mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/herbert/cryptodev-2.6.git
synced 2026-04-18 11:33:36 -04:00
a73ca0449b
sctp_vrf.sh could fail:
TEST 12: bind vrf-2 & 1 in server, connect from client 1 & 2, N [FAIL]
not ok 1 selftests: net: sctp_vrf.sh # exit=3
The failure happens when the server bind in a new run conflicts with an
existing association from the previous run:
[1] ip netns exec $SERVER_NS ./sctp_hello server ...
[2] ip netns exec $CLIENT_NS ./sctp_hello client ...
[3] ip netns exec $SERVER_NS pkill sctp_hello ...
[4] ip netns exec $SERVER_NS ./sctp_hello server ...
It occurs if the client in [2] sends a message and closes immediately.
With the message unacked, no SHUTDOWN is sent. Killing the server in [3]
triggers a SHUTDOWN the client also ignores due to the unacked message,
leaving the old association alive. This causes the bind at [4] to fail
until the message is acked and the client responds to a second SHUTDOWN
after the server’s T2 timer expires (3s).
This patch fixes the issue by preventing the client from sending data.
Instead, the client blocks on recv() and waits for the server to close.
It also waits until both the server and the client sockets are fully
released in stop_server and wait_client before restarting.
Additionally, replace 2>&1 >/dev/null with -q in sysctl and grep, and
drop other redundant 2>&1 >/dev/null redirections, and fix a typo from
N to Y (connect successfully) in the description of the last test.
Fixes: a61bd7b9fe ("selftests: add a selftest for sctp vrf")
Reported-by: Hangbin Liu <liuhangbin@gmail.com>
Tested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/be2dacf52d0917c4ba5e2e8c5a9cb640740ad2b6.1760731574.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
190 lines
5.7 KiB
Bash
Executable File
190 lines
5.7 KiB
Bash
Executable File
#!/bin/bash
|
|
# SPDX-License-Identifier: GPL-2.0
|
|
#
|
|
# Testing For SCTP VRF.
|
|
# TOPO: CLIENT_NS1 (veth1) <---> (veth1) -> vrf_s1
|
|
# SERVER_NS
|
|
# CLIENT_NS2 (veth1) <---> (veth2) -> vrf_s2
|
|
|
|
source lib.sh
|
|
CLIENT_IP4="10.0.0.1"
|
|
CLIENT_IP6="2000::1"
|
|
CLIENT_PORT=1234
|
|
|
|
SERVER_IP4="10.0.0.2"
|
|
SERVER_IP6="2000::2"
|
|
SERVER_PORT=1234
|
|
|
|
setup() {
|
|
modprobe sctp
|
|
modprobe sctp_diag
|
|
setup_ns CLIENT_NS1 CLIENT_NS2 SERVER_NS
|
|
|
|
ip net exec $CLIENT_NS1 sysctl -wq net.ipv6.conf.default.accept_dad=0
|
|
ip net exec $CLIENT_NS2 sysctl -wq net.ipv6.conf.default.accept_dad=0
|
|
ip net exec $SERVER_NS sysctl -wq net.ipv6.conf.default.accept_dad=0
|
|
|
|
ip -n $SERVER_NS link add veth1 type veth peer name veth1 netns $CLIENT_NS1
|
|
ip -n $SERVER_NS link add veth2 type veth peer name veth1 netns $CLIENT_NS2
|
|
|
|
ip -n $CLIENT_NS1 link set veth1 up
|
|
ip -n $CLIENT_NS1 addr add $CLIENT_IP4/24 dev veth1
|
|
ip -n $CLIENT_NS1 addr add $CLIENT_IP6/24 dev veth1
|
|
|
|
ip -n $CLIENT_NS2 link set veth1 up
|
|
ip -n $CLIENT_NS2 addr add $CLIENT_IP4/24 dev veth1
|
|
ip -n $CLIENT_NS2 addr add $CLIENT_IP6/24 dev veth1
|
|
|
|
ip -n $SERVER_NS link add dummy1 type dummy
|
|
ip -n $SERVER_NS link set dummy1 up
|
|
ip -n $SERVER_NS link add vrf-1 type vrf table 10
|
|
ip -n $SERVER_NS link add vrf-2 type vrf table 20
|
|
ip -n $SERVER_NS link set vrf-1 up
|
|
ip -n $SERVER_NS link set vrf-2 up
|
|
ip -n $SERVER_NS link set veth1 master vrf-1
|
|
ip -n $SERVER_NS link set veth2 master vrf-2
|
|
|
|
ip -n $SERVER_NS addr add $SERVER_IP4/24 dev dummy1
|
|
ip -n $SERVER_NS addr add $SERVER_IP4/24 dev veth1
|
|
ip -n $SERVER_NS addr add $SERVER_IP4/24 dev veth2
|
|
ip -n $SERVER_NS addr add $SERVER_IP6/24 dev dummy1
|
|
ip -n $SERVER_NS addr add $SERVER_IP6/24 dev veth1
|
|
ip -n $SERVER_NS addr add $SERVER_IP6/24 dev veth2
|
|
|
|
ip -n $SERVER_NS link set veth1 up
|
|
ip -n $SERVER_NS link set veth2 up
|
|
ip -n $SERVER_NS route add table 10 $CLIENT_IP4 dev veth1 src $SERVER_IP4
|
|
ip -n $SERVER_NS route add table 20 $CLIENT_IP4 dev veth2 src $SERVER_IP4
|
|
ip -n $SERVER_NS route add $CLIENT_IP4 dev veth1 src $SERVER_IP4
|
|
ip -n $SERVER_NS route add table 10 $CLIENT_IP6 dev veth1 src $SERVER_IP6
|
|
ip -n $SERVER_NS route add table 20 $CLIENT_IP6 dev veth2 src $SERVER_IP6
|
|
ip -n $SERVER_NS route add $CLIENT_IP6 dev veth1 src $SERVER_IP6
|
|
}
|
|
|
|
cleanup() {
|
|
wait_client $CLIENT_NS1
|
|
wait_client $CLIENT_NS2
|
|
stop_server
|
|
cleanup_ns $CLIENT_NS1 $CLIENT_NS2 $SERVER_NS
|
|
}
|
|
|
|
start_server() {
|
|
local IFACE=$1
|
|
local CNT=0
|
|
|
|
ip netns exec $SERVER_NS ./sctp_hello server $AF $SERVER_IP $SERVER_PORT $IFACE &
|
|
disown
|
|
until ip netns exec $SERVER_NS ss -SlH | grep -q "$IFACE"; do
|
|
[ $((CNT++)) -eq 30 ] && { RET=3; return $RET; }
|
|
sleep 0.1
|
|
done
|
|
}
|
|
|
|
stop_server() {
|
|
local CNT=0
|
|
|
|
ip netns exec $SERVER_NS pkill sctp_hello
|
|
while ip netns exec $SERVER_NS ss -SaH | grep -q .; do
|
|
[ $((CNT++)) -eq 30 ] && break
|
|
sleep 0.1
|
|
done
|
|
}
|
|
|
|
wait_client() {
|
|
local CLIENT_NS=$1
|
|
local CNT=0
|
|
|
|
while ip netns exec $CLIENT_NS ss -SaH | grep -q .; do
|
|
[ $((CNT++)) -eq 30 ] && break
|
|
sleep 0.1
|
|
done
|
|
}
|
|
|
|
do_test() {
|
|
local CLIENT_NS=$1
|
|
local IFACE=$2
|
|
|
|
start_server $IFACE || return $RET
|
|
timeout 3 ip netns exec $CLIENT_NS ./sctp_hello client $AF \
|
|
$SERVER_IP $SERVER_PORT $CLIENT_IP $CLIENT_PORT
|
|
RET=$?
|
|
wait_client $CLIENT_NS
|
|
stop_server
|
|
return $RET
|
|
}
|
|
|
|
do_testx() {
|
|
local IFACE1=$1
|
|
local IFACE2=$2
|
|
|
|
start_server $IFACE1 || return $RET
|
|
start_server $IFACE2 || return $RET
|
|
timeout 3 ip netns exec $CLIENT_NS1 ./sctp_hello client $AF \
|
|
$SERVER_IP $SERVER_PORT $CLIENT_IP $CLIENT_PORT && \
|
|
timeout 3 ip netns exec $CLIENT_NS2 ./sctp_hello client $AF \
|
|
$SERVER_IP $SERVER_PORT $CLIENT_IP $CLIENT_PORT
|
|
RET=$?
|
|
wait_client $CLIENT_NS1
|
|
wait_client $CLIENT_NS2
|
|
stop_server
|
|
return $RET
|
|
}
|
|
|
|
testup() {
|
|
ip netns exec $SERVER_NS sysctl -wq net.sctp.l3mdev_accept=1
|
|
echo -n "TEST 01: nobind, connect from client 1, l3mdev_accept=1, Y "
|
|
do_test $CLIENT_NS1 || { echo "[FAIL]"; return $RET; }
|
|
echo "[PASS]"
|
|
|
|
echo -n "TEST 02: nobind, connect from client 2, l3mdev_accept=1, N "
|
|
do_test $CLIENT_NS2 && { echo "[FAIL]"; return $RET; }
|
|
echo "[PASS]"
|
|
|
|
ip netns exec $SERVER_NS sysctl -wq net.sctp.l3mdev_accept=0
|
|
echo -n "TEST 03: nobind, connect from client 1, l3mdev_accept=0, N "
|
|
do_test $CLIENT_NS1 && { echo "[FAIL]"; return $RET; }
|
|
echo "[PASS]"
|
|
|
|
echo -n "TEST 04: nobind, connect from client 2, l3mdev_accept=0, N "
|
|
do_test $CLIENT_NS2 && { echo "[FAIL]"; return $RET; }
|
|
echo "[PASS]"
|
|
|
|
echo -n "TEST 05: bind veth2 in server, connect from client 1, N "
|
|
do_test $CLIENT_NS1 veth2 && { echo "[FAIL]"; return $RET; }
|
|
echo "[PASS]"
|
|
|
|
echo -n "TEST 06: bind veth1 in server, connect from client 1, Y "
|
|
do_test $CLIENT_NS1 veth1 || { echo "[FAIL]"; return $RET; }
|
|
echo "[PASS]"
|
|
|
|
echo -n "TEST 07: bind vrf-1 in server, connect from client 1, Y "
|
|
do_test $CLIENT_NS1 vrf-1 || { echo "[FAIL]"; return $RET; }
|
|
echo "[PASS]"
|
|
|
|
echo -n "TEST 08: bind vrf-2 in server, connect from client 1, N "
|
|
do_test $CLIENT_NS1 vrf-2 && { echo "[FAIL]"; return $RET; }
|
|
echo "[PASS]"
|
|
|
|
echo -n "TEST 09: bind vrf-2 in server, connect from client 2, Y "
|
|
do_test $CLIENT_NS2 vrf-2 || { echo "[FAIL]"; return $RET; }
|
|
echo "[PASS]"
|
|
|
|
echo -n "TEST 10: bind vrf-1 in server, connect from client 2, N "
|
|
do_test $CLIENT_NS2 vrf-1 && { echo "[FAIL]"; return $RET; }
|
|
echo "[PASS]"
|
|
|
|
echo -n "TEST 11: bind vrf-1 & 2 in server, connect from client 1 & 2, Y "
|
|
do_testx vrf-1 vrf-2 || { echo "[FAIL]"; return $RET; }
|
|
echo "[PASS]"
|
|
|
|
echo -n "TEST 12: bind vrf-2 & 1 in server, connect from client 1 & 2, Y "
|
|
do_testx vrf-2 vrf-1 || { echo "[FAIL]"; return $RET; }
|
|
echo "[PASS]"
|
|
}
|
|
|
|
trap cleanup EXIT
|
|
setup && echo "Testing For SCTP VRF:" && \
|
|
CLIENT_IP=$CLIENT_IP4 SERVER_IP=$SERVER_IP4 AF="-4" testup && echo "***v4 Tests Done***" &&
|
|
CLIENT_IP=$CLIENT_IP6 SERVER_IP=$SERVER_IP6 AF="-6" testup && echo "***v6 Tests Done***"
|
|
exit $?
|