Commit 8cec14e6 authored by Dmitry Baryshkov's avatar Dmitry Baryshkov Committed by Bjorn Andersson
Browse files

arm64: dts: qcom: sm8150-hdk: describe WiFi/BT properly 



Properly describe the PMU present as a part of the onboard WCN3998
WiFi/BT chip. Enable Bluetooth part of the chip too.

[    5.479978] Bluetooth: hci0: setting up wcn399x
[    5.633763] Bluetooth: hci0: QCA Product ID   :0x0000000a
[    5.645350] Bluetooth: hci0: QCA SOC Version  :0x40010224
[    5.650906] Bluetooth: hci0: QCA ROM Version  :0x00001001
[    5.665173] Bluetooth: hci0: QCA Patch Version:0x00006699
[    5.679356] Bluetooth: hci0: QCA controller version 0x02241001
[    5.691109] Bluetooth: hci0: QCA Downloading qca/crbtfw21.tlv
[    6.680102] Bluetooth: hci0: QCA Downloading qca/crnv21.bin
[    6.842948] Bluetooth: hci0: QCA setup on UART is completed

[   81.510709] ath10k_snoc 18800000.wifi: qmi chip_id 0x30224 chip_family 0x4001 board_id 0x55 soc_id 0x40060000
[   81.521713] ath10k_snoc 18800000.wifi: qmi fw_version 0x32040163 fw_build_timestamp 2019-10-08 05:42 fw_build_id QC_IMAGE_VERSION_STRING=WLAN.HL.3.2.0-00355-QCAHLSWMTPLZ-1
[   81.554143] ath10k_snoc 18800000.wifi: failed to fetch board data for bus=snoc,qmi-board-id=55,qmi-chip-id=30224,variant=Qualcomm_sm8150hdk from ath10k/WCN3990/hw1.0/board-2.bin
[   85.467464] ath10k_snoc 18800000.wifi: wcn3990 hw1.0 target 0x00000008 chip_id 0x00000000 sub 0000:0000
[   85.478132] ath10k_snoc 18800000.wifi: kconfig debug 0 debugfs 0 tracing 0 dfs 0 testmode 0
[   85.487223] ath10k_snoc 18800000.wifi: firmware ver  api 5 features wowlan,mgmt-tx-by-reference,non-bmi crc32 b3d4b790
[   85.758168] ath10k_snoc 18800000.wifi: htt-ver 3.73 wmi-op 4 htt-op 3 cal file max-sta 32 raw 0 hwcrypto 1
[   85.901630] ath10k_snoc 18800000.wifi: invalid MAC address; choosing random

Reviewed-by: default avatarBartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: default avatarKonrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: default avatarDmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260106-wcn3990-pwrctl-v2-14-0386204328be@oss.qualcomm.com


Signed-off-by: default avatarBjorn Andersson <andersson@kernel.org>
parent a8aef264

arch/arm64/boot/dts/qcom/sm8150-hdk.dts

+136 −5
Original line number Diff line number Diff line
@@ -20,6 +20,7 @@ / { 


	aliases {

		serial0 = &uart2;

		serial1 = &uart13;

	};



	chosen {
@@ -66,6 +67,43 @@ hdmi_con: endpoint { 
			};

		};

	};



	wcn3998-pmu {

		compatible = "qcom,wcn3998-pmu";



		pinctrl-0 = <&sw_ctrl_default>;

		pinctrl-names = "default";



		vddio-supply = <&vreg_s4a_1p8>;

		vddxo-supply = <&vreg_l7a_1p8>;

		vddrf-supply = <&vreg_l2c_1p3>;

		vddch0-supply = <&vreg_l11c_3p3>;

		vddch1-supply = <&vreg_l10c_3p3>;



		swctrl-gpios = <&tlmm 50 GPIO_ACTIVE_HIGH>;



		regulators {

			vreg_pmu_io: ldo0 {

				regulator-name = "vreg_pmu_io";

			};



			vreg_pmu_xo: ldo1 {

				regulator-name = "vreg_pmu_xo";

			};



			vreg_pmu_rf: ldo2 {

				regulator-name = "vreg_pmu_rf";

			};



			vreg_pmu_ch0: ldo3 {

				regulator-name = "vreg_pmu_ch0";

			};



			vreg_pmu_ch1: ldo4 {

				regulator-name = "vreg_pmu_ch1";

			};

		};

	};

};



&apps_rsc {
@@ -598,6 +636,10 @@ &qupv3_id_1 { 
	status = "okay";

};



&qupv3_id_2 {

	status = "okay";

};



&remoteproc_adsp {

	status = "okay";
@@ -630,12 +672,97 @@ lt9611_irq_pin: lt9611-irq-state { 
		bias-disable;

	};



	qup_uart13_default: qup-uart13-default-state {

		cts-pins {

			pins = "gpio43";

			function = "qup13";

			drive-strength = <2>;

			bias-bus-hold;

		};



		rts-pins {

			pins = "gpio44";

			function = "qup13";

			drive-strength = <2>;

			bias-disable;

		};



		tx-pins {

			pins = "gpio45";

			function = "qup13";

			drive-strength = <2>;

			bias-disable;

		};



		rx-pins {

			pins = "gpio46";

			function = "qup13";

			drive-strength = <2>;

			bias-pull-up;

		};

	};



	qup_uart13_sleep: qup-uart13-sleep-state {

		cts-pins {

			pins = "gpio43";

			function = "gpio";

			drive-strength = <2>;

			bias-bus-hold;

		};



		rts-pins {

			pins = "gpio44";

			function = "gpio";

			drive-strength = <2>;

			bias-pull-down;

		};



		tx-pins {

			pins = "gpio45";

			function = "gpio";

			drive-strength = <2>;

			bias-pull-up;

		};



		rx-pins {

			pins = "gpio46";

			function = "gpio";

			drive-strength = <2>;

			bias-pull-up;

		};

	};



	sw_ctrl_default: sw-ctrl-default-state {

		pins = "gpio50";

		function = "gpio";

		bias-pull-down;

	};

};



&uart2 {

	status = "okay";

};



&uart13 {

	/delete-property/ interrupts;

	interrupts-extended = <&intc GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>,

			      <&tlmm 46 IRQ_TYPE_EDGE_FALLING>;

	pinctrl-0 = <&qup_uart13_default>;

	pinctrl-1 = <&qup_uart13_sleep>;

	pinctrl-names = "default", "sleep";



	status = "okay";



	bluetooth {

		compatible = "qcom,wcn3998-bt";



		vddio-supply = <&vreg_pmu_io>;

		vddxo-supply = <&vreg_pmu_xo>;

		vddrf-supply = <&vreg_pmu_rf>;

		vddch0-supply = <&vreg_pmu_ch0>;

	};

};



&ufs_mem_hc {

	status = "okay";
@@ -709,12 +836,16 @@ &usb_2_dwc3 { 
};



&wifi {

	status = "okay";



	/* SoC */

	vdd-0.8-cx-mx-supply = <&vreg_l1a_0p75>;

	vdd-1.8-xo-supply = <&vreg_l7a_1p8>;

	vdd-1.3-rfa-supply = <&vreg_l2c_1p3>;

	vdd-3.3-ch0-supply = <&vreg_l11c_3p3>;



	/* WiFi / BT PMU */

	vdd-1.8-xo-supply = <&vreg_pmu_xo>;

	vdd-1.3-rfa-supply = <&vreg_pmu_rf>;

	vdd-3.3-ch0-supply = <&vreg_pmu_ch0>;

	vdd-3.3-ch1-supply = <&vreg_pmu_ch1>;



	qcom,calibration-variant = "Qualcomm_sm8150hdk";



	status = "okay";

};