Commit 5eabd602 authored by Harigovindan P's avatar Harigovindan P Committed by Bjorn Andersson
Browse files

arm64: dts: qcom: sc7180: add nodes for idp display 



Add nodes for IDP display. The display is Visionox RM69299.

Signed-off-by: default avatarHarigovindan P <harigovi@codeaurora.org>
Link: https://lore.kernel.org/r/20200629135144.8265-1-harigovi@codeaurora.org


Signed-off-by: default avatarBjorn Andersson <bjorn.andersson@linaro.org>
parent adfea97e

arch/arm64/boot/dts/qcom/sc7180-idp.dts

+65 −0
Original line number Diff line number Diff line
@@ -9,6 +9,7 @@ 


#include <dt-bindings/gpio/gpio.h>

#include <dt-bindings/regulator/qcom,rpmh-regulator.h>

#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>

#include "sc7180.dtsi"

#include "pm6150.dtsi"

#include "pm6150l.dtsi"
@@ -288,6 +289,57 @@ vreg_bob: bob { 
	};

};



&dsi0 {

	status = "okay";



	vdda-supply = <&vreg_l3c_1p2>;



	panel@0 {

		compatible = "visionox,rm69299-1080p-display";

		reg = <0>;



		vdda-supply = <&vreg_l8c_1p8>;

		vdd3p3-supply = <&vreg_l18a_2p8>;



		pinctrl-names = "default";

		pinctrl-0 = <&disp_pins>;



		reset-gpios = <&pm6150l_gpio 3 GPIO_ACTIVE_HIGH>;



		ports {

			#address-cells = <1>;

			#size-cells = <0>;

			port@0 {

				reg = <0>;

				panel0_in: endpoint {

					remote-endpoint = <&dsi0_out>;

				};

			};

		};

	};



	ports {

		port@1 {

			endpoint {

				remote-endpoint = <&panel0_in>;

				data-lanes = <0 1 2 3>;

			};

		};

	};

};



&dsi_phy {

	status = "okay";

};



&mdp {

	status = "okay";

};



&mdss {

	status = "okay";

};



&qfprom {

	vcc-supply = <&vreg_l11a_1p8>;

};
@@ -414,6 +466,19 @@ wifi-firmware { 


/* PINCTRL - additions to nodes defined in sc7180.dtsi */



&pm6150l_gpio {

	disp_pins: disp-pins {

		pinconf {

			pins = "gpio3";

			function = PMIC_GPIO_FUNC_FUNC1;

			qcom,drive-strength = <PMIC_GPIO_STRENGTH_MED>;

			power-source = <0>;

			bias-disable;

			output-low;

		};

	};

};



&qspi_clk {

	pinconf {

		pins = "gpio63";