mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/herbert/cryptodev-2.6.git
synced 2026-04-20 04:23:55 -04:00
7d165f6451
Update the binding with eight more SPMI PMIC compatibles found in the PMIC info list in the Qualcomm socinfo driver and add the two PM660 related PMICs supported by the SPMI PMIC driver but are missing from the document. Then remove the duplicate entry for pma8084. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20211017161218.2378176-3-bjorn.andersson@linaro.org
94 lines
3.3 KiB
Plaintext
94 lines
3.3 KiB
Plaintext
Qualcomm SPMI PMICs multi-function device bindings
|
|
|
|
The Qualcomm SPMI series presently includes PM8941, PM8841 and PMA8084
|
|
PMICs. These PMICs use a QPNP scheme through SPMI interface.
|
|
QPNP is effectively a partitioning scheme for dividing the SPMI extended
|
|
register space up into logical pieces, and set of fixed register
|
|
locations/definitions within these regions, with some of these regions
|
|
specifically used for interrupt handling.
|
|
|
|
The QPNP PMICs are used with the Qualcomm Snapdragon series SoCs, and are
|
|
interfaced to the chip via the SPMI (System Power Management Interface) bus.
|
|
Support for multiple independent functions are implemented by splitting the
|
|
16-bit SPMI slave address space into 256 smaller fixed-size regions, 256 bytes
|
|
each. A function can consume one or more of these fixed-size register regions.
|
|
|
|
Required properties:
|
|
- compatible: Should contain one of:
|
|
"qcom,pm660",
|
|
"qcom,pm660l",
|
|
"qcom,pm7325",
|
|
"qcom,pm8004",
|
|
"qcom,pm8005",
|
|
"qcom,pm8019",
|
|
"qcom,pm8028",
|
|
"qcom,pm8110",
|
|
"qcom,pm8150",
|
|
"qcom,pm8150b",
|
|
"qcom,pm8150c",
|
|
"qcom,pm8150l",
|
|
"qcom,pm8226",
|
|
"qcom,pm8350c",
|
|
"qcom,pm8841",
|
|
"qcom,pm8901",
|
|
"qcom,pm8909",
|
|
"qcom,pm8916",
|
|
"qcom,pm8941",
|
|
"qcom,pm8950",
|
|
"qcom,pm8994",
|
|
"qcom,pm8998",
|
|
"qcom,pma8084",
|
|
"qcom,pmd9635",
|
|
"qcom,pmi8950",
|
|
"qcom,pmi8962",
|
|
"qcom,pmi8994",
|
|
"qcom,pmi8998",
|
|
"qcom,pmk8002",
|
|
"qcom,pmk8350",
|
|
"qcom,pmr735a",
|
|
"qcom,smb2351",
|
|
or generalized "qcom,spmi-pmic".
|
|
- reg: Specifies the SPMI USID slave address for this device.
|
|
For more information see:
|
|
Documentation/devicetree/bindings/spmi/spmi.yaml
|
|
|
|
Required properties for peripheral child nodes:
|
|
- compatible: Should contain "qcom,xxx", where "xxx" is a peripheral name.
|
|
|
|
Optional properties for peripheral child nodes:
|
|
- interrupts: Interrupts are specified as a 4-tuple. For more information
|
|
see:
|
|
Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt
|
|
- interrupt-names: Corresponding interrupt name to the interrupts property
|
|
|
|
Each child node of SPMI slave id represents a function of the PMIC. In the
|
|
example below the rtc device node represents a peripheral of pm8941
|
|
SID = 0. The regulator device node represents a peripheral of pm8941 SID = 1.
|
|
|
|
Example:
|
|
|
|
spmi {
|
|
compatible = "qcom,spmi-pmic-arb";
|
|
|
|
pm8941@0 {
|
|
compatible = "qcom,pm8941", "qcom,spmi-pmic";
|
|
reg = <0x0 SPMI_USID>;
|
|
|
|
rtc {
|
|
compatible = "qcom,rtc";
|
|
interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
|
|
interrupt-names = "alarm";
|
|
};
|
|
};
|
|
|
|
pm8941@1 {
|
|
compatible = "qcom,pm8941", "qcom,spmi-pmic";
|
|
reg = <0x1 SPMI_USID>;
|
|
|
|
regulator {
|
|
compatible = "qcom,regulator";
|
|
regulator-name = "8941_boost";
|
|
};
|
|
};
|
|
};
|