mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/herbert/cryptodev-2.6.git
synced 2026-04-18 03:23:53 -04:00
bf373e4c78
Pull devicetree updates from Rob Herring:
"DT Bindings:
- Convert all remaining interrupt-controller bindings to DT schema
- Convert Rockchip CDN-DP and Freescale TCON, M4IF, TigerP, LDB, PPC
PMC, imx-drm, and ftm-quaddec to DT schema
- Add bindings for fsl,vf610-pit, fsl,ls1021a-wdt, sgx,vz89te,
maxim,max30208, ti,lp8864, and fairphone,fp5-sndcard
- Add top-level constraints for renesas,vsp1 and renesas,fcp
- Add missing constraint in amlogic,pinctrl-a4 'group' nodes
- Adjust the allowed properties for dwc3-xilinx, sony,imx219,
pci-iommu, and renesas,dsi
- Add EcoNet vendor prefix
- Fix the reserved-memory.yaml in fsl,qman-fqd
- Drop obsolete numa.txt and cpu-topology.txt which are schemas in
dtschema now
- Drop Renesas RZ/N1S bindings
- Ensure Arm cpu nodes don't allow undocumented properties. Add all
the properties which are in use and undocumented. Drop the Mediatek
cpufreq binding which is not a binding, but just what DT properties
the driver uses.
- Add compatibles for Renesas RZ/G3E and RZ/V2N Mali Bifrost GPU
- Update documentation on defining child nodes with separate schemas
- Add bindings to PSCI MAINTAINERS entry
DT core:
- Add new functions to simplify driver handling of 'memory-region'
properties. Users to be added next cycle.
- Simplify of_dma_set_restricted_buffer() to use
of_for_each_phandle()
- Add missing unlock on error in unittest_data_add()"
* tag 'devicetree-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (87 commits)
dt-bindings: timer: Add fsl,vf610-pit.yaml
dt-bindings: gpu: mali-bifrost: Add compatible for RZ/G3E SoC
ASoC: dt-bindings: qcom,sm8250: Add Fairphone 5 sound card
dt-bindings: arm/cpus: Allow 2 power-domains entries
dt-bindings: usb: dwc3-xilinx: allow dma-coherent
media: dt-bindings: sony,imx219: Allow props from video-interface-devices
dt-bindings: soundwire: qcom: Document v2.1.0 version of IP block
dt-bindings: watchdog: fsl-imx-wdt: add compatible string fsl,ls1021a-wdt
dt-bindings: pinctrl: amlogic,pinctrl-a4: Add missing constraint on allowed 'group' node properties
dt-bindings: display: rockchip: Convert cdn-dp-rockchip.txt to yaml
dt-bindings: display: bridge: renesas,dsi: allow properties from dsi-controller
dt-bindings: trivial-devices: Add VZ89TE to trivial
media: dt-bindings: renesas,vsp1: add top-level constraints
media: dt-bindings: renesas,fcp: add top-level constraints
dt-bindings: trivial-devices: Add Maxim max30208
dt-bindings: soc: fsl,qman-fqd: Fix reserved-memory.yaml reference
dt-bindings: interrupt-controller: Convert ti,omap-intc-irq to DT schema
dt-bindings: interrupt-controller: Convert ti,omap4-wugen-mpu to DT schema
dt-bindings: interrupt-controller: Convert ti,keystone-irq to DT schema
dt-bindings: interrupt-controller: Convert technologic,ts4800-irqc to DT schema
...
113 lines
2.7 KiB
YAML
113 lines
2.7 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/media/i2c/sony,imx219.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Sony 1/4.0-Inch 8Mpixel CMOS Digital Image Sensor
|
|
|
|
maintainers:
|
|
- Dave Stevenson <dave.stevenson@raspberrypi.com>
|
|
|
|
description: |-
|
|
The Sony imx219 is a 1/4.0-inch CMOS active pixel digital image sensor
|
|
with an active array size of 3280H x 2464V. It is programmable through
|
|
I2C interface. The I2C address is fixed to 0x10 as per sensor data sheet.
|
|
Image data is sent through MIPI CSI-2, which is configured as either 2 or
|
|
4 data lanes.
|
|
|
|
allOf:
|
|
- $ref: /schemas/media/video-interface-devices.yaml#
|
|
|
|
properties:
|
|
compatible:
|
|
const: sony,imx219
|
|
|
|
reg:
|
|
description: I2C device address
|
|
maxItems: 1
|
|
|
|
clocks:
|
|
maxItems: 1
|
|
|
|
VDIG-supply:
|
|
description:
|
|
Digital I/O voltage supply, 1.8 volts
|
|
|
|
VANA-supply:
|
|
description:
|
|
Analog voltage supply, 2.8 volts
|
|
|
|
VDDL-supply:
|
|
description:
|
|
Digital core voltage supply, 1.2 volts
|
|
|
|
reset-gpios:
|
|
maxItems: 1
|
|
description: |-
|
|
Reference to the GPIO connected to the xclr pin, if any.
|
|
Must be released (set high) after all supplies are applied.
|
|
|
|
port:
|
|
$ref: /schemas/graph.yaml#/$defs/port-base
|
|
additionalProperties: false
|
|
|
|
properties:
|
|
endpoint:
|
|
$ref: /schemas/media/video-interfaces.yaml#
|
|
unevaluatedProperties: false
|
|
|
|
properties:
|
|
data-lanes:
|
|
description: |-
|
|
The sensor supports either two-lane, or four-lane operation.
|
|
If this property is omitted four-lane operation is assumed.
|
|
For two-lane operation the property must be set to <1 2>.
|
|
items:
|
|
- const: 1
|
|
- const: 2
|
|
|
|
clock-noncontinuous: true
|
|
link-frequencies: true
|
|
|
|
required:
|
|
- link-frequencies
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- clocks
|
|
- VANA-supply
|
|
- VDIG-supply
|
|
- VDDL-supply
|
|
- port
|
|
|
|
unevaluatedProperties: false
|
|
|
|
examples:
|
|
- |
|
|
i2c {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
imx219: sensor@10 {
|
|
compatible = "sony,imx219";
|
|
reg = <0x10>;
|
|
clocks = <&imx219_clk>;
|
|
VANA-supply = <&imx219_vana>; /* 2.8v */
|
|
VDIG-supply = <&imx219_vdig>; /* 1.8v */
|
|
VDDL-supply = <&imx219_vddl>; /* 1.2v */
|
|
|
|
port {
|
|
imx219_0: endpoint {
|
|
remote-endpoint = <&csi1_ep>;
|
|
data-lanes = <1 2>;
|
|
clock-noncontinuous;
|
|
link-frequencies = /bits/ 64 <456000000>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
...
|