Commit 4d52b48b authored by Stephen Hemminger's avatar Stephen Hemminger Committed by Jeff Garzik
Browse files

[PATCH] sky2: support msi interrupt (revised) 



This hardware supports Message Signaled interrupts.
When setting up, use software interrupt to check for bad hardware.

Signed-off-by: Stephen Hemminger <shemminger @osdl.org>
Signed-off-by: default avatarJeff Garzik <jgarzik@pobox.com>
parent db992c97

drivers/net/sky2.c

+77 −0
Original line number Diff line number Diff line
@@ -101,6 +101,10 @@ static int copybreak __read_mostly = 256; 
module_param(copybreak, int, 0);

MODULE_PARM_DESC(copybreak, "Receive copy threshold");



static int disable_msi = 0;

module_param(disable_msi, int, 0);

MODULE_PARM_DESC(disable_msi, "Disable Message Signaled Interrupt (MSI)");



static const struct pci_device_id sky2_id_table[] = {

	{ PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9000) },

	{ PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9E00) },
@@ -3064,6 +3068,61 @@ static void __devinit sky2_show_addr(struct net_device *dev) 
		       dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5]);

}



/* Handle software interrupt used during MSI test */

static irqreturn_t __devinit sky2_test_intr(int irq, void *dev_id,

					    struct pt_regs *regs)

{

	struct sky2_hw *hw = dev_id;

	u32 status = sky2_read32(hw, B0_Y2_SP_ISRC2);



	if (status == 0)

		return IRQ_NONE;



	if (status & Y2_IS_IRQ_SW) {

		sky2_write8(hw, B0_CTST, CS_CL_SW_IRQ);

		hw->msi = 1;

	}

	sky2_write32(hw, B0_Y2_SP_ICR, 2);



	sky2_read32(hw, B0_IMSK);

	return IRQ_HANDLED;

}



/* Test interrupt path by forcing a a software IRQ */

static int __devinit sky2_test_msi(struct sky2_hw *hw)

{

	struct pci_dev *pdev = hw->pdev;

	int i, err;



	sky2_write32(hw, B0_IMSK, Y2_IS_IRQ_SW);



	err = request_irq(pdev->irq, sky2_test_intr, SA_SHIRQ, DRV_NAME, hw);

	if (err) {

		printk(KERN_ERR PFX "%s: cannot assign irq %d\n",

		       pci_name(pdev), pdev->irq);

		return err;

	}



	sky2_write8(hw, B0_CTST, CS_ST_SW_IRQ);

	wmb();



	for (i = 0; i < 10; i++) {

		barrier();

		if (hw->msi)

			goto found;

		mdelay(1);

	}



	err = -EOPNOTSUPP;

	sky2_write8(hw, B0_CTST, CS_CL_SW_IRQ);

 found:

	sky2_write32(hw, B0_IMSK, 0);



	free_irq(pdev->irq, hw);



	return err;

}



static int __devinit sky2_probe(struct pci_dev *pdev,

				const struct pci_device_id *ent)

{
@@ -3184,6 +3243,20 @@ static int __devinit sky2_probe(struct pci_dev *pdev, 
		}

	}



	if (!disable_msi && pci_enable_msi(pdev) == 0) {

		err = sky2_test_msi(hw);

		if (err == -EOPNOTSUPP) {

			/* MSI test failed, go back to INTx mode */

			printk(KERN_WARNING PFX "%s: No interrupt was generated using MSI, "

			       "switching to INTx mode. Please report this failure to "

			       "the PCI maintainer and include system chipset information.\n",

			       pci_name(pdev));

			pci_disable_msi(pdev);

		}

		else if (err)

			goto err_out_unregister;

	}



	err = request_irq(pdev->irq, sky2_intr, SA_SHIRQ | SA_SAMPLE_RANDOM,

			  DRV_NAME, hw);

	if (err) {
@@ -3200,6 +3273,8 @@ static int __devinit sky2_probe(struct pci_dev *pdev, 
	return 0;



err_out_unregister:

	if (hw->msi)

		pci_disable_msi(pdev);

	if (dev1) {

		unregister_netdev(dev1);

		free_netdev(dev1);
@@ -3242,6 +3317,8 @@ static void __devexit sky2_remove(struct pci_dev *pdev) 
	sky2_read8(hw, B0_CTST);



	free_irq(pdev->irq, hw);

	if (hw->msi)

		pci_disable_msi(pdev);

	pci_free_consistent(pdev, STATUS_LE_BYTES, hw->st_le, hw->st_dma);

	pci_release_regions(pdev);

	pci_disable_device(pdev);

drivers/net/sky2.h

+1 −0
Original line number Diff line number Diff line
@@ -1841,6 +1841,7 @@ struct sky2_hw { 
	struct net_device    *dev[2];



	int		     pm_cap;

	int		     msi;

	u8	     	     chip_id;

	u8		     chip_rev;

	u8		     copper;