Pull networking updates from Paolo Abeni:
"Core & protocols:
- A significant effort all around the stack to guide the compiler to
make the right choice when inlining code, to avoid unneeded calls
for small helper and stack canary overhead in the fast-path.
This generates better and faster code with very small or no text
size increases, as in many cases the call generated more code than
the actual inlined helper.
- Extend AccECN implementation so that is now functionally complete,
also allow the user-space enabling it on a per network namespace
basis.
- Add support for memory providers with large (above 4K) rx buffer.
Paired with hw-gro, larger rx buffer sizes reduce the number of
buffers traversing the stack, dincreasing single stream CPU usage
by up to ~30%.
- Do not add HBH header to Big TCP GSO packets. This simplifies the
RX path, the TX path and the NIC drivers, and is possible because
user-space taps can now interpret correctly such packets without
the HBH hint.
- Allow IPv6 routes to be configured with a gateway address that is
resolved out of a different interface than the one specified,
aligning IPv6 to IPv4 behavior.
- Multi-queue aware sch_cake. This makes it possible to scale the
rate shaper of sch_cake across multiple CPUs, while still enforcing
a single global rate on the interface.
- Add support for the nbcon (new buffer console) infrastructure to
netconsole, enabling lock-free, priority-based console operations
that are safer in crash scenarios.
- Improve the TCP ipv6 output path to cache the flow information,
saving cpu cycles, reducing cache line misses and stack use.
- Improve netfilter packet tracker to resolve clashes for most
protocols, avoiding unneeded drops on rare occasions.
- Add IP6IP6 tunneling acceleration to the flowtable infrastructure.
- Reduce tcp socket size by one cache line.
- Notify neighbour changes atomically, avoiding inconsistencies
between the notification sequence and the actual states sequence.
- Add vsock namespace support, allowing complete isolation of vsocks
across different network namespaces.
- Improve xsk generic performances with cache-alignment-oriented
optimizations.
- Support netconsole automatic target recovery, allowing netconsole
to reestablish targets when underlying low-level interface comes
back online.
Driver API:
- Support for switching the working mode (automatic vs manual) of a
DPLL device via netlink.
- Introduce PHY ports representation to expose multiple front-facing
media ports over a single MAC.
- Introduce "rx-polarity" and "tx-polarity" device tree properties,
to generalize polarity inversion requirements for differential
signaling.
- Add helper to create, prepare and enable managed clocks.
Device drivers:
- Add Huawei hinic3 PF etherner driver.
- Add DWMAC glue driver for Motorcomm YT6801 PCIe ethernet
controller.
- Add ethernet driver for MaxLinear MxL862xx switches
- Remove parallel-port Ethernet driver.
- Convert existing driver timestamp configuration reporting to
hwtstamp_get and remove legacy ioctl().
- Convert existing drivers to .get_rx_ring_count(), simplifing the RX
ring count retrieval. Also remove the legacy fallback path.
- Ethernet high-speed NICs:
- Broadcom (bnxt, bng):
- bnxt: add FW interface update to support FEC stats histogram
and NVRAM defragmentation
- bng: add TSO and H/W GRO support
- nVidia/Mellanox (mlx5):
- improve latency of channel restart operations, reducing the
used H/W resources
- add TSO support for UDP over GRE over VLAN
- add flow counters support for hardware steering (HWS) rules
- use a static memory area to store headers for H/W GRO,
leading to 12% RX tput improvement
- Intel (100G, ice, idpf):
- ice: reorganizes layout of Tx and Rx rings for cacheline
locality and utilizes __cacheline_group* macros on the new
layouts
- ice: introduces Synchronous Ethernet (SyncE) support
- Meta (fbnic):
- adds debugfs for firmware mailbox and tx/rx rings vectors
- Ethernet virtual:
- geneve: introduce GRO/GSO support for double UDP encapsulation
- Ethernet NICs consumer, and embedded:
- Synopsys (stmmac):
- some code refactoring and cleanups
- RealTek (r8169):
- add support for RTL8127ATF (10G Fiber SFP)
- add dash and LTR support
- Airoha:
- AN8811HB 2.5 Gbps phy support
- Freescale (fec):
- add XDP zero-copy support
- Thunderbolt:
- add get link setting support to allow bonding
- Renesas:
- add support for RZ/G3L GBETH SoC
- Ethernet switches:
- Maxlinear:
- support R(G)MII slow rate configuration
- add support for Intel GSW150
- Motorcomm (yt921x):
- add DCB/QoS support
- TI:
- icssm-prueth: support bridging (STP/RSTP) via the switchdev
framework
- Ethernet PHYs:
- Realtek:
- enable SGMII and 2500Base-X in-band auto-negotiation
- simplify and reunify C22/C45 drivers
- Micrel: convert bindings to DT schema
- CAN:
- move skb headroom content into skb extensions, making CAN
metadata access more robust
- CAN drivers:
- rcar_canfd:
- add support for FD-only mode
- add support for the RZ/T2H SoC
- sja1000: cleanup the CAN state handling
- WiFi:
- implement EPPKE/802.1X over auth frames support
- split up drop reasons better, removing generic RX_DROP
- additional FTM capabilities: 6 GHz support, supported number of
spatial streams and supported number of LTF repetitions
- better mac80211 iterators to enumerate resources
- initial UHR (Wi-Fi 8) support for cfg80211/mac80211
- WiFi drivers:
- Qualcomm/Atheros:
- ath11k: support for Channel Frequency Response measurement
- ath12k: a significant driver refactor to support multi-wiphy
devices and and pave the way for future device support in the
same driver (rather than splitting to ath13k)
- ath12k: support for the QCC2072 chipset
- Intel:
- iwlwifi: partial Neighbor Awareness Networking (NAN) support
- iwlwifi: initial support for U-NII-9 and IEEE 802.11bn
- RealTek (rtw89):
- preparations for RTL8922DE support
- Bluetooth:
- implement setsockopt(BT_PHY) to set the connection packet type/PHY
- set link_policy on incoming ACL connections
- Bluetooth drivers:
- btusb: add support for MediaTek7920, Realtek RTL8761BU and 8851BE
- btqca: add WCN6855 firmware priority selection feature"
* tag 'net-next-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1254 commits)
bnge/bng_re: Add a new HSI
net: macb: Fix tx/rx malfunction after phy link down and up
af_unix: Fix memleak of newsk in unix_stream_connect().
net: ti: icssg-prueth: Add optional dependency on HSR
net: dsa: add basic initial driver for MxL862xx switches
net: mdio: add unlocked mdiodev C45 bus accessors
net: dsa: add tag format for MxL862xx switches
dt-bindings: net: dsa: add MaxLinear MxL862xx
selftests: drivers: net: hw: Modify toeplitz.c to poll for packets
octeontx2-pf: Unregister devlink on probe failure
net: renesas: rswitch: fix forwarding offload statemachine
ionic: Rate limit unknown xcvr type messages
tcp: inet6_csk_xmit() optimization
tcp: populate inet->cork.fl.u.ip6 in tcp_v6_syn_recv_sock()
tcp: populate inet->cork.fl.u.ip6 in tcp_v6_connect()
ipv6: inet6_csk_xmit() and inet6_csk_update_pmtu() use inet->cork.fl.u.ip6
ipv6: use inet->cork.fl.u.ip6 and np->final in ip6_datagram_dst_update()
ipv6: use np->final in inet6_sk_rebuild_header()
ipv6: add daddr/final storage in struct ipv6_pinfo
net: stmmac: qcom-ethqos: fix qcom_ethqos_serdes_powerup()
...
The s2io driver supports Exar (formerly Neterion and S2io) PCI-X 10
Gigabit Ethernet cards. Hardware supporting PCI-X has not been
manufactured in years. On x86, it was quickly replaced by PCIe. While
it stuck around longer on POWER hardware, the last POWER hardware to
support it was POWER7, which is not supported by ppc64le Linux
distributions. The last supported mainstream ppc64 Linux distribution
was RHEL 7; while it is still supported under ELS, ELS is only
available for x86 and IBM Z. It is possible to use many PCI-X cards in
standard PCI slots (which are still available on new motherboards), but
it does not make sense to do so for 10 Gigabit Ethernet because the
maximum bandwidth of standard PCI is only 1067 Mbps. It is therefore
highly unlikely that this driver is still being used. Remove the
driver, and move the former maintainer to the CREDITS file (restoring
credit for the vxge driver, which was removed in commit f05643a0f6
("eth: remove neterion/vxge").
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Link: https://patch.msgid.link/20260126031352.22997-1-enelsonmoore@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The root document usually has a special :ref:`genindex` link to the
generated index. This is also the case for Documentation/index.rst. The
other index.rst files deeper in the directory hierarchy usually don't.
For SPHINXDIRS builds, the root document isn't Documentation/index.rst,
but some other index.rst in the hierarchy. Currently they have a
".. only::" block to add the index link when doing SPHINXDIRS html
builds.
This is obviously very tedious and repetitive. The link is also added to
all index.rst files in the hierarchy for SPHINXDIRS builds, not just the
root document.
Put the boilerplate in a sphinx-includes/subproject-index.rst file, and
include it at the end of the root document for subproject builds in an
ad-hoc source-read extension defined in conf.py.
For now, keep having the boilerplate in translations, because this
approach currently doesn't cover translated index link headers.
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Tested-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
[jc: did s/doctree/kern_doc_dir/ ]
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260123143149.2024303-1-jani.nikula@intel.com>
Pull rdma updates from Jason Gunthorpe:
"A new Pensando ionic driver, a new Gen 3 HW support for Intel irdma,
and lots of small bnxt_re improvements.
- Small bug fixes and improves to hfi1, efa, mlx5, erdma, rdmarvt,
siw
- Allow userspace access to IB service records through the rdmacm
- Optimize dma mapping for erdma
- Fix shutdown of the GSI QP in mana
- Support relaxed ordering MR and fix a corruption bug with mlx5 DMA
Data Direct
- Many improvement to bnxt_re:
- Debugging features and counters
- Improve performance of some commands
- Change flow_label reporting in completions
- Mirror vnic
- RDMA flow support
- New RDMA driver for Pensando Ethernet devices: ionic
- Gen 3 hardware support for the Intel irdma driver
- Fix rdma routing resolution with VRFs"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (85 commits)
RDMA/ionic: Fix memory leak of admin q_wr
RDMA/siw: Always report immediate post SQ errors
RDMA/bnxt_re: improve clarity in ALLOC_PAGE handler
RDMA/irdma: Remove unused struct irdma_cq fields
RDMA/irdma: Fix positive vs negative error codes in irdma_post_send()
RDMA/bnxt_re: Remove non-statistics counters from hw_counters
RDMA/bnxt_re: Add debugfs info entry for device and resource information
RDMA/bnxt_re: Fix incorrect errno used in function comments
RDMA: Use %pe format specifier for error pointers
RDMA/ionic: Use ether_addr_copy instead of memcpy
RDMA/ionic: Fix build failure on SPARC due to xchg() operand size
RDMA/rxe: Fix race in do_task() when draining
IB/sa: Fix sa_local_svc_timeout_ms read race
IB/ipoib: Ignore L3 master device
RDMA/core: Use route entry flag to decide on loopback traffic
RDMA/core: Resolve MAC of next-hop device without ARP support
RDMA/core: Squash a single user static function
RDMA/irdma: Update Kconfig
RDMA/irdma: Extend CQE Error and Flush Handling for GEN3 Devices
RDMA/irdma: Add Atomic Operations support
...
Pull documentation updates from Jonathan Corbet:
"It has been a relatively busy cycle in docsland, with changes all
over:
- Bring the kernel memory-model docs into the Sphinx build in the
"literal include" mode.
- Lots of build-infrastructure work, further cleaning up long-term
kernel-doc technical debt. The sphinx-pre-install tool has been
converted to Python and updated for current systems.
- A new tool to detect when documents have been moved and generate
HTML redirects; this can be used on kernel.org (or any other site
hosting the rendered docs) to avoid breaking links.
- Automated processing of the YAML files describing the netlink
protocol.
- A significant update of the maintainer's PGP guide.
... and a seemingly endless series of typo fixes, build-problem fixes,
etc"
* tag 'docs-6.18' of git://git.lwn.net/linux: (193 commits)
Documentation/features: Update feature lists for 6.17-rc7
docs: remove cdomain.py
Documentation/process: submitting-patches: fix typo in "were do"
docs: dev-tools/lkmm: Fix typo of missing file extension
Documentation: trace: histogram: Convert ftrace docs cross-reference
Documentation: trace: histogram-design: Wrap introductory note in note:: directive
Documentation: trace: historgram-design: Separate sched_waking histogram section heading and the following diagram
Documentation: trace: histogram-design: Trim trailing vertices in diagram explanation text
Documentation: trace: histogram: Fix histogram trigger subsection number order
docs: driver-api: fix spelling of "buses".
Documentation: fbcon: Use admonition directives
Documentation: fbcon: Reindent 8th step of attach/detach/unload
Documentation: fbcon: Add boot options and attach/detach/unload section headings
docs: filesystems: sysfs: add remaining top level sysfs directory descriptions
docs: filesystems: sysfs: clarify symlink destinations in dev and bus/devices descriptions
docs: filesystems: sysfs: remove top level sysfs net directory
docs: maintainer: Fix ambiguous subheading formatting
docs: kdoc: a few more dump_typedef() tweaks
docs: kdoc: remove redundant comment stripping in dump_typedef()
docs: kdoc: remove some dead code in dump_typedef()
...
FW crashes are detected based on uptime going back, expose the uptime
via devlink health diagnose.
$ devlink -j health diagnose pci/0000:01:00.0 reporter fw
{"last_heartbeat":{"fw_uptime":{"sec":201,"msec":76}}}
$ devlink -j health diagnose pci/0000:01:00.0 reporter fw
last_heartbeat:
fw_uptime:
sec: 201 msec: 76
Reviewed-by: Lee Trager <lee@trager.us>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250916231420.1693955-9-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This ethtool counter is meant to help with observing how many times the
congestion event was triggered but on query there was no state change.
This would help to indicate when a work item was scheduled to run too
late and in the meantime the congestion state changed back to previous
state.
While at it, do a driveby typo fix in documentation for
pci_bw_inbound_high.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1757237976-531416-3-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for XDP statistics collection and reporting via rtnl_link
and netdev_queue API.
For XDP programs without frags support, fbnic requires MTU to be less
than the HDS threshold. If an over-sized frame is received, the frame
is dropped and recorded as rx_length_errors reported via ip stats to
highlight that this is an error.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Link: https://patch.msgid.link/20250813221319.3367670-9-mohsin.bashr@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Pull documentation updates from Jonathan Corbet:
"It has been a relatively busy cycle for docs, especially the build
system:
- The Perl kernel-doc script was added to 2.3.52pre1 just after the
turn of the millennium. Over the following 25 years, it accumulated
a vast amount of cruft, all in a language few people want to deal
with anymore. Mauro's Python replacement in 6.16 faithfully
reproduced all of the cruft in the hope of avoiding regressions.
Now that we have a more reasonable code base, though, we can work
on cleaning it up; many of the changes this time around are toward
that end.
- A reorganization of the ext4 docs into the usual TOC format.
- Various Chinese translations and updates.
- A new script from Mauro to help with docs-build testing.
- A new document for linked lists
- A sweep through MAINTAINERS fixing broken GitHub git:// repository
links.
...and lots of fixes and updates"
* tag 'docs-6.17' of git://git.lwn.net/linux: (147 commits)
scripts: add origin commit identification based on specific patterns
sphinx: kernel_abi: fix performance regression with O=<dir>
Documentation: core-api: entry: Replace deprecated KVM entry/exit functions
docs: fault-injection: drop reference to md-faulty
docs: document linked lists
scripts: kdoc: make it backward-compatible with Python 3.7
docs: kernel-doc: emit warnings for ancient versions of Python
Documentation/rtla: Describe exit status
Documentation/rtla: Add include common_appendix.rst
docs: kernel: Clarify printk_ratelimit_burst reset behavior
Documentation: ioctl-number: Don't repeat macro names
Documentation: ioctl-number: Shorten macros table
Documentation: ioctl-number: Correct full path to papr-physical-attestation.h
Documentation: ioctl-number: Extend "Include File" column width
Documentation: ioctl-number: Fix linuxppc-dev mailto link
overlayfs.rst: fix typos
docs: kdoc: emit a warning for ancient versions of Python
docs: kdoc: clean up check_sections()
docs: kdoc: directly access the always-there KdocItem fields
docs: kdoc: straighten up dump_declaration()
...
Implement the PCIe Congestion Event notifier which triggers a work item
to query the PCIe Congestion Event object. The result of the congestion
state is reflected in the new ethtool stats:
* pci_bw_inbound_high: the device has crossed the high threshold for
inbound PCIe traffic.
* pci_bw_inbound_low: the device has crossed the low threshold for
inbound PCIe traffic
* pci_bw_outbound_high: the device has crossed the high threshold for
outbound PCIe traffic.
* pci_bw_outbound_low: the device has crossed the low threshold for
outbound PCIe traffic
The high and low thresholds are currently configured at 90% and 75%.
These are hysteresis thresholds which help to check if the
PCI bus on the device side is in a congested state.
If low + 1 = high then the device is in a congested state. If low == high
then the device is not in a congested state.
The counters are also documented.
A follow-up patch will make the thresholds configurable.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1752589821-145787-3-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Documentation/networking/device_drivers/ethernet/marvell/octeontx2.rst
Fixes a spelling mistake: "funcionality" → "functionality".
Signed-off-by: Faisal Bukhari <faisalbukhari523@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Long before introduction of lore.kernel.org, people would link
to LKML threads on third-party archives (here spinics.net), which
in some cases can be unreliable (as these were outside of
kernel.org control). Replace links to them with lore counterparts
(if any).
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250611065254.36608-2-bagasdotme@gmail.com
Adding the base directory of debugfs to the driver.
In order for the folder to be unique per driver instantiation,
the chosen name is the device name.
This commit contains the initialization and the
base folder.
The creation of the base folder may fail, but is considered
non-fatal.
Signed-off-by: David Arinzon <darinzon@amazon.com>
Link: https://patch.msgid.link/20250617110545.5659-8-darinzon@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Adding basic devlink capability support of reloading the driver.
This capability is required to support driver init type
devlink params (DEVLINK_PARAM_CMODE_DRIVERINIT). Such params
require reloading of the driver (destroy/restore sequence).
The reloading is done by the devlink framework using the
hooks provided by the driver.
Signed-off-by: David Arinzon <darinzon@amazon.com>
Link: https://patch.msgid.link/20250617110545.5659-4-darinzon@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is [1/3] part of hinic3 Ethernet driver initial submission.
With this patch hinic3 is a valid kernel module but non-functional
driver.
The driver parts contained in this patch:
Module initialization.
PCI driver registration but with empty id_table.
Auxiliary driver registration.
Net device_ops registration but open/stop are empty stubs.
tx/rx logic.
All major data structures of the driver are fully introduced with the
code that uses them but without their initialization code that requires
management interface with the hw.
Co-developed-by: Xin Guo <guoxin09@huawei.com>
Signed-off-by: Xin Guo <guoxin09@huawei.com>
Signed-off-by: Fan Gong <gongfan1@huawei.com>
Co-developed-by: Gur Stavi <gur.stavi@huawei.com>
Signed-off-by: Gur Stavi <gur.stavi@huawei.com>
Link: https://patch.msgid.link/76a137ffdfe115c737c2c224f0c93b60ba53cc16.1747736586.git.gur.stavi@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ICSSG firmware maintains set of stats called PA_STATS.
Currently the driver only dumps 4 stats. Add support for dumping more
stats.
The offset for different stats are defined as MACROs in icssg_switch_map.h
file. All the offsets are for Slice0. Slice1 offsets are slice0 + 4.
The offset calculation is taken care while reading the stats in
emac_update_hardware_stats().
The statistics are documented in
Documentation/networking/device_drivers/icssg_prueth.rst
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Link: https://patch.msgid.link/20250424095316.2643573-1-danishanwar@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch add coverage for TMI stats including PTP stats and drop
stats.
PTP stats include illegal requests, bad timestamp and good timestamps.
The bad timestamp and illegal request counters are reported under as
`error` via `ethtool -T` Both these counters are individually being
reported via `ethtool -S`
The good timestamp stats are being reported as `pkts` via `ethtool -T`
ethtool -S eth0 | grep "ptp"
ptp_illegal_req: 0
ptp_good_ts: 0
ptp_bad_ts: 0
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250410070859.4160768-5-mohsin.bashr@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This patch provides coverage to the RXB (RX Buffer) stats. RXB stats
are divided into 3 sections: RXB enqueue, RXB FIFO, and RXB dequeue
stats.
The RXB enqueue/dequeue stats are indexed from 0-3 and cater for the
input/output counters whereas, the RXB fifo stats are indexed from 0-7.
The RXB also supports pause frame stats counters which we are leaving
for a later patch.
ethtool -S eth0 | grep rxb
rxb_integrity_err0: 0
rxb_mac_err0: 0
rxb_parser_err0: 0
rxb_frm_err0: 0
rxb_drbo0_frames: 1433543
rxb_drbo0_bytes: 775949081
---
---
rxb_intf3_frames: 1195711
rxb_intf3_bytes: 739650210
rxb_pbuf3_frames: 1195711
rxb_pbuf3_bytes: 765948092
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250410070859.4160768-4-mohsin.bashr@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This patch provides support for hardware queue stats and covers
packet errors for RX-DMA engine, RCQ drops and BDQ drops.
The packet errors are also aggregated with the `rx_errors` stats in the
`rtnl_link_stats` as well as with the `hw_drops` in the queue API.
The RCQ and BDQ drops are aggregated with `rx_over_errors` in the
`rtnl_link_stats` as well as with the `hw_drop_overruns` in the queue API.
ethtool -S eth0 | grep -E 'rde'
rde_0_pkt_err: 0
rde_0_pkt_cq_drop: 0
rde_0_pkt_bdq_drop: 0
---
---
rde_127_pkt_err: 0
rde_127_pkt_cq_drop: 0
rde_127_pkt_bdq_drop: 0
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250410070859.4160768-3-mohsin.bashr@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Pull powerpc updates from Madhavan Srinivasan:
- Remove support for IBM Cell Blades
- SMP support for microwatt platform
- Support for inline static calls on PPC32
- Enable pmu selftests for power11 platform
- Enable hardware trace macro (HTM) hcall support
- Support for limited address mode capability
- Changes to RMA size from 512 MB to 768 MB to handle fadump
- Misc fixes and cleanups
Thanks to Abhishek Dubey, Amit Machhiwal, Andreas Schwab, Arnd Bergmann,
Athira Rajeev, Avnish Chouhan, Christophe Leroy, Disha Goel, Donet Tom,
Gaurav Batra, Gautam Menghani, Hari Bathini, Kajol Jain, Kees Cook,
Mahesh Salgaonkar, Michael Ellerman, Paul Mackerras, Ritesh Harjani
(IBM), Sathvika Vasireddy, Segher Boessenkool, Sourabh Jain, Vaibhav
Jain, and Venkat Rao Bagalkote.
* tag 'powerpc-6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (61 commits)
powerpc/kexec: fix physical address calculation in clear_utlb_entry()
crypto: powerpc: Mark ghashp8-ppc.o as an OBJECT_FILES_NON_STANDARD
powerpc: Fix 'intra_function_call not a direct call' warning
powerpc/perf: Fix ref-counting on the PMU 'vpa_pmu'
KVM: PPC: Enable CAP_SPAPR_TCE_VFIO on pSeries KVM guests
powerpc/prom_init: Fixup missing #size-cells on PowerBook6,7
powerpc/microwatt: Add SMP support
powerpc: Define config option for processors with broadcast TLBIE
powerpc/microwatt: Define an idle power-save function
powerpc/microwatt: Device-tree updates
powerpc/microwatt: Select COMMON_CLK in order to get the clock framework
net: toshiba: Remove reference to PPC_IBM_CELL_BLADE
net: spider_net: Remove powerpc Cell driver
cpufreq: ppc_cbe: Remove powerpc Cell driver
genirq: Remove IRQ_EDGE_EOI_HANDLER
docs: Remove reference to removed CBE_CPUFREQ_SPU_GOVERNOR
powerpc: Remove UDBG_RTAS_CONSOLE
powerpc/io: Use standard barrier macros in io.c
powerpc/io: Rename _insw_ns() etc.
powerpc/io: Use generic raw accessors
...
Implement "mdd-auto-reset-vf" priv-flag to handle Tx and Rx MDD events for VFs.
This flag is also used in other network adapters like ICE.
Usage:
- "on" - The problematic VF will be automatically reset
if a malformed descriptor is detected.
- "off" - The problematic VF will be disabled.
In cases where a VF sends malformed packets classified as malicious, it can
cause the Tx queue to freeze, rendering it unusable for several minutes. When
an MDD event occurs, this new implementation allows for a graceful VF reset to
quickly restore operational state.
Currently, VF queues are disabled if an MDD event occurs. This patch adds the
ability to reset the VF if a Tx or Rx MDD event occurs. It also includes MDD
event logging throttling to avoid dmesg pollution and unifies the format of
Tx and Rx MDD messages.
Note: Standard message rate limiting functions like dev_info_ratelimited()
do not meet our requirements. Custom rate limiting is implemented,
please see the code for details.
Co-developed-by: Jan Sokolowski <jan.sokolowski@intel.com>
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Co-developed-by: Padraig J Connolly <padraig.j.connolly@intel.com>
Signed-off-by: Padraig J Connolly <padraig.j.connolly@intel.com>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Michal Schmidt <mschmidt@redhat.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250106221929.956999-13-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add PCIe hardware statistics support to the fbnic driver. These stats
provide insight into PCIe transaction performance and error conditions.
Which includes, read/write and completion TLP counts and DWORD counts and
debug counters for tag, completion credit and NP credit exhaustion
The stats are exposed via debugfs and can be used to monitor PCIe
performance and debug PCIe issues.
Signed-off-by: Sanman Pradhan <sanman.p211993@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20241115015344.757567-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Adds documentation for creating and configuring rvu port representors
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for userspace to enable/disable the debug ports(ADB,MIPC).
- ADB port: /dev/wwan0adb0
- MIPC port: /dev/wwan0mipc0
Application can use ADB (Android Debug Bridge) port to implement
functions (shell, pull, push ...) by ADB protocol commands.
E.g., ADB commands:
- A_OPEN: OPEN(local-id, 0, "destination")
- A_WRTE: WRITE(local-id, remote-id, "data")
- A_OKEY: READY(local-id, remote-id, "")
- A_CLSE: CLOSE(local-id, remote-id, "")
Link: https://android.googlesource.com/platform/packages/modules/adb/+/refs/heads/main/README.md
Application can use MIPC (Modem Information Process Center) port
to debug antenna tuner or noise profiling through this MTK modem
diagnostic interface.
By default, debug ports are not exposed, so using the command
to enable or disable debug ports.
Enable debug ports:
- enable: 'echo 1 > /sys/bus/pci/devices/${bdf}/t7xx_debug_ports
Disable debug ports:
- disable: 'echo 0 > /sys/bus/pci/devices/${bdf}/t7xx_debug_ports
Signed-off-by: Jinjian Song <jinjian.song@fibocom.com>
Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
