Commit 794007a8 authored Sep 27, 2024 by Yan Zhen Committed by Niklas Cassel Oct 01, 2024

ata: Fix typos in the comment



Correctly spelled comments make it easier for the reader to understand
the code.

Fix typos:
'multipe' ==> 'multiple',
'Paremeters' ==> 'Parameters',
'recieved' ==> 'received',
'realted' ==> 'related',
'evaulated' ==> 'evaluated',
'programing' ==> 'programming',
'coninue' ==> 'continue'.

Signed-off-by: Yan Zhen <yanzhen@vivo.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/20240927060056.221977-1-yanzhen@vivo.com


Signed-off-by: Niklas Cassel <cassel@kernel.org>

parent 9852d85e

drivers/ata/ahci.c

+1 −1

Original line number	Diff line number	Diff line
		@@ -1676,7 +1676,7 @@ static int ahci_init_msi(struct pci_dev *pdev, unsigned int n_ports,
		/*
		* If number of MSIs is less than number of ports then Sharing Last
		* Message mode could be enforced. In this case assume that advantage
		* of multipe MSIs is negated and use single MSI mode instead.
		* of multiple MSIs is negated and use single MSI mode instead.
		*/
		if (n_ports > 1) {
		nvec = pci_alloc_irq_vectors(pdev, n_ports, INT_MAX,

drivers/ata/ahci_imx.c

+1 −1

Original line number	Diff line number	Diff line
		@@ -511,7 +511,7 @@ static int imx_sata_enable(struct ahci_host_priv *hpriv)

		if (imxpriv->type == AHCI_IMX6Q \|\| imxpriv->type == AHCI_IMX6QP) {
		/*
		* set PHY Paremeters, two steps to configure the GPR13,
		* set PHY Parameters, two steps to configure the GPR13,
		* one write for rest of parameters, mask of first write
		* is 0x07ffffff, and the other one write for setting
		* the mpll_clk_en.

drivers/ata/ahci_xgene.c

+1 −1

Original line number	Diff line number	Diff line
		@@ -534,7 +534,7 @@ static int xgene_ahci_softreset(struct ata_link link, unsigned int class,

		/**
		* xgene_ahci_handle_broken_edge_irq - Handle the broken irq.
		* @host: Host that recieved the irq
		* @host: Host that received the irq
		* @irq_masked: HOST_IRQ_STAT value
		*
		* For hardware with broken edge trigger latch

drivers/ata/libata-acpi.c

+2 −2

Original line number	Diff line number	Diff line
		@@ -86,7 +86,7 @@ static void ata_acpi_detach_device(struct ata_port ap, struct ata_device dev)
		* @dev: ATA device ACPI event occurred (can be NULL)
		* @event: ACPI event which occurred
		*
		* All ACPI bay / device realted events end up in this function. If
		* All ACPI bay / device related events end up in this function. If
		* the event is port-wide @dev is NULL. If the event is specific to a
		* device, @dev points to it.
		*
		@@ -832,7 +832,7 @@ void ata_acpi_on_resume(struct ata_port *ap)
		dev->flags \|= ATA_DFLAG_ACPI_PENDING;
		}
		} else {
		/* SATA _GTF needs to be evaulated after _SDD and
		/* SATA _GTF needs to be evaluated after _SDD and
		* there's no reason to evaluate IDE _GTF early
		* without _STM. Clear cache and schedule _GTF.
		*/

drivers/ata/pata_it8213.c

+1 −1

Original line number	Diff line number	Diff line
		@@ -81,7 +81,7 @@ static void it8213_set_piomode (struct ata_port ap, struct ata_device adev)
		int control = 0;

		/*
		* See Intel Document 298600-004 for the timing programing rules
		* See Intel Document 298600-004 for the timing programming rules
		* for PIIX/ICH. The 8213 is a clone so very similar
		*/