Commit 4a4fcd61 authored by Guenter Roeck's avatar Guenter Roeck
Browse files

hwmon: (ina238) Pre-calculate current, power, and energy LSB 



Current, power, and energy LSB do not change during runtime, so we can
pre-calculate the respective values. The power LSB can be derived from
the current LSB using the equation in the datasheets. Similar, the
energy LSB can be derived from the power LSB.

Also add support for chips with built-in shunt resistor by providing
a chip specific configuration parameter for the current LSB. The
relationship of current -> power -> energy LSB values in those chips
is the same as in chips with external shunt resistor, so configuration
parameters for power and energy LSB are not needed.

Use ROUND_CLOSEST functions instead of divide operations to reduce
rounding errors.

Reviewed-by: default avatarChris Packham <chris.packham@alliedtelesis.co.nz>
Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz> # INA780
Signed-off-by: default avatarGuenter Roeck <linux@roeck-us.net>
parent 40a5da1e

drivers/hwmon/ina238.c

+27 −20
Original line number Diff line number Diff line
@@ -118,9 +118,10 @@ struct ina238_config { 
	bool has_power_highest;		/* chip detection power peak */

	bool has_energy;		/* chip detection energy */

	u8 temp_resolution;		/* temperature register resolution in bit */

	u32 power_calculate_factor;	/* fixed parameters for power calculate */

	u32 power_calculate_factor;	/* fixed parameter for power calculation, from datasheet */

	u16 config_default;		/* Power-on default state */

	int bus_voltage_lsb;		/* use for temperature calculate, uV/lsb */

	int current_lsb;		/* current LSB, in uA */

};



struct ina238_data {
@@ -130,6 +131,9 @@ struct ina238_data { 
	struct regmap *regmap;

	u32 rshunt;

	int gain;

	int current_lsb;		/* current LSB, in uA */

	int power_lsb;			/* power LSB, in uW */

	int energy_lsb;			/* energy LSB, in uJ */

};



static const struct ina238_config ina238_config[] = {
@@ -422,9 +426,8 @@ static int ina238_read_current(struct device *dev, u32 attr, long *val) 
			regval = (s16)regval;

		}



		/* Signed register, fixed 1mA current lsb. result in mA */

		*val = div_s64((s64)regval * INA238_FIXED_SHUNT * data->gain,

			       data->rshunt * 4);

		/* Signed register. Result in mA */

		*val = DIV_S64_ROUND_CLOSEST((s64)regval * data->current_lsb, 1000);



		/* Account for 4 bit offset */

		if (data->config->has_20bit_voltage_current)
@@ -450,9 +453,7 @@ static int ina238_read_power(struct device *dev, u32 attr, long *val) 
		if (err)

			return err;



		/* Fixed 1mA lsb, scaled by 1000000 to have result in uW */

		power = div_u64(regval * 1000ULL * INA238_FIXED_SHUNT * data->gain *

				data->config->power_calculate_factor, 4 * 100 * data->rshunt);

		power = (long long)regval * data->power_lsb;

		/* Clamp value to maximum value of long */

		*val = clamp_val(power, 0, LONG_MAX);

		break;
@@ -461,9 +462,7 @@ static int ina238_read_power(struct device *dev, u32 attr, long *val) 
		if (err)

			return err;



		/* Fixed 1mA lsb, scaled by 1000000 to have result in uW */

		power = div_u64(regval * 1000ULL * INA238_FIXED_SHUNT * data->gain *

				data->config->power_calculate_factor, 4 * 100 * data->rshunt);

		power = (long long)regval * data->power_lsb;

		/* Clamp value to maximum value of long */

		*val = clamp_val(power, 0, LONG_MAX);

		break;
@@ -476,8 +475,7 @@ static int ina238_read_power(struct device *dev, u32 attr, long *val) 
		 * Truncated 24-bit compare register, lower 8-bits are

		 * truncated. Same conversion to/from uW as POWER register.

		 */

		power = div_u64((regval << 8) * 1000ULL * INA238_FIXED_SHUNT * data->gain *

				data->config->power_calculate_factor, 4 * 100 * data->rshunt);

		power = ((long long)regval << 8) * data->power_lsb;

		/* Clamp value to maximum value of long */

		*val = clamp_val(power, 0, LONG_MAX);

		break;
@@ -498,7 +496,6 @@ static int ina238_read_power(struct device *dev, u32 attr, long *val) 
static int ina238_write_power_max(struct device *dev, long val)

{

	struct ina238_data *data = dev_get_drvdata(dev);

	long regval;



	/*

	 * Unsigned postive values. Compared against the 24-bit power register,
@@ -506,12 +503,11 @@ static int ina238_write_power_max(struct device *dev, long val) 
	 * register.

	 * The first clamp_val() is to establish a baseline to avoid overflows.

	 */

	regval = clamp_val(val, 0, LONG_MAX / 2);

	regval = div_u64(regval * 4 * 100 * data->rshunt, data->config->power_calculate_factor *

			1000ULL * INA238_FIXED_SHUNT * data->gain);

	regval = clamp_val(regval >> 8, 0, U16_MAX);

	val = clamp_val(val, 0, LONG_MAX / 2);

	val = DIV_ROUND_CLOSEST(val, data->power_lsb);

	val = clamp_val(val >> 8, 0, U16_MAX);



	return regmap_write(data->regmap, INA238_POWER_LIMIT, regval);

	return regmap_write(data->regmap, INA238_POWER_LIMIT, val);

}



static int ina238_temp_from_reg(s16 regval, u8 resolution)
@@ -584,8 +580,7 @@ static ssize_t energy1_input_show(struct device *dev, 
		return ret;



	/* result in uJ */

	energy = div_u64(regval * INA238_FIXED_SHUNT * data->gain * 16 * 10 *

			 data->config->power_calculate_factor, 4 * data->rshunt);

	energy = regval * data->energy_lsb;



	return sysfs_emit(buf, "%llu\n", energy);

}
@@ -817,6 +812,18 @@ static int ina238_probe(struct i2c_client *client) 
		return -ENODEV;

	}



	if (data->config->current_lsb)

		data->current_lsb = data->config->current_lsb;

	else

		data->current_lsb = DIV_U64_ROUND_CLOSEST(250ULL * INA238_FIXED_SHUNT * data->gain,

							  data->rshunt);



	data->power_lsb = DIV_ROUND_CLOSEST(data->current_lsb *

					    data->config->power_calculate_factor,

					    100);



	data->energy_lsb = data->power_lsb * 16;



	hwmon_dev = devm_hwmon_device_register_with_info(dev, client->name, data,

							 &ina238_chip_info,

							 data->config->has_energy ?