Jonathan writes:
IIO: 1st set of new device support, features and cleanup for 6.9
IIO Backend support
===================
New approach from Nuno Sa to the problem of reuse of drivers with
IIO devices that are actually the combination of a highspeed chip
and an FPGA core handling the data capture and flows. It will hopefully
also apply to some other split designs. The ad9467 and axi-adi drivers
are converted over to this framework.
New device support
==================
adi,admfm2000
- New driver for this dual microwave down converter.
ams,as73211
- Add support for as7331 UV sensor.
richtek,rtq6056
- Add support for related parts RTQ6053 and RTQ6059
st,lsm6dsx
- Add ASM330LHHXG1 accelerometer and gyro support (mainly IDs)
ti,ads1298
- New driver for this medical ADC.
Features
========
tests
- Unit tests for the gain-time-scale helper library.
bosch,bmi088
- I2C support.
bosh,bmi160
- Add 10EC5280 ACPI ID. Used in a number of devices that won't get fixed.
The ID is actually a PCI ID belonging to realtech. No response was received
to earlier attempts to notify them of this.
The manufacturers of some devices have replied to say they will not fix
this incorrect ID. Add the ID and hope it isn't a problem.
bosch,bmi323
- Add BOSC0200 ACPI ID. Note this is a duplicate of one in the bmc150
driver (it appears these parts share a windows driver).
Both drivers perform an ID check that is safe on the other part before
successfully probing.
hid-sensors-als
- Add color temperature and chromaticity support. Note this is a replacement
for the series reverted in 6.8 that correctly handles all the potential
channel combinations.
honeywell,hsc030pa
- Triggered buffer support (after driver cleanup).
honeywell,mprls00025pa
- Improved error handling.
- New DT binding to allow use of part number triplet as provided in data sheet
to specify equivalent of most of the binding more efficiently.
- SPI support.
memsic,mxc4005
- ACPI ID MDA6655 as seen in the Chuwi Minibook X 2023
ti,hdc3020
- Add threshold event support (after some driver cleanup)
veml,vcnl4000
- Switch to high resolution proximity measurement.
Cleanup
=======
Various minor typo fixes and better use of defines etc.
Treewide
- Stop using ACPI_PTR(). The savings in space are small and not worth
the complexity of __maybe_unused of ifdef guards. To avoid use in
new IIO drivers based on copy and paste, clean it out.
- cleanup.h based handling of iio_device_claim_direct_mode()/
iio_device_release_direct_mode() using scope_cond_guard().
In many drivers this is combined with other automated cleanup
to give maximum simplifications.
An initial set of drivers are converted over to this infrastructure.
Tools
- Use rewinddir() instead of seekdir() to return to start of file.
core
- Make iio_bus_type constant.
adi,ad16475
- Use irq_get_trigger_type() instead of opencoding.
adi,ad16480
- Use irq_get_trigger_type() instead of opencoding.
adi,ad-sigma-delta
- Avoid overwriting IRQ flags if provided by firmware.
ams,as73211
- Use IIO_VAL_FRACTIONAL for scales to simplify the code and potentially
improve accuracy.
gts-library
- Use a div64_u64() instead of a loop to do a division.
honeywell,mprls00025pa
- Clean up dt-binding doc.
- Drop defaults when DT binding not providing values. Very unlikely
these were useful given they were wrong for vast majority of supported
devices.
- Whitespace cleanup
miramems,da280
- Use i2c_get_match_data() to replace hand rolled ACPI matching code.
semtech,sx9324
- Avoid unnecessary copying of property strings.
st,lsm6dsx
- Improve docs, particularly wrt to making addition of new device
support less noisy.
st,lsm9ds0
- Use dev_err_probe() in all probe() error handling.
- Improved header includes.
- Tidy up termination of ID tables.
ti,ads1014
- Correct upper bound on PGA (wrong value had no actual impact)
ti,afe4403/4404
- devm_ useage to simplify error handling in probe() and allow() remove to
be dropped.
voltage-divider
- Add dt-binding for io-channel-cells to allow such a device to be both
an IIO consumer and IIO producer at the same time.
* tag 'iio-for-6.9a' of http://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (106 commits)
iio: imu: bmi323: Add ACPI Match Table
iio: accel: bmc150: Document duplicate ACPI entries with bmi323 driver
iio: adc: ti-ads1298: Add driver
dt-bindings: iio: adc: ti-ads1298: Add bindings
iio: pressure: hsc030pa add triggered buffer
iio: pressure: hsc030pa add mandatory delay
iio: pressure: hsc030pa: update datasheet URLs
iio: pressure: hsc030pa: include cleanup
iio: pressure: hsc030pa: use signed type to hold div_64() result
dt-bindings: iio: pressure: honeywell,hsc030pa.yaml add spi props
iio: st_sensors: lsm9ds0: Use common style for terminator in ID tables
iio: st_sensors: lsm9ds0: Don't use "proxy" headers
iio: st_sensors: lsm9ds0: Use dev_err_probe() everywhere
iio: adc: adi-axi-adc: move to backend framework
iio: adc: ad9467: convert to backend framework
iio: add the IIO backend framework
iio: buffer-dmaengine: export buffer alloc and free functions
of: property: add device link support for io-backends
dt-bindings: adc: axi-adc: update bindings for backend framework
dt-bindings: adc: ad9467: add new io-backend property
...
update the comments and Kconfig file with more descriptive and
accurate information about newly added device: BMI085, BMI090L.
Signed-off-by: Jun Yan <jerrysteve1101@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
KX022A is a 3-axis accelerometer from ROHM/Kionix. The sensor features
include variable ODRs, I2C and SPI control, FIFO/LIFO with watermark IRQ,
tap/motion detection, wake-up & back-to-sleep events, four acceleration
ranges (2, 4, 8 and 16g), and probably some other cool features.
Add support for the basic accelerometer features such as getting the
acceleration data via IIO. (raw reads, triggered buffer [data-ready] or
using the WMI IRQ).
Important things to be added include the double-tap, motion
detection and wake-up as well as the runtime power management.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/758b00d6aea0a6431a5a3a78d557d449c113b21e.1666614295.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
MSA311 is a tri-axial, low-g accelerometer with I2C digital output for
sensitivity consumer applications. It has dynamic user-selectable full
scales range of +-2g/+-4g/+-8g/+-16g and allows acceleration measurements
with output data rates from 1Hz to 1000Hz.
This driver supports following MSA311 features:
- IIO interface
- Different power modes: NORMAL and SUSPEND (using pm_runtime)
- ODR (Output Data Rate) selection
- Scale and samp_freq selection
- IIO triggered buffer, IIO reg access
- NEW_DATA interrupt + trigger
Below features to be done:
- Motion Events: ACTIVE, TAP, ORIENT, FREEFALL
- Low Power mode
Datasheet: https://cdn-shop.adafruit.com/product-files/5309/MSA311-V1.1-ENG.pdf
Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220822175011.2886-4-ddrokosov@sberdevices.ru
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The ADXL367 is an ultralow power, 3-axis MEMS accelerometer.
The ADXL367 does not alias input signals to achieve ultralow power
consumption, it samples the full bandwidth of the sensor at all
data rates. Measurement ranges of +-2g, +-4g, and +-8g are available,
with a resolution of 0.25mg/LSB on the +-2 g range.
In addition to its ultralow power consumption, the ADXL367
has many features to enable true system level power reduction.
It includes a deep multimode output FIFO, a built-in micropower
temperature sensor, and an internal ADC for synchronous conversion
of an additional analog input.
Signed-off-by: Cosmin Tanislav <cosmin.tanislav@analog.com>
Link: https://lore.kernel.org/r/20220214073810.781016-6-cosmin.tanislav@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
BMC156 is another accelerometer that works just fine with the bmc150-accel
driver. It's very similar to BMC150 (also a accelerometer + magnetometer
combo) but with only one accelerometer interrupt pin. It would make sense
if only INT1 was exposed but someone at Bosch decided to only have an
INT2 pin.
Try to deal with this by making use of the INT2 support introduced
in the previous commit and force using INT2 for BMC156. To detect
that we need to bring up a simplified version of the previous type IDs.
Note that unlike the type IDs removed in commit c06a6aba68
("iio: accel: bmc150: Drop misleading/duplicate chip identifiers")
here I only add one for the special case of BMC156. Everything else
still happens by reading the CHIP_ID register since the chip type
information often is not accurate in ACPI tables.
Tested-by: Nikita Travkin <nikita@trvn.ru> # BMC156
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20210802155657.102766-5-stephan@gerhold.net
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
With CONFIG_SPI=y and CONFIG_I2C=m, building fxls8962af into vmlinux
causes a link error against the I2C module:
aarch64-linux-ld: drivers/iio/accel/fxls8962af-core.o: in function `fxls8962af_fifo_flush':
fxls8962af-core.c:(.text+0x3a0): undefined reference to `i2c_verify_client'
Work around it by adding a Kconfig dependency that forces the SPI driver
to be a loadable module whenever I2C is a module.
Fixes: af959b7b96 ("iio: accel: fxls8962af: fix errata bug E3 - I2C burst reads")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210721151330.2176653-1-arnd@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Commit c1d1c4a62d ("iio: accel: bma180: BMA254 support") added
BMA254 support to the bma180 driver and changed some naming to BMA25x
to make it easier to add support for BMA253 and BMA255.
Unfortunately, there is quite some overlap between the bma180 driver
and the bmc150-accel driver. Back when the commit was made, the
bmc150-accel driver actually already had support for BMA255, and
adding support for BMA254 would have been as simple as adding a new
compatible to bmc150-accel.
The bmc150-accel driver is a bit better for BMA254 since it also
supports the motion trigger/interrupt functionality. Fortunately,
moving BMA254 support over to bmc150-accel is fairly simple because
the drivers have compatible device tree bindings.
Revert most of the changes for BMA254 support in bma180 and move
BMA254 over to bmc150-accel. This has the following advantages:
- Support for motion trigger/interrupt
- Fix incorrect scale values (BMA254 currently uses the same as
BMA250 but actually they're different because of 10 vs 12 bits
data size)
- Less code than before :)
BMA250 could be potentially also moved but it's more complicated
because its chip_id conflicts with the one for BMA222 in bmc150-accel.
Perhaps there are also other register differences, I did not investigate
further yet (and I have no way to test it).
Cc: Peter Meerwald <pmeerw@pmeerw.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20210611080903.14384-11-stephan@gerhold.net
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The Kconfig option currently says that all Bosch accelerometers
supported by the bmc150-accel driver are combo chips with both
accelerometer and magnetometer. This is wrong: actually only BMC150
is such a combo. The BMA* variants only contain an accelerometer
and the BMI055 actually is a accelerometer + gyroscope combo.
Clarify this in the help text and also make the list of supported
variants complete and sorted for consistency.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20210611080903.14384-3-stephan@gerhold.net
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
During commit 067fda1c06 ("iio: hid-sensors: move triggered buffer
setup into hid_sensor_setup_trigger"), the
iio_triggered_buffer_{setup,cleanup}() functions got moved under the
hid-sensor-trigger module.
The above change works fine, if any of the sensors get built. However, when
only the common hid-sensor-trigger module gets built (and none of the
drivers), then the IIO_TRIGGERED_BUFFER symbol isn't selected/enforced.
Previously, each driver would enforce/select the IIO_TRIGGERED_BUFFER
symbol. With this change the HID_SENSOR_IIO_TRIGGER (for the
hid-sensor-trigger module) will enforce that IIO_TRIGGERED_BUFFER gets
selected.
All HID sensor drivers select the HID_SENSOR_IIO_TRIGGER symbol. So, this
change removes the IIO_TRIGGERED_BUFFER enforcement from each driver.
Fixes: 067fda1c06 ("iio: hid-sensors: move triggered buffer setup into hid_sensor_setup_trigger")
Reported-by: Thomas Deutschmann <whissi@gentoo.org>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20210414084955.260117-1-aardelean@deviqon.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add basic support for the Bosch Sensortec BMA400 3-axes ultra-low power
accelerometer when configured to use SPI.
Signed-off-by: Dan Robertson <dan@dlrobertson.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The bma023 chip is similar enough to the bma180 and bma25x that the
same driver can support all of them. The biggest differences are
the lack of a temperature channel and no low power but still working
mode.
The bma150 is a close relative of the bma023, but it does have a
temperature channel so support is not added for it.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Bakker <xc-racer2@live.ca>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The bma180 IIO driver is being extended for support for the chips
support by input's bma150 driver (bma023, bma150, smb380). Don't
allow both drivers to be enabled simultaneously as they're for the
same hardware.
Signed-off-by: Jonathan Bakker <xc-racer2@live.ca>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This adds support for the BMA254 variant of this
accelerometer. The only difference for the simple IIO
driver is that values are 12 bit and the temperature
offset differs by 1 degree.
Whilst wildcards in naming are normally frowned upon:
The cases where I have labeled variables "25x" is where the
models are identical, so as to make things easier for people
that want to add support for BMA253 and BMA255.
Cc: Peter Meerwald <pmeerw@pmeerw.net>
Cc: Oleksandr Kravchenko <o.v.kravchenko@globallogic.com>
Cc: devicetree@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add a IIO driver for the Bosch BMA400 3-axes ultra-low power accelerometer.
The driver supports reading from the acceleration and temperature
registers. The driver also supports reading and configuring the output data
rate, oversampling ratio, and scale.
Signed-off-by: Dan Robertson <dan@dlrobertson.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Remove duplicate code in cros-ec-accel-legacy,
use cros-ec-sensors-core functions and structures when possible.
On glimmer, check the 2 accelerometers are presented and working.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Formatting of Kconfig files doesn't look so pretty, so just
take damp cloth and clean it up.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The adxl372 is designed to communicate in either SPI or I2C protocol. It
autodetects the format being used, requiring no configuration control to
select the format.
Signed-off-by: Stefan Popa <stefan.popa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This patch restructures the existing adxl372 driver by adding a module for
SPI and a header file, while the baseline module deals with the chip-logic.
This is a necessary step, as this driver should support in the future
a similar device which differs only in the type of interface used (I2C
instead of SPI).
Signed-off-by: Stefan Popa <stefan.popa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add driver to support older EC firmware that only support deprecated
ec command. Rely on ACPI memory map register to access sensor
information.
Present same interface as the regular cros_ec sensor stack:
- one iio device per accelerometer
- use HTML5 axis definition
- use iio abi units
- accept calibration calls, but do nothing
Chrome can use the same code than regular cros_ec sensor stack to
calculate orientation and lid angle.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
KXTF9 has mostly compatible register layout to KXCJK accelerometer.
There is no motion direction interrupt support, but there is tap
direction detection instead (not implemented in this patch).
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add SPI driver that initializes SPI regmap for the adxl345 core driver.
The driver supports the same functionality as I2C namely the x, y, z and
scale readings.
Signed-off-by: Eva Rachel Retuya <eraretuya@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Move I2C-specific code into its own file and rely on regmap to access
registers. The core code provides access to x, y, z and scale readings.
Signed-off-by: Eva Rachel Retuya <eraretuya@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Convert the driver to use regmap instead of I2C-specific functions. This
is done in preparation for splitting this driver into core and
I2C-specific code as well as introduction of SPI driver.
Signed-off-by: Eva Rachel Retuya <eraretuya@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
