Commit 5dcc1aaf authored by Vaishnav Achath's avatar Vaishnav Achath Committed by Vignesh Raghavendra
Browse files

arm64: dts: ti: k3-am68-sk-base-board: Enable camera peripherals 

CSI cameras are controlled using I2C. On AM68 Starter Kit, this is routed
to I2C-1, so enable the instance and the TCA9543 I2C switch on the bus.

AM68 SK schematics: https://www.ti.com/lit/zip/sprr463



Signed-off-by: default avatarVaishnav Achath <vaishnav.a@ti.com>
Reviewed-by: default avatarJai Luthra <j-luthra@ti.com>
Link: https://lore.kernel.org/r/20240215085518.552692-4-vaishnav.a@ti.com


Signed-off-by: default avatarVignesh Raghavendra <vigneshr@ti.com>
parent fa646b70

arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts

+50 −0
Original line number Diff line number Diff line
@@ -169,6 +169,13 @@ tfp410_out: endpoint { 
			};

		};

	};



	csi_mux: mux-controller {

		compatible = "gpio-mux";

		#mux-state-cells = <1>;

		mux-gpios = <&exp3 1 GPIO_ACTIVE_HIGH>;

		idle-state = <0>;

	};

};



&main_pmx0 {
@@ -186,6 +193,13 @@ J721S2_IOPAD(0x0e4, PIN_INPUT, 0) /* (AE24) I2C0_SDA */ 
		>;

	};



	main_i2c1_pins_default: main-i2c1-default-pins {

		pinctrl-single,pins = <

			J721S2_IOPAD(0x0ac, PIN_INPUT, 13) /* (AC25) MCASP0_AXR15.I2C1_SCL */

			J721S2_IOPAD(0x0b0, PIN_INPUT, 13) /* (AD26) MCASP1_AXR3.I2C1_SDA */

		>;

	};



	main_mmc1_pins_default: main-mmc1-default-pins {

		pinctrl-single,pins = <

			J721S2_IOPAD(0x104, PIN_INPUT, 0) /* (P23) MMC1_CLK */
@@ -431,6 +445,42 @@ exp1: gpio@21 { 
	};

};



&main_i2c1 {

	pinctrl-names = "default";

	pinctrl-0 = <&main_i2c1_pins_default>;

	status = "okay";



	exp3: gpio@20 {

		compatible = "ti,tca6408";

		reg = <0x20>;

		gpio-controller;

		#gpio-cells = <2>;

		gpio-line-names = "CSI_VIO_SEL", "CSI_SEL_FPC_EXPn",

				  "IO_EXP_CSI2_EXP_RSTz","CSI0_B_GPIO1",

				  "CSI1_B_GPIO1";

	};



	i2c-mux@70 {

		compatible = "nxp,pca9543";

		#address-cells = <1>;

		#size-cells = <0>;

		reg = <0x70>;



		cam0_i2c: i2c@0 {

			#address-cells = <1>;

			#size-cells = <0>;

			reg = <0>;

		};



		cam1_i2c: i2c@1 {

			#address-cells = <1>;

			#size-cells = <0>;

			reg = <1>;

		};



	};

};



&main_i2c4 {

	status = "okay";

	pinctrl-names = "default";