Commit 06777c8f authored by Hao Zhang's avatar Hao Zhang Committed by Felix Fietkau
Browse files

wifi: mt76: mt7921e: add LED control support



Introduce wifi LED switch control, add flow to Control a wifi
gpio pin based on the status of WIFI radio, if the pin is connected
to an LED, the LED will indicate the status of the WiFi radio.

Signed-off-by: default avatarHao Zhang <hao.zhang@mediatek.com>
Co-developed-by: default avatarQuan Zhou <quan.zhou@mediatek.com>
Signed-off-by: default avatarQuan Zhou <quan.zhou@mediatek.com>
Acked-by: default avatarLorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: default avatarFelix Fietkau <nbd@nbd.name>
parent 2706c5c7
Loading
Loading
Loading
Loading
+1 −0
Original line number Diff line number Diff line
@@ -1190,6 +1190,7 @@ enum {
	MCU_EXT_CMD_EFUSE_ACCESS = 0x01,
	MCU_EXT_CMD_RF_REG_ACCESS = 0x02,
	MCU_EXT_CMD_RF_TEST = 0x04,
	MCU_EXT_CMD_ID_RADIO_ON_OFF_CTRL = 0x05,
	MCU_EXT_CMD_PM_STATE_CTRL = 0x07,
	MCU_EXT_CMD_CHANNEL_SWITCH = 0x08,
	MCU_EXT_CMD_SET_TX_POWER_CTRL = 0x11,
+26 −1
Original line number Diff line number Diff line
@@ -242,6 +242,15 @@ int __mt7921_start(struct mt792x_phy *phy)

	ieee80211_queue_delayed_work(mphy->hw, &mphy->mac_work,
				     MT792x_WATCHDOG_TIME);
	if (mt76_is_mmio(mphy->dev)) {
		err = mt7921_mcu_radio_led_ctrl(phy->dev, EXT_CMD_RADIO_LED_CTRL_ENABLE);
		if (err)
			return err;

		err = mt7921_mcu_radio_led_ctrl(phy->dev, EXT_CMD_RADIO_ON_LED);
		if (err)
			return err;
	}

	return 0;
}
@@ -259,6 +268,22 @@ static int mt7921_start(struct ieee80211_hw *hw)
	return err;
}

static void mt7921_stop(struct ieee80211_hw *hw)
{
	struct mt792x_dev *dev = mt792x_hw_dev(hw);
	int err = 0;

	if (mt76_is_mmio(&dev->mt76)) {
		mt792x_mutex_acquire(dev);
		err = mt7921_mcu_radio_led_ctrl(dev, EXT_CMD_RADIO_OFF_LED);
		mt792x_mutex_release(dev);
		if (err)
			return;
	}

	mt792x_stop(hw);
}

static int
mt7921_add_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
{
@@ -1377,7 +1402,7 @@ static void mt7921_mgd_complete_tx(struct ieee80211_hw *hw,
const struct ieee80211_ops mt7921_ops = {
	.tx = mt792x_tx,
	.start = mt7921_start,
	.stop = mt792x_stop,
	.stop = mt7921_stop,
	.add_interface = mt7921_add_interface,
	.remove_interface = mt792x_remove_interface,
	.config = mt7921_config,
+14 −0
Original line number Diff line number Diff line
@@ -646,6 +646,20 @@ int mt7921_run_firmware(struct mt792x_dev *dev)
}
EXPORT_SYMBOL_GPL(mt7921_run_firmware);

int mt7921_mcu_radio_led_ctrl(struct mt792x_dev *dev, u8 value)
{
	struct {
		u8 ctrlid;
		u8 rsv[3];
	} __packed req = {
		.ctrlid = value,
	};

	return mt76_mcu_send_msg(&dev->mt76, MCU_EXT_CMD(ID_RADIO_ON_OFF_CTRL),
				&req, sizeof(req), false);
}
EXPORT_SYMBOL_GPL(mt7921_mcu_radio_led_ctrl);

int mt7921_mcu_set_tx(struct mt792x_dev *dev, struct ieee80211_vif *vif)
{
	struct mt792x_vif *mvif = (struct mt792x_vif *)vif->drv_priv;
+5 −0
Original line number Diff line number Diff line
@@ -27,6 +27,10 @@
#define MCU_UNI_EVENT_ROC  0x27
#define MCU_UNI_EVENT_CLC  0x80

#define EXT_CMD_RADIO_LED_CTRL_ENABLE   0x1
#define EXT_CMD_RADIO_ON_LED            0x2
#define EXT_CMD_RADIO_OFF_LED           0x3

enum {
	UNI_ROC_ACQUIRE,
	UNI_ROC_ABORT,
@@ -196,6 +200,7 @@ int mt7921_mcu_fw_log_2_host(struct mt792x_dev *dev, u8 ctrl);
void mt7921_mcu_rx_event(struct mt792x_dev *dev, struct sk_buff *skb);
int mt7921_mcu_set_rxfilter(struct mt792x_dev *dev, u32 fif,
			    u8 bit_op, u32 bit_map);
int mt7921_mcu_radio_led_ctrl(struct mt792x_dev *dev, u8 value);

static inline u32
mt7921_reg_map_l1(struct mt792x_dev *dev, u32 addr)
+7 −1
Original line number Diff line number Diff line
@@ -427,6 +427,10 @@ static int mt7921_pci_suspend(struct device *device)
	wait_event_timeout(dev->wait,
			   !dev->regd_in_progress, 5 * HZ);

	err = mt7921_mcu_radio_led_ctrl(dev, EXT_CMD_RADIO_OFF_LED);
	if (err < 0)
		goto restore_suspend;

	err = mt76_connac_mcu_set_hif_suspend(mdev, true);
	if (err)
		goto restore_suspend;
@@ -525,9 +529,11 @@ static int mt7921_pci_resume(struct device *device)
		mt76_connac_mcu_set_deep_sleep(&dev->mt76, false);

	err = mt76_connac_mcu_set_hif_suspend(mdev, false);
	if (err < 0)
		goto failed;

	mt7921_regd_update(dev);

	err = mt7921_mcu_radio_led_ctrl(dev, EXT_CMD_RADIO_ON_LED);
failed:
	pm->suspended = false;