mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/herbert/cryptodev-2.6.git
synced 2026-04-18 03:23:53 -04:00
c8a9a647532f5c2a04180352693215e24e9dba03
40579 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Aleksander Jan Bajkowski
|
1e84df6ccf |
dt-bindings: crypto: inside-secure,safexcel: add compatible for MT7981
The MT7981 as well as the MT7986 have a built-in EIP-97 crypto accelerator. This commit adds a compatible string for MT7981. Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
|
Robert Marko
|
25ab621f7d |
dt-bindings: rng: atmel,at91-trng: add microchip,lan9691-trng
Document Microchip LAN969X TRNG compatible. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Acked-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
|
Abel Vesa
|
618195a7ac |
dt-bindings: crypto: qcom,inline-crypto-engine: Document the Eliza ICE
Document the Inline Crypto Engine (ICE) on the Eliza platform. Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
|
Abhinaba Rakshit
|
1eb6c478f1 |
dt-bindings: crypto: ice: add operating-points-v2 property for QCOM ICE
Add support for specifying OPPs for the Qualcomm Inline Crypto Engine by allowing the use of the standard "operating-points-v2" property in the ICE device node. ICE clock management was handled by the storage drivers in legacy bindings, so the ICE driver itself had no mechanism for clock scaling. With the introduction of the new standalone ICE device node, clock control must now be performed directly by the ICE driver. Enabling operating-points-v2 allows the driver to describe and manage the frequency and voltage requirements for proper DVFS operation. Acked-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Abhinaba Rakshit <abhinaba.rakshit@oss.qualcomm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
|
Linus Torvalds
|
5f2eac7767 |
Merge tag 'rtc-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni: - loongson: Loongson-2K0300 support - s35390a: nvmem support - zynqmp: rework calibration * tag 'rtc-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: rtc: ds1390: fix number of bytes read from RTC rtc: class: Remove duplicate check for alarm rtc: optee: simplify OP-TEE context match rtc: interface: Alarm race handling should not discard preceding error rtc: s35390a: implement nvmem support rtc: loongson: Add Loongson-2K0300 support dt-bindings: rtc: loongson: Document Loongson-2K0300 compatible dt-bindings: rtc: loongson: Correct Loongson-1C interrupts property dt-bindings: rtc: renesas,rz-rtca3: Add RZ/V2N support dt-bindings: rtc: cpcap: convert to schema rtc: zynqmp: use dynamic max and min offset ranges rtc: zynqmp: rework set_offset rtc: zynqmp: rework read_offset rtc: zynqmp: check calibration max value rtc: zynqmp: correct frequency value rtc: amlogic-a4: Remove IRQF_ONESHOT rtc: pcf8563: use correct of_node for output clock rtc: max31335: use correct CONFIG symbol in IS_REACHABLE() rtc: nvvrs: Add ARCH_TEGRA to the NV VRS RTC driver |
||
|
Linus Torvalds
|
99e447220b |
Merge tag 'i2c-for-7.0-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull more i2c updates from Wolfram Sang: "Designware: - refactor the transfer path to support I2C_M_STOP - handle pm runtime by using the active auto try macros - handle controllers lacking explicit START and STOP conditions - general cleanups Other i2c drivers: - qualcomm: add support for qcs8300-cci - amd8111: general cleanups - cp2112: add DT bindings" * tag 'i2c-for-7.0-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: dt-bindings: i2c: Add CP2112 HID USB to SMBus Bridge i2c: amd8111: switch to devm_ functions i2c: amd8111: Remove spaces in MODULE_* macros i2c: designware-platdrv: fix cleanup on probe failure i2c: designware-platdrv: simplify reset control dt-bindings: i2c: qcom-cci: Document qcs8300 compatible i2c: designware: Remove dead code in AMD ISP case i2c: designware: Support of controller with IC_EMPTYFIFO_HOLD_MASTER disabled i2c: designware: Use runtime PM macro for auto-cleanup i2c: designware: Implement I2C_M_STOP support |
||
|
Linus Torvalds
|
bc1d4e705f |
Merge tag 'sound-fix-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai: "Here are a bunch of updates, but there should be no big surprises; mostly device-specific quirks and fix-ups or non-code changes: - Quirks for ASoC AMD, HD-audio and USB-audio - Fixes in ASoC fsl, rockchip, renesas, aw codecs - Fixes for USB-audio packet handling in the implicit feedback mode - Updates of SPDX license IDs in some files" * tag 'sound-fix-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (28 commits) ASoC: rockchip: i2s-tdm: Use param rate if not provided by set_sysclk ALSA: hda/hdmi: Add quirk for TUXEDO IBS14G6 ASoC: dt-bindings: asahi-kasei,ak5558: Fix the supply names ASoC: dt-bindings: asahi-kasei,ak4458: Fix the supply names ASoC: dt-bindings: asahi-kasei,ak4458: set unevaluatedProperties:false ASoC: amd: amd_sdw: add machine driver quirk for Lenovo models ASoC: amd: acp: Add ACP7.0 match entries for Realtek parts ALSA: echoaudio: Add SPDX ids to some files ALSA: isa: Add SPDX id lines to some files ALSA: core: Add SPDX license id to files ASoC: tas2783A: add explicit port prepare handling ASoC: renesas: rz-ssi: Fix playback and capture ALSA: hda/realtek: Fix headset mic on ASUS Zenbook 14 UX3405MA ALSA: hda/conexant: Fix headphone jack handling on Acer Swift SF314 ASoC: qcom: sm8250: Add quinary MI2S support ASoC: amd: yc: Add DMI quirk for ASUS Vivobook Pro 15X M6501RR ALSA: usb-audio: Avoid potentially repeated XRUN error messages ALSA: usb-audio: Add sanity check for OOB writes at silencing ALSA: usb-audio: Optimize the copy of packet sizes for implicit fb handling ALSA: usb-audio: Update the number of packets properly at receiving ... |
||
|
Wolfram Sang
|
709cc48d3d | Merge branch 'i2c/i2c-host-2' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow | ||
|
Shengjiu Wang
|
80ca113671 |
ASoC: dt-bindings: asahi-kasei,ak5558: Fix the supply names
In the original txt format binding document ak4458.txt, the supply names
are 'AVDD-supply', 'DVDD-supply', and they are also used in driver. But in
the commit converting to yaml format, they are changed to 'avdd-supply',
'dvdd-supply'. After search all the dts file, these names 'AVDD-supply',
'DVDD-supply', 'avdd-supply', 'dvdd-supply' are not used in any dts
file. So it is safe to fix the yaml binding document.
Fixes:
|
||
|
Shengjiu Wang
|
e570a5ca30 |
ASoC: dt-bindings: asahi-kasei,ak4458: Fix the supply names
In the original txt format binding document ak4458.txt, the supply names
are 'AVDD-supply', 'DVDD-supply', and they are also used in driver. But in
the commit converting to yaml format, they are changed to 'avdd-supply',
'dvdd-supply'. After search all the dts file, these names 'AVDD-supply',
'DVDD-supply', 'avdd-supply', 'dvdd-supply' are not used in any dts
file. So it is safe to fix this yaml binding document.
Fixes:
|
||
|
Shengjiu Wang
|
50a634f1d7 |
ASoC: dt-bindings: asahi-kasei,ak4458: set unevaluatedProperties:false
When including the dai-common.yaml, and allow '#sound-dai-cells' and
"sound-name-prefix' to be used, should use unevaluatedProperties:false
according to writing-bindings.rst.
Fixes:
|
||
|
Linus Torvalds
|
e81dd54f62 |
Merge tag 'dmaengine-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul: "Core: - Add Frank Li as susbstem reviewer to help with reviews New Support: - Mediatek support for Dimensity 6300 and 9200 controller - Qualcomm Kaanapali and Glymur GPI DMA engine - Synopsis DW AXI Agilex5 - Renesas RZ/V2N SoC - Atmel microchip lan9691-dma - Tegra ADMA tegra264 Updates: - sg_nents_for_dma() helper use in subsystem - pm_runtime_mark_last_busy() redundant call update for subsystem - Residue support for xilinx AXIDMA driver - Intel Max SGL Size Support and capabilities for DSA3.0 - AXI dma larger than 32bits address support" * tag 'dmaengine-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (64 commits) dmaengine: add Frank Li as reviewer dt-bindings: dma: qcom,gpi: Update max interrupts lines to 16 dmaengine: fsl-edma: don't explicitly disable clocks in .remove() dmaengine: xilinx: xdma: use sg_nents_for_dma() helper dmaengine: sh: use sg_nents_for_dma() helper dmaengine: sa11x0: use sg_nents_for_dma() helper dmaengine: qcom: bam_dma: use sg_nents_for_dma() helper dmaengine: qcom: adm: use sg_nents_for_dma() helper dmaengine: pxa-dma: use sg_nents_for_dma() helper dmaengine: lgm: use sg_nents_for_dma() helper dmaengine: k3dma: use sg_nents_for_dma() helper dmaengine: dw-axi-dmac: use sg_nents_for_dma() helper dmaengine: bcm2835-dma: use sg_nents_for_dma() helper dmaengine: axi-dmac: use sg_nents_for_dma() helper dmaengine: altera-msgdma: use sg_nents_for_dma() helper scatterlist: introduce sg_nents_for_dma() helper dmaengine: idxd: Add Max SGL Size Support for DSA3.0 dmaengine: idxd: Expose DSA3.0 capabilities through sysfs dmaengine: sh: rz-dmac: Make channel irq local dmaengine: pl08x: Fix comment stating the difference between PL080 and PL081 ... |
||
|
Linus Torvalds
|
9b725d5959 |
Merge tag 'phy-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy updates from Vinod Koul:
"Core:
- Add suuport for "rx-polarity" and "tx-polarity" device tree
properties and phy common properties to manage this
New Support:
- Qualcomm Glymur PCIe Gen4 2-lanes PCIe phy, DP and edp phy, USB UNI
PHY and SMB2370 eUSB2 repeater. SC8280xp QMP UFS PHY, Kaanapali
PCIe phy and QMP PHY, QCS615 QMP USB3+DP PHY and driver support for
that.
- SpacemiT PCIe/combo PHY and K1 USB2 PHY driver.
- HDMI 2.1 FRL configuration support and driver enabling for rockchip
samsung-hdptx driver
- TI TCAN1046 phy
- Renesas RZ/V2H(P) and RZ/V2N usb3
- Mediatek MT8188 hdmi-phy
- Google Tensor SoC USB PHY driver
- Apple Type-C PHY
Updates:
- Subsystem conversion for clock round_rate() to determine_rate()
- TI USB3 DT schema conversion
- Samsung ExynosAutov920 usb3, combo hsphy and ssphy support"
* tag 'phy-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (143 commits)
phy: ti: phy-j721e-wiz: convert from divider_round_rate() to divider_determine_rate()
dt-bindings: phy: ti,control-phy-otghs: convert to DT schema
dt-bindings: phy: ti,phy-usb3: convert to DT schema
phy: tegra: xusb: Remove unused powered_on variable
phy: renesas: rcar-gen3-usb2: add regulator dependency
phy: GOOGLE_USB: add TYPEC dependency
phy: enter drivers/phy/Makefile even without CONFIG_GENERIC_PHY
phy: renesas: rcar-gen3-usb2: Use mux-state for phyrst management
phy: renesas: rcar-gen3-usb2: Add regulator for OTG VBUS control
phy: renesas: rcar-gen3-usb2: Use devm_pm_runtime_enable()
phy: renesas: rcar-gen3-usb2: Factor out VBUS control logic
dt-bindings: phy: renesas,usb2-phy: Document RZ/G3E SoC
dt-bindings: phy: renesas,usb2-phy: Document mux-states property
dt-bindings: phy: renesas,usb2-phy: Document USB VBUS regulator
phy: rockchip: samsung-hdptx: Add HDMI 2.1 FRL support
phy: rockchip: samsung-hdptx: Extend rk_hdptx_phy_verify_hdmi_config() helper
phy: rockchip: samsung-hdptx: Switch to driver specific HDMI config
phy: rockchip: samsung-hdptx: Drop hw_rate driver data
phy: rockchip: samsung-hdptx: Compute clk rate from PLL config
phy: rockchip: samsung-hdptx: Cleanup *_cmn_init_seq lists
...
|
||
|
Linus Torvalds
|
4e15e81971 |
Merge tag 'soundwire-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire updates from Vinod Koul: - support for Qualcomm v2.2.0 controllers - bus method updates for .probe(), .remove() and .shutdown() and remove function return value updates - Avell B.ON dmi-quirks mapping - mark cs42l45 codec as wake capable * tag 'soundwire-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: soundwire: intel_ace2x: add SND_HDA_CORE dependency dt-bindings: soundwire: qcom: Add SoundWire v2.2.0 compatible soundwire: Use bus methods for .probe(), .remove() and .shutdown() soundwire: Make remove function return no value soundwire: dmi-quirks: add mapping for Avell B.ON (OEM rebranded of NUC15) soundwire: qcom: Use guard to avoid mixing cleanup and goto soundwire: intel_auxdevice: add cs42l45 codec to wake_capable_list |
||
|
Linus Torvalds
|
17f8d20093 |
Merge tag 'usb-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH: "Here is the "big" set of USB and Thunderbolt driver updates for 7.0-rc1. Overall more lines were removed than added, thanks to dropping the obsolete isp1362 USB host controller driver, always a nice change. Other than that, nothing major happening here, highlights are: - lots of dwc3 driver updates and new hardware support added - usb gadget function driver updates - usb phy driver updates - typec driver updates and additions - USB rust binding updates for syntax and formatting changes - more usb serial device ids added - other smaller USB core and driver updates and additions All of these have been in linux-next for a long time, with no reported problems" * tag 'usb-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (77 commits) usb: typec: ucsi: Add Thunderbolt alternate mode support usb: typec: hd3ss3220: Check if regulator needs to be switched usb: phy: tegra: parametrize PORTSC1 register offset usb: phy: tegra: parametrize HSIC PTS value usb: phy: tegra: return error value from utmi_wait_register usb: phy: tegra: cosmetic fixes dt-bindings: usb: renesas,usbhs: Add RZ/G3E SoC support usb: dwc2: fix resume failure if dr_mode is host usb: cdns3: fix role switching during resume usb: dwc3: gadget: Move vbus draw to workqueue context USB: serial: option: add Telit FN920C04 RNDIS compositions usb: dwc3: Log dwc3 address in traces usb: gadget: tegra-xudc: Add handling for BLCG_COREPLL_PWRDN usb: phy: tegra: add HSIC support usb: phy: tegra: use phy type directly usb: typec: ucsi: Enforce mode selection for cros_ec_ucsi usb: typec: ucsi: Support mode selection to activate altmodes usb: typec: Introduce mode_selection bit usb: typec: Implement mode selection usb: typec: Expose alternate mode priority via sysfs ... |
||
|
Linus Torvalds
|
3ad7945754 |
Merge tag 'tty-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial driver updates from Greg KH:
"Here is the small amount of tty and serial driver updates for 7.0-rc1.
Nothing major in here at all, just some driver updates and minor
tweaks and cleanups including:
- sh-sci serial driver updates
- 8250 driver updates
- attempt to make the tty ports have their own workqueue, but was
reverted after testing found it to have problems on some platforms.
This will probably come back for 7.1 after it has been reworked and
resubmitted
- other tiny tty driver changes
All of these have been in linux-next for a while with no reported
problems"
* tag 'tty-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (49 commits)
Revert "tty: tty_port: add workqueue to flip TTY buffer"
tty: tty_port: add workqueue to flip TTY buffer
serial: 8250_pci: Remove custom deprecated baud setting routine
serial: 8250_omap: Remove custom deprecated baud setting routine
dt-bindings: serial: renesas,scif: Document RZ/G3L SoC
serial: 8250: omap: set out-of-band wakeup if wakeup pinctrl exists
tty: hvc-iucv: Remove KMSG_COMPONENT macro
dt-bindings: serial: google,goldfish-tty: Convert to DT schema
dt-bindings: serial: sh-sci: Fold single-entry compatibles into enum
serial: 8250: 8250_omap.c: Clear DMA RX running status only after DMA termination is done
serial: 8250: 8250_omap.c: Add support for handling UART error conditions
serial: SH_SCI: improve "DMA support" prompt
serial: Kconfig: fix ordering of entries for menu display
serial: 8250: fix ordering of entries for menu display
serial: imx: change SERIAL_IMX_CONSOLE to bool
8250_men_mcb: drop unneeded MODULE_ALIAS
serial: men_z135_uart: drop unneeded MODULE_ALIAS
dt-bindings: serial: renesas,rsci: Document RZ/V2H(P) and RZ/V2N SoCs
serial: rsci: Convert to FIELD_MODIFY()
dt-bindings: serial: 8250: add SpacemiT K3 UART compatible
...
|
||
|
Linus Torvalds
|
505d195b0f |
Merge tag 'char-misc-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/IIO driver updates from Greg KH: "Here is the big set of char/misc/iio and other smaller driver subsystem changes for 7.0-rc1. Lots of little things in here, including: - Loads of iio driver changes and updates and additions - gpib driver updates - interconnect driver updates - i3c driver updates - hwtracing (coresight and intel) driver updates - deletion of the obsolete mwave driver - binder driver updates (rust and c versions) - mhi driver updates (causing a merge conflict, see below) - mei driver updates - fsi driver updates - eeprom driver updates - lots of other small char and misc driver updates and cleanups All of these have been in linux-next for a while, with no reported issues" * tag 'char-misc-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (297 commits) mux: mmio: fix regmap leak on probe failure rust_binder: return p from rust_binder_transaction_target_node() drivers: android: binder: Update ARef imports from sync::aref rust_binder: fix needless borrow in context.rs iio: magn: mmc5633: Fix Kconfig for combination of I3C as module and driver builtin iio: sca3000: Fix a resource leak in sca3000_probe() iio: proximity: rfd77402: Add interrupt handling support iio: proximity: rfd77402: Document device private data structure iio: proximity: rfd77402: Use devm-managed mutex initialization iio: proximity: rfd77402: Use kernel helper for result polling iio: proximity: rfd77402: Align polling timeout with datasheet iio: cros_ec: Allow enabling/disabling calibration mode iio: frequency: ad9523: correct kernel-doc bad line warning iio: buffer: buffer_impl.h: fix kernel-doc warnings iio: gyro: itg3200: Fix unchecked return value in read_raw MAINTAINERS: add entry for ADE9000 driver iio: accel: sca3000: remove unused last_timestamp field iio: accel: adxl372: remove unused int2_bitmask field iio: adc: ad7766: Use iio_trigger_generic_data_rdy_poll() iio: magnetometer: Remove IRQF_ONESHOT ... |
||
|
Linus Torvalds
|
57d76cecce |
Merge tag 'linux-watchdog-6.20-rc1' of git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck: - iTCO: Drop vendor support - s3c2410_wdt: Drop S3C2410 support - Convert mpc8xxx-wdt to YAML - Several small fixes and improvements * tag 'linux-watchdog-6.20-rc1' of git://www.linux-watchdog.org/linux-watchdog: dt-bindings: watchdog: qcom-wdt: Document Glymur watchdog dt-bindings: watchdog: Convert mpc8xxx-wdt to YAML dt-bindings: watchdog: samsung-wdt: Split if:then: and constrain more dt-bindings: watchdog: samsung-wdt: Drop S3C2410 watchdog: s3c2410_wdt: Drop S3C2410 support dt-bindings: watchdog: samsung-wdt: Define cluster constraints top-level watchdog: rzv2h_wdt: Discard pm_runtime_put() return value watchdog: rz: Discard pm_runtime_put() return values watchdog: Make API functions const correct watchdog: imx7ulp_wdt: handle the nowayout option watchdog: sbsa: Update the W_IIDR Implementer bit mask to 0xFFF watchdog: Always return time left until watchdog times out watchdog: iTCO: Drop vendor support watchdog: starfive-wdt: Fix PM reference leak in probe error path fix it87_wdt early reboot by reporting running timer |
||
|
Linus Torvalds
|
2228d9cf7a |
Merge tag 'leds-next-6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds
Pull LED updates from Lee Jones:
"New Support & Features:
- Add support for the TI LP5812 4x3 matrix RGB LED driver, including
autonomous animation engine control and extensive scan multiplexing
modes
- Add a new driver for the ams Osram AS3668 4-channel I2C LED
controller
- Extend the is31fl32xx driver to support the is31fl3293 variant,
which features 3 channels and 12-bit PWM resolution
Improvements & Fixes:
- Prevent the ExpressWire KTD2801 chip from entering an undefined
state by disabling interrupts during time-sensitive communication
- Ensure the Qualcomm LPG driver detects hardware write failures by
checking the return value of regmap_bulk_write() during LUT
programming
- Fix kernel-doc warnings in the lm3692x driver by documenting
missing struct members and standardizing the comment style
- Update the ExpressWire library to use fsleep() and unexport
internal-only functions
- Improve the is31fl32xx driver by reordering code to eliminate
unnecessary forward declarations
Cleanups & Refactoring:
- Simplify the LP55XX common LED driver by utilizing the
for_each_available_child_of_node_scoped() macro for more concise
node iteration
Device Tree Bindings Updates:
- Add new YAML bindings for the TI LP5860 and LP5812 LED controllers,
and the ams Osram AS3668
- Convert the TI LM3697 white LED driver binding to DT schema format
- Allow multicolor LED nodes to be named with numeric suffixes (e.g.,
multi-led-0) to handle multiple instances without unit addresses
- Document support for the PMH0101 variant in the Qualcomm LPG PWM
and SPMI Flash LED bindings
- Add the issi,is31fl3293 compatible string to the is31fl32xx
binding"
* tag 'leds-next-6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds:
dt-bindings: leds: Convert ti,lm3697 to DT schema
leds: as3668: Driver for the ams Osram 4-channel i2c LED driver
dt-bindings: leds: Add new as3668 support
docs: leds: Document TI LP5812 LED driver
leds: Add basic support for TI/National Semiconductor LP5812 LED Driver
leds: qcom-lpg: Check the return value of regmap_bulk_write()
dt-bindings: leds: qcom,spmi-flash-led: Add PMH0101 compatible
dt-bindings: leds: leds-qcom-lpg: Add support for PMH0101 PWM
dt-bindings: leds: Allow differently named multicolor LEDs
leds: lp55xx: Simplify with scoped for each OF child loop
dt-bindings: leds: add TI/National Semiconductor LP5812 LED Driver
leds: is31f132xx: Add support for is31fl3293
leds: is31f132xx: Re-order code to remove forward declarations
dt-bindings: leds: Add issi,is31fl3293 to leds-is31fl32xx
leds: expresswire: Fix chip state breakage
dt-bindings: leds: Add LP5860 LED controller
leds: lm3692x: Fix kernel-doc for struct lm3692x_led
|
||
|
Linus Torvalds
|
4bfa4a54b0 |
Merge tag 'backlight-next-6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight
Pull backlight updates from Lee Jones:
"New Support & Features:
- Add a new driver for the Congatec Board Controller (CGBC)
backlight, providing brightness control via the board controller's
PWM interface
Improvements & Fixes:
- Resolve build failures in the Awinic AW99706 driver by switching to
the correct GPIO consumer header
- Extend the Qualcomm WLED driver to support the specific
over-voltage protection (OVP) values required for the PMI8994 and
PMI8950 variants
Device Tree Bindings Updates:
- Document the device-specific over-voltage protection (OVP)
millivolt ranges and default values for Qualcomm PMI8994 and
PMI8950 WLED controllers"
* tag 'backlight-next-6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
backlight: qcom-wled: Change PM8950 WLED configurations
dt-bindings: backlight: qcom-wled: Document ovp values for PMI8950
backlight: qcom-wled: Support ovp values for PMI8994
dt-bindings: backlight: qcom-wled: Document ovp values for PMI8994
backlight: aw99706: Fix build errors caused by wrong gpio header
backlight: Add Congatec Board Controller (CGBC) backlight support
|
||
|
Linus Torvalds
|
4668c4831f |
Merge tag 'mfd-next-6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Support & Features:
- Add comprehensive support for the ROHM BD72720 PMIC, including core
MFD, regulator, GPIO, clock gate, RTC, and power-supply drivers
- Add support for the Rockchip RK801 PMIC, including core MFD and
regulator drivers
- Add support for the ROHM BD73900 PMIC by leveraging existing common
drivers
- Wire up RTC, hwmon, and input sub-devices for the Apple SMC
(macsmc) driver
- Add support for the Delta Networks TN48M switch CPLD via the
simple-mfd-i2c driver
- Add support for the TS133 variant to the QNAP MCU driver
- Provide support for the sama7d65 XLCD controller in the Atmel HLCDC
driver
- Add backlight sub-device support to the Congatec Board Controller
(cgbc)
- Add Intel Nova Lake-S (NVL-S) PCI IDs to the Intel LPSS driver
Improvements & Fixes:
- Implement a "wrapper regmap" for the ROHM BD72720 to handle dual
I2C slave addresses (0x4b and 0x4c) transparently for child devices
- Introduce mutex locking around 'mfd_of_node_list' in the MFD core
to ensure safe concurrent access
- Fix a potential regulator resource leak in the Arizona core driver
during boot sequence failures
- Resolve child device duplication issues on driver rebind for
Qualcomm PM8xxx and OMAP USB host drivers by using
of_platform_depopulate()
- Fix IRQ domain name duplication for the Samsung S2MPG10 by adding a
unique domain suffix
- Implement LOCK register handling for the TI TPS65214 variant to
unlock registers at probe time
- Fully convert the Loongson-2K BMC driver to use managed resources
(pcim) and the standard PCI resource API
- Ensure the Apple SMC mutex is correctly initialized during probe to
prevent NULL pointer dereferences
- Expand the ROHM BD71828 power-supply driver to support 9-bit
register addresses
- Simplify the Samsung S5M RTC driver by querying platform device IRQ
resources directly
- Revert an incorrect read-to-write mask change in the DA9052 SPI
driver to restore default OTP behavior
- Fix kernel-doc warnings in the TI TPS6105x driver
- Cleanups & Refactoring
- Simplify the MFD core by utilizing the scoped
for_each_child_of_node_scoped() macro and streamlining device_node
storage
- Rename ROHM BD71828 IC-specific entities to use consistent prefixes
for better extensibility
- Refactor ROHM BD71828 regmap definitions using the
regmap_reg_range() macro
- Update the ROHM BD71828 driver to use standard C-style comment
headers
- Remove the now unused 'irq_data' field from the Samsung SEC core
structure
- Drop unnecessary use of irqd_get_trigger_type() in the Maxim
MAX77759 driver
- Default MFD_SPACEMIT_P1 to 'm' if ARCH_SPACEMIT is selected
- Add missing charger-related registers to the ROHM BD71828 core
header and Type-C CC registers to the AXP717
Device Tree Binding Updates:
- Add new bindings for the ROHM BD72720 PMIC, Rockchip RK801 PMIC,
Bitmain BM1880 System Controller, and NXP LPC32xx System Control
Block
- Clarify trickle-charge terminology and add properties for voltage
drop (VDR) correction and upper charge limits to the generic
battery binding
- Document GPR syscon for NXP S32 SoCs and the smp-memram subnode for
Aspeed SCU
- Document numerous new Qualcomm SPMI PMIC compatibles (pmcx0102,
pmh0101, pmk8850, etc)
- Add compatibles for the sama7d65 XLCD (Atmel), LAN9691 Flexcom
(Microchip), and various MediaTek SCPSYS and regulator components
- Fix a dead link to the audio codec binding in the DA9055
documentation"
* tag 'mfd-next-6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (41 commits)
dt-bindings: mfd: da9055: Fix dead link to codec binding
mfd: cgbc: Add support for backlight
dt-bindings: mfd: qcom,spmi-pmic: Document PMICs present on Glymur and Kaanapali
dt-bindings: mfd: Document smp-memram subnode for aspeed,ast2x00-scu
mfd: intel-lpss: Add Intel Nova Lake-S PCI IDs
mfd: ls2kbmc: Use PCI API instead of direct accesses
mfd: ls2kbmc: Fully convert to use managed resources
dt-bindings: mfd: mediatek: mt6397: Add missing MT6331 regulator compat
dt-bindings: mfd: mediatek,mt8195-scpsys: Add mediatek,mt6795-scpsys
dt-bindings: mfd: atmel,sama5d2-flexcom: Add microchip,lan9691-flexcom
mfd: omap-usb-host: Fix OF populate on driver rebind
mfd: qcom-pm8xxx: Fix OF populate on driver rebind
dt-bindings: mfd: syscon: Allow syscon compatible for mediatek,mt7981-topmisc
mfd: qnap-mcu: Add driver data for TS133 variant
dt-bindings: mfd: qnap,ts433-mcu: Add qnap,ts133-mcu compatible
mfd: sec: Fix IRQ domain names duplication
mfd: simple-mfd-i2c: Add Delta TN48M CPLD support
mfd: macsmc: Initialize mutex
dt-bindings: mfd: nxp: Add NXP LPC32xx System Control Block
mfd: Kconfig: Default MFD_SPACEMIT_P1 to 'm' if ARCH_SPACEMIT
...
|
||
|
Linus Torvalds
|
46a1daac56 |
Merge tag 'pinctrl-v7.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"Core changes:
- Drop the unused devm_pinctrl_unregister() function
- Move pretended generic pin control functionality out of the core
and into the Amlogic AM4 driver. We have something better coming
(hopefully)
New hardware support:
- Spacemit K3 (RISC-V) pin control support
- Atmel AT91 PIO4 (ARM32) SAMA7D65 pin control support
- Exynos9610 (ARM64) pin control support
- Qualcomm Mahua TLMM (ARM64) pin control support
- Microchip Polarfire MSSIO (RISC-V) pin control support
- Ocelot LAN9645XF (multiplatform) pin control support
Improvements:
- Using a few more guards for locking
- Various nonurgent fixes and tweaks"
* tag 'pinctrl-v7.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (73 commits)
pinctrl: generic: move function to amlogic-am4 driver
pinctrl: intel: Align Copyright note with corporate guidelines
pinctrl: mediatek: remove unused drv_offset field
pinctrl: canaan: k230: Fix NULL pointer dereference when parsing devicetree
pinctrl: single: fix refcount leak in pcs_add_gpio_func()
pinctrl: meson: amlogic-a4: Fix device node reference leak in bank helpers
pinctrl: qcom: sm8250-lpass-lpi: Fix i2s2_data_groups definition
pinctrl: core: Remove duplicate error messages
pinctrl: core: Simplify devm_pinctrl_*()
pinctrl: core: Remove unused devm_pinctrl_unregister()
dt-bindings: pinctrl: spacemit: fix drive-strength check warning
pinctrl: fix kismet issues with GENERIC_PINCTRL
pinctrl: tangier: Join tng_pinctrl_probe() into its wrapper
pinctrl: tangier: Remove duplicate error messages
pinctrl: lynxpoint: Remove duplicate error messages
pinctrl: cherryview: Remove duplicate error messages
pinctrl: baytrail: Remove duplicate error messages
pinctrl: intel: Remove duplicate error messages
pinctrl: equilibrium: Fix device node reference leak in pinbank_init()
dt-bindings: pinctrl: pinctrl-microchip-sgpio: add LAN969x
...
|
||
|
Linus Torvalds
|
bb7a3fc2c9 |
Merge tag 'i2c-for-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
- core: cleaner fwnode usage
- tegra: timing improvements and Tegra264 support
- lpi2c: fix SMBus block read NACK after byte count
- amd-mp2, designware, mlxbf, rtl9300, spacemit, tegra: cleanups
- designware:
- use a dedicated algorithm for AMD Navi
- replace magic numbers with named constants
- replace min_t() with min() to avoid u8 truncation
- refactor core to enable mode switching
- imx-lpi2c: add runtime PM support for IRQ and clock handling
- lan9691-i2c: add new driver
- rtl9300: use OF helpers directly and avoid fwnode handling
- spacemit: add bus reset support
- units: add HZ_PER_GHZ and use it in several i2c drivers
- at24 i2c eeprom:
- add a set of new compatibles to DT bindings
- use dev_err_probe() consistently in the driver
* tag 'i2c-for-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (46 commits)
i2c: imx-lpi2c: fix SMBus block read NACK after byte count
i2c: designware: Remove an unnecessary condition
i2c: designware: Enable mode swapping
i2c: designware: Combine the init functions
i2c: designware: Combine some of the common functions
i2c: designware: Use device_is_compatible() instead of custom approach
dt-bindings: eeprom: at24: Add compatible for Puya P24C128F
drivers/i2c/busses: use min() instead of min_t()
i2c: imx-lpi2c: Add runtime PM support for IRQ and clock management on i.MX8QXP/8QM
i2c: amd-mp2: clean up amd_mp2_find_device()
i2c: designware: Replace magic numbers with named constants
i2c: rtl9300: use of instead of fwnode
i2c: rtl9300: remove const cast
i2c: tegra: remove unused rst
i2c: designware: Remove not-going-to-be-supported code for Baikal SoC
i2c: spacemit: drop useless spaces
i2c: mlxbf: Use HZ_PER_KHZ in the driver
i2c: mlxbf: Remove unused bus speed definitions
i2c: core: Use dev_fwnode()
i2c: core: Replace custom implementation of device_match_fwnode()
...
|
||
|
Linus Torvalds
|
348e77b814 |
Merge tag 'input-for-v7.0-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov: - support for FocalTech FT8112 added to i2c-hid driver - support for FocalTech FT3518 added to edt-ft5x06 driver - support for power buttons in TWL603x chips added to twl4030-pwrbutton driver - an update to gpio-decoder driver to make it usable on non-OF platforms and to clean up the code - an update to synaptics_i2c driver switching it to use managed resources and a fix to restarting polling after resume - an update to gpio-keys driver to fall back to getting IRQ from resources if not specified using other means - an update to ili210x driver to support polling mode - a number of input drivers switched to scnprintf() to suppress truncation warnings - a number of updates and conversions of device tree bindings to yaml format - fixes to spelling in comments and messages in several drivers - other assorted fixups * tag 'input-for-v7.0-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (57 commits) dt-bindings: input: qcom,pm8941-pwrkey: Document PMM8654AU dt-bindings: input: touchscreen: imagis: allow linux,keycodes for ist3038 Input: apbps2 - fix comment style and typos Input: gpio_keys - fall back to platform_get_irq() for interrupt-only keys Input: novatek-nvt-ts - drop wake_type check dt-bindings: input: touchscreen: tsc2007: document '#io-channel-cells' Input: ili210x - add support for polling mode dt-bindings: touchscreen: trivial-touch: Drop 'interrupts' requirement for old Ilitek Input: appletouch - fix potential race between resume and open HID: i2c-hid: Add FocalTech FT8112 dt-bindings: input: i2c-hid: Introduce FocalTech FT8112 Input: synaptics_i2c - switch to using managed resources Input: synaptics_i2c - guard polling restart in resume Input: gpio_decoder - don't use "proxy" headers Input: gpio_decoder - make use of the macros from bits.h Input: gpio_decoder - replace custom loop by gpiod_get_array_value_cansleep() Input: gpio_decoder - unify messages with help of dev_err_probe() Input: gpio_decoder - make use of device properties Input: serio - complete sizeof(*pointer) conversions Input: wdt87xx_i2c - switch to use dev_err_probe() ... |
||
|
Linus Torvalds
|
13c916af3a |
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"Not much changed in the clk framework this time except the clk.h
consumer API moved the context saving APIs around to fix a build error
in certain configurations.
There was a change to the core framework for CLK_OPS_PARENT_ENABLE
behavior during registration, but it wrecked existing drivers that
didn't expect things to be turned off during clk registration so it
got reverted.
This cycle is really a large collection of new clk drivers, primarily
for Qualcomm SoCs but also for Amlogic, SpacemiT, Google, and Aspeed.
Another big change in here is support for automatic hardware clock
gating on Samsung SoCs where the clks turn on and off when needed.
Ideally more vendors move to this method for better power savings. The
highlights are in the updates section below.
Beyond all the new drivers we have a bunch of cleanups like converting
drivers from divider_round_rate() to divider_determine_rate() and
using scoped for each OF child loops. Otherwise it's the usual data
fixes and plugging reference leaks, etc. that's all pretty ordinary
but not critical enough to fix until the next release.
New Drivers:
- Qualcomm Kaanapali global, tcsr, rpmh, display, gpu, camera, and
video clk controllers
- Qualcomm SM8750 camera clk controllers
- Qualcomm MSM8940 and SDM439 global clk controllers
- Google GS101 Display Process Unit (DPU) clk controllers
- SpacemiT K3 clk controllers
- Amlogic t7 clk controllers
- Aspeed AST2700 clk controllers
Updates:
- Convert clock dividers from round_rate() to determine_rate()
- Fix sparse warnings, kernel-doc warnings, and plug leaked OF refs
- Automatic hardware clk gating on Google GS101 SoCs
- Amlogic s4 video clks
- CAN-FD clks and resets on Renesas RZ/T2H, RZ/N2H, RZ/V2H, and
RZ/V2N
- Expanded Serial Peripheral Interface (xSPI) clocks and resets on
Renesas RZ/T21H and RZ/N2H
- DMAC, interrupt controller (ICU), SPI, and thermal (TSU) clocks and
resets on Renesas RZ/V2N
- More serial (RSCI) clocks and resets on Renesas RZ/V2H and RZ/V2N
- CPU frequency scaling on T-HEAD TH1520"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (165 commits)
clk: aspeed: Add reset for HACE/VIDEO
dt-bindings: clock: aspeed: Add VIDEO reset definition
clk: aspeed: add AST2700 clock driver
MAINTAINERS: Add entry for ASPEED clock drivers.
clk: aspeed: Move the existing ASPEED clk drivers into aspeed subdirectory.
Revert "clk: Respect CLK_OPS_PARENT_ENABLE during recalc"
clk: Disable KUNIT_UML_PCI
dt-bindings: clk: rs9: Fix DIF pattern match
clk: rs9: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
clk: rs9: Reserve 8 struct clk_hw slots for for 9FGV0841
clk: qcom: sm8750: Constify 'qcom_cc_desc' in SM8750 camcc
clk: zynqmp: pll: Fix zynqmp_clk_divider_determine_rate kerneldoc
clk: zynqmp: divider: Fix zynqmp_clk_divider_determine_rate kerneldoc
clk: mediatek: Fix error handling in runtime PM setup
clk: mediatek: don't select clk-mt8192 for all ARM64 builds
clk: mediatek: Add mfg_eb as parent to mt8196 mfgpll clocks
clk: mediatek: Refactor pllfh registration to pass device
clk: mediatek: Pass device to clk_hw_register for PLLs
clk: mediatek: Refactor pll registration to pass device
clk: Respect CLK_OPS_PARENT_ENABLE during recalc
...
|
||
|
Linus Torvalds
|
2bfc50c6e6 |
Merge tag 'rproc-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson: - Fix a memory remapping issue and make a few life-cycle improvements in the i.MX HiFi remoteproc driver - Add support the System Manager CPU and LMM APIs and use this to support i.MX95 - Rework the handling of the Mediatek SCP clock to avoid a potential circular deadlock in the clock providers - Refactor the Qualcomm secure-world helpers and add support in the Qualcomm PAS remoteproc driver for reading a resource-table from secure world. Use this to configure the IOMMU on newer targets where Linux runs in EL2 * tag 'rproc-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: remoteproc: imx_rproc: Fix invalid loaded resource table detection remoteproc: mediatek: Break lock dependency to `prepare_lock` remoteproc: imx_rproc: Add support for i.MX95 remoteproc: imx_rproc: Add support for System Manager CPU API remoteproc: imx_rproc: Add support for System Manager LMM API remoteproc: imx_rproc: Introduce prepare ops for imx_rproc_dcfg remoteproc: imx_rproc: Add runtime ops copy to support dynamic behavior dt-bindings: remoteproc: fsl,imx-rproc: Add support for i.MX95 dt-bindings: remoteproc: Add HSM M4F core on TI K3 SoCs remoteproc: xlnx_r5: Simplify with scoped for each OF child loop remoteproc: mtk_scp: Simplify with scoped for each OF child loop remoteproc: imx_dsp_rproc: Only reset carveout memory at RPROC_OFFLINE state dt-bindings: remoteproc: qcom,sm8550-pas: Drop SM8750 ADSP from if-branch dt-bindings: remoteproc: qcom,adsp: Allow cx-supply on qcom,sdm845-slpi-pas remoteproc: imx_dsp_rproc: Fix multiple start/stop operations remoteproc: imx_rproc: Use strstarts for "rsc-table" check remoteproc: imx_dsp_rproc: Wait for suspend ACK only if WAIT_FW_CONFIRMATION is set remoteproc: imx_dsp_rproc: Rename macro to reflect multiple contexts remoteproc: imx_dsp_rproc: Skip RP_MBOX_SUSPEND_SYSTEM when mailbox TX channel is uninitialized dt-bindings: remoteproc: Fix dead link to Keystone DSP GPIO binding |
||
|
Linus Torvalds
|
f0a475aedd |
Merge tag 'mailbox-v6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox
Pull mailbox updates from Jassi Brar:
"Platform and core updates
PCC:
- Updates to transmission and interrupt handling, including dynamic
txdone configuration, ->last_tx_done() wiring, and SHMEM
initialization fixes. Reverted previous shared buffer patch
MediaTek
- Introduce mtk-vcp-mailbox driver and bindings for MT8196 VCP
- Expand mtk-cmdq for MT8196 with GCE virtualization, mminfra_offset,
and instruction generation data
Spreadtrum (SPRD)
- Add Mailbox Revision 2 support and UMS9230 bindings
- Fix unhandled interrupt masking and TX done delivery flags
Microchip
- Add pic64gx compatibility to MPFS
- Fix out-of-bounds access and smatch warnings in mchp-ipc-sbi
Core & Misc Platform Updates
- Prevent out-of-bounds access in fw_mbox_index_xlate()
- Add bindings for Qualcomm CPUCP (Kaanapali)
- Simplify mtk-cmdq and zynqmp-ipi with scoped OF child iterators
- Consolidate various minor fixes, dead code removal, and typo
corrections across Broadcom, NXP, Samsung, Xilinx, ARM, and core
headers"
* tag 'mailbox-v6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox: (34 commits)
mailbox: sprd: mask interrupts that are not handled
mailbox: sprd: add support for mailbox revision 2
mailbox: sprd: clear delivery flag before handling TX done
dt-bindings: mailbox: sprd: add compatible for UMS9230
mailbox: bcm-ferxrm-mailbox: Use default primary handler
mailbox: Remove mailbox_client.h from controller drivers
mailbox: zynqmp-ipi: Simplify with scoped for each OF child loop
mailbox: mtk-cmdq: Simplify with scoped for each OF child loop
dt-bindings: mailbox: xlnx,zynqmp-ipi-mailbox: Document msg region requirement
mailbox: Improve RISCV_SBI_MPXY_MBOX guidance
mailbox: mchp-ipc-sbi: fix uninitialized symbol and other smatch warnings
mailbox: arm_mhuv3: fix typo in comment
mailbox: cix: fix typo in error message
mailbox: imx: Skip the suspend flag for i.MX7ULP
mailbox: exynos: drop unneeded runtime pointer (pclk)
mailbox: pcc: Remove spurious IRQF_ONESHOT usage
mailbox: mtk-cmdq: Add driver data to support for MT8196
mailbox: mtk-cmdq: Add mminfra_offset configuration for DRAM transaction
mailbox: mtk-cmdq: Add GCE hardware virtualization configuration
mailbox: mtk-cmdq: Add cmdq private data to cmdq_pkt for generating instruction
...
|
||
|
Stephen Boyd
|
5921ae27ea |
Merge branches 'clk-aspeed' and 'clk-qcom' into clk-next
* clk-aspeed: clk: aspeed: Add reset for HACE/VIDEO dt-bindings: clock: aspeed: Add VIDEO reset definition clk: aspeed: add AST2700 clock driver MAINTAINERS: Add entry for ASPEED clock drivers. clk: aspeed: Move the existing ASPEED clk drivers into aspeed subdirectory. * clk-qcom: (49 commits) clk: qcom: sm8750: Constify 'qcom_cc_desc' in SM8750 camcc clk: qcom: gfx3d: add parent to parent request map clk: qcom: dispcc-sm7150: Fix dispcc_mdss_pclk1_clk_src clk: qcom: dispcc-sdm845: Enable parents for pixel clocks clk: qcom: regmap-divider: convert from divider_round_rate() to divider_determine_rate() clk: qcom: regmap-divider: convert from divider_ro_round_rate() to divider_ro_determine_rate() clk: qcom: alpha-pll: convert from divider_round_rate() to divider_determine_rate() clk: qcom: Add support for GPUCC and GXCLK for Kaanapali clk: qcom: Add support for VideoCC driver for Kaanapali clk: qcom: camcc: Add support for camera clock controller for Kaanapali clk: qcom: dispcc: Add support for display clock controller Kaanapali clk: qcom: clk-alpha-pll: Add support for controlling Pongo EKO_T PLL clk: qcom: clk-alpha-pll: Update the PLL support for cal_l clk: qcom: camcc: Add camera clock controller driver for SM8750 SoC clk: qcom: clk-alpha-pll: Add support for controlling Rivian PLL dt-bindings: clock: qcom: document the Kaanapali GPU Clock Controller dt-bindings: clock: qcom: Add Kaanapali video clock controller dt-bindings: clock: qcom: Add support for CAMCC for Kaanapali dt-bindings: clock: qcom: document Kaanapali DISPCC clock controller dt-bindings: clock: qcom: Add camera clock controller for SM8750 SoC ... |
||
|
Stephen Boyd
|
a612d3d6d7 |
Merge branches 'clk-imx', 'clk-divider', 'clk-rockchip' and 'clk-microchip' into clk-next
* clk-imx: clk: imx: fracn-gppll: Add 241.90 MHz Support clk: imx: fracn-gppll: Add 332.60 MHz Support * clk-divider: rtc: ac100: convert from divider_round_rate() to divider_determine_rate() clk: zynqmp: divider: convert from divider_round_rate() to divider_determine_rate() clk: x86: cgu: convert from divider_round_rate() to divider_determine_rate() clk: versaclock3: convert from divider_round_rate() to divider_determine_rate() clk: stm32: stm32-core: convert from divider_round_rate_parent() to divider_determine_rate() clk: stm32: stm32-core: convert from divider_ro_round_rate() to divider_ro_determine_rate() clk: sprd: div: convert from divider_round_rate() to divider_determine_rate() clk: sophgo: sg2042-clkgen: convert from divider_round_rate() to divider_determine_rate() clk: nxp: lpc32xx: convert from divider_round_rate() to divider_determine_rate() clk: nuvoton: ma35d1-divider: convert from divider_round_rate() to divider_determine_rate() clk: milbeaut: convert from divider_round_rate() to divider_determine_rate() clk: milbeaut: convert from divider_ro_round_rate() to divider_ro_determine_rate() clk: loongson1: convert from divider_round_rate() to divider_determine_rate() clk: hisilicon: clkdivider-hi6220: convert from divider_round_rate() to divider_determine_rate() clk: bm1880: convert from divider_round_rate() to divider_determine_rate() clk: bm1880: convert from divider_ro_round_rate() to divider_ro_determine_rate() clk: actions: owl-divider: convert from divider_round_rate() to divider_determine_rate() clk: actions: owl-composite: convert from owl_divider_helper_round_rate() to divider_determine_rate() clk: sunxi-ng: convert from divider_round_rate_parent() to divider_determine_rate() clk: sophgo: cv18xx-ip: convert from divider_round_rate() to divider_determine_rate() * clk-rockchip: clk: rockchip: Fix error pointer check after rockchip_clk_register_gate_link() * clk-microchip: dt-bindings: clock: mpfs-clkcfg: Add pic64gx compatibility dt-bindings: clock: mpfs-ccc: Add pic64gx compatibility clk: microchip: drop POLARFIRE from ARCH_MICROCHIP_POLARFIRE clk: microchip: core: remove unused include asm/traps.h clk: microchip: core: correct return value on *_get_parent() clk: microchip: core: remove duplicate determine_rate on pic32_sclk_ops |
||
|
Stephen Boyd
|
b675697d80 |
Merge branches 'clk-amlogic', 'clk-thead', 'clk-mediatek' and 'clk-samsung' into clk-next
* clk-amlogic: clk: meson: gxbb: use the existing HHI_HDMI_PLL_CNTL3 macro clk: meson: g12a: Limit the HDMI PLL OD to /4 clk: meson: gxbb: Limit the HDMI PLL OD to /4 on GXL/GXM SoCs clk: amlogic: remove potentially unsafe flags from S4 video clocks clk: amlogic: add video-related clocks for S4 SoC dt-bindings: clock: add video clock indices for Amlogic S4 SoC clk: meson: t7: add t7 clock peripherals controller driver clk: meson: t7: add support for the T7 SoC PLL clock dt-bindings: clock: add Amlogic T7 peripherals clock controller dt-bindings: clock: add Amlogic T7 SCMI clock controller dt-bindings: clock: add Amlogic T7 PLL clock controller * clk-thead: clk: thead: th1520-ap: Support CPU frequency scaling clk: thead: th1520-ap: Add macro to define multiplexers with flags clk: thead: th1520-ap: Support setting PLL rates clk: thead: th1520-ap: Add C910 bus clock clk: thead: th1520-ap: Poll for PLL lock and wait for stability dt-bindings: clock: thead,th1520-clk-ap: Add ID for C910 bus clock * clk-mediatek: Revert "clk: Respect CLK_OPS_PARENT_ENABLE during recalc" clk: mediatek: Fix error handling in runtime PM setup clk: mediatek: don't select clk-mt8192 for all ARM64 builds clk: mediatek: Add mfg_eb as parent to mt8196 mfgpll clocks clk: mediatek: Refactor pllfh registration to pass device clk: mediatek: Pass device to clk_hw_register for PLLs clk: mediatek: Refactor pll registration to pass device clk: Respect CLK_OPS_PARENT_ENABLE during recalc dt-bindings: clock: mediatek,mt7622-pciesys: Remove syscon compatible clk: mediatek: Drop __initconst from gates * clk-samsung: clk: samsung: gs101: add support for Display Process Unit (DPU) clocks dt-bindings: samsung: exynos-sysreg: add gs101 dpu compatible dt-bindings: clock: google,gs101-clock: Add DPU clock management unit dt-bindings: clock: google,gs101-clock: fix alphanumeric ordering clk: samsung: fix sysreg save/restore when PM is enabled for CMU clk: samsung: avoid warning message on legacy Exynos (auto clock gating) clk: samsung: gs101: Enable auto_clock_gate mode for each gs101 CMU clk: samsung: Implement automatic clock gating mode for CMUs dt-bindings: clock: google,gs101-clock: add samsung,sysreg property as required clk: samsung: exynosautov920: add clock support dt-bindings: clock: exynosautov920: add MFD clock definitions |
||
|
Stephen Boyd
|
16c3c4e288 |
Merge branches 'clk-renesas', 'clk-cleanup', 'clk-spacemit' and 'clk-tegra' into clk-next
* clk-renesas: (25 commits)
dt-bindings: clk: rs9: Fix DIF pattern match
clk: rs9: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
clk: rs9: Reserve 8 struct clk_hw slots for for 9FGV0841
clk: renesas: Add missing log message terminators
clk: renesas: rzg2l: Remove DSI clock rate restrictions
clk: renesas: rzv2h: Deassert reset on assert timeout
clk: renesas: rzg2l: Deassert reset on assert timeout
clk: renesas: cpg-mssr: Unlock before reset verification
clk: renesas: r9a09g056: Add entries for CANFD
clk: renesas: r9a09g057: Add entries for CANFD
clk: renesas: r9a09g077: Add CANFD clocks
clk: renesas: cpg-mssr: Handle RZ/T2H register layout in PM callbacks
dt-bindings: clock: renesas,r9a09g077/87: Add PCLKCAN ID
clk: renesas: cpg-mssr: Simplify pointer math in cpg_rzt2h_mstp_read()
clk: renesas: r9a09g056: Add clock and reset entries for TSU
clk: renesas: r9a09g057: Add entries for RSCIs
clk: renesas: r9a09g056: Add entries for RSCIs
clk: renesas: r9a09g056: Add entries for the RSPIs
clk: renesas: r9a09g056: Add entries for ICU
clk: renesas: r9a09g056: Add entries for the DMACs
...
* clk-cleanup:
clk: Disable KUNIT_UML_PCI
clk: zynqmp: pll: Fix zynqmp_clk_divider_determine_rate kerneldoc
clk: zynqmp: divider: Fix zynqmp_clk_divider_determine_rate kerneldoc
clk: tegra: tegra124-emc: fix device leak on set_rate()
clk: Annotate #else and #endif
clk: Merge prepare and unprepare sections
clk: Move clk_{save,restore}_context() to COMMON_CLK section
clk: clk-apple-nco: Add "apple,t8103-nco" compatible
clk: versatile: impd1: Simplify with scoped for each OF child loop
clk: scpi: Simplify with scoped for each OF child loop
clk: lmk04832: Simplify with scoped for each OF child loop
* clk-spacemit:
clk: spacemit: k3: add the clock tree
clk: spacemit: k3: extract common header
clk: spacemit: ccu_pll: add plla type clock
clk: spacemit: ccu_mix: add inverted enable gate clock
dt-bindings: soc: spacemit: k3: add clock support
clk: spacemit: add platform SoC prefix to reset name
clk: spacemit: extract common ccu functions
reset: spacemit: fix auxiliary device id
clk: spacemit: prepare common ccu header
clk: spacemit: Hide common clock driver from user controller
clk: spacemit: Respect Kconfig setting when building modules
* clk-tegra:
clk: tegra30: Add CSI pad clock gates
clk: tegra: Set CSUS as vi_sensor's gate for Tegra20, Tegra30 and Tegra114
clk: tegra20: Reparent dsi clock to pll_d_out0
clk: tegra: tegra124-emc: Simplify with scoped for each OF child loop
clk: tegra: Adjust callbacks in tegra_clock_pm
clk: tegra: tegra124-emc: Fix potential memory leak in tegra124_clk_register_emc()
|
||
|
Linus Torvalds
|
1b49e36325 |
Merge tag 'mtd/for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD updates from Miquel Raynal:
"MTD:
- prioritize ofpart in physmap-core probing
- conversions to scoped for each OF child loops
Bindings:
- The bulk of the changes consists of binding fixes/updates to
restrict the use of undefined properties, which was mostly
ineffective in the current form because of the nesting of partition
nodes and the lack of compatible strings
- YAML conversions and the addition of a dma-coherent property in the
cdns,hp-nfc driver
SPI NAND:
- support for octal DTR modes (8D-8D-8D)
- support for Foresee F35SQB002G chips
And small misc fixes"
* tag 'mtd/for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (65 commits)
mtd: spi-nor: hisi-sfc: fix refcounting bug in hisi_spi_nor_register_all()
mtd: spinand: fix NULL pointer dereference in spinand_support_vendor_ops()
mtd: rawnand: pl353: Add message about ECC mode
mtd: rawnand: pl353: Fix software ECC support
mtd: spinand: winbond: Remove unneeded semicolon
dt-bindings: mtd: cdns,hp-nfc: Add dma-coherent property
mtd: spinand: Disable continuous read during probe
mtd: spinand: add Foresee F35SQB002G flash support
mtd: spinand: winbond: W35N octal DTR support
mtd: spinand: Add octal DTR support
mtd: spinand: Warn if using SSDR-only vendor commands in a non SSDR mode
mtd: spinand: Give the bus interface to the configuration helper
mtd: spinand: Propagate the bus interface across core helpers
mtd: spinand: Add support for setting a bus interface
mtd: spinand: Gather all the bus interface steps in one single function
mtd: spinand: winbond: Configure the IO mode after the dummy cycles
mtd: spinand: winbond: Rename IO_MODE register macro
mtd: spinand: winbond: Fix style
mtd: spinand: winbond: Register W35N vendor specific operation
mtd: spinand: winbond: Register W25N vendor specific operation
...
|
||
|
Miquel Raynal
|
7e96d76c74 |
Merge tag 'nand/for-7.0' into mtd/next
SPI NAND - The major feature this release is the support for octal DTR modes (8D-8D-8D). - There has been as well a series of conversion to scoped for each OF child loops. - Support for Foresee F35SQB002G chips has been added. Other changes are small fixes. |
||
|
Linus Torvalds
|
cee73b1e84 |
Merge tag 'riscv-for-linus-7.0-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Paul Walmsley: - Add support for control flow integrity for userspace processes. This is based on the standard RISC-V ISA extensions Zicfiss and Zicfilp - Improve ptrace behavior regarding vector registers, and add some selftests - Optimize our strlen() assembly - Enable the ISO-8859-1 code page as built-in, similar to ARM64, for EFI volume mounting - Clean up some code slightly, including defining copy_user_page() as copy_page() rather than memcpy(), aligning us with other architectures; and using max3() to slightly simplify an expression in riscv_iommu_init_check() * tag 'riscv-for-linus-7.0-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (42 commits) riscv: lib: optimize strlen loop efficiency selftests: riscv: vstate_exec_nolibc: Use the regular prctl() function selftests: riscv: verify ptrace accepts valid vector csr values selftests: riscv: verify ptrace rejects invalid vector csr inputs selftests: riscv: verify syscalls discard vector context selftests: riscv: verify initial vector state with ptrace selftests: riscv: test ptrace vector interface riscv: ptrace: validate input vector csr registers riscv: csr: define vtype register elements riscv: vector: init vector context with proper vlenb riscv: ptrace: return ENODATA for inactive vector extension kselftest/riscv: add kselftest for user mode CFI riscv: add documentation for shadow stack riscv: add documentation for landing pad / indirect branch tracking riscv: create a Kconfig fragment for shadow stack and landing pad support arch/riscv: add dual vdso creation logic and select vdso based on hw arch/riscv: compile vdso with landing pad and shadow stack note riscv: enable kernel access to shadow stack memory via the FWFT SBI call riscv: add kernel command line option to opt out of user CFI riscv/hwprobe: add zicfilp / zicfiss enumeration in hwprobe ... |
||
|
Linus Torvalds
|
7563f7e0e9 |
Merge tag 'for-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"power-supply core:
- sysfs: constify pointer passed to dev_attr_psp
- extend DT binding documentation for battery cells to allow
describing voltage drop behaviour
power-supply drivers:
- multiple: Remove unused gpio include header
- multiple: Fix potential IRQ use-after-free on driver unload
- bd71828: Add support for ROHM BD72720
- misc small fixes
reset drivers:
- tdx-ec-poweroff: fix restart"
* tag 'for-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (30 commits)
power: supply: bd71828: Use dev_err_probe()
dt-bindings: power: supply: google,goldfish-battery: Convert to DT schema
power: supply: qcom_battmgr: Recognize "LiP" as lithium-polymer
power: supply: wm97xx: Use devm_power_supply_register()
power: supply: wm97xx: Use devm_kcalloc()
power: supply: pm8916_lbc: Fix use-after-free for extcon in IRQ handler
power: reset: tdx-ec-poweroff: fix restart
docs: power: update documentation about removed function
power: supply: wm97xx: Fix NULL pointer dereference in power_supply_changed()
MAINTAINERS: adjust file entry in ROHM BD71828 CHARGER
power: supply: ab8500_chargalg: improve kernel-doc
power: supply: sysfs: Constify pointer passed to dev_attr_psp()
power: supply: bq27xxx: fix wrong errno when bus ops are unsupported
power: reset: nvmem-reboot-mode: respect cell size for nvmem_cell_write
power: supply: sbs-battery: Fix use-after-free in power_supply_changed()
power: supply: rt9455: Fix use-after-free in power_supply_changed()
power: supply: pm8916_lbc: Fix use-after-free in power_supply_changed()
power: supply: pm8916_bms_vm: Fix use-after-free in power_supply_changed()
power: supply: pf1550: Fix use-after-free in power_supply_changed()
power: supply: goldfish: Fix use-after-free in power_supply_changed()
...
|
||
|
Linus Torvalds
|
2c75a8d92c |
Merge tag 'ata-6.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ATA updates from Damien Le Moal: - Cleanup IRQ masking in the handling of completed report zones commands (Niklas) - Improve the handling of Thunderbolt attached devices to speed up device removal (Henry) - Several patches to generalize the existing max_sec quirks to facilitates quirking the maximum command size of buggy drives, many of which have recently showed up with the recent increase of the default max_sectors block limit (Niklas) - Cleanup the ahci-platform and sata dt-bindings schema (Rob, Manivannan) - Improve device node scan in the ahci-dwc driver (Krzysztof) - Remove clang W=1 warnings with the ahci-imx and ahci-xgene drivers (Krzysztof) - Fix a long standing potential command starvation situation with non-NCQ commands issued when NCQ commands are on-going (me) - Limit max_sectors to 8191 on the INTEL SSDSC2KG480G8 SSD (Niklas) - Remove Vesa Local Bus (VLB) support in the pata_legacy driver (Ethan) - Simple fixes in the pata_cypress (typo) and pata_ftide010 (timing) drivers (Ethan, Linus W) * tag 'ata-6.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux: ata: pata_ftide010: Fix some DMA timings ata: pata_cypress: fix typo in error message ata: pata_legacy: remove VLB support ata: libata-core: Quirk INTEL SSDSC2KG480G8 max_sectors dt-bindings: ata: sata: Document the graph port ata: libata-scsi: avoid Non-NCQ command starvation ata: libata-scsi: refactor ata_scsi_translate() ata: ahci-xgene: Fix Wvoid-pointer-to-enum-cast warning ata: ahci-imx: Fix Wvoid-pointer-to-enum-cast warning ata: ahci-dwc: Simplify with scoped for each OF child loop dt-bindings: ata: ahci-platform: Drop unnecessary select schema ata: libata: Allow more quirks ata: libata: Add libata.force parameter max_sec ata: libata: Add support to parse equal sign in libata.force ata: libata: Change libata.force to use the generic ATA_QUIRK_MAX_SEC quirk ata: libata: Add ata_force_get_fe_for_dev() helper ata: libata: Add ATA_QUIRK_MAX_SEC and convert all device quirks ata: libata: avoid long timeouts on hot-unplugged SATA DAS ata: libata-scsi: Remove superfluous local_irq_save() |
||
|
Linus Torvalds
|
d4a379a52c |
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley: "Usual driver updates (qla2xxx, mpi3mr, mpt3sas, ufs) plus assorted cleanups and fixes. The biggest core change is the massive code motion in the sd driver to remove forward declarations and the most significant change is to enumify the queuecommand return" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (78 commits) scsi: csiostor: Fix dereference of null pointer rn scsi: buslogic: Reduce stack usage scsi: ufs: host: mediatek: Require CONFIG_PM scsi: ufs: mediatek: Fix page faults in ufs_mtk_clk_scale() trace event scsi: smartpqi: Fix memory leak in pqi_report_phys_luns() scsi: mpi3mr: Make driver probing asynchronous scsi: ufs: core: Flush exception handling work when RPM level is zero scsi: efct: Use IRQF_ONESHOT and default primary handler scsi: ufs: core: Use a host-wide tagset in SDB mode scsi: qla2xxx: target: Add WQ_PERCPU to alloc_workqueue() users scsi: qla2xxx: Add WQ_PERCPU to alloc_workqueue() users scsi: qla4xxx: Add WQ_PERCPU to alloc_workqueue() users scsi: mpi3mr: Driver version update to 8.17.0.3.50 scsi: mpi3mr: Fixed the W=1 compilation warning scsi: mpi3mr: Record and report controller firmware faults scsi: mpi3mr: Update MPI Headers to revision 39 scsi: mpi3mr: Use negotiated link rate from DevicePage0 scsi: mpi3mr: Avoid redundant diag-fault resets scsi: mpi3mr: Rename log data save helper to reflect threaded/BH context scsi: mpi3mr: Add module parameter to control threaded IRQ polling ... |
||
|
Shengjiu Wang
|
42a9a5c256 |
ASoC: dt-bindings: asahi-kasei,ak5558: Reference common DAI properties
Reference the dai-common.yaml schema to allow '#sound-dai-cells' and "sound-name-prefix' to be used because asahi-kasei,ak5558 is codec DAI. Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Link: https://patch.msgid.link/20260211101009.2895296-1-shengjiu.wang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org> |
||
|
Linus Torvalds
|
37a93dd5c4 |
Merge tag 'net-next-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core & protocols:
- A significant effort all around the stack to guide the compiler to
make the right choice when inlining code, to avoid unneeded calls
for small helper and stack canary overhead in the fast-path.
This generates better and faster code with very small or no text
size increases, as in many cases the call generated more code than
the actual inlined helper.
- Extend AccECN implementation so that is now functionally complete,
also allow the user-space enabling it on a per network namespace
basis.
- Add support for memory providers with large (above 4K) rx buffer.
Paired with hw-gro, larger rx buffer sizes reduce the number of
buffers traversing the stack, dincreasing single stream CPU usage
by up to ~30%.
- Do not add HBH header to Big TCP GSO packets. This simplifies the
RX path, the TX path and the NIC drivers, and is possible because
user-space taps can now interpret correctly such packets without
the HBH hint.
- Allow IPv6 routes to be configured with a gateway address that is
resolved out of a different interface than the one specified,
aligning IPv6 to IPv4 behavior.
- Multi-queue aware sch_cake. This makes it possible to scale the
rate shaper of sch_cake across multiple CPUs, while still enforcing
a single global rate on the interface.
- Add support for the nbcon (new buffer console) infrastructure to
netconsole, enabling lock-free, priority-based console operations
that are safer in crash scenarios.
- Improve the TCP ipv6 output path to cache the flow information,
saving cpu cycles, reducing cache line misses and stack use.
- Improve netfilter packet tracker to resolve clashes for most
protocols, avoiding unneeded drops on rare occasions.
- Add IP6IP6 tunneling acceleration to the flowtable infrastructure.
- Reduce tcp socket size by one cache line.
- Notify neighbour changes atomically, avoiding inconsistencies
between the notification sequence and the actual states sequence.
- Add vsock namespace support, allowing complete isolation of vsocks
across different network namespaces.
- Improve xsk generic performances with cache-alignment-oriented
optimizations.
- Support netconsole automatic target recovery, allowing netconsole
to reestablish targets when underlying low-level interface comes
back online.
Driver API:
- Support for switching the working mode (automatic vs manual) of a
DPLL device via netlink.
- Introduce PHY ports representation to expose multiple front-facing
media ports over a single MAC.
- Introduce "rx-polarity" and "tx-polarity" device tree properties,
to generalize polarity inversion requirements for differential
signaling.
- Add helper to create, prepare and enable managed clocks.
Device drivers:
- Add Huawei hinic3 PF etherner driver.
- Add DWMAC glue driver for Motorcomm YT6801 PCIe ethernet
controller.
- Add ethernet driver for MaxLinear MxL862xx switches
- Remove parallel-port Ethernet driver.
- Convert existing driver timestamp configuration reporting to
hwtstamp_get and remove legacy ioctl().
- Convert existing drivers to .get_rx_ring_count(), simplifing the RX
ring count retrieval. Also remove the legacy fallback path.
- Ethernet high-speed NICs:
- Broadcom (bnxt, bng):
- bnxt: add FW interface update to support FEC stats histogram
and NVRAM defragmentation
- bng: add TSO and H/W GRO support
- nVidia/Mellanox (mlx5):
- improve latency of channel restart operations, reducing the
used H/W resources
- add TSO support for UDP over GRE over VLAN
- add flow counters support for hardware steering (HWS) rules
- use a static memory area to store headers for H/W GRO,
leading to 12% RX tput improvement
- Intel (100G, ice, idpf):
- ice: reorganizes layout of Tx and Rx rings for cacheline
locality and utilizes __cacheline_group* macros on the new
layouts
- ice: introduces Synchronous Ethernet (SyncE) support
- Meta (fbnic):
- adds debugfs for firmware mailbox and tx/rx rings vectors
- Ethernet virtual:
- geneve: introduce GRO/GSO support for double UDP encapsulation
- Ethernet NICs consumer, and embedded:
- Synopsys (stmmac):
- some code refactoring and cleanups
- RealTek (r8169):
- add support for RTL8127ATF (10G Fiber SFP)
- add dash and LTR support
- Airoha:
- AN8811HB 2.5 Gbps phy support
- Freescale (fec):
- add XDP zero-copy support
- Thunderbolt:
- add get link setting support to allow bonding
- Renesas:
- add support for RZ/G3L GBETH SoC
- Ethernet switches:
- Maxlinear:
- support R(G)MII slow rate configuration
- add support for Intel GSW150
- Motorcomm (yt921x):
- add DCB/QoS support
- TI:
- icssm-prueth: support bridging (STP/RSTP) via the switchdev
framework
- Ethernet PHYs:
- Realtek:
- enable SGMII and 2500Base-X in-band auto-negotiation
- simplify and reunify C22/C45 drivers
- Micrel: convert bindings to DT schema
- CAN:
- move skb headroom content into skb extensions, making CAN
metadata access more robust
- CAN drivers:
- rcar_canfd:
- add support for FD-only mode
- add support for the RZ/T2H SoC
- sja1000: cleanup the CAN state handling
- WiFi:
- implement EPPKE/802.1X over auth frames support
- split up drop reasons better, removing generic RX_DROP
- additional FTM capabilities: 6 GHz support, supported number of
spatial streams and supported number of LTF repetitions
- better mac80211 iterators to enumerate resources
- initial UHR (Wi-Fi 8) support for cfg80211/mac80211
- WiFi drivers:
- Qualcomm/Atheros:
- ath11k: support for Channel Frequency Response measurement
- ath12k: a significant driver refactor to support multi-wiphy
devices and and pave the way for future device support in the
same driver (rather than splitting to ath13k)
- ath12k: support for the QCC2072 chipset
- Intel:
- iwlwifi: partial Neighbor Awareness Networking (NAN) support
- iwlwifi: initial support for U-NII-9 and IEEE 802.11bn
- RealTek (rtw89):
- preparations for RTL8922DE support
- Bluetooth:
- implement setsockopt(BT_PHY) to set the connection packet type/PHY
- set link_policy on incoming ACL connections
- Bluetooth drivers:
- btusb: add support for MediaTek7920, Realtek RTL8761BU and 8851BE
- btqca: add WCN6855 firmware priority selection feature"
* tag 'net-next-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1254 commits)
bnge/bng_re: Add a new HSI
net: macb: Fix tx/rx malfunction after phy link down and up
af_unix: Fix memleak of newsk in unix_stream_connect().
net: ti: icssg-prueth: Add optional dependency on HSR
net: dsa: add basic initial driver for MxL862xx switches
net: mdio: add unlocked mdiodev C45 bus accessors
net: dsa: add tag format for MxL862xx switches
dt-bindings: net: dsa: add MaxLinear MxL862xx
selftests: drivers: net: hw: Modify toeplitz.c to poll for packets
octeontx2-pf: Unregister devlink on probe failure
net: renesas: rswitch: fix forwarding offload statemachine
ionic: Rate limit unknown xcvr type messages
tcp: inet6_csk_xmit() optimization
tcp: populate inet->cork.fl.u.ip6 in tcp_v6_syn_recv_sock()
tcp: populate inet->cork.fl.u.ip6 in tcp_v6_connect()
ipv6: inet6_csk_xmit() and inet6_csk_update_pmtu() use inet->cork.fl.u.ip6
ipv6: use inet->cork.fl.u.ip6 and np->final in ip6_datagram_dst_update()
ipv6: use np->final in inet6_sk_rebuild_header()
ipv6: add daddr/final storage in struct ipv6_pinfo
net: stmmac: qcom-ethqos: fix qcom_ethqos_serdes_powerup()
...
|
||
|
Linus Torvalds
|
098b6e44cb |
Merge tag 'devicetree-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT core:
- Sync dtc/libfdt with upstream v1.7.2-62-ga26ef6400bd8
- Add a for_each_compatible_node_scoped() loop and convert users in
cpufreq, dmaengine, clk, cdx, powerpc and Arm
- Simplify of/platform.c with scoped loop helpers
- Add fw_devlink tracking for "mmc-pwrseq"
- Optimize fw_devlink callback code size for pinctrl-N properties
- Replace strcmp_suffix() with strends()
DT bindings:
- Support building single binding targets
- Convert google,goldfish-fb, cznic,turris-mox-rwtm, ti,prm-inst
- Add bindings for Freescale AVIC, Realtek RTD1xxx system
controllers, Microchip 25AA010A EEPROM, OnSemi FIN3385, IEI
WT61P803 PUZZLE, Delta Electronics DPS-800-AB power supply,
Infineon IR35221 Digital Multi-phase Controller, Infineon PXE1610
Digital Dual Output 6+1 VR12.5 & VR13 CPU Controller,
socionext,uniphier-smpctrl, and xlnx,zynqmp-firmware
- Lots of trivial binding fixes to address warnings in DTS files.
These are mostly for arm64 platforms which is getting closer to be
warning free. Some public shaming has helped.
- Fix I2C bus node names in examples
- Drop obsolete brcm,vulcan-soc binding
- Drop unreferenced binding headers"
* tag 'devicetree-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (60 commits)
dt-bindings: interrupt-controller: Add compatiblie string fsl,imx(1|25|27|31|35)-avic
dt-bindings: soc: imx: add fsl,aips and fsl,emi compatible strings
dt-bindings: display: bridge: lt8912b: Drop reset gpio requirement
dt-bindings: firmware: fsl,scu: Mark multi-channel MU layouts as deprecated
cpufreq: s5pv210: Simplify with scoped for each OF child loop
dmaengine: fsl_raid: Simplify with scoped for each OF child loop
clk: imx: imx31: Simplify with scoped for each OF child loop
clk: imx: imx27: Simplify with scoped for each OF child loop
cdx: Use mutex guard to simplify error handling
cdx: Simplify with scoped for each OF child loop
powerpc/wii: Simplify with scoped for each OF child loop
powerpc/fsp2: Simplify with scoped for each OF child loop
ARM: exynos: Simplify with scoped for each OF child loop
ARM: at91: Simplify with scoped for each OF child loop
of: Add for_each_compatible_node_scoped() helper
dt-bindings: Fix emails with spaces or missing brackets
scripts/dtc: Update to upstream version v1.7.2-62-ga26ef6400bd8
dt-bindings: crypto: inside-secure,safexcel: Mandate only ring IRQs
dt-bindings: crypto: inside-secure,safexcel: Add SoC compatibles
of: reserved_mem: Fix placement of __free() annotation
...
|
||
|
Linus Torvalds
|
1c2b4a4c2b |
Merge tag 'pci-v7.0-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Don't try to enable Extended Tags on VFs since that bit is Reserved
and causes misleading log messages (Håkon Bugge)
- Initialize Endpoint Read Completion Boundary to match Root Port,
regardless of ACPI _HPX (Håkon Bugge)
- Apply _HPX PCIe Setting Record only to AER configuration, and only
when OS owns PCIe hotplug but not AER, to avoid clobbering Extended
Tag and Relaxed Ordering settings (Håkon Bugge)
Resource management:
- Move CardBus code to setup-cardbus.c and only build it when
CONFIG_CARDBUS is set (Ilpo Järvinen)
- Fix bridge window alignment with optional resources, where
additional alignment requirement was previously lost (Ilpo
Järvinen)
- Stop over-estimating bridge window size since they are now assigned
without any gaps between them (Ilpo Järvinen)
- Increase resource MAX_IORES_LEVEL to avoid /proc/iomem flattening
for nested bridges and endpoints (Ilpo Järvinen)
- Add pbus_mem_size_optional() to handle sizes of optional resources
(SR-IOV VF BARs, expansion ROMs, bridge windows) (Ilpo Järvinen)
- Don't claim disabled bridge windows to avoid spurious claim
failures (Ilpo Järvinen)
Driver binding:
- Fix device reference leak in pcie_port_remove_service() (Uwe
Kleine-König)
- Move pcie_port_bus_match() and pcie_port_bus_type to PCIe-specific
portdrv.c (Uwe Kleine-König)
- Convert portdrv to use pcie_port_bus_type.probe() and .remove()
callbacks so .probe() and .remove() can eventually be removed from
struct device_driver (Uwe Kleine-König)
Error handling:
- Clear stale errors on reporting agents upon probe so they don't
look like recent errors (Lukas Wunner)
- Add generic RAS tracepoint for hotplug events (Shuai Xue)
- Add RAS tracepoint for link speed changes (Shuai Xue)
Power management:
- Avoid redundant delay on transition from D3hot to D3cold if the
device was already in D3hot (Brian Norris)
- Prevent runtime suspend until devices are fully initialized to
avoid saving incompletely configured device state (Brian Norris)
Power control:
- Add power_on/off callbacks with generic signature to pwrseq,
tc9563, and slot drivers so they can be used by pwrctrl core
(Manivannan Sadhasivam)
- Add PCIe M.2 connector support to the slot pwrctrl driver
(Manivannan Sadhasivam)
- Switch to pwrctrl interfaces to create, destroy, and power on/off
devices, calling them from host controller drivers instead of the
PCI core (Manivannan Sadhasivam)
- Drop qcom .assert_perst() callbacks since this is now done by the
controller driver instead of the pwrctrl driver (Manivannan
Sadhasivam)
Virtualization:
- Remove an incorrect unlock in pci_slot_trylock() error handling
(Jinhui Guo)
- Lock the bridge device for slot reset (Keith Busch)
- Enable ACS after IOMMU configuration on OF platforms so ACS is
enabled an all devices; previously the first device enumerated
(typically a Root Port) didn't have ACS enabled (Manivannan
Sadhasivam)
- Disable ACS Source Validation for IDT 0x80b5 and 0x8090 switches to
work around hardware erratum; previously ACS SV was only
temporarily disabled, which worked for enumeration but not after
reset (Manivannan Sadhasivam)
Peer-to-peer DMA:
- Release per-CPU pgmap ref when vm_insert_page() fails to avoid hang
when removing the PCI device (Hou Tao)
- Remove incorrect p2pmem_alloc_mmap() warning about page refcount
(Hou Tao)
Endpoint framework:
- Add configfs sub-groups synchronously to avoid NULL pointer
dereference when racing with removal (Liu Song)
- Fix swapped parameters in pci_{primary/secondary}_epc_epf_unlink()
functions (Manikanta Maddireddy)
ASPEED PCIe controller driver:
- Add ASPEED Root Complex DT binding and driver (Jacky Chou)
Freescale i.MX6 PCIe controller driver:
- Add DT binding and driver support for an optional external refclock
in addition to the refclock from the internal PLL (Richard Zhu)
- Fix CLKREQ# control so host asserts it during enumeration and
Endpoints can use it afterwards to exit the L1.2 link state
(Richard Zhu)
NVIDIA Tegra PCIe controller driver:
- Export irq_domain_free_irqs() to allow PCI/MSI drivers that tear
down MSI domains to be built as modules (Aaron Kling)
- Allow pci-tegra to be built as a module (Aaron Kling)
NVIDIA Tegra194 PCIe controller driver:
- Relax Kconfig so tegra194 can be built for platforms beyond
Tegra194 (Vidya Sagar)
Qualcomm PCIe controller driver:
- Merge SC8180x DT binding into SM8150 (Krzysztof Kozlowski)
- Move SDX55, SDM845, QCS404, IPQ5018, IPQ6018, IPQ8074 Gen3,
IPQ8074, IPQ4019, IPQ9574, APQ8064, MSM8996, APQ8084 to dedicated
schema (Krzysztof Kozlowski)
- Add DT binding and driver support for SA8255p Endpoint being
configured by firmware (Mrinmay Sarkar)
- Parse PERST# from all PCIe bridge nodes for future platforms that
will have PERST# in Switch Downstream Ports as well as in Root
Ports (Manivannan Sadhasivam)
Renesas RZ/G3S PCIe controller driver:
- Use pci_generic_config_write() since the writability provided by
the custom wrapper is unnecessary (Claudiu Beznea)
SOPHGO PCIe controller driver:
- Disable ASPM L0s and L1 on Sophgo 2044 PCIe Root Ports (Inochi
Amaoto)
Synopsys DesignWare PCIe controller driver:
- Extend PCI_FIND_NEXT_CAP() and PCI_FIND_NEXT_EXT_CAP() to return a
pointer to the preceding Capability, to allow removal of
Capabilities that are advertised but not fully implemented (Qiang
Yu)
- Remove MSI and MSI-X Capabilities in platforms that can't support
them, so the PCI core automatically falls back to INTx (Qiang Yu)
- Add ASPM L1.1 and L1.2 Substates context to debugfs ltssm_status
for drivers that support this (Shawn Lin)
- Skip PME_Turn_Off broadcast and L2/L3 transition during suspend if
link is not up to avoid an unnecessary timeout (Manivannan
Sadhasivam)
- Revert dw-rockchip, qcom, and DWC core changes that used link-up
IRQs to trigger enumeration instead of waiting for link to be up
because the PCI core doesn't allocate bus number space for
hierarchies that might be attached (Niklas Cassel)
- Make endpoint iATU entry for MSI permanent instead of programming
it dynamically, which is slow and racy with respect to other
concurrent traffic, e.g., eDMA (Koichiro Den)
- Use iMSI-RX MSI target address when possible to fix endpoints using
32-bit MSI (Shawn Lin)
- Allow DWC host controller driver probe to continue if device is not
found or found but inactive; only fail when there's an error with
the link (Manivannan Sadhasivam)
- For controllers like NXP i.MX6QP and i.MX7D, where LTSSM registers
are not accessible after PME_Turn_Off, simply wait 10ms instead of
polling for L2/L3 Ready (Richard Zhu)
- Use multiple iATU entries to map large bridge windows and DMA
ranges when necessary instead of failing (Samuel Holland)
- Add EPC dynamic_inbound_mapping feature bit for Endpoint
Controllers that can update BAR inbound address translation without
requiring EPF driver to clear/reset the BAR first, and advertise it
for DWC-based Endpoints (Koichiro Den)
- Add EPC subrange_mapping feature bit for Endpoint Controllers that
can map multiple independent inbound regions in a single BAR,
implement subrange mapping, advertise it for DWC-based Endpoints,
and add Endpoint selftests for it (Koichiro Den)
- Make resizable BARs work for Endpoint multi-PF configurations;
previously it only worked for PF 0 (Aksh Garg)
- Fix Endpoint non-PF 0 support for BAR configuration, ATU mappings,
and Address Match Mode (Aksh Garg)
- Set up iATU when ECAM is enabled; previously IO and MEM outbound
windows weren't programmed, and ECAM-related iATU entries weren't
restored after suspend/resume, so config accesses failed (Krishna
Chaitanya Chundru)
Miscellaneous:
- Use system_percpu_wq and WQ_PERCPU to explicitly request per-CPU
work so WQ_UNBOUND can eventually be removed (Marco Crivellari)"
* tag 'pci-v7.0-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (176 commits)
PCI/bwctrl: Disable BW controller on Intel P45 using a quirk
PCI: Disable ACS SV for IDT 0x8090 switch
PCI: Disable ACS SV for IDT 0x80b5 switch
PCI: Cache ACS Capabilities register
PCI: Enable ACS after configuring IOMMU for OF platforms
PCI: Add ACS quirk for Pericom PI7C9X2G404 switches [12d8:b404]
PCI: Add ACS quirk for Qualcomm Hamoa & Glymur
PCI: Use device_lock_assert() to verify device lock is held
PCI: Use lockdep_assert_held(pci_bus_sem) to verify lock is held
PCI: Fix pci_slot_lock () device locking
PCI: Fix pci_slot_trylock() error handling
PCI: Mark Nvidia GB10 to avoid bus reset
PCI: Mark ASM1164 SATA controller to avoid bus reset
PCI: host-generic: Avoid reporting incorrect 'missing reg property' error
PCI/PME: Replace RMW of Root Status register with direct write
PCI/AER: Clear stale errors on reporting agents upon probe
PCI: Don't claim disabled bridge windows
PCI: rzg3s-host: Fix device node reference leak in rzg3s_pcie_host_parse_port()
PCI: dwc: Fix missing iATU setup when ECAM is enabled
PCI: dwc: Clean up iATU index usage in dw_pcie_iatu_setup()
...
|
||
|
Linus Torvalds
|
939faf71cf |
Merge tag 'drm-next-2026-02-11' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"Highlights:
- amdgpu support for lots of new IP blocks which means newer GPUs
- xe has a lot of SR-IOV and SVM improvements
- lots of intel display refactoring across i915/xe
- msm has more support for gen8 platforms
- Given up on kgdb/kms integration, it's too hard on modern hw
core:
- drop kgdb support
- replace system workqueue with percpu
- account for property blobs in memcg
- MAINTAINERS updates for xe + buddy
rust:
- Fix documentation for Registration constructors
- Use pin_init::zeroed() for fops initialization
- Annotate DRM helpers with __rust_helper
- Improve safety documentation for gem::Object::new()
- Update AlwaysRefCounted imports
- mm: Prevent integer overflow in page_align()
atomic:
- add drm_device pointer to drm_private_obj
- introduce gamma/degamma LUT size check
buddy:
- fix free_trees memory leak
- prevent BUG_ON
bridge:
- introduce drm_bridge_unplug/enter/exit
- add connector argument to .hpd_notify
- lots of recounting conversions
- convert rockchip inno hdmi to bridge
- lontium-lt9611uxc: switch to HDMI audio helpers
- dw-hdmi-qp: add support for HPD-less setups
- Algoltek AG6311 support
panels:
- edp: CSW MNE007QB3-1, AUO B140HAN06.4, AUO B140QAX01.H
- st75751: add SPI support
- Sitronix ST7920, Samsung LTL106HL02
- LG LH546WF1-ED01, HannStar HSD156J
- BOE NV130WUM-T08
- Innolux G150XGE-L05
- Anbernic RG-DS
dma-buf:
- improve sg_table debugging
- add tracepoints
- call clear_page instead of memset
- start to introduce cgroup memory accounting in heaps
- remove sysfs stats
dma-fence:
- add new helpers
dp:
- mst: avoid oob access with vcpi=0
hdmi:
- limit infoframes exposure to userspace
gem:
- reduce page table overhead with THP
- fix leak in drm_gem_get_unmapped_area
gpuvm:
- API sanitation for rust bindings
sched:
- introduce new helpers
panic:
- report invalid panic modes
- add kunit tests
i915/xe display:
- Expose sharpness only if num_scalers is >= 2
- Add initial Xe3P_LPD for NVL
- BMG FBC support
- Add MTL+ platforms to support dpll framework
_ fix DIMM_S DRM decoding on ICL
- Return to using AUX interrupts
- PSR/Panel replay refactoring
- use consolidation HDMI tables
- Xe3_LPD CD2X dividier changes
xe:
- vfio: add vfio_pci for intel GPU
- multi queue support
- dynamic pagemaps and multi-device SVM
- expose temp attribs in hwmon
- NO_COMPRESSION bo flag
- expose MERT OA unit
- sysfs survivability refactor
- SRIOV PF: add MERT support
- enable SR-IOV VF migration
- Enable I2C/NVM on Crescent Island
- Xe3p page reclaimation support
- introduce SRIOV scheduler groups
- add SoC remappt support in system controller
- insert compiler barriers in GuC code
- define NVL GuC firmware
- handle GT resume failure
- fix drm scheduler layering violations
- enable GSC loading and PXP for PTL
- disable GuC Power DCC strategy on PTL
- unregister drm device on probe error
i915:
- move to kernel standard fault injection
- bump recommended GuC version for DG2 and MTL
amdgpu:
- SMUIO 15.x, PSP 15.x support
- IH 6.1.1/7.1 support
- MMHUB 3.4/4.2 support
- GC 11.5.4/12.1 support
- SDMA 6.1.4/7.1/7.11.4 support
- JPEG 5.3 support
- UserQ updates
- GC 9 gfx queue reset support
- TTM memory ops parallelization
- convert legacy logging to new helpers
- DC analog fixes
amdkfd:
- GC 11.5.4/12.1 suppport
- SDMA 6.1.4/7.1 support
- per context support
- increase kfd process hash table
- Reserved SDMA rework
radeon:
- convert legacy logging to new helpers
- use devm for i2c adapters
msm:
- GPU
- Document a612/RGMU dt bindings
- UBWC 6.0 support (for A840 / Kaanapali)
- a225 support
- DPU:
- Switch to use virtual planes by default
- Fix DSI CMD panels on DPU 3.x
- Rewrite format handling to remove intermediate representation
- Fix watchdog on DPU 8.x+
- Fix TE / Vsync source setting on DPU 8.x+
- Add 3D_Mux on SC7280
- Kaanapali platform support
- Fix UBWC register programming
- Make RM reserve DSPP-enabled mixers for CRTCs with LMs
- Gamma correction support
- DP:
- Enable support for eDP 1.4+ link rate tables
- Fix MDSS1 DP indices on SA8775P, making them to work
- Fix msm_dp_ctrl_config_msa() to work with LLVM 20
- DSI:
- Document QCS8300 as compatible with SA8775P
- Kaanapali platform support
- DSI PHY:
- switch to divider_determine_rate()
- MDP5:
- Drop support for MSM8998, SDM660 and SDM630 (switch over to DPU)
- MDSS:
- Kaanapali platform support
- Fixed UBWC register programming
nova-core:
- Prepare for Turing support. This includes parsing and handling
Turing-specific firmware headers and sections as well as a Turing
Falcon HAL implementation
- Get rid of the Result<impl PinInit<T, E>> anti-pattern
- Relocate initializer-specific code into the appropriate initializer
- Use CStr::from_bytes_until_nul() to remove custom helpers
- Improve handling of unexpected firmware values
- Clean up redundant debug prints
- Replace c_str!() with native Rust C-string literals
- Update nova-core task list
nova:
- Align GEM object size to system page size
tyr:
- Use generated uAPI bindings for GpuInfo
- Replace manual sleeps with read_poll_timeout()
- Replace c_str!() with native Rust C-string literals
- Suppress warnings for unread fields
- Fix incorrect register name in print statement
nouveau:
- fix big page table support races in PTE management
- improve reclocking on tegra 186+
amdxdna:
- fix suspend race conditions
- improve handling of zero tail pointers
- fix cu_idx overwritten during command setup
- enable hardware context priority
- remove NPU2 support
- update message buffer allocation requirements
- update firmware version check
ast:
- support imported cursor buffers
- big endian fixes
etnaviv:
- add PPU flop reset support
imagination:
- add AM62P support
- introduce hw version checks
ivpu:
- implement warm boot flow
panfrost:
- add bo sync ioctl
- add GPU_PM_RT support for RZ/G3E SoC
panthor:
- add bo sync ioctl
- enable timestamp propagation
- scheduler robustness improvements
- VM termination fixes
- huge page support
rockchip:
- RK3368 HDMI Support
- get rid of atomic_check fixups
- RK3506 support
- RK3576/RK3588 improved HPD handling
rz-du:
- RZ/V2H(P) MIPI-DSI Support
v3d:
- fix DMA segment size
- convert to new logging helpers
mediatek:
- move DP training to hotplug thread
- convert logging to new helpers
- add support for HS speed DSI
- Genio 510/700/1200-EVK, Radxa NIO-12L HDMI support
atmel-hlcdc:
- switch to drmm resource
- support nomodeset
- use newer helpers
hisilicon:
- fix various DP bugs
renesas:
- fix kernel panic on reboot
exynos:
- fix vidi_connection_ioctl using wrong device
- fix vidi_connection deref user ptr
- fix concurrency regression with vidi_context
vkms:
- add configfs support for display configuration
* tag 'drm-next-2026-02-11' of https://gitlab.freedesktop.org/drm/kernel: (1610 commits)
drm/xe/pm: Disable D3Cold for BMG only on specific platforms
drm/xe: Fix kerneldoc for xe_tlb_inval_job_alloc_dep
drm/xe: Fix kerneldoc for xe_gt_tlb_inval_init_early
drm/xe: Fix kerneldoc for xe_migrate_exec_queue
drm/xe/query: Fix topology query pointer advance
drm/xe/guc: Fix kernel-doc warning in GuC scheduler ABI header
drm/xe/guc: Fix CFI violation in debugfs access.
accel/amdxdna: Move RPM resume into job run function
accel/amdxdna: Fix incorrect DPM level after suspend/resume
nouveau/vmm: start tracking if the LPT PTE is valid. (v6)
nouveau/vmm: increase size of vmm pte tracker struct to u32 (v2)
nouveau/vmm: rewrite pte tracker using a struct and bitfields.
accel/amdxdna: Fix incorrect error code returned for failed chain command
accel/amdxdna: Remove hardware context status
drm/bridge: imx8qxp-pixel-combiner: Fix bailout for imx8qxp_pc_bridge_probe()
drm/panel: ilitek-ili9882t: Remove duplicate initializers in tianma_il79900a_dsc
drm/i915/display: fix the pixel normalization handling for xe3p_lpd
drm/exynos: vidi: use ctx->lock to protect struct vidi_context member variables related to memory alloc/free
drm/exynos: vidi: fix to avoid directly dereferencing user pointer
drm/exynos: vidi: use priv->vidi_dev for ctx lookup in vidi_connection_ioctl()
...
|
||
|
Linus Torvalds
|
b7ef56a076 |
Merge tag 'media/v7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab: - Add support for GMSL1 and GMSL‑coax modules (PCI mgb4) - Add driver for TI VIP - AV1 – first kernel support (pixel‑format, decoder, transcoder) - Three new camera‑sensor drivers (os05b10, s5k3m5, s5kjn1) - Synopsys CSI‑2 receiver driver - Verisilicon & rkvdec – major fixes and enhancements - IPU6 (and 7) fixes and preparation for metadata - omap3isp: v4l2-compliance updates - Fix DVB streaming, drop wait_prepare/finish (dvb/vb2) * tag 'media/v7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (307 commits) media: uvcvideo: Pass allocation size directly to uvc_alloc_urb_buffer media: uvcvideo: Fix allocation for small frame sizes media: uvcvideo: Return queued buffers on start_streaming() failure media: uvcvideo: Create an ID namespace for streaming output terminals media: rkvdec: Add HEVC support for the VDPU383 variant media: rkvdec: Add HEVC support for the VDPU381 variant media: rkvdec: Add H264 support for the VDPU383 variant media: rkvdec: Add H264 support for the VDPU381 variant media: rkvdec: Disable multicore support media: rkvdec: Enable all clocks without naming them media: rkvdec: Support per-variant interrupt handler media: rkvdec: Add RCB and SRAM support media: rkvdec: Add variant specific coded formats list media: rkvdec: Move hevc functions to common file media: rkvdec: Move h264 functions to common file media: rkvdec: Use structs to represent the HW RPS media: rkvdec: Move cabac tables to their own source file media: rkvdec: Switch to using structs instead of writel media: visl: Add HEVC short and long term RPS sets media: v4l2-ctrls: Add hevc_ext_sps_[ls]t_rps controls ... |
||
|
Linus Torvalds
|
d061251387 |
Merge tag 'sound-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"It's been relatively calm for a new era; majority of changes are for
ASoC, mostly device-specific changes, while there are a bit of
cleanups in core stuff. A few SPI API and regmap updates are included
to be used by sound drivers, too.
Core:
- A few trivial cleanups about __free() and runtime PM macros
- Convert to new snd_seq_bus binding
ASoC:
- Generic SDCA support for reporting jack events
- Continuing platform support, cleanup and feature improvements for
AMD, Intel, Qualcomm and SOF code
- Platform description improvements for the Cirrus drivers
- Support for NXP i.MX952, Realtek RT1320 and RT5575, and Sophogo
CV1800B
HD- and USB-audio:
- Many quirks as usual"
* tag 'sound-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (341 commits)
ALSA: usb-audio: Add DSD support for iBasso DC04U
ALSA: mixer: oss: Add card disconnect checkpoints
ASoC: SOF: ipc4-control: Set correct error code in refresh_bytes_control
ASoC: SOF: Intel: select CONFIG_SND_HDA_EXT_CORE from SND_SOC_SOF_HDA_COMMON
ALSA: usb-audio: Add iface reset and delay quirk for AB13X USB Audio
ASoC: amd: maintainer information
ALSA: ctxfi: Add quirk for SE-300PCIE variant (160b:0102)
ALSA: hda/generic: fix typos in comments
ALSA: hda/realtek - Enable mute LEDs on HP ENVY x360 15-es0xxx
ALSA: hda/conexant: Add quirk for HP ZBook Studio G4
ASoC: fsl_asrc_dma: allocate memory from dma device
ASoC: fsl_asrc: Add support for i.MX952 platform
ASoC: fsl_asrc_m2m: Add option to start ASRC before DMA device for M2M
ASoC: dt-bindings: fsl,imx-asrc: Add support for i.MX952 platform
ALSA: oss: delete self assignment
ASoC: rockchip: spdif: Convert to FIELD_PREP
ASoC: rockchip: spdif: Fill IEC958 CS info per params
ASoC: rockchip: spdif: Add support for format S32_LE
ASoC: rockchip: spdif: Add support for set mclk rate
ASoC: rockchip: spdif: Swap PCM and DAI component registration order
...
|
||
|
Linus Torvalds
|
532355a756 |
Merge tag 'hwmon-for-v7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"New PMBus drivers:
- HiTRON HAC300S power supply
- Monolithic MP5926 Hot-Swap Controller
- STEF48H28 hot-swap controller
Support for new chips in existing drivers
- Support for Pro WS TRX50-SAGE WIFI A and ROG MAXIMUS X HERO
(asus-ec-sensors)
- Support for Dell OptiPlex 7080 (dell-smm)
- Support for F81968 (f71882fg)
- Support for Micro PC 2 (gpd-fan)
- New customer ID for ASRock Z590 Taichi (nct6683)
- Support for ASUS Pro WS WRX90E-SAGE SE (nct6775)
- Support for SHT85 (sht3x)
- Support for P3T1035 and P3T2030 (tmp108)
Bug fixes:
- Revert "fix" for UAF which didn't fix a UAF but introduced a race
condition resulting in a NULL pointer crash (ibmpex)
- Fix failure to instantiate driver if the chip is configured for VID
mode (pmbus/mpq8785)
- Use READ/WRITE_ONCE to avoid compiler optimization induced race
(max16065)
- Resource leak fixes (nct7363, emc2305)
Other notable changes:
- Support for temperature limit thresholds (cros_ec)
- Add TjMax for Silvermont through Tremont Atoms (coretemp)
Various other minor improvements"
* tag 'hwmon-for-v7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (42 commits)
hwmon: (pmbus/mpq8785) fix VOUT_MODE mismatch during identification
Revert "hwmon: (ibmpex) fix use-after-free in high/low store"
hwmon: (max16065) Use READ/WRITE_ONCE to avoid compiler optimization induced race
hwmon: (nct6775) use sysfs_emit instead of sprintf
hwmon: pmbus: fix table in STEF48H28 documentation
hwmon: Add support for HiTRON HAC300S PSU
dt-bindings: trivial-devices: Add hitron,hac300s
hwmon: (cros_ec) Add support for temperature thresholds
hwmon: (cros_ec) Move temperature channel params to a macro
hwmon: (cros_ec) Add support for fan target speed
hwmon: (cros_ec) Split up supported features in the documentation
hwmon: (tmp108) Add P3T1035 and P3T2030 support
hwmon: (tmp108) Add support for P3T1035 and P3T2030
dt-bindings: hwmon: ti,tmp108: Add P3T1035,P3T2030
hwmon: pmbus: add support for STEF48H28
dt-bindings: hwmon: add STEF48H28
hwmon: (nct7363) Fix a resource leak in nct7363_present_pwm_fanin
hwmon: (emc2305) Fix a resource leak in emc2305_of_parse_pwm_child
hwmon: (gpd-fan) add support for Micro PC 2
hwmon: (coretemp) Add TjMax for Silvermont through Tremont Atoms
...
|
||
|
Linus Torvalds
|
d701782152 |
Merge tag 'gpio-updates-for-v7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"There are two new drivers and some changes to GPIO core but mostly
just GPIO driver updates across a wide array of files, adding support
for new models as well as various refactoring changes. Nothing
controversial and everything has spent a good measure of time in
linux-next.
GPIOLIB core:
- shrink the GPIO bus driver stub code
- rework software node support for "undefined" software nodes
- provide and use devm_fwnode_gpiod_get_optional()
- only compile the OF quirk for MT2701 when needed
New drivers:
- add the GPIO driver for ROHM bd72720
- add the gpio-line-mux driver providing 1-to-many mapping for a
single real GPIO
Driver changes:
- refactor gpio-pca9570: use lock guard, add missing headers, use
devres consistently
- add support for a new model (G7 Aspeed sgpiom) to the aspeed-sgpio
driver along with some prerequisite refactoring
- use device_get_match_data() where applicable and save some lines
- add support for more models to gpio-cadence
- add the compatible property to reset-gpio and use it in shared GPIO
management
- drop unnecessary use of irqd_get_trigger_type() in gpio-max77759
- add support for a new variant to gpio-pca953x
- extend build coverage with COMPILE_TEST for more drivers
- constify configfs structures in gpio-sim and gpio-virtuser
- add support for the K3 SoC to gpio-spacemit
- implement the missing .get_direction() callback in gpio-max77620
- add support for Tegra264 to gpio-tegra186
- drop unneeded MODULE_ALIAS() from gpio-menz127
DT bindings:
- document support for the opencores GPIO controller in gpio-mmio
- document new variants for gpio-pca953x
Documentation:
- extensively describe interrupt source detection for gpio-pca953x
and add more models to the list of supported variants"
* tag 'gpio-updates-for-v7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (59 commits)
gpio: tegra186: Add support for Tegra264
dt-bindings: gpio: Add Tegra264 support
gpio: spacemit-k1: Use PDR for pin direction, not SDR/CDR
gpio: max77620: Implement .get_direction() callback
gpio: aspeed-sgpio: Support G7 Aspeed sgpiom controller
dt-bindings: gpio: aspeed,sgpio: Support ast2700
gpio: aspeed-sgpio: Convert IRQ functions to use llops callbacks
gpio: aspeed-sgpio: Create llops to handle hardware access
gpio: aspeed-sgpio: Remove unused bank name field
gpio: aspeed-sgpio: Change the macro to support deferred probe
regulator: bd71815: switch to devm_fwnode_gpiod_get_optional
gpiolib: introduce devm_fwnode_gpiod_get_optional() wrapper
gpio: mmio: Add compatible for opencores GPIO
dt-bindings: gpio-mmio: Correct opencores GPIO
gpio: pca9570: use lock guards
gpio: pca9570: Don't use "proxy" headers
gpio: pca9570: Use devm_mutex_init() for mutex initialization
MAINTAINERS: Add ROHM BD72720 PMIC
power: supply: bd71828-power: Support ROHM BD72720
power: supply: bd71828: Support wider register addresses
...
|
||
|
Linus Torvalds
|
893ace4df0 |
Merge tag 'pwrseq-updates-for-v7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull power sequencing updates from Bartosz Golaszewski: "One new driver and support for more models added to the existing qcom-wcn driver as well as some minor tweaks and fixes. New drivers: - add the power sequencing driver for PCIe M.2 connectors Driver improvements: - use device_get_match_data() where applicable - add support for the WCN39xx family of models to pwrseq-qcom-wcn Fixes: - fix a locking issue in pwrseq core - fix retval check in pwrseq-qcom-wcn" * tag 'pwrseq-updates-for-v7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: power: sequencing: qcom-wcn: fix error path for VDDIO handling power: sequencing: fix missing state_lock in pwrseq_power_on() error path power: sequencing: Add the Power Sequencing driver for the PCIe M.2 connectors dt-bindings: connector: Add PCIe M.2 Mechanical Key M connector power: sequencing: qcom-wcn: add support for WCN39xx regulator: dt-bindings: qcom,wcn3990-pmu: describe PMUs on WCN39xx power: sequencing: qcom-wcn: use device_get_match_data() |
||
|
Linus Torvalds
|
c371f62da7 |
Merge tag 'pwm/for-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm updates from Uwe Kleine-König: "There are a few patches adapting to changes in Rust land which seems to be the norm since there is a pwm driver written in Rust. Other than that just a few cleanups and a single fix for the tiehrpwm driver that came in too late for making it into v6.19. Thanks to Andy Shevchenko, Bartosz Golaszewski, Daniel Almeida and Michal Wilczynski for reviews in this cycle, and to Alice Ryhl, Ben Zong-You Xie, Gokul Praveen, Kari Argillander, Markus Probst, Raag Jadav, Shankari Anand, Tamir Duberstein and Vladimir Zapolskiy for code contributions" * tag 'pwm/for-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux: pwm: Remove redundant check in pwm_ops_check() pwm: tiehrpwm: Enable pwmchip's parent device before setting configuration pwm: Update MAINTAINER entry rust: pwm: Add __rust_helper to helpers rust: pwm: Simplify to_result call sites and unsafe blocks rust: pwm: Fix potential memory leak on init error dt-bindings: pwm: nxp,lpc32xx-pwm: Specify clocks property as mandatory pwm: th1520: Replace `kernel::c_str!` with C-Strings pwm: dwc: Use size macro pwm: Emit native configuration in /sys/kernel/debug/pwm rust: pwm: Add UnregisteredChip wrapper around Chip rust: pwm: Update ARef and AlwaysRefCounted imports to use sync::aref |
||
|
Linus Torvalds
|
e86dda7bde |
Merge tag 'spi-v6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"The highlight here is that David Lechner has added support for
multi-lane SPI devices. Unlike the existing dual/quad SPI support this
is for devices (typically ADCs/DACs) which support multiple
independent data streams over multiple data lanes, instead of sending
one data stream N times as fast they simultaneously transfer N
different data streams.
This is very similar to the case where multiple devices are grouped
together but in this case it's a single device in a way that's visible
to software.
Otherwise there's been quite a bit of work on existing drivers, both
cleanup and feature improvement, and a reasonable collection of new
drivers.
- Support for multi-lane SPI devices
- Preparatory work for some memory mapped flash improvements that
will happen in the MTD subsystem
- Several conversions to fwnode APIs
- A bunch of cleanup and hardening work on the ST drivers
- Support for DMA mode on Renesas RZV2H and i.MX target mode
- Support for ATCSPI200, AXIADO AX300, NXP XPI and Renesas RZ/N1"
* tag 'spi-v6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (108 commits)
spi: tools: Add include folder to .gitignore
spi: cadence-qspi: Add support for the Renesas RZ/N1 controller
spi: cadence-qspi: Kill cqspi_jh7110_clk_init
spi: dt-bindings: cdns,qspi-nor: Add Renesas RZ/N1D400 to the list
spi: geni-qcom: Add target abort support
spi: geni-qcom: Drop unused msg parameter from timeout handlers
spi: geni-qcom: Fix abort sequence execution for serial engine errors
spi: geni-qcom: Improve target mode allocation by using proper allocation functions
spi: xilinx: use device property accessors.
dt-bindings: spi: Add binding for Faraday FTSSP010
spi: axi-spi-engine: support SPI_MULTI_LANE_MODE_STRIPE
spi: dt-bindings: adi,axi-spi-engine: add multi-lane support
spi: Documentation: add page on multi-lane support
spi: add multi_lane_mode field to struct spi_transfer
spi: support controllers with multiple data lanes
spi: dt-bindings: add spi-{tx,rx}-lane-map properties
spi: dt-bindings: change spi-{rx,tx}-bus-width to arrays
spi: dw: Remove not-going-to-be-supported code for Baikal SoC
spi: cadence-qspi: Use a default value for cdns,fifo-width
spi: cadence-qspi: Make sure write protection is disabled
...
|
||
|
Linus Torvalds
|
f6c42489fe |
Merge tag 'regulator-v6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"There's a bunch of new drivers here, plus a lot of hardening for the
supply resolution code which allow us to support systems where we have
two PMICs each of which has regulators supplied by the other. This did
work a long time ago but got broken as part of improved integration
with the device model, it's fairly rare so nobody noticed.
- Improvements for supply handling from André Draszik to allow
systems with two PMICs with supply/consumer relationships in both
directions to instantiate.
- New drivers for Maxim MAX776750, Realtek RT8902, Samsung S2MPG11,
Texas Instuments TPS65185.
This have also pulls in some MFD updates which are build dependencies
for the Samsung S2MPG11 support"
* tag 'regulator-v6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (42 commits)
regulator: s2mps11: more descriptive gpio consumer name
regulator: s2mps11: add S2MPG11 regulator
regulator: s2mps11: refactor S2MPG10 regulator macros for S2MPG11 reuse
regulator: s2mps11: refactor S2MPG10 ::set_voltage_time() for S2MPG11 reuse
regulator: s2mps11: add S2MPG10 regulator
regulator: s2mps11: refactor handling of external rail control
regulator: s2mps11: update node parsing (allow -supply properties)
regulator: s2mps11: place constants on right side of comparison tests
regulator: s2mps11: use dev_err_probe() where appropriate
regulator: s2mps11: drop two needless variable initialisations
regulator: add REGULATOR_LINEAR_VRANGE macro
regulator: dt-bindings: add s2mpg11-pmic regulators
regulator: dt-bindings: add s2mpg10-pmic regulators
dt-bindings: firmware: google,gs101-acpm-ipc: convert regulators to lowercase
mfd: sec: Add support for S2MPG11 PMIC via ACPM
mfd: sec: s2mpg10: Reorder regulators for better probe performance
dt-bindings: mfd: Add samsung,s2mpg11-pmic
dt-bindings: mfd: samsung,s2mpg10-pmic: Link to its regulators
dt-bindings: mfd: samsung,s2mps11: Split s2mpg10-pmic into separate file
mfd: sec: Drop now unused struct sec_pmic_dev::irq_data
...
|