Commit 4ae2c678 authored by David S. Miller's avatar David S. Miller
Browse files

Merge branch 'phy-microchip-ksz-9897-errata'

Enguerrand de Ribaucourt says:

====================
Handle new Microchip KSZ 9897 Errata

These patches implement some suggested workarounds from the Microchip KSZ 9897
Errata [1].

[1] https://ww1.microchip.com/downloads/aemDocuments/documents/UNG/ProductDocuments/Errata/KSZ9897R-Errata-DS80000758.pdf

---
v7:
 - use dev_crit_once instead of dev_crit_ratelimited
 - add a comment to help users understand the consequences of half-duplex errors
v6: https://lore.kernel.org/netdev/20240614094642.122464-1-enguerrand.de-ribaucourt@savoirfairelinux.com/
 - remove KSZ9897 phy_id workaround (was a configuration issue)
 - use macros for checking link down in monitoring function
 - check if VLAN is enabled before monitoring resources
v5: https://lore.kernel.org/all/20240604092304.314636-1-enguerrand.de-ribaucourt@savoirfairelinux.com/
 - use macros for bitfields
 - rewrap comments
 - check ksz_pread* return values
 - fix spelling mistakes
 - remove KSZ9477 suspend/resume deletion patch
v4: https://lore.kernel.org/all/20240531142430.678198-1-enguerrand.de-ribaucourt@savoirfairelinux.com/
 - Rebase on net/main
 - Add Fixes: tags to the patches
 - reverse x-mas tree order
 - use pseudo phy_id instead of match_phy_device
v3: https://lore.kernel.org/all/20240530102436.226189-1-enguerrand.de-ribaucourt@savoirfairelinux.com/


====================

Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parents 42354e3c bf1bff11
Loading
Loading
Loading
Loading
+55 −0
Original line number Diff line number Diff line
@@ -427,6 +427,57 @@ void ksz9477_freeze_mib(struct ksz_device *dev, int port, bool freeze)
	mutex_unlock(&p->mib.cnt_mutex);
}

int ksz9477_errata_monitor(struct ksz_device *dev, int port,
			   u64 tx_late_col)
{
	u32 pmavbc;
	u8 status;
	u16 pqm;
	int ret;

	ret = ksz_pread8(dev, port, REG_PORT_STATUS_0, &status);
	if (ret)
		return ret;
	if (!(FIELD_GET(PORT_INTF_SPEED_MASK, status) == PORT_INTF_SPEED_NONE) &&
	    !(status & PORT_INTF_FULL_DUPLEX)) {
		/* Errata DS80000754 recommends monitoring potential faults in
		 * half-duplex mode. The switch might not be able to communicate anymore
		 * in these states.
		 * If you see this message, please read the errata-sheet for more information:
		 * https://ww1.microchip.com/downloads/aemDocuments/documents/UNG/ProductDocuments/Errata/KSZ9477S-Errata-DS80000754.pdf
		 * To workaround this issue, half-duplex mode should be avoided.
		 * A software reset could be implemented to recover from this state.
		 */
		dev_warn_once(dev->dev,
			      "Half-duplex detected on port %d, transmission halt may occur\n",
			      port);
		if (tx_late_col != 0) {
			/* Transmission halt with late collisions */
			dev_crit_once(dev->dev,
				      "TX late collisions detected, transmission may be halted on port %d\n",
				      port);
		}
		ret = ksz_read8(dev, REG_SW_LUE_CTRL_0, &status);
		if (ret)
			return ret;
		if (status & SW_VLAN_ENABLE) {
			ret = ksz_pread16(dev, port, REG_PORT_QM_TX_CNT_0__4, &pqm);
			if (ret)
				return ret;
			ret = ksz_read32(dev, REG_PMAVBC, &pmavbc);
			if (ret)
				return ret;
			if ((FIELD_GET(PMAVBC_MASK, pmavbc) <= PMAVBC_MIN) ||
			    (FIELD_GET(PORT_QM_TX_CNT_M, pqm) >= PORT_QM_TX_CNT_MAX)) {
				/* Transmission halt with Half-Duplex and VLAN */
				dev_crit_once(dev->dev,
					      "resources out of limits, transmission may be halted\n");
			}
		}
	}
	return ret;
}

void ksz9477_port_init_cnt(struct ksz_device *dev, int port)
{
	struct ksz_port_mib *mib = &dev->ports[port].mib;
@@ -1297,6 +1348,10 @@ int ksz9477_setup(struct dsa_switch *ds)
	/* Enable REG_SW_MTU__2 reg by setting SW_JUMBO_PACKET */
	ksz_cfg(dev, REG_SW_MAC_CTRL_1, SW_JUMBO_PACKET, true);

	/* Use collision based back pressure mode. */
	ksz_cfg(dev, REG_SW_MAC_CTRL_1, SW_BACK_PRESSURE,
		SW_BACK_PRESSURE_COLLISION);

	/* Now we can configure default MTU value */
	ret = regmap_update_bits(ksz_regmap_16(dev), REG_SW_MTU__2, REG_SW_MTU_MASK,
				 VLAN_ETH_FRAME_LEN + ETH_FCS_LEN);
+2 −0
Original line number Diff line number Diff line
@@ -36,6 +36,8 @@ int ksz9477_port_mirror_add(struct ksz_device *dev, int port,
			    bool ingress, struct netlink_ext_ack *extack);
void ksz9477_port_mirror_del(struct ksz_device *dev, int port,
			     struct dsa_mall_mirror_tc_entry *mirror);
int ksz9477_errata_monitor(struct ksz_device *dev, int port,
			   u64 tx_late_col);
void ksz9477_get_caps(struct ksz_device *dev, int port,
		      struct phylink_config *config);
int ksz9477_fdb_dump(struct ksz_device *dev, int port,
+9 −2
Original line number Diff line number Diff line
@@ -247,6 +247,7 @@
#define REG_SW_MAC_CTRL_1		0x0331

#define SW_BACK_PRESSURE		BIT(5)
#define SW_BACK_PRESSURE_COLLISION	0
#define FAIR_FLOW_CTRL			BIT(4)
#define NO_EXC_COLLISION_DROP		BIT(3)
#define SW_JUMBO_PACKET			BIT(2)
@@ -842,8 +843,8 @@

#define REG_PORT_STATUS_0		0x0030

#define PORT_INTF_SPEED_M		0x3
#define PORT_INTF_SPEED_S		3
#define PORT_INTF_SPEED_MASK		GENMASK(4, 3)
#define PORT_INTF_SPEED_NONE		GENMASK(1, 0)
#define PORT_INTF_FULL_DUPLEX		BIT(2)
#define PORT_TX_FLOW_CTRL		BIT(1)
#define PORT_RX_FLOW_CTRL		BIT(0)
@@ -1167,6 +1168,11 @@
#define PORT_RMII_CLK_SEL		BIT(7)
#define PORT_MII_SEL_EDGE		BIT(5)

#define REG_PMAVBC			0x03AC

#define PMAVBC_MASK			GENMASK(26, 16)
#define PMAVBC_MIN			0x580

/* 4 - MAC */
#define REG_PORT_MAC_CTRL_0		0x0400

@@ -1494,6 +1500,7 @@

#define PORT_QM_TX_CNT_USED_S		0
#define PORT_QM_TX_CNT_M		(BIT(11) - 1)
#define PORT_QM_TX_CNT_MAX		0x200

#define REG_PORT_QM_TX_CNT_1__4		0x0A14

+11 −0
Original line number Diff line number Diff line
@@ -1382,6 +1382,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
		.tc_cbs_supported = true,
		.ops = &ksz9477_dev_ops,
		.phylink_mac_ops = &ksz9477_phylink_mac_ops,
		.phy_errata_9477 = true,
		.mib_names = ksz9477_mib_names,
		.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
		.reg_mib_cnt = MIB_COUNTER_NUM,
@@ -1416,6 +1417,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
		.num_ipms = 8,
		.ops = &ksz9477_dev_ops,
		.phylink_mac_ops = &ksz9477_phylink_mac_ops,
		.phy_errata_9477 = true,
		.mib_names = ksz9477_mib_names,
		.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
		.reg_mib_cnt = MIB_COUNTER_NUM,
@@ -1450,6 +1452,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
		.num_ipms = 8,
		.ops = &ksz9477_dev_ops,
		.phylink_mac_ops = &ksz9477_phylink_mac_ops,
		.phy_errata_9477 = true,
		.mib_names = ksz9477_mib_names,
		.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
		.reg_mib_cnt = MIB_COUNTER_NUM,
@@ -1540,6 +1543,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
		.tc_cbs_supported = true,
		.ops = &ksz9477_dev_ops,
		.phylink_mac_ops = &ksz9477_phylink_mac_ops,
		.phy_errata_9477 = true,
		.mib_names = ksz9477_mib_names,
		.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
		.reg_mib_cnt = MIB_COUNTER_NUM,
@@ -1820,6 +1824,7 @@ void ksz_r_mib_stats64(struct ksz_device *dev, int port)
	struct rtnl_link_stats64 *stats;
	struct ksz_stats_raw *raw;
	struct ksz_port_mib *mib;
	int ret;

	mib = &dev->ports[port].mib;
	stats = &mib->stats64;
@@ -1861,6 +1866,12 @@ void ksz_r_mib_stats64(struct ksz_device *dev, int port)
	pstats->rx_pause_frames = raw->rx_pause;

	spin_unlock(&mib->stats64_lock);

	if (dev->info->phy_errata_9477) {
		ret = ksz9477_errata_monitor(dev, port, raw->tx_late_col);
		if (ret)
			dev_err(dev->dev, "Failed to monitor transmission halt\n");
	}
}

void ksz88xx_r_mib_stats64(struct ksz_device *dev, int port)
+1 −0
Original line number Diff line number Diff line
@@ -66,6 +66,7 @@ struct ksz_chip_data {
	bool tc_cbs_supported;
	const struct ksz_dev_ops *ops;
	const struct phylink_mac_ops *phylink_mac_ops;
	bool phy_errata_9477;
	bool ksz87xx_eee_link_erratum;
	const struct ksz_mib_names *mib_names;
	int mib_cnt;
Loading