannan Sadhasivam)

- Pass EPF device ID to driver probe functions (Manivannan Sadhasivam)

- Return -EALREADY if EPC has already been started/stopped (Manivannan
  Sadhasivam)

- Add linkdown notifier support and use it in qcom-ep (Manivannan
  Sadhasivam)

- Add Bus Master Enable event support and use it in qcom-ep (Manivannan
  Sadhasivam)

- Add Qualcomm Modem Host Interface (MHI) endpoint driver (Manivannan
  Sadhasivam)

- Add Layerscape PME interrupt handling to manage link-up notification
  (Frank Li)

* pci/controller/endpoint:
  PCI: layerscape: Add the endpoint linkup notifier support
  PCI: endpoint: pci-epf-vntb: Fix typo in comments
  MAINTAINERS: Add PCI MHI endpoint function driver under MHI bus
  PCI: endpoint: Add PCI Endpoint function driver for MHI bus
  PCI: qcom-ep: Add support for BME notification
  PCI: qcom-ep: Add support for Link down notification
  PCI: endpoint: Add BME notifier support
  PCI: endpoint: Add linkdown notifier support
  PCI: endpoint: Return error if EPC is started/stopped multiple times
  PCI: endpoint: Pass EPF device ID to the probe function
  PCI: endpoint: Add missing documentation about the MSI/MSI-X range
  PCI: endpoint: Improve pci_epf_type_add_cfs()
  PCI: endpoint: functions/pci-epf-test: Fix dma_chan direction
  misc: pci_endpoint_test: Simplify pci_endpoint_test_msi_irq()
  misc: pci_endpoint_test: Do not write status in IRQ handler
  misc: pci_endpoint_test: Re-init completion for every test
  misc: pci_endpoint_test: Free IRQs before removing the device
  PCI: epf-test: Simplify transfers result print
  PCI: epf-test: Simplify DMA support checks
  PCI: epf-test: Cleanup request result handling
  PCI: epf-test: Cleanup pci_epf_test_cmd_handler()
  PCI: epf-test: Improve handling of command and status registers
  PCI: epf-test: Simplify IRQ test commands execution
  PCI: epf-test: Simplify pci_epf_test_raise_irq()
  PCI: epf-test: Simplify read/write/copy test functions
  PCI: epf-test: Use dmaengine_submit() to initiate DMA transfer
  PCI: epf-test: Fix DMA transfer completion detection
  PCI: epf-test: Fix DMA transfer completion initialization
  PCI: endpoint: Move pci_epf_type_add_cfs() code
  PCI: endpoint: Automatically create a function specific attributes group
  PCI: endpoint: Fix a Kconfig prompt of vNTB driver

Documentation/PCI/endpoint/pci-ntb-howto.rst

@@ -88,13 +88,10 @@ commands can be used::
 	# echo 0x104c > functions/pci_epf_ntb/func1/vendorid
 	# echo 0xb00d > functions/pci_epf_ntb/func1/deviceid
 
-In order to configure NTB specific attributes, a new sub-directory to func1
-should be created::
-
-	# mkdir functions/pci_epf_ntb/func1/pci_epf_ntb.0/
-
-The NTB function driver will populate this directory with various attributes
-that can be configured by the user::
+The PCI endpoint framework also automatically creates a sub-directory in the
+function attribute directory. This sub-directory has the same name as the name
+of the function device and is populated with the following NTB specific
+attributes that can be configured by the user::
 
 	# ls functions/pci_epf_ntb/func1/pci_epf_ntb.0/
 	db_count    mw1         mw2         mw3         mw4         num_mws

Documentation/PCI/endpoint/pci-vntb-howto.rst

@@ -84,13 +84,10 @@ commands can be used::
 	# echo 0x1957 > functions/pci_epf_vntb/func1/vendorid
 	# echo 0x0809 > functions/pci_epf_vntb/func1/deviceid
 
-In order to configure NTB specific attributes, a new sub-directory to func1
-should be created::
-
-	# mkdir functions/pci_epf_vntb/func1/pci_epf_vntb.0/
-
-The NTB function driver will populate this directory with various attributes
-that can be configured by the user::
+The PCI endpoint framework also automatically creates a sub-directory in the
+function attribute directory. This sub-directory has the same name as the name
+of the function device and is populated with the following NTB specific
+attributes that can be configured by the user::
 
 	# ls functions/pci_epf_vntb/func1/pci_epf_vntb.0/
 	db_count    mw1         mw2         mw3         mw4         num_mws