mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/herbert/cryptodev-2.6.git
synced 2026-04-18 03:23:53 -04:00
f5ef3f722d
The timepulse pin is an output that can be used to generate a pulse at a
(configurable) frequency (i.e. it is not an input).
Fixes: dba529605f ("dt-bindings: gnss: Rewrite common bindings in YAML")
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
50 lines
1.3 KiB
YAML
50 lines
1.3 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/gnss/gnss-common.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Common Properties for Global Navigation Satellite Systems (GNSS)
|
|
receiver devices
|
|
|
|
maintainers:
|
|
- Johan Hovold <johan@kernel.org>
|
|
|
|
description: |
|
|
This document defines device tree properties common to Global Navigation
|
|
Satellite System receivers.
|
|
|
|
properties:
|
|
$nodename:
|
|
pattern: "^gnss(@.*)?$"
|
|
|
|
lna-supply:
|
|
description: A separate regulator supplying power for the Low Noise
|
|
Amplifier (LNA). This is an amplifier connected between the GNSS
|
|
device and the receiver antenna.
|
|
|
|
enable-gpios:
|
|
description: A GPIO line that will enable the GNSS receiver when
|
|
asserted. If this line is active low, the GPIO phandle should
|
|
consequently be tagged with the GPIO_ACTIVE_LOW flag so the operating
|
|
system can rely on asserting the line to enable the GNSS device.
|
|
maxItems: 1
|
|
|
|
timepulse-gpios:
|
|
description: Timepulse signal
|
|
maxItems: 1
|
|
|
|
additionalProperties: true
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
serial {
|
|
gnss {
|
|
compatible = "u-blox,neo-8";
|
|
vcc-supply = <&gnss_reg>;
|
|
timepulse-gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
|
|
current-speed = <4800>;
|
|
};
|
|
};
|