Use `\t(\{ ?\},|\{\}|\{\s*/\*.*\*/\s*\},?)$` regex to find and replace
the array sentinel in all IIO drivers to the same style.
For some time, we've been trying to consistently use `{ }` (no trailing
comma, no comment, one space between braces) for array sentinels in the
IIO subsystem. Still nearly 50% of existing code uses a different style.
To save reviewers from having to request this trivial change as
frequently, let's normalize the style in all existing IIO drivers.
At least when code is copy/pasted to new drivers, the style will be
consistent.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://patch.msgid.link/20250411-iio-sentinel-normalization-v1-1-d293de3e3d93@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use regmap cache to replace the maintenance of the interrupt mapping
state by a member variable intio. The interrupt mapping is initialized
when the driver is probed, and it is perfectly cacheable.
The patch will still leave the function set_interrupts(). A follow up
patch takes care of it, when cleaning up the INT enable register
variable.
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Link: https://patch.msgid.link/20250313165049.48305-2-l.rubusch@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reorganize the IRQ handler. Move the overrun handling to the bottom.
Overrun leads to reset the interrupt register. This also happens at
evaluation of a particular interrupt event. First evaluate an event
if possible, then fall back to overrun handling. Additionally simplify
fetching the interrupt status function.
Both is in preparation to build interrupt handling up for the handling
of different detected events, implemented in follow up patches.
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Link: https://patch.msgid.link/20250220104234.40958-4-l.rubusch@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reorder the claiming of direct mode and runtime pm calls to simplify
handling a little. For correct error handling, after the reorder
iio_device_release_direct_mode() must be claimed in an error occurs
in pm_runtime_resume_and_get()
Fixes: 1ca2cfbc0c ("iio: add MEMSensing MSA311 3-axis accelerometer driver")
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250217140135.896574-7-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
If a match was not found, then the write_raw() callback would return
the odr index, not an error. Return -EINVAL if this occurs.
To avoid similar issues in future, introduce j, a new indexing variable
rather than using ret for this purpose.
Fixes: 79de2ee469 ("iio: accel: mma8452: claim direct mode during write raw")
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250217140135.896574-2-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This complex cleanup.h use case of conditional guards has proved
to be more trouble that it is worth in terms of false positive compiler
warnings and hard to read code.
Move directly to the new claim/release_direct() that allow sparse
to check for unbalanced context
In some cases there is a convenient wrapper function to which
the handling can be moved. Do that instead of introducing
another layer of wrappers. In others an outer wrapper is added
which claims direct mode, runs the original function with the
scoped claim logic removed, releases direct mode and then checks
for errors.
Cc: Cosmin Tanislav <demonsingur@gmail.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20250209180624.701140-9-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add a basic setup for FIFO with configurable watermark. Add a handler
for watermark interrupt events and extend the channel for the
scan_index needed for the iio channel. The sensor is configurable to use
a FIFO_BYPASSED mode or a FIFO_STREAM mode. For the FIFO_STREAM mode now
a watermark can be configured, or disabled by setting 0. Further features
require a working FIFO setup.
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Link: https://patch.msgid.link/20241228232949.72487-4-l.rubusch@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The kx022a driver supports a few different HW variants. A chip-info
structure is used to describe sensor specific details. Support for
sensors with different measurement g-ranges was added recently,
introducing sensor specific scale arrays.
The members of the chip-info structure have been documented using
kerneldoc. The newly added members omitted the documentation. It is nice
to have all the entries documented for the sake of the consistency.
Furthermore, the scale table format may not be self explatonary, nor how
the amount of scales is informed.
Add documentation to scale table entries to maintain consistency and to
make it more obvious how the scales should be represented.
Suggested-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Link: https://patch.msgid.link/Z1LDUj-naUdGSM6n@mva-rohm
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The register interface of the ROHM KX134ACR-LBZ accelerometer is almost
identical to the KX132ACR-LBZ. Main difference between these
accelerometers is that the KX134ACR-LBZ supports G-ranges +/- 8, 16,
32 and 64G. All the other sensors supported by the kx022a driver can
measure +/- 2, 4, 8 and 16G.
Prepare supporting the KX134ACR-LBZ with different G-ranges by storing
a pointer to the scale tables in IC specific structure.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://patch.msgid.link/fc667b1495adf4e3f29ecbb336495c1f18b47e61.1732783834.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Jonathan writes:
IIO: 2nd set of new device support, features and cleanup for 6.13
Alongside new drivers and device support there are several large
cleanups going on across the IIO tree and we see part of some of those
in this pull request.
Merged char-misc-next at point of 6.12-rc6 merge to avoid a
conflict with a fix for the ad7380 merged earlier this cycle.
Note that I previously messed this merge up and had to reconstruct
it this morning so a coherent pull request was possible. The new
stuff is all the same as has been in linux-next for some time with
the exception of the kernel-doc related __private ordering fix
that went in yesterday.
New device support
==================
adi,ad7380
- Support for adaq4370-4 and adaq4370 quad channel ADCs.
adi,ad7606
- Various cleanups preceeding support of AD7607, AD7608 and AD7609 ADCs.
adi,ad7779
- New driver supproting AD7770, AD7771 and AD7779 ADCs.
allegro,als31300
- New driver for this 3D Linear Hall Effect sensor.
bosch,bmi270
- Add support BMI260 which is similar but requires a different firmware image.
bosch,smi240
- New driver for this IMU.
ti,opt3001
- Add support opt3002 light sensor which has a wider spectral range than
the opt3001.
vishay,veml3235
- New driver for this ambient light sensor.
Features
========
hid-sensors
- Add support Human Proximity Range and Attention detection (requiring
a new classification style channel type)
adi,ad3552r
- Add backend support and related platform driver to support use
with an FPGA IP to allow QSPI + DDR bus operation and much higher
data aquisition rates. (various rework preceeded this feature)
adi,ad7606
- Various cleanup prior to enabling use with an IIO Backend and PWM trigger
enabling much higher speed data capture.
bosch,bme680
- Support control of preheat current
- Support triggered buffer capture
- Add SCALE and RAW channels (needed to enable the buffered capture).
bosch,bmp280
- Enable sleeping to save power.
- Add interrupt support for bmp3xx and bmp5xx devices. Also update bmp085
to new approach.
- Enable data ready trigger.
bosch,bmi270
- Add triggered buffer support
- Add scale and sampling frequency control.
vishay,veml6070
- Support integration time via DT binding for an external resistor value.
Cleanup and minor fixes
=======================
core
- Fix a longstanding issue with event codes for differential channels.
Note that not all drivers are yet fixed, but macros have been added
to avoid potential repeats of this in future.
- Tidy up handling in iio_read_acpi_mount matrix.
- Mark iio_dev::priv with __private. Later move the marking before the
field name to avoid a kernel-doc issue.
treewide
- Drop some pointless default n entries in Kconfig.
- Add an iio_get_acpi_device_name_and_data() handler to replace some
commonly repeated code.
- simplify use of 'state' in write_event_config() callback as it is
effectively a boolean. Once done make it a boolean (lots of drivers
were updated to enable this)
- some more use of devm_regulator_get_enable_read_voltage( to replace
open coded versions. Where this enables it convert all of remove
handling to devm based and drop the remove callback.
- check returns from devm_mutex_init()
accel drivers
- Use aligned_s64 instead of s64 __aligned(8)
adi,ad5791
- Add some missing GPIOs and power supplies that presumably were always
hard wired on previous boards.
- Refactor to use chip_info in device id tables.
- Convert probe entirely to devm based simplify code and allowing remove()
callback to be dropped.
adi,ad7192
- Check return from spi_get_device_match_data()
adi,ad74413r
- Don't keep an unnecessary copy of the gpio after probe.
- Use devm_regulator_get_enable_read_voltage() instead of open coding.
- Apply cleanup.h approach to reduce complexity.
adi,dac8460
- Fix a wrong compaitble ID due to a stray space.
- Add an spi_device_id table.
bosch,bmc150
- Drop some likely false ACPI IDs.
- Drop left over unused ACPI specific code.
bosch,bme680
- Add mising regmap.h include.
- Reduce excessive sleep on startup.
- Drop some cammelcase usage.
- Use fsleep
- Generalize read functions to allow for reuse.
- Use s16 variable to avoid some incorrect casting
bosch,bmg150
- Drop some likely false ACPI IDs.
bosch,bmi270
- Drop unused FREQUENCY and SCALE attributes that always returned an
error (they wil be back impelmented correctly).
- Factor out the chip specific data into a structure to enable simple
support for additional devices.
isil,isl29018
- Drop ACPI_PTR() and CONFIG_ACPI guards as not worth the trouble for very
minor saving.
invensense,mpu6050
- Use much simpler test for ACPI firmware.
kionix,kxcjk-1013
- Drop unnecessary ACPI entry in the i2c_device_id table.
- Drop support KX022-1020 to fix a bug that was introduced with that change.
Hopefully a fixed version will replace it soon.
- Drop CONFIG guards for PM in favor of pm_ptr() and the compiler removing
dead code.
- Switch from enum to chip_info structure and add ODR times to that structure.
- Deduplicate one of those ODR structures
- Drop ACPI_PTR() and move ID table out of config guards.
- Minor additional cleanup.
liteon,ltr401
- Drop some likely false ACPI Ids and add LTER0303 which is know to be in use.
microchip,pac1934
- Use much simpler test for ACPI firmware.
vishay,veml6070
- Use unsigned int instead of just unsigned.
- Use FIELD_PREP to make setting of field value explicit.
Various other minor fixes to documentation
* tag 'iio-for-6.13b' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (153 commits)
iio: Move __private marking before struct element priv in struct iio_dev
docs: iio: ad7380: add adaq4370-4 and adaq4380-4
iio: adc: ad7380: add support for adaq4370-4 and adaq4380-4
iio: adc: ad7380: use local dev variable to shorten long lines
iio: adc: ad7380: fix oversampling formula
dt-bindings: iio: adc: ad7380: add adaq4370-4 and adaq4380-4 compatible parts
iio: chemical: bme680: Add support for preheat current
iio: chemical: bme680: Add triggered buffer support
iio: chemical: bme680: Add SCALE and RAW channels
iio: chemical: bme680: refactorize set_mode() mode
iio: events: make IIO_EVENT_CODE macro private
iio: accel: mma9553: use specialized event code macros
iio: dummy: use specialized event code macros
iio: adc: ad7280a: use IIO_DIFF_EVENT_CODE macro helper
iio: events.h: add event identifier macros for differential channel
iio: magnetometer: add Allegro MicroSystems ALS31300 3-D Linear Hall Effect driver
dt-bindings: iio: magnetometer: document the Allegro MicroSystems ALS31300 3-D Linear Hall Effect Sensor
dt-bindings: vendor-prefixes: Add Allegro MicroSystems, Inc
iio: light: apds9960: remove useless return
iio: light: apds9960: convert als_int and pxs_int to bool
...
Jonathan writes:
IIO: 3rd set of fixes for the 6.12 cycle
Usual mixed bag of new issues from this cycle and ancient bugs
recently noticed.
core
- Fix wrong fwnode handle if __fwnode_iio_channel_get_by_name()
looks at parents of the provider node.
core,backend
- Fix a wrong pointer error check.
gts library
- Fix plausible corner case where the value returned was not set.
- Avoid near infinite loop if the size of the table is 0.
(neither are an issue for current drivers).
adi,ad4000
- Fix reading of unsigned channels that were returning garbage.
adi,ad7780
- Prevent a division by zero.
adi,ad7923
- Fix buffer overflows in arrays that were not resized when devices
with more channels were added to the driver.
adi,adxl380
- Check only for negative error codes rather than including the
positive channel read values in an error check.
invense,common
- Fix an issue where changing the sampling rate to another value and
back again whilst the FIFO was off would not update things correctly.
kionix,kx022a
- Fix failure to sign extend value read from device.
* tag 'iio-fixes-for-6.12c' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
iio: Fix fwnode_handle in __fwnode_iio_channel_get_by_name()
iio: accel: adxl380: fix raw sample read
iio: accel: kx022a: Fix raw read format
iio: gts: fix infinite loop for gain_to_scaletables()
iio: gts: Fix uninitialized symbol 'ret'
iio: adc: ad4000: fix reading unsigned data
ad7780: fix division by zero in ad7780_write_raw()
iio: adc: ad7923: Fix buffer overflow for tx_buf and ring_xfer
iio: backend: fix wrong pointer passed to IS_ERR()
iio: invensense: fix multiple odr switch when FIFO is off
write_event_config callback use an int for state, but it is actually a
boolean. iio_ev_state_store is actually using kstrtobool to check user
input, then gives the converted boolean value to write_event_config.
Fix signature and update all iio drivers to use the new signature.
This patch has been partially written using coccinelle with the
following script:
$ cat iio-bool.cocci
// Options: --all-includes
virtual patch
@c1@
identifier iioinfo;
identifier wecfunc;
@@
static const struct iio_info iioinfo = {
...,
.write_event_config =
(
wecfunc
|
&wecfunc
),
...,
};
@@
identifier c1.wecfunc;
identifier indio_dev, chan, type, dir, state;
@@
int wecfunc(struct iio_dev *indio_dev, const struct iio_chan_spec *chan, enum iio_event_type type, enum iio_event_direction dir,
-int
+bool
state) {
...
}
make coccicheck MODE=patch COCCI=iio-bool.cocci M=drivers/iio
Unfortunately, this script didn't match all files:
* all write_event_config callbacks using iio_device_claim_direct_scoped
were not detected and not patched.
* all files that do not assign and declare the write_event_config
callback in the same file.
iio.h was also manually updated.
The patch was build tested using allmodconfig config.
cc: Julia Lawall <julia.lawall@inria.fr>
Signed-off-by: Julien Stephan <jstephan@baylibre.com>
Link: https://patch.msgid.link/20241031-iio-fix-write-event-config-signature-v2-7-2bcacbb517a2@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
