Commit 33c79865 authored by Vladimir Oltean's avatar Vladimir Oltean Committed by Vinod Koul
Browse files

dt-bindings: phy-common-props: create a reusable "protocol-names" definition 



Other properties also need to be defined per protocol than just
tx-p2p-microvolt-names. Create a common definition to avoid copying a 55
line property.

Signed-off-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: default avatarRob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260111093940.975359-3-vladimir.oltean@nxp.com


Signed-off-by: default avatarVinod Koul <vkoul@kernel.org>
parent b7b4dcd9

Documentation/devicetree/bindings/phy/phy-common-props.yaml

+19 −15
Original line number Diff line number Diff line
@@ -13,22 +13,12 @@ description: 
maintainers:

  - Marek Behún <kabel@kernel.org>



properties:

  tx-p2p-microvolt:

$defs:

  protocol-names:

    description:

      Transmit amplitude voltages in microvolts, peak-to-peak. If this property

      contains multiple values for various PHY modes, the

      'tx-p2p-microvolt-names' property must be provided and contain

      corresponding mode names.



  tx-p2p-microvolt-names:

    description: |

      Names of the modes corresponding to voltages in the 'tx-p2p-microvolt'

      property. Required only if multiple voltages are provided.



      If a value of 'default' is provided, the system should use it for any PHY

      mode that is otherwise not defined here. If 'default' is not provided, the

      system should use manufacturer default value.

      Names of the PHY modes. If a value of 'default' is provided, the system

      should use it for any PHY mode that is otherwise not defined here. If

      'default' is not provided, the system should use manufacturer default value.

    minItems: 1

    maxItems: 16

    items:
@@ -89,6 +79,20 @@ properties: 
        - mipi-dphy-univ

        - mipi-dphy-v2.5-univ



properties:

  tx-p2p-microvolt:

    description:

      Transmit amplitude voltages in microvolts, peak-to-peak. If this property

      contains multiple values for various PHY modes, the

      'tx-p2p-microvolt-names' property must be provided and contain

      corresponding mode names.



  tx-p2p-microvolt-names:

    description:

      Names of the modes corresponding to voltages in the 'tx-p2p-microvolt'

      property. Required only if multiple voltages are provided.

    $ref: "#/$defs/protocol-names"



dependencies:

  tx-p2p-microvolt-names: [ tx-p2p-microvolt ]