Srinivas Kandagatla
|
d47abee9fe
|
ASoC: dt-bindings: wsa8840: Document port mapping property
Document port mapping property for wsa884x. Port mapping is required
to be able map correct master ports.
All the device ports are not mapped in same order as master ports, so
there is a need for having static port mapping for WSA codecs.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://patch.msgid.link/20240626-port-map-v2-3-6cc1c5608cdd@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
2024-07-01 14:53:24 +01:00 |
|
Krzysztof Kozlowski
|
26c8a435fc
|
ASoC: dt-bindings: qcom,wsa8840: Add reset-gpios for shared line
On newer Qualcomm platforms, like X1E80100-CRD, the WSA884x speakers
share SD_N GPIOs between two speakers, thus a coordinated assertion is
needed. Linux supports handling shared GPIO lines through "reset-gpios"
property, thus allow specifying either powerdown or reset GPIOs (these
are the same).
Cc: Bartosz Golaszewski <brgl@bgdev.pl>
Cc: Sean Anderson <sean.anderson@seco.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240129115216.96479-6-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
2024-02-21 13:02:53 +00:00 |
|
Krzysztof Kozlowski
|
dc29d3d253
|
ASoC: dt-bindings: use "soundwire" as controller's node name in examples
Soundwire Devicetree bindings expect the Soundwire controller device
node to be named just "soundwire". Correct examples, so the incorrect
code will not be re-used.
Reported-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231107101610.13728-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
2023-11-13 01:26:15 +00:00 |
|
Krzysztof Kozlowski
|
97ae6f4e5d
|
ASoC: dt-bindings: qcom,wsa8840: Add WSA884x family of speakers
Add binding for WSA8840/WSA8845/WSA8845H smart speaker amplifiers used
in Qualcomm QRD8550 board with SM8550 SoC.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230616115751.392886-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
2023-06-21 13:42:49 +01:00 |
|