Commit 7c4424dd authored by Primoz Fiser's avatar Primoz Fiser Committed by Shawn Guo
Browse files

arm64: dts: freescale: imx93-phyboard-segin: Add EQOS Ethernet 



Add support for the carrier-board Micrel KSZ8081 Ethernet PHY. This is a
10/100Mbit PHY connected to the EQOS interface and shares MDIO bus with
the Ethernet PHY located on the SoM (FEC interface).

Signed-off-by: default avatarPrimoz Fiser <primoz.fiser@norik.com>
Reviewed-by: default avatarFrank Li <Frank.Li@nxp.com>
Signed-off-by: default avatarShawn Guo <shawnguo@kernel.org>
parent c3f6c388

arch/arm64/boot/dts/freescale/imx93-phyboard-segin.dts

+35 −0
Original line number Diff line number Diff line
@@ -89,6 +89,28 @@ dailink_master: simple-audio-card,codec { 
	};

};



/* Ethernet */

&eqos {

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_eqos>;

	phy-mode = "rmii";

	phy-handle = <&ethphy2>;

	assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>,

				 <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>;

	assigned-clock-rates = <100000000>, <50000000>;

	status = "okay";

};



&mdio {

	ethphy2: ethernet-phy@2 {

		compatible = "ethernet-phy-id0022.1561";

		reg = <2>;

		clocks = <&clk IMX93_CLK_ENET_REF_PHY>;

		clock-names = "rmii-ref";

		micrel,led-mode = <1>;

	};

};



/* CAN */

&flexcan1 {

	pinctrl-names = "default";
@@ -173,6 +195,19 @@ &usdhc2 { 
};



&iomuxc {

	pinctrl_eqos: eqosgrp {

		fsl,pins = <

			MX93_PAD_ENET1_TD2__CCM_ENET_QOS_CLOCK_GENERATE_REF_CLK	0x4000050e

			MX93_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0		0x57e

			MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1		0x57e

			MX93_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0		0x50e

			MX93_PAD_ENET1_TD1__ENET_QOS_RGMII_TD1		0x50e

			MX93_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL	0x57e

			MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL	0x50e

			MX93_PAD_ENET1_RXC__ENET_QOS_RX_ER		0x57e

		>;

	};



	pinctrl_flexcan1: flexcan1grp {

		fsl,pins = <

			MX93_PAD_PDM_BIT_STREAM0__CAN1_RX	0x139e