Commit 64cb4a44 authored by Bryan O'Donoghue's avatar Bryan O'Donoghue Committed by Bjorn Andersson
Browse files

arm64: dts: qcom: sdm845-db845c-navigation-mezzanine: Add navigation mezzanine dts 



Move the dts data for the rb3 navigation mezzanine into its own dts file.

Suggested-by: default avatarDmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: default avatarBryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: default avatarBjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221117003232.589734-6-bryan.odonoghue@linaro.org
parent 5ceaa402

arch/arm64/boot/dts/qcom/Makefile

+1 −0
Original line number Diff line number Diff line
@@ -135,6 +135,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r1.dtb 
dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-cheza-r2.dtb

dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-cheza-r3.dtb

dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-db845c.dtb

dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-db845c-navigation-mezzanine.dtb

dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-lg-judyln.dtb

dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-lg-judyp.dtb

dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-mtp.dtb

arch/arm64/boot/dts/qcom/sdm845-db845c-navigation-mezzanine.dts

0 → 100644
+104 −0
Original line number Diff line number Diff line 
// SPDX-License-Identifier: GPL-2.0

/*

 * Copyright (c) 2022, Linaro Ltd.

 */



/dts-v1/;



#include "sdm845-db845c.dts"



&camss {

	vdda-phy-supply = <&vreg_l1a_0p875>;

	vdda-pll-supply = <&vreg_l26a_1p2>;



	status = "okay";



	ports {

		port@0 {

			csiphy0_ep: endpoint {

				data-lanes = <0 1 2 3>;

				remote-endpoint = <&ov8856_ep>;

			};

		};

	};

};



&cci {

	status = "okay";

};



&cci_i2c0 {

	camera@10 {

		compatible = "ovti,ov8856";

		reg = <0x10>;



		/* CAM0_RST_N */

		reset-gpios = <&tlmm 9 GPIO_ACTIVE_LOW>;

		pinctrl-names = "default";

		pinctrl-0 = <&cam0_default>;



		clocks = <&clock_camcc CAM_CC_MCLK0_CLK>;

		clock-names = "xvclk";

		clock-frequency = <19200000>;



		/*

		 * The &vreg_s4a_1p8 trace is powered on as a,

		 * so it is represented by a fixed regulator.

		 *

		 * The 2.8V vdda-supply and 1.2V vddd-supply regulators

		 * both have to be enabled through the power management

		 * gpios.

		 */

		dovdd-supply = <&vreg_lvs1a_1p8>;

		avdd-supply = <&cam0_avdd_2v8>;

		dvdd-supply = <&cam0_dvdd_1v2>;



		port {

			ov8856_ep: endpoint {

				link-frequencies = /bits/ 64

					<360000000 180000000>;

				data-lanes = <1 2 3 4>;

				remote-endpoint = <&csiphy0_ep>;

			};

		};

	};

};



&cci_i2c1 {

	camera@60 {

		compatible = "ovti,ov7251";



		/* I2C address as per ov7251.txt linux documentation */

		reg = <0x60>;



		/* CAM3_RST_N */

		enable-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>;

		pinctrl-names = "default";

		pinctrl-0 = <&cam3_default>;



		clocks = <&clock_camcc CAM_CC_MCLK3_CLK>;

		clock-names = "xclk";

		clock-frequency = <24000000>;



		/*

		 * The &vreg_s4a_1p8 trace always powered on.

		 *

		 * The 2.8V vdda-supply regulator is enabled when the

		 * vreg_s4a_1p8 trace is pulled high.

		 * It too is represented by a fixed regulator.

		 *

		 * No 1.2V vddd-supply regulator is used.

		 */

		vdddo-supply = <&vreg_lvs1a_1p8>;

		vdda-supply = <&cam3_avdd_2v8>;



		status = "disabled";



		port {

			ov7251_ep: endpoint {

				data-lanes = <0 1>;

/*				remote-endpoint = <&csiphy3_ep>; */

			};

		};

	};

};

arch/arm64/boot/dts/qcom/sdm845-db845c.dts

+0 −96
Original line number Diff line number Diff line
@@ -1174,102 +1174,6 @@ &pm8998_gpio { 


};



&cci {

	status = "okay";

};



&camss {

	vdda-phy-supply = <&vreg_l1a_0p875>;

	vdda-pll-supply = <&vreg_l26a_1p2>;



	status = "okay";



	ports {

		port@0 {

			csiphy0_ep: endpoint {

				data-lanes = <0 1 2 3>;

				remote-endpoint = <&ov8856_ep>;

			};

		};

	};

};



&cci_i2c0 {

	camera@10 {

		compatible = "ovti,ov8856";

		reg = <0x10>;



		/* CAM0_RST_N */

		reset-gpios = <&tlmm 9 GPIO_ACTIVE_LOW>;

		pinctrl-names = "default";

		pinctrl-0 = <&cam0_default>;



		clocks = <&clock_camcc CAM_CC_MCLK0_CLK>;

		clock-names = "xvclk";

		clock-frequency = <19200000>;



		/*

		 * The &vreg_s4a_1p8 trace is powered on as a,

		 * so it is represented by a fixed regulator.

		 *

		 * The 2.8V vdda-supply and 1.2V vddd-supply regulators

		 * both have to be enabled through the power management

		 * gpios.

		 */

		dovdd-supply = <&vreg_lvs1a_1p8>;

		avdd-supply = <&cam0_avdd_2v8>;

		dvdd-supply = <&cam0_dvdd_1v2>;



		port {

			ov8856_ep: endpoint {

				link-frequencies = /bits/ 64

					<360000000 180000000>;

				data-lanes = <1 2 3 4>;

				remote-endpoint = <&csiphy0_ep>;

			};

		};

	};

};



&cci_i2c1 {

	camera@60 {

		compatible = "ovti,ov7251";



		/* I2C address as per ov7251.txt linux documentation */

		reg = <0x60>;



		/* CAM3_RST_N */

		enable-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>;

		pinctrl-names = "default";

		pinctrl-0 = <&cam3_default>;



		clocks = <&clock_camcc CAM_CC_MCLK3_CLK>;

		clock-names = "xclk";

		clock-frequency = <24000000>;



		/*

		 * The &vreg_s4a_1p8 trace always powered on.

		 *

		 * The 2.8V vdda-supply regulator is enabled when the

		 * vreg_s4a_1p8 trace is pulled high.

		 * It too is represented by a fixed regulator.

		 *

		 * No 1.2V vddd-supply regulator is used.

		 */

		vdddo-supply = <&vreg_lvs1a_1p8>;

		vdda-supply = <&cam3_avdd_2v8>;



		status = "disabled";



		port {

			ov7251_ep: endpoint {

				data-lanes = <0 1>;

/*				remote-endpoint = <&csiphy3_ep>; */

			};

		};

	};

};



/* PINCTRL - additions to nodes defined in sdm845.dtsi */

&qup_spi0_default {

	config {