media: remove the old videobuf framework

    v4l2-subdev

    v4l2-event

    v4l2-controls

    v4l2-videobuf

    v4l2-videobuf2

    v4l2-dv-timings

    v4l2-flash-led-class

Of course, you can always do all the locking yourself by leaving both lock

pointers at ``NULL``.

If you use the old :ref:`videobuf framework <vb_framework>` then you must

pass the :c:type:`video_device`->lock to the videobuf queue initialize

function: if videobuf has to wait for a frame to arrive, then it will

temporarily unlock the lock and relock it afterwards. If your driver also

waits in the code, then you should do the same to allow other

processes to access the device node while the first process is waiting for

something.

In the case of :ref:`videobuf2 <vb2_framework>` you will need to implement the

``wait_prepare()`` and ``wait_finish()`` callbacks to unlock/lock if applicable.

If you use the ``queue->lock`` pointer, then you can use the helper functions

.. SPDX-License-Identifier: GPL-2.0

.. _vb_framework:

Videobuf Framework

==================

Author: Jonathan Corbet <corbet@lwn.net>

Current as of 2.6.33

.. note::

   The videobuf framework was deprecated in favor of videobuf2. Shouldn't

   be used on new drivers.

Introduction

------------

The videobuf layer functions as a sort of glue layer between a V4L2 driver

and user space.  It handles the allocation and management of buffers for

the storage of video frames.  There is a set of functions which can be used

to implement many of the standard POSIX I/O system calls, including read(),

poll(), and, happily, mmap().  Another set of functions can be used to

implement the bulk of the V4L2 ioctl() calls related to streaming I/O,

including buffer allocation, queueing and dequeueing, and streaming

control.  Using videobuf imposes a few design decisions on the driver

author, but the payback comes in the form of reduced code in the driver and

a consistent implementation of the V4L2 user-space API.

Buffer types

------------

Not all video devices use the same kind of buffers.  In fact, there are (at

least) three common variations:

 - Buffers which are scattered in both the physical and (kernel) virtual

   address spaces.  (Almost) all user-space buffers are like this, but it

   makes great sense to allocate kernel-space buffers this way as well when

   it is possible.  Unfortunately, it is not always possible; working with

   this kind of buffer normally requires hardware which can do

   scatter/gather DMA operations.

 - Buffers which are physically scattered, but which are virtually

   contiguous; buffers allocated with vmalloc(), in other words.  These

   buffers are just as hard to use for DMA operations, but they can be

   useful in situations where DMA is not available but virtually-contiguous

   buffers are convenient.

 - Buffers which are physically contiguous.  Allocation of this kind of

   buffer can be unreliable on fragmented systems, but simpler DMA

   controllers cannot deal with anything else.

Videobuf can work with all three types of buffers, but the driver author

must pick one at the outset and design the driver around that decision.

[It's worth noting that there's a fourth kind of buffer: "overlay" buffers

which are located within the system's video memory.  The overlay

functionality is considered to be deprecated for most use, but it still

shows up occasionally in system-on-chip drivers where the performance

benefits merit the use of this technique.  Overlay buffers can be handled

as a form of scattered buffer, but there are very few implementations in

the kernel and a description of this technique is currently beyond the

scope of this document.]

Data structures, callbacks, and initialization

----------------------------------------------

Depending on which type of buffers are being used, the driver should

include one of the following files:

.. code-block:: none

    <media/videobuf-dma-sg.h>		/* Physically scattered */

    <media/videobuf-vmalloc.h>		/* vmalloc() buffers	*/

    <media/videobuf-dma-contig.h>	/* Physically contiguous */

The driver's data structure describing a V4L2 device should include a

struct videobuf_queue instance for the management of the buffer queue,

along with a list_head for the queue of available buffers.  There will also

need to be an interrupt-safe spinlock which is used to protect (at least)

the queue.

The next step is to write four simple callbacks to help videobuf deal with

the management of buffers:

.. code-block:: none

    struct videobuf_queue_ops {

	int (*buf_setup)(struct videobuf_queue *q,

			 unsigned int *count, unsigned int *size);

	int (*buf_prepare)(struct videobuf_queue *q,

			   struct videobuf_buffer *vb,

			   enum v4l2_field field);

	void (*buf_queue)(struct videobuf_queue *q,

			  struct videobuf_buffer *vb);

	void (*buf_release)(struct videobuf_queue *q,

			    struct videobuf_buffer *vb);

    };

buf_setup() is called early in the I/O process, when streaming is being

initiated; its purpose is to tell videobuf about the I/O stream.  The count

parameter will be a suggested number of buffers to use; the driver should

check it for rationality and adjust it if need be.  As a practical rule, a

minimum of two buffers are needed for proper streaming, and there is

usually a maximum (which cannot exceed 32) which makes sense for each

device.  The size parameter should be set to the expected (maximum) size

for each frame of data.

Each buffer (in the form of a struct videobuf_buffer pointer) will be

passed to buf_prepare(), which should set the buffer's size, width, height,

and field fields properly.  If the buffer's state field is

VIDEOBUF_NEEDS_INIT, the driver should pass it to:

.. code-block:: none

    int videobuf_iolock(struct videobuf_queue* q, struct videobuf_buffer *vb,

			struct v4l2_framebuffer *fbuf);

Among other things, this call will usually allocate memory for the buffer.

Finally, the buf_prepare() function should set the buffer's state to

VIDEOBUF_PREPARED.

When a buffer is queued for I/O, it is passed to buf_queue(), which should

put it onto the driver's list of available buffers and set its state to

VIDEOBUF_QUEUED.  Note that this function is called with the queue spinlock

held; if it tries to acquire it as well things will come to a screeching

halt.  Yes, this is the voice of experience.  Note also that videobuf may

wait on the first buffer in the queue; placing other buffers in front of it

could again gum up the works.  So use list_add_tail() to enqueue buffers.

Finally, buf_release() is called when a buffer is no longer intended to be

used.  The driver should ensure that there is no I/O active on the buffer,

then pass it to the appropriate free routine(s):

.. code-block:: none

    /* Scatter/gather drivers */

    int videobuf_dma_unmap(struct videobuf_queue *q,

			   struct videobuf_dmabuf *dma);

    int videobuf_dma_free(struct videobuf_dmabuf *dma);

    /* vmalloc drivers */

    void videobuf_vmalloc_free (struct videobuf_buffer *buf);

    /* Contiguous drivers */

    void videobuf_dma_contig_free(struct videobuf_queue *q,

				  struct videobuf_buffer *buf);

One way to ensure that a buffer is no longer under I/O is to pass it to:

.. code-block:: none

    int videobuf_waiton(struct videobuf_buffer *vb, int non_blocking, int intr);

Here, vb is the buffer, non_blocking indicates whether non-blocking I/O

should be used (it should be zero in the buf_release() case), and intr

controls whether an interruptible wait is used.

File operations

---------------

At this point, much of the work is done; much of the rest is slipping

videobuf calls into the implementation of the other driver callbacks.  The

first step is in the open() function, which must initialize the

videobuf queue.  The function to use depends on the type of buffer used:

.. code-block:: none

    void videobuf_queue_sg_init(struct videobuf_queue *q,

				struct videobuf_queue_ops *ops,

				struct device *dev,

				spinlock_t *irqlock,

				enum v4l2_buf_type type,

				enum v4l2_field field,

				unsigned int msize,

				void *priv);

    void videobuf_queue_vmalloc_init(struct videobuf_queue *q,

				struct videobuf_queue_ops *ops,

				struct device *dev,

				spinlock_t *irqlock,

				enum v4l2_buf_type type,

				enum v4l2_field field,

				unsigned int msize,

				void *priv);

    void videobuf_queue_dma_contig_init(struct videobuf_queue *q,

				       struct videobuf_queue_ops *ops,

				       struct device *dev,

				       spinlock_t *irqlock,

				       enum v4l2_buf_type type,

				       enum v4l2_field field,

				       unsigned int msize,

				       void *priv);

In each case, the parameters are the same: q is the queue structure for the

device, ops is the set of callbacks as described above, dev is the device

structure for this video device, irqlock is an interrupt-safe spinlock to

protect access to the data structures, type is the buffer type used by the

device (cameras will use V4L2_BUF_TYPE_VIDEO_CAPTURE, for example), field

describes which field is being captured (often V4L2_FIELD_NONE for

progressive devices), msize is the size of any containing structure used

around struct videobuf_buffer, and priv is a private data pointer which

shows up in the priv_data field of struct videobuf_queue.  Note that these

are void functions which, evidently, are immune to failure.

V4L2 capture drivers can be written to support either of two APIs: the

read() system call and the rather more complicated streaming mechanism.  As

a general rule, it is necessary to support both to ensure that all

applications have a chance of working with the device.  Videobuf makes it

easy to do that with the same code.  To implement read(), the driver need

only make a call to one of:

.. code-block:: none

    ssize_t videobuf_read_one(struct videobuf_queue *q,

			      char __user *data, size_t count,

			      loff_t *ppos, int nonblocking);

    ssize_t videobuf_read_stream(struct videobuf_queue *q,

				 char __user *data, size_t count,

				 loff_t *ppos, int vbihack, int nonblocking);

Either one of these functions will read frame data into data, returning the

amount actually read; the difference is that videobuf_read_one() will only

read a single frame, while videobuf_read_stream() will read multiple frames

if they are needed to satisfy the count requested by the application.  A

typical driver read() implementation will start the capture engine, call

one of the above functions, then stop the engine before returning (though a

smarter implementation might leave the engine running for a little while in

anticipation of another read() call happening in the near future).

The poll() function can usually be implemented with a direct call to:

.. code-block:: none

    unsigned int videobuf_poll_stream(struct file *file,

				      struct videobuf_queue *q,

				      poll_table *wait);

Note that the actual wait queue eventually used will be the one associated

with the first available buffer.

When streaming I/O is done to kernel-space buffers, the driver must support

the mmap() system call to enable user space to access the data.  In many

V4L2 drivers, the often-complex mmap() implementation simplifies to a

single call to:

.. code-block:: none

    int videobuf_mmap_mapper(struct videobuf_queue *q,

			     struct vm_area_struct *vma);

Everything else is handled by the videobuf code.

The release() function requires two separate videobuf calls:

.. code-block:: none

    void videobuf_stop(struct videobuf_queue *q);

    int videobuf_mmap_free(struct videobuf_queue *q);

The call to videobuf_stop() terminates any I/O in progress - though it is

still up to the driver to stop the capture engine.  The call to

videobuf_mmap_free() will ensure that all buffers have been unmapped; if

so, they will all be passed to the buf_release() callback.  If buffers

remain mapped, videobuf_mmap_free() returns an error code instead.  The

purpose is clearly to cause the closing of the file descriptor to fail if

buffers are still mapped, but every driver in the 2.6.32 kernel cheerfully

ignores its return value.

ioctl() operations

------------------

The V4L2 API includes a very long list of driver callbacks to respond to

the many ioctl() commands made available to user space.  A number of these

- those associated with streaming I/O - turn almost directly into videobuf

calls.  The relevant helper functions are:

.. code-block:: none

    int videobuf_reqbufs(struct videobuf_queue *q,

			 struct v4l2_requestbuffers *req);

    int videobuf_querybuf(struct videobuf_queue *q, struct v4l2_buffer *b);

    int videobuf_qbuf(struct videobuf_queue *q, struct v4l2_buffer *b);

    int videobuf_dqbuf(struct videobuf_queue *q, struct v4l2_buffer *b,

		       int nonblocking);

    int videobuf_streamon(struct videobuf_queue *q);

    int videobuf_streamoff(struct videobuf_queue *q);

So, for example, a VIDIOC_REQBUFS call turns into a call to the driver's

vidioc_reqbufs() callback which, in turn, usually only needs to locate the

proper struct videobuf_queue pointer and pass it to videobuf_reqbufs().

These support functions can replace a great deal of buffer management

boilerplate in a lot of V4L2 drivers.

The vidioc_streamon() and vidioc_streamoff() functions will be a bit more

complex, of course, since they will also need to deal with starting and

stopping the capture engine.

Buffer allocation

-----------------

Thus far, we have talked about buffers, but have not looked at how they are

allocated.  The scatter/gather case is the most complex on this front.  For

allocation, the driver can leave buffer allocation entirely up to the

videobuf layer; in this case, buffers will be allocated as anonymous

user-space pages and will be very scattered indeed.  If the application is

using user-space buffers, no allocation is needed; the videobuf layer will

take care of calling get_user_pages() and filling in the scatterlist array.

If the driver needs to do its own memory allocation, it should be done in

the vidioc_reqbufs() function, *after* calling videobuf_reqbufs().  The

first step is a call to:

.. code-block:: none

    struct videobuf_dmabuf *videobuf_to_dma(struct videobuf_buffer *buf);

The returned videobuf_dmabuf structure (defined in

<media/videobuf-dma-sg.h>) includes a couple of relevant fields:

.. code-block:: none

    struct scatterlist  *sglist;

    int                 sglen;

The driver must allocate an appropriately-sized scatterlist array and

populate it with pointers to the pieces of the allocated buffer; sglen

should be set to the length of the array.

Drivers using the vmalloc() method need not (and cannot) concern themselves

with buffer allocation at all; videobuf will handle those details.  The

same is normally true of contiguous-DMA drivers as well; videobuf will

allocate the buffers (with dma_alloc_coherent()) when it sees fit.  That

means that these drivers may be trying to do high-order allocations at any

time, an operation which is not always guaranteed to work.  Some drivers

play tricks by allocating DMA space at system boot time; videobuf does not

currently play well with those drivers.

As of 2.6.31, contiguous-DMA drivers can work with a user-supplied buffer,

as long as that buffer is physically contiguous.  Normal user-space

allocations will not meet that criterion, but buffers obtained from other

kernel drivers, or those contained within huge pages, will work with these

drivers.

Filling the buffers

-------------------

The final part of a videobuf implementation has no direct callback - it's

the portion of the code which actually puts frame data into the buffers,

usually in response to interrupts from the device.  For all types of

drivers, this process works approximately as follows:

 - Obtain the next available buffer and make sure that somebody is actually

   waiting for it.

 - Get a pointer to the memory and put video data there.

 - Mark the buffer as done and wake up the process waiting for it.

Step (1) above is done by looking at the driver-managed list_head structure

- the one which is filled in the buf_queue() callback.  Because starting

the engine and enqueueing buffers are done in separate steps, it's possible

for the engine to be running without any buffers available - in the

vmalloc() case especially.  So the driver should be prepared for the list

to be empty.  It is equally possible that nobody is yet interested in the

buffer; the driver should not remove it from the list or fill it until a

process is waiting on it.  That test can be done by examining the buffer's

done field (a wait_queue_head_t structure) with waitqueue_active().

A buffer's state should be set to VIDEOBUF_ACTIVE before being mapped for

DMA; that ensures that the videobuf layer will not try to do anything with

it while the device is transferring data.

For scatter/gather drivers, the needed memory pointers will be found in the

scatterlist structure described above.  Drivers using the vmalloc() method

can get a memory pointer with:

.. code-block:: none

    void *videobuf_to_vmalloc(struct videobuf_buffer *buf);

For contiguous DMA drivers, the function to use is:

.. code-block:: none

    dma_addr_t videobuf_to_dma_contig(struct videobuf_buffer *buf);

The contiguous DMA API goes out of its way to hide the kernel-space address

of the DMA buffer from drivers.

The final step is to set the size field of the relevant videobuf_buffer

structure to the actual size of the captured image, set state to

VIDEOBUF_DONE, then call wake_up() on the done queue.  At this point, the

buffer is owned by the videobuf layer and the driver should not touch it

again.

Developers who are interested in more information can go into the relevant

header files; there are a few low-level functions declared there which have

not been talked about here.  Note also that all of these calls are exported

GPL-only, so they will not be available to non-GPL kernel modules.

此功能，而非访问 video_device::num 和 video_device::minor 域。

视频缓冲辅助函数

---------------

v4l2 核心 API 提供了一个处理视频缓冲的标准方法(称为“videobuf”)。

这些方法使驱动可以通过统一的方式实现 read()、mmap() 和 overlay()。

目前在设备上支持视频缓冲的方法有分散/聚集 DMA(videobuf-dma-sg)、

线性 DMA(videobuf-dma-contig)以及大多用于 USB 设备的用 vmalloc

分配的缓冲(videobuf-vmalloc)。

请参阅 Documentation/driver-api/media/v4l2-videobuf.rst，以获得更多关于 videobuf

层的使用信息。

v4l2_fh 结构体

-------------

	depends on I2C

	select REGMAP_I2C

	select V4L2_CCI

# Used by drivers that need Videobuf modules

config VIDEOBUF_GEN

	tristate

config VIDEOBUF_DMA_SG

	tristate

	select VIDEOBUF_GEN

config VIDEOBUF_VMALLOC

	tristate

	select VIDEOBUF_GEN

config VIDEOBUF_DMA_CONTIG

	tristate

	select VIDEOBUF_GEN