Testing for reset is pointless since the reset can start right after the
test.
The same PASID can be used by more than one VMID, invalidate each of them.
Move the KIQ and all the workaround handling into common GMC code.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Testing for reset is pointless since the reset can start right after the
test. Grab the reset semaphore instead.
The same PASID can be used by more than once VMID, build a mask of VMIDs
to invalidate instead of just restting the first one.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Shashank Sharma <shashank.sharma@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Testing for reset is pointless since the reset can start right after the
test. Grab the reset semaphore instead.
The same PASID can be used by more than once VMID, build a mask of VMIDs
to invalidate instead of just restting the first one.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Shashank Sharma <shashank.sharma@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The amdgpu_ras_eeprom_control.bad_channel_bitmap is u32 type, but the
channel index could be larger than 32. For the ASICs whose channel
number is more than 32, the amdgpu_dpm_send_hbm_bad_channel_flag
interface is not supported, so we simply bypass channel bitmap update under
this condition.
v2: replace sizeof with BITS_PER_TYPE, we should check bit number
instead of byte number.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If retry cam enabled, we don't use sw retry fault filter and add fault
into sw filter ring, so we shouldn't remove fault from sw filter.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The KIQ code path was ignoring the second flush. Also avoid long lines and
re-calculating the register offsets over and over again.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On GFX v9.4.3 dGPU, applications have random timeout failure when XNACK
on, dmesg log has "amdgpu: IH soft ring buffer overflow 0x900, 0x900",
because dGPU mode has 272 cam entries. After increasing IH soft ring
to 512 entries, no more IH soft ring overflow message and application
passed.
Fixes: bf80d34b6c ("drm/amdgpu: Increase soft IH ring size")
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
update the query to return the number of functional
instances where there is more than an instance of the requested
type and for others continue to return one.
v2: count must reflect the actual number of engines (Alex)
v3: fix wrong number of engines for vcn (Alex)
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It should first check block ras obj whether be set, it should
return 0 directly if block ras obj or hw_ops is not set.
If block doesn't support RAS just return 0 is fine.
Changed from V1:
return 0 directly if block ras obj or hw ops is not set
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of storing coredump information inside amdgpu_device struct,
move if to a proper separated struct and allocate it dynamically. This
will make it easier to further expand the logged information.
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Reviewed-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch fixes a memory leak in the amdgpu_ras_feature_enable() function.
The leak occurs when the function sends a command to the firmware to enable
or disable a RAS feature for a GFX block. If the command fails, the kfree()
function is not called to free the info memory.
Fixes: 9f051d6ff1 ("drm/amdgpu: Free ras cmd input buffer properly")
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Cong Liu <liucong2@kylinos.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Search for vbios version string in STRING_OFFSET-ATOM_ROM_HEADER region
first. If those offsets are not populated, use the hardcoded region.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 7748ce5b69.
vbios_version sysfs node is used to identify Part Number also. Revert to
the same so that it doesn't break scripts/software which parse this.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Seamless boot can technically be supported as far back as DCN1
but to avoid regressions on older hardware, enable it for DCN3 and
later.
If users report using the module parameter that it works on older
ASICs as well, this can be adjusted.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
During jpeg init, CPU writes to frame buffer which can be cached by HDP,
occasionally causing invalid header to be sent to MMSCH. Perform HDP flush
after writing to frame buffer before continuing with jpeg init sequence.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timmy Tsai <timmtsai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
`amdgpu_gmc_get_vbios_allocations` has a special case for how to
bring up yellow carp when amdgpu discovery is turned off. As this ASIC
ships with discovery turned on, it's generally dead code and worse it
causes `adev->mman.keep_stolen_vga_memory` to not be initialized for
yellow carp.
Remove it.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Implement support for remapping the HDP aperture registers for
NBIO 7.11.
Reviewed-by: Lang Yu <lang.yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Implement support for setting up the VCN doorbell range for
NBIO 7.11.
Reviewed-by: Lang Yu <lang.yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On some APU systems, there is no atom context and so the
atom_context struct is null.
Add a check to the VBIOS_INFO branch of amdgpu_info_ioctl
to handle this case, returning all zeroes.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: David Francis <David.Francis@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Create a module option to disable soft recoveries on amdgpu, making
every recovery go through the device reset path. This option makes
easier to force device resets for testing and debugging purposes.
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Merge all developer debug options available as separated module
parameters in one, making it obvious that are for developers.
Drop the obsolete module options in favor of the new ones.
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rename KGD_MAX_QUEUES to AMDGPU_MAX_QUEUES to conform with
the naming convention followed in amdgpu_gfx.h. No functional
change.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When reset method is not passed in reset context, look for the handler
for default reset method. On Aldebaran, default reset method for SOCs
connected to CPU over XGMI is MODE2.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Tested-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently, we store CU info only for a single XCC assuming
that it is the same for all XCCs. However, that may not be
true. As a result, store CU info for all XCCs. This info is
later used for CU masking.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[1] Remove the irq flags setting code since pci_alloc_irq_vectors()
handles these flags.
[2] Free the msi vectors in case of error.
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch fixes the case where the code currently passes
absolute register address and not the reg offset, which HWS
expects, when sending the PM4 packet to set/update CWSR grace
period. Additionally, cleanup the signature of
build_grace_period_packet_info function as it no longer needs
the inst parameter.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Jonathan Kim <jonathan.kim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
