Commit 0d925626 authored by Mauro Carvalho Chehab's avatar Mauro Carvalho Chehab Committed by Guenter Roeck
Browse files

docs: hwmon: k8temp, w83793: convert to ReST format 



Convert k8temp and w83793 to ReST format, in order to allow them
to be parsed by Sphinx.

Signed-off-by: default avatarMauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: default avatarGuenter Roeck <linux@roeck-us.net>
parent 08fae079

Documentation/hwmon/k8temp

+12 −5
Original line number Diff line number Diff line
@@ -2,12 +2,17 @@ Kernel driver k8temp 
====================



Supported chips:



  * AMD Athlon64/FX or Opteron CPUs



    Prefix: 'k8temp'



    Addresses scanned: PCI space



    Datasheet: http://support.amd.com/us/Processor_TechDocs/32559.pdf



Author: Rudolf Marek



Contact: Rudolf Marek <r.marek@assembler.cz>



Description
@@ -27,10 +32,12 @@ implemented sensors. 


Mapping of /sys files is as follows:



temp1_input - temperature of Core 0 and "place" 0

temp2_input - temperature of Core 0 and "place" 1

temp3_input - temperature of Core 1 and "place" 0

temp4_input - temperature of Core 1 and "place" 1

============= ===================================

temp1_input   temperature of Core 0 and "place" 0

temp2_input   temperature of Core 0 and "place" 1

temp3_input   temperature of Core 1 and "place" 0

temp4_input   temperature of Core 1 and "place" 1

============= ===================================



Temperatures are measured in degrees Celsius and measurement resolution is

1 degree C. It is expected that future CPU will have better resolution. The

Documentation/hwmon/w83793

+68 −61
Original line number Diff line number Diff line
@@ -2,14 +2,18 @@ Kernel driver w83793 
====================



Supported chips:



  * Winbond W83793G/W83793R



    Prefix: 'w83793'



    Addresses scanned: I2C 0x2c - 0x2f



    Datasheet: Still not published



Authors:

    Yuan Mu (Winbond Electronics)

    Rudolf Marek <r.marek@assembler.cz>

    - Yuan Mu (Winbond Electronics)

    - Rudolf Marek <r.marek@assembler.cz>





Module parameters
@@ -17,12 +21,13 @@ Module parameters 


* reset int

    (default 0)



    This parameter is not recommended, it will lose motherboard specific

    settings. Use 'reset=1' to reset the chip when loading this module.



* force_subclients=bus,caddr,saddr1,saddr2

    This is used to force the i2c addresses for subclients of

  a certain chip. Typical usage is `force_subclients=0,0x2f,0x4a,0x4b'

    a certain chip. Typical usage is `force_subclients=0,0x2f,0x4a,0x4b`

    to force the subclients of chip 0x2f on bus 0 to i2c addresses

    0x4a and 0x4b.
@@ -47,10 +52,12 @@ This driver implements support for Winbond W83793G/W83793R chips. 
* Temperature sensor types

    Temp1-4 have 2 possible types. It can be read from (and written to)

    temp[1-4]_type.



    - If the value is 3, it starts monitoring using a remote termal diode

      (default).

    - If the value is 6, it starts monitoring using the temperature sensor

      in Intel CPU and get result by PECI.



    Temp5-6 can be connected to external thermistors (value of

    temp[5-6]_type is 4).