Commit 87f54c12 authored by Marc Kleine-Budde's avatar Marc Kleine-Budde
Browse files

Merge patch series "can: m_can: set init flag earlier in probe" 

This series fixes problems in the m_can_pci driver found on the Intel
Elkhart Lake processor.

Link: https://patch.msgid.link/e247f331cb72829fcbdfda74f31a59cbad1a6006.1728288535.git.matthias.schiffer@ew.tq-group.com


Signed-off-by: default avatarMarc Kleine-Budde <mkl@pengutronix.de>
parents 954a2b40 743375f8

drivers/net/can/m_can/m_can.c

+26 −10
Original line number Diff line number Diff line
@@ -1220,20 +1220,32 @@ static void m_can_coalescing_update(struct m_can_classdev *cdev, u32 ir) 
static int m_can_interrupt_handler(struct m_can_classdev *cdev)

{

	struct net_device *dev = cdev->net;

	u32 ir;

	u32 ir = 0, ir_read;

	int ret;



	if (pm_runtime_suspended(cdev->dev))

		return IRQ_NONE;



	ir = m_can_read(cdev, M_CAN_IR);

	m_can_coalescing_update(cdev, ir);

	if (!ir)

		return IRQ_NONE;

	/* The m_can controller signals its interrupt status as a level, but

	 * depending in the integration the CPU may interpret the signal as

	 * edge-triggered (for example with m_can_pci). For these

	 * edge-triggered integrations, we must observe that IR is 0 at least

	 * once to be sure that the next interrupt will generate an edge.

	 */

	while ((ir_read = m_can_read(cdev, M_CAN_IR)) != 0) {

		ir |= ir_read;



		/* ACK all irqs */

		m_can_write(cdev, M_CAN_IR, ir);



		if (!cdev->irq_edge_triggered)

			break;

	}



	m_can_coalescing_update(cdev, ir);

	if (!ir)

		return IRQ_NONE;



	if (cdev->ops->clear_interrupts)

		cdev->ops->clear_interrupts(cdev);
@@ -1695,6 +1707,14 @@ static int m_can_dev_setup(struct m_can_classdev *cdev) 
		return -EINVAL;

	}



	/* Write the INIT bit, in case no hardware reset has happened before

	 * the probe (for example, it was observed that the Intel Elkhart Lake

	 * SoCs do not properly reset the CAN controllers on reboot)

	 */

	err = m_can_cccr_update_bits(cdev, CCCR_INIT, CCCR_INIT);

	if (err)

		return err;



	if (!cdev->is_peripheral)

		netif_napi_add(dev, &cdev->napi, m_can_poll);
@@ -1746,11 +1766,7 @@ static int m_can_dev_setup(struct m_can_classdev *cdev) 
		return -EINVAL;

	}



	/* Forcing standby mode should be redundant, as the chip should be in

	 * standby after a reset. Write the INIT bit anyways, should the chip

	 * be configured by previous stage.

	 */

	return m_can_cccr_update_bits(cdev, CCCR_INIT, CCCR_INIT);

	return 0;

}



static void m_can_stop(struct net_device *dev)

drivers/net/can/m_can/m_can.h

+1 −0
Original line number Diff line number Diff line
@@ -99,6 +99,7 @@ struct m_can_classdev { 
	int pm_clock_support;

	int pm_wake_source;

	int is_peripheral;

	bool irq_edge_triggered;



	// Cached M_CAN_IE register content

	u32 active_interrupts;

drivers/net/can/m_can/m_can_pci.c

+1 −0
Original line number Diff line number Diff line
@@ -127,6 +127,7 @@ static int m_can_pci_probe(struct pci_dev *pci, const struct pci_device_id *id) 
	mcan_class->pm_clock_support = 1;

	mcan_class->pm_wake_source = 0;

	mcan_class->can.clock.freq = id->driver_data;

	mcan_class->irq_edge_triggered = true;

	mcan_class->ops = &m_can_pci_ops;



	pci_set_drvdata(pci, mcan_class);