mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/herbert/cryptodev-2.6.git
synced 2026-04-18 03:23:53 -04:00
59cbe9436d
Add device tree bindings documentation for Samsung S5KJN1 image sensor. Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
104 lines
2.4 KiB
YAML
104 lines
2.4 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/media/i2c/samsung,s5kjn1.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Samsung S5KJN1 Image Sensor
|
|
|
|
description:
|
|
Samsung S5KJN1 (ISOCELL JN1) image sensor is a 50MP image sensor.
|
|
The sensor is controlled over a serial camera control bus protocol,
|
|
the widest supported output image frame size is 8160x6144 at 10 frames
|
|
per second, data output format is RAW10 transferred over 4-lane
|
|
MIPI D-PHY interface.
|
|
|
|
maintainers:
|
|
- Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
|
|
|
|
allOf:
|
|
- $ref: /schemas/media/video-interface-devices.yaml#
|
|
|
|
properties:
|
|
compatible:
|
|
const: samsung,s5kjn1
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
clocks:
|
|
description: MCLK supply clock.
|
|
maxItems: 1
|
|
|
|
reset-gpios:
|
|
description: Active low GPIO connected to RESET pad of the sensor.
|
|
maxItems: 1
|
|
|
|
afvdd-supply:
|
|
description: Autofocus actuator voltage supply, 2.8-3.0 volts.
|
|
|
|
vdda-supply:
|
|
description: Analogue voltage supply, 2.8 volts.
|
|
|
|
vddd-supply:
|
|
description: Digital core voltage supply, 1.05 volts.
|
|
|
|
vddio-supply:
|
|
description: Digital I/O voltage supply, 1.8 volts.
|
|
|
|
port:
|
|
$ref: /schemas/graph.yaml#/$defs/port-base
|
|
additionalProperties: false
|
|
|
|
properties:
|
|
endpoint:
|
|
$ref: /schemas/media/video-interfaces.yaml#
|
|
unevaluatedProperties: false
|
|
|
|
properties:
|
|
data-lanes:
|
|
items:
|
|
- const: 1
|
|
- const: 2
|
|
- const: 3
|
|
- const: 4
|
|
|
|
required:
|
|
- link-frequencies
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- port
|
|
|
|
unevaluatedProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
|
|
i2c {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
camera@56 {
|
|
compatible = "samsung,s5kjn1";
|
|
reg = <0x56>;
|
|
clocks = <&camera_mclk 0>;
|
|
assigned-clocks = <&camera_mclk 0>;
|
|
assigned-clock-rates = <24000000>;
|
|
reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
|
|
vdda-supply = <&vreg_2p8>;
|
|
vddd-supply = <&vreg_1p05>;
|
|
vddio-supply = <&vreg_1p8>;
|
|
|
|
port {
|
|
endpoint {
|
|
link-frequencies = /bits/ 64 <700000000>;
|
|
remote-endpoint = <&mipi_csi2_ep>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
...
|