Commit 8c906de4 authored by Oleksij Rempel's avatar Oleksij Rempel Committed by Shawn Guo
Browse files

ARM: dts: add Plymovent M2M board 



Plymovent M2M is a control interface produced for the Plymovent filter
systems.

Co-Developed-by: default avatarDavid Jander <david@protonic.nl>
Signed-off-by: default avatarDavid Jander <david@protonic.nl>
Signed-off-by: default avatarOleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: default avatarShawn Guo <shawnguo@kernel.org>
parent 5c8fe583

arch/arm/boot/dts/Makefile

+1 −0
Original line number Diff line number Diff line
@@ -465,6 +465,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ 
	imx6dl-pico-hobbit.dtb \

	imx6dl-pico-nymph.dtb \

	imx6dl-pico-pi.dtb \

	imx6dl-plym2m.dtb \

	imx6dl-prtrvt.dtb \

	imx6dl-prtvt7.dtb \

	imx6dl-rex-basic.dtb \

arch/arm/boot/dts/imx6dl-plym2m.dts

0 → 100644
+446 −0
Original line number Diff line number Diff line 
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT

/*

 * Copyright (c) 2014 Protonic Holland

 * Copyright (c) 2020 Oleksij Rempel <kernel@pengutronix.de>, Pengutronix

 */



/dts-v1/;

#include <dt-bindings/gpio/gpio.h>

#include <dt-bindings/leds/common.h>

#include "imx6dl.dtsi"



/ {

	model = "Plymovent M2M board";

	compatible = "ply,plym2m", "fsl,imx6dl";



	chosen {

		stdout-path = &uart4;

	};



	backlight: backlight {

		compatible = "pwm-backlight";

		pwms = <&pwm1 0 5000000 0>;

		brightness-levels = <0 1000>;

		num-interpolated-steps = <20>;

		default-brightness-level = <19>;

		power-supply = <&reg_12v0>;

	};



	display {

		compatible = "fsl,imx-parallel-display";

		pinctrl-0 = <&pinctrl_ipu1_disp>;

		pinctrl-names = "default";

		#address-cells = <1>;

		#size-cells = <0>;



		port@0 {

			reg = <0>;



			display_in: endpoint {

				remote-endpoint = <&ipu1_di0_disp0>;

			};

		};



		port@1 {

			reg = <1>;



			display_out: endpoint {

				remote-endpoint = <&panel_in>;

			};

		};

	};



	leds {

		compatible = "gpio-leds";

		pinctrl-names = "default";

		pinctrl-0 = <&pinctrl_leds>;



		led-0 {

			label = "debug0";

			function = LED_FUNCTION_STATUS;

			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;

			linux,default-trigger = "heartbeat";

		};

	};



	panel {

		compatible = "edt,etm0700g0bdh6";

		backlight = <&backlight>;

		power-supply = <&reg_3v3>;



		port {

			panel_in: endpoint {

				remote-endpoint = <&display_out>;

			};

		};

	};



	clk50m_phy: phy-clock {

		compatible = "fixed-clock";

		#clock-cells = <0>;

		clock-frequency = <50000000>;

	};



	reg_3v3: regulator-3v3 {

		compatible = "regulator-fixed";

		regulator-name = "3v3";

		regulator-min-microvolt = <3300000>;

		regulator-max-microvolt = <3300000>;

	};



	reg_5v0: regulator-5v0 {

		compatible = "regulator-fixed";

		regulator-name = "5v0";

		regulator-min-microvolt = <5000000>;

		regulator-max-microvolt = <5000000>;

	};



	reg_12v0: regulator-12v0 {

		compatible = "regulator-fixed";

		regulator-name = "12v0";

		regulator-min-microvolt = <12000000>;

		regulator-max-microvolt = <12000000>;

	};

};



&can1 {

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_can1>;

	xceiver-supply = <&reg_5v0>;

	status = "okay";

};



&ecspi1 {

	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_ecspi1>;

	status = "okay";



	flash@0 {

		compatible = "jedec,spi-nor";

		reg = <0>;

		spi-max-frequency = <20000000>;

	};

};



&ecspi2 {

	cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_ecspi2>;

	status = "okay";



	touchscreen@0 {

		compatible = "ti,tsc2046";

		reg = <0>;

		pinctrl-0 = <&pinctrl_tsc2046>;

		pinctrl-names ="default";

		spi-max-frequency = <100000>;

		interrupts-extended = <&gpio3 20 IRQ_TYPE_EDGE_FALLING>;

		pendown-gpio = <&gpio3 20 GPIO_ACTIVE_LOW>;



		touchscreen-size-x = <800>;

		touchscreen-size-y = <480>;

		touchscreen-inverted-x;

		touchscreen-inverted-y;

		touchscreen-max-pressure = <4095>;



		ti,vref-delay-usecs = /bits/ 16 <100>;

		ti,x-plate-ohms = /bits/ 16 <800>;

		ti,y-plate-ohms = /bits/ 16 <300>;



		wakeup-source;

	};

};



&fec {

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_enet>;

	phy-mode = "rmii";

	clocks = <&clks IMX6QDL_CLK_ENET>,

		 <&clks IMX6QDL_CLK_ENET>,

		 <&clk50m_phy>;

	clock-names = "ipg", "ahb", "ptp";

	phy-handle = <&rgmii_phy>;

	status = "okay";



	mdio {

		#address-cells = <1>;

		#size-cells = <0>;



		/* Microchip KSZ8081RNA PHY */

		rgmii_phy: ethernet-phy@0 {

			reg = <0>;

			interrupts-extended = <&gpio5 23 IRQ_TYPE_LEVEL_LOW>;

			reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;

			reset-assert-us = <10000>;

			reset-deassert-us = <300>;

		};

	};

};



&gpio1 {

	gpio-line-names =

		"CAN1_TERM", "SD1_CD", "", "", "", "", "", "",

		"DEBUG_0", "", "", "", "", "", "", "",

		"", "", "", "", "", "", "", "",

		"", "", "", "", "", "", "", "";

};



&gpio2 {

	gpio-line-names =

		"", "", "", "", "", "", "", "",

		"", "", "", "", "", "", "", "",

		"", "", "", "", "", "", "", "",

		"", "", "ECSPI2_SS0", "", "", "", "TSC_BUSY", "";

};



&gpio3 {

	gpio-line-names =

		"", "", "", "", "", "", "", "",

		"", "", "", "", "", "", "", "",

		"", "", "", "ECSPI1_SS1", "TSC_PENIRQ", "", "", "",

		"", "", "", "", "", "", "", "";

};



&gpio4 {

	gpio-line-names =

		"", "", "", "", "", "", "", "",

		"", "", "", "", "CAN1_SR", "", "", "",

		"", "", "", "", "", "", "", "",

		"", "", "", "", "", "", "", "";

};



&gpio5 {

	gpio-line-names =

		"", "", "", "", "", "", "", "",

		"", "", "", "", "", "", "", "",

		"", "", "", "", "", "", "ETH_RESET", "ETH_INTRP",

		"", "", "", "", "", "", "", "";

};



&i2c1 {

	clock-frequency = <100000>;

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_i2c1>;

	status = "okay";



	/* additional i2c devices are added automatically by the boot loader */

};



&i2c3 {

	clock-frequency = <100000>;

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_i2c3>;

	status = "okay";



	temperature-sensor@70 {

		compatible = "ti,tmp103";

		reg = <0x70>;

	};

};



&ipu1_di0_disp0 {

	remote-endpoint = <&display_in>;

};



&pwm1 {

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_pwm1>;

	status = "okay";

};



&uart4 {

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_uart4>;

	status = "okay";

};



&usbphynop1 {

	status = "disabled";

};



&usbphynop2 {

	status = "disabled";

};



&usbotg {

	phy_type = "utmi";

	dr_mode = "host";

	disable-over-current;

	status = "okay";

};



&usdhc1 {

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_usdhc1>;

	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;

	no-1-8-v;

	disable-wp;

	cap-sd-highspeed;

	no-mmc;

	no-sdio;

	status = "okay";

};



&usdhc3 {

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_usdhc3>;

	bus-width = <8>;

	no-1-8-v;

	non-removable;

	no-sd;

	no-sdio;

	status = "okay";

};



&iomuxc {

	pinctrl_can1: can1grp {

		fsl,pins = <

			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX		0x1b000

			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX		0x3008

			/* CAN1_SR */

			MX6QDL_PAD_KEY_COL3__GPIO4_IO12			0x13008

			/* CAN1_TERM */

			MX6QDL_PAD_GPIO_0__GPIO1_IO00			0x1b088

		>;

	};



	pinctrl_ecspi1: ecspi1grp {

		fsl,pins = <

			MX6QDL_PAD_EIM_D17__ECSPI1_MISO			0x1b000

			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI			0x3008

			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK			0x3008

			/* CS */

			MX6QDL_PAD_EIM_D19__GPIO3_IO19			0x3008

		>;

	};



	pinctrl_ecspi2: ecspi2grp {

		fsl,pins = <

			MX6QDL_PAD_EIM_OE__ECSPI2_MISO			0x10000

			MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK			0x3008

			MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI			0x3008

			/* CS */

			MX6QDL_PAD_EIM_RW__GPIO2_IO26			0x3008

		>;

	};



	pinctrl_enet: enetgrp {

		fsl,pins = <

			/* MX6QDL_ENET_PINGRP4 */

			MX6QDL_PAD_ENET_MDC__ENET_MDC			0x1b0b0

			MX6QDL_PAD_ENET_MDIO__ENET_MDIO			0x1b0b0

			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0		0x1b0b0

			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1		0x1b0b0

			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER		0x1b0b0

			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN		0x1b0b0

			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0		0x1b0b0

			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1		0x1b0b0

			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN		0x1b0b0



			MX6QDL_PAD_GPIO_16__ENET_REF_CLK		0x1b0b0

			/* Phy reset */

			MX6QDL_PAD_CSI0_DAT4__GPIO5_IO22		0x1b0b0

			/* nINTRP */

			MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23		0x1b0b0

		>;

	};



	pinctrl_i2c1: i2c1grp {

		fsl,pins = <

			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA			0x4001f8b1

			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL			0x4001f8b1

		>;

	};



	pinctrl_i2c3: i2c3grp {

		fsl,pins = <

			MX6QDL_PAD_GPIO_5__I2C3_SCL			0x4001b8b1

			MX6QDL_PAD_GPIO_6__I2C3_SDA			0x4001b8b1

		>;

	};



	pinctrl_ipu1_disp: ipudisp1grp {

		fsl,pins = <

			/* DSE 0x30 => 25 Ohm, 0x20 => 37 Ohm, 0x10 => 75 Ohm */

			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0x30

			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15		0x30

			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0x30

			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0x30

			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0x30

			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0x30

			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0x30

			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0x30

			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0x30

			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0x30

			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0x30

			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0x30

			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0x30

			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0x30

			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0x30

			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0x30

			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0x30

			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0x30

			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0x30

			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0x30

			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0x30

			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0x30

		>;

	};



	pinctrl_leds: ledsgrp {

		fsl,pins = <

			MX6QDL_PAD_GPIO_8__GPIO1_IO08			0x1b0b0

		>;

	};



	pinctrl_pwm1: pwm1grp {

		fsl,pins = <

			MX6QDL_PAD_GPIO_9__PWM1_OUT			0x8

		>;

	};



	pinctrl_tsc2046: tsc2046grp {

		fsl,pins = <

			/* TSC_PENIRQ */

			MX6QDL_PAD_EIM_D20__GPIO3_IO20			0x1b0b1

			/* TSC_BUSY */

			MX6QDL_PAD_EIM_EB2__GPIO2_IO30			0x1b0b0

		>;

	};



	pinctrl_uart4: uart4grp {

		fsl,pins = <

			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA		0x1b0b1

			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA		0x1b0b1

		>;

	};



	pinctrl_usdhc1: usdhc1grp {

		fsl,pins = <

			MX6QDL_PAD_SD1_CMD__SD1_CMD			0x170f9

			MX6QDL_PAD_SD1_CLK__SD1_CLK			0x100f9

			MX6QDL_PAD_SD1_DAT0__SD1_DATA0			0x170f9

			MX6QDL_PAD_SD1_DAT1__SD1_DATA1			0x170f9

			MX6QDL_PAD_SD1_DAT2__SD1_DATA2			0x170f9

			MX6QDL_PAD_SD1_DAT3__SD1_DATA3			0x170f9

			MX6QDL_PAD_GPIO_1__GPIO1_IO01			0x1b0b0

		>;

	};



	pinctrl_usdhc3: usdhc3grp {

		fsl,pins = <

			MX6QDL_PAD_SD3_CMD__SD3_CMD			0x17099

			MX6QDL_PAD_SD3_CLK__SD3_CLK			0x10099

			MX6QDL_PAD_SD3_DAT0__SD3_DATA0			0x17099

			MX6QDL_PAD_SD3_DAT1__SD3_DATA1			0x17099

			MX6QDL_PAD_SD3_DAT2__SD3_DATA2			0x17099

			MX6QDL_PAD_SD3_DAT3__SD3_DATA3			0x17099

			MX6QDL_PAD_SD3_DAT4__SD3_DATA4			0x17099

			MX6QDL_PAD_SD3_DAT5__SD3_DATA5			0x17099

			MX6QDL_PAD_SD3_DAT6__SD3_DATA6			0x17099

			MX6QDL_PAD_SD3_DAT7__SD3_DATA7			0x17099

			MX6QDL_PAD_SD3_RST__SD3_RESET			0x1b0b1

		>;

	};

};