mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/herbert/cryptodev-2.6.git
synced 2026-04-19 12:03:56 -04:00
66e3377c7c
The .txt binding explains:
"
The following optional properties only apply to
RGB and YUV input modes and
can be omitted for BT.656 input modes:
"
This constraint is not implmented in the DT Schema.
The original binding from the .txt file referenced
properties that is included in panel-timing.yaml.
The properties in question are:
- pixelclk-active
- de-active
- hsync-active
- vsync-active
These properties was dropped in the conversion as they are not relevant.
v2:
- drop properties from panel-timing (Linus)
- drop use of spi-slave.yaml (Maxime)
- introduce unevaluatedProperties (Maxime)
- dropped unused properties (Linus)
- delete stray spaces
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408195109.32692-8-sam@ravnborg.org
72 lines
1.5 KiB
YAML
72 lines
1.5 KiB
YAML
# SPDX-License-Identifier: GPL-2.0
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/display/panel/ilitek,ili9322.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Ilitek ILI9322 TFT panel driver with SPI control bus
|
|
|
|
maintainers:
|
|
- Linus Walleij <linus.walleij@linaro.org>
|
|
|
|
description: |
|
|
This is a driver for 320x240 TFT panels, accepting a variety of input
|
|
streams that get adapted and scaled to the panel. The panel output has
|
|
960 TFT source driver pins and 240 TFT gate driver pins, VCOM, VCOML and
|
|
VCOMH outputs.
|
|
|
|
The panel must obey the rules for a SPI slave device as specified in
|
|
spi/spi-controller.yaml
|
|
|
|
allOf:
|
|
- $ref: panel-common.yaml#
|
|
|
|
properties:
|
|
compatible:
|
|
items:
|
|
- enum:
|
|
- dlink,dir-685-panel
|
|
|
|
- const: ilitek,ili9322
|
|
|
|
reset-gpios: true
|
|
port: true
|
|
|
|
vcc-supply:
|
|
description: Core voltage supply
|
|
|
|
iovcc-supply:
|
|
description: Voltage supply for the interface input/output signals
|
|
|
|
vci-supply:
|
|
description: Voltage supply for analog parts
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
|
|
unevaluatedProperties: false
|
|
|
|
examples:
|
|
- |
|
|
spi {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
panel: display@0 {
|
|
compatible = "dlink,dir-685-panel", "ilitek,ili9322";
|
|
reg = <0>;
|
|
vcc-supply = <&vdisp>;
|
|
iovcc-supply = <&vdisp>;
|
|
vci-supply = <&vdisp>;
|
|
|
|
port {
|
|
panel_in: endpoint {
|
|
remote-endpoint = <&display_out>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
...
|