mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/herbert/cryptodev-2.6.git
synced 2026-04-18 03:23:53 -04:00
aa1826696a
Usage of the clock-frequency property for camera sensors is discouraged in favour of using assigned-clock-rates (and assigned-clock-parents where needed). Mark the property as deprecated. Update the examples accordingly. In DT examples where the sensor input clock appears to come from a programmable clock generator, replace clock-frequency by the assigned-clocks and assigned-clock-rates properties. Otherwise, just drop clock-frequency. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
114 lines
2.4 KiB
YAML
114 lines
2.4 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/media/i2c/ovti,ov7251.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: OmniVision OV7251 Image Sensor
|
|
|
|
description:
|
|
The Omnivision OV7251 is a 1/7.5-Inch CMOS active pixel digital image sensor
|
|
with an active array size of 640H x 480V. It is programmable through a serial
|
|
I2C interface.
|
|
|
|
maintainers:
|
|
- Todor Tomov <todor.too@gmail.com>
|
|
|
|
properties:
|
|
compatible:
|
|
const: ovti,ov7251
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
clocks:
|
|
description: XCLK Input Clock
|
|
|
|
clock-names:
|
|
const: xclk
|
|
|
|
clock-frequency:
|
|
description: Frequency of the xclk clock in Hz.
|
|
deprecated: true
|
|
|
|
vdda-supply:
|
|
description: Analog voltage supply, 2.8 volts
|
|
|
|
vddd-supply:
|
|
description: Digital core voltage supply, 1.2 volts
|
|
|
|
vdddo-supply:
|
|
description: Digital I/O voltage supply, 1.8 volts
|
|
|
|
enable-gpios:
|
|
maxItems: 1
|
|
description:
|
|
Reference to the GPIO connected to the XSHUTDOWN pin, if any. Polarity
|
|
is GPIO_ACTIVE_HIGH.
|
|
|
|
port:
|
|
description: Digital Output Port
|
|
$ref: /schemas/graph.yaml#/$defs/port-base
|
|
additionalProperties: false
|
|
|
|
properties:
|
|
endpoint:
|
|
$ref: /schemas/media/video-interfaces.yaml#
|
|
unevaluatedProperties: false
|
|
|
|
properties:
|
|
clock-lanes:
|
|
maximum: 1
|
|
|
|
data-lanes:
|
|
maxItems: 1
|
|
|
|
link-frequencies: true
|
|
|
|
required:
|
|
- data-lanes
|
|
- link-frequencies
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- clocks
|
|
- vdddo-supply
|
|
- vdda-supply
|
|
- port
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
|
|
i2c {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
camera@3c {
|
|
compatible = "ovti,ov7251";
|
|
reg = <0x3c>;
|
|
|
|
clocks = <&clks 1>;
|
|
assigned-clocks = <&clks 1>;
|
|
assigned-clock-rates = <24000000>;
|
|
|
|
vdddo-supply = <&ov7251_vdddo_1v8>;
|
|
vdda-supply = <&ov7251_vdda_2v8>;
|
|
vddd-supply = <&ov7251_vddd_1v5>;
|
|
enable-gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>;
|
|
|
|
port {
|
|
ov7251_ep: endpoint {
|
|
remote-endpoint = <&csi0_ep>;
|
|
clock-lanes = <1>;
|
|
data-lanes = <0>;
|
|
link-frequencies = /bits/ 64 <240000000 319200000>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
...
|