Commit 44c09201 authored by Matt LaPlante's avatar Matt LaPlante Committed by Adrian Bunk
Browse files

more misc typo fixes 



Signed-off-by: default avatarAdrian Bunk <bunk@stusta.de>
parent 09509603

arch/cris/arch-v10/drivers/Kconfig

+2 −2
Original line number Diff line number Diff line
@@ -550,7 +550,7 @@ config ETRAX_IDE 
	select BLK_DEV_IDEDMA

	help

	  Enable this to get support for ATA/IDE.

	  You can't use paralell ports or SCSI ports

	  You can't use parallel ports or SCSI ports

	  at the same time.
@@ -744,7 +744,7 @@ config ETRAX_PA_CHANGEABLE_BITS 
	default "FF"

	help

	  This is a bitmask with information of what bits in PA that a user

	  can change change the value on using ioctl's.

	  can change the value on using ioctl's.

	  Bit set = changeable.

	  You probably want 00 here.

arch/cris/arch-v32/Kconfig

+1 −1
Original line number Diff line number Diff line
@@ -162,7 +162,7 @@ config ETRAX_SDRAM_GRP1_CONFIG 
	depends on ETRAX_ARCH_V32

	default "0"

	help

	  SDRAM configuration for group 1. The defult value is 0

	  SDRAM configuration for group 1. The default value is 0

	  because group 1 is not used in the default configuration,

	  described in the help for SDRAM_GRP0_CONFIG.

arch/m68knommu/Kconfig

+2 −2
Original line number Diff line number Diff line
@@ -161,8 +161,8 @@ config CLOCK_FREQ 
	  frequency, it may or may not be the same as the external clock

	  crystal fitted to your board. Some processors have an internal

	  PLL and can have their frequency programmed at run time, others

	  use internal dividers. In gernal the kernel won't setup a PLL

	  if it is fitted (there are some expections). This value will be

	  use internal dividers. In general the kernel won't setup a PLL

	  if it is fitted (there are some exceptions). This value will be

	  specific to the exact CPU that you are using.



config CLOCK_DIV

arch/um/Kconfig

+1 −1
Original line number Diff line number Diff line
@@ -257,7 +257,7 @@ config UML_REAL_TIME_CLOCK 
	UML and spend long times with UML stopped at a breakpoint.  In this

	case, when UML is restarted, it will call the timer enough times to make

	up for the time spent at the breakpoint.  This could result in a

	noticable lag.  If this is a problem, then disable this option.

	noticeable lag.  If this is a problem, then disable this option.



endmenu

arch/x86_64/Kconfig

+1 −1
Original line number Diff line number Diff line
@@ -310,7 +310,7 @@ config K8_NUMA 
       help

	 Enable K8 NUMA node topology detection.  You should say Y here if

	 you have a multi processor AMD K8 system. This uses an old

	 method to read the NUMA configurtion directly from the builtin

	 method to read the NUMA configuration directly from the builtin

	 Northbridge of Opteron. It is recommended to use X86_64_ACPI_NUMA

	 instead, which also takes priority if both are compiled in.