Commit 15be4f7c authored by Rob Herring (Arm)'s avatar Rob Herring (Arm)
Browse files

dt-bindings: Drop unnecessary quotes on keys 



The yamllint quoted-strings check wasn't checking keys for quotes, but
support for checking keys was added in 1.34 release. Fix all the errors
found when enabling the check.

Clean-up the xilinx-versal-cpm formatting while we're here.

Acked-by: default avatarMark Brown <broonie@kernel.org>
Reviewed-by: default avatarKrzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: default avatarThierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20240426202239.2837516-1-robh@kernel.org


Signed-off-by: default avatarRob Herring (Arm) <robh@kernel.org>
parent 27db7526

Documentation/devicetree/bindings/net/sff,sfp.yaml

+6 −6
Original line number Diff line number Diff line
@@ -29,39 +29,39 @@ properties: 
      allowable by a module in the slot, in milli-Watts. Presently, modules can

      be up to 1W, 1.5W or 2W.



  "mod-def0-gpios":

  mod-def0-gpios:

    maxItems: 1

    description:

      GPIO phandle and a specifier of the MOD-DEF0 (AKA Mod_ABS) module

      presence input gpio signal, active (module absent) high. Must not be

      present for SFF modules



  "los-gpios":

  los-gpios:

    maxItems: 1

    description:

      GPIO phandle and a specifier of the Receiver Loss of Signal Indication

      input gpio signal, active (signal lost) high



  "tx-fault-gpios":

  tx-fault-gpios:

    maxItems: 1

    description:

      GPIO phandle and a specifier of the Module Transmitter Fault input gpio

      signal, active (fault condition) high



  "tx-disable-gpios":

  tx-disable-gpios:

    maxItems: 1

    description:

      GPIO phandle and a specifier of the Transmitter Disable output gpio

      signal, active (Tx disable) high



  "rate-select0-gpios":

  rate-select0-gpios:

    maxItems: 1

    description:

      GPIO phandle and a specifier of the Rx Signaling Rate Select (AKA RS0)

      output gpio signal, low - low Rx rate, high - high Rx rate Must not be

      present for SFF modules



  "rate-select1-gpios":

  rate-select1-gpios:

    maxItems: 1

    description:

      GPIO phandle and a specifier of the Tx Signaling Rate Select (AKA RS1)

Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml

+5 −2
Original line number Diff line number Diff line
@@ -48,13 +48,16 @@ properties: 
  interrupt-controller:

    description: Interrupt controller node for handling legacy PCI interrupts.

    type: object

    additionalProperties: false



    properties:

      "#address-cells":

        const: 0



      "#interrupt-cells":

        const: 1

      "interrupt-controller": true

    additionalProperties: false



      interrupt-controller: true



required:

  - reg

Documentation/devicetree/bindings/pci/xlnx,nwl-pcie.yaml

+1 −1
Original line number Diff line number Diff line
@@ -84,7 +84,7 @@ properties: 
      "#interrupt-cells":

        const: 1



      "interrupt-controller": true

      interrupt-controller: true



    required:

      - "#address-cells"

Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml

+4 −4
Original line number Diff line number Diff line
@@ -59,14 +59,14 @@ patternProperties: 
      "#phy-cells":

        const: 0



      "brcm,enable-ssc":

      brcm,enable-ssc:

        $ref: /schemas/types.yaml#/definitions/flag

        description: |

          Use spread spectrum clocking (SSC) on this port

          This property is not applicable for "brcm,iproc-ns2-sata-phy",

          "brcm,iproc-nsp-sata-phy" and "brcm,iproc-sr-sata-phy".



      "brcm,rxaeq-mode":

      brcm,rxaeq-mode:

        $ref: /schemas/types.yaml#/definitions/string

        description:

          String that indicates the desired RX equalizer mode.
@@ -75,7 +75,7 @@ patternProperties: 
          - auto

          - manual



      "brcm,rxaeq-value":

      brcm,rxaeq-value:

        $ref: /schemas/types.yaml#/definitions/uint32

        description: |

            When 'brcm,rxaeq-mode' is set to "manual", provides the RX
@@ -83,7 +83,7 @@ patternProperties: 
        minimum: 0

        maximum: 63



      "brcm,tx-amplitude-millivolt":

      brcm,tx-amplitude-millivolt:

        description: |

            Transmit amplitude voltage in millivolt.

        $ref: /schemas/types.yaml#/definitions/uint32

Documentation/devicetree/bindings/regulator/ti,tps62864.yaml

+1 −1
Original line number Diff line number Diff line
@@ -24,7 +24,7 @@ properties: 
    type: object



    properties:

      "SW":

      SW:

        type: object

        $ref: regulator.yaml#

        unevaluatedProperties: false