Commit 92af5c13 authored by Lee Jones's avatar Lee Jones
Browse files

Merge branches 'ib-mfd-iio-input-4.20', 'ib-mfd-irqchip-4.20',... 

Merge branches 'ib-mfd-iio-input-4.20', 'ib-mfd-irqchip-4.20', 'ib-mfd-rtc-4.20' and 'ib-mfd-spi-tty-4.20-1' into ibs-for-mfd-merged
parents 7a39915b d31ca7e5 9612f8f5 65b80dff

Documentation/devicetree/bindings/serial/atmel-usart.txt→Documentation/devicetree/bindings/mfd/atmel-usart.txt

+23 −2
Original line number Diff line number Diff line 
* Atmel Universal Synchronous Asynchronous Receiver/Transmitter (USART)



Required properties:

Required properties for USART:

- compatible: Should be "atmel,<chip>-usart" or "atmel,<chip>-dbgu"

  The compatible <chip> indicated will be the first SoC to support an

  additional mode or an USART new feature.
@@ -11,7 +11,13 @@ Required properties: 
	Required elements: "usart"

- clocks: phandles to input clocks.



Optional properties:

Required properties for USART in SPI mode:

- #size-cells      : Must be <0>

- #address-cells   : Must be <1>

- cs-gpios: chipselects (internal cs not supported)

- atmel,usart-mode : Must be <AT91_USART_MODE_SPI> (found in dt-bindings/mfd/at91-usart.h)



Optional properties in serial mode:

- atmel,use-dma-rx: use of PDC or DMA for receiving data

- atmel,use-dma-tx: use of PDC or DMA for transmitting data

- {rts,cts,dtr,dsr,rng,dcd}-gpios: specify a GPIO for RTS/CTS/DTR/DSR/RI/DCD line respectively.
@@ -62,3 +68,18 @@ Example: 
		dma-names = "tx", "rx";

		atmel,fifo-size = <32>;

	};



- SPI mode:

	#include <dt-bindings/mfd/at91-usart.h>



	spi0: spi@f001c000 {

		#address-cells = <1>;

		#size-cells = <0>;

		compatible = "atmel,at91rm9200-usart", "atmel,at91sam9260-usart";

		atmel,usart-mode = <AT91_USART_MODE_SPI>;

		reg = <0xf001c000 0x100>;

		interrupts = <12 IRQ_TYPE_LEVEL_HIGH 5>;

		clocks = <&usart0_clk>;

		clock-names = "usart";

		cs-gpios = <&pioB 3 0>;

	};

MAINTAINERS

+16 −0
Original line number Diff line number Diff line
@@ -9502,6 +9502,7 @@ M: Richard Genoud <richard.genoud@gmail.com> 
S:	Maintained

F:	drivers/tty/serial/atmel_serial.c

F:	drivers/tty/serial/atmel_serial.h

F:	Documentation/devicetree/bindings/mfd/atmel-usart.txt



MICROCHIP / ATMEL DMA DRIVER

M:	Ludovic Desroches <ludovic.desroches@microchip.com>
@@ -9533,6 +9534,21 @@ S: Supported 
F:	drivers/mtd/nand/raw/atmel/*

F:	Documentation/devicetree/bindings/mtd/atmel-nand.txt



MICROCHIP AT91 USART MFD DRIVER

M:	Radu Pirea <radu_nicolae.pirea@upb.ro>

L:	linux-kernel@vger.kernel.org

S:	Supported

F:	drivers/mfd/at91-usart.c

F:	include/dt-bindings/mfd/at91-usart.h

F:	Documentation/devicetree/bindings/mfd/atmel-usart.txt



MICROCHIP AT91 USART SPI DRIVER

M:	Radu Pirea <radu_nicolae.pirea@upb.ro>

L:	linux-spi@vger.kernel.org

S:	Supported

F:	drivers/spi/spi-at91-usart.c

F:	Documentation/devicetree/bindings/mfd/atmel-usart.txt



MICROCHIP KSZ SERIES ETHERNET SWITCH DRIVER

M:	Woojung Huh <Woojung.Huh@microchip.com>

M:	Microchip Linux Driver Support <UNGLinuxDriver@microchip.com>

drivers/mfd/Kconfig

+9 −0
Original line number Diff line number Diff line
@@ -99,6 +99,15 @@ config MFD_AAT2870_CORE 
	  additional drivers must be enabled in order to use the

	  functionality of the device.



config MFD_AT91_USART

	tristate "AT91 USART Driver"

	select MFD_CORE

	help

	  Select this to get support for AT91 USART IP. This is a wrapper

	  over at91-usart-serial driver and usart-spi-driver. Only one function

	  can be used at a time. The choice is done at boot time by the probe

	  function of this MFD driver according to a device tree property.



config MFD_ATMEL_FLEXCOM

	tristate "Atmel Flexcom (Flexible Serial Communication Unit)"

	select MFD_CORE

drivers/mfd/Makefile

+1 −0
Original line number Diff line number Diff line
@@ -196,6 +196,7 @@ obj-$(CONFIG_MFD_SPMI_PMIC) += qcom-spmi-pmic.o 
obj-$(CONFIG_TPS65911_COMPARATOR)	+= tps65911-comparator.o

obj-$(CONFIG_MFD_TPS65090)	+= tps65090.o

obj-$(CONFIG_MFD_AAT2870_CORE)	+= aat2870-core.o

obj-$(CONFIG_MFD_AT91_USART)	+= at91-usart.o

obj-$(CONFIG_MFD_ATMEL_FLEXCOM)	+= atmel-flexcom.o

obj-$(CONFIG_MFD_ATMEL_HLCDC)	+= atmel-hlcdc.o

obj-$(CONFIG_MFD_ATMEL_SMC)	+= atmel-smc.o

drivers/mfd/at91-usart.c

0 → 100644
+72 −0
Original line number Diff line number Diff line 
// SPDX-License-Identifier: GPL-2.0

/*

 * Driver for AT91 USART

 *

 * Copyright (C) 2018 Microchip Technology

 *

 * Author: Radu Pirea <radu.pirea@microchip.com>

 *

 */



#include <dt-bindings/mfd/at91-usart.h>



#include <linux/module.h>

#include <linux/mfd/core.h>

#include <linux/of.h>

#include <linux/property.h>



static struct mfd_cell at91_usart_spi_subdev = {

		.name = "at91_usart_spi",

		.of_compatible = "microchip,at91sam9g45-usart-spi",

	};



static struct mfd_cell at91_usart_serial_subdev = {

		.name = "atmel_usart_serial",

		.of_compatible = "atmel,at91rm9200-usart-serial",

	};



static int at91_usart_mode_probe(struct platform_device *pdev)

{

	struct mfd_cell cell;

	u32 opmode = AT91_USART_MODE_SERIAL;



	device_property_read_u32(&pdev->dev, "atmel,usart-mode", &opmode);



	switch (opmode) {

	case AT91_USART_MODE_SPI:

		cell = at91_usart_spi_subdev;

		break;

	case AT91_USART_MODE_SERIAL:

		cell = at91_usart_serial_subdev;

		break;

	default:

		dev_err(&pdev->dev, "atmel,usart-mode has an invalid value %u\n",

			opmode);

		return -EINVAL;

	}



	return devm_mfd_add_devices(&pdev->dev, PLATFORM_DEVID_AUTO, &cell, 1,

			      NULL, 0, NULL);

}



static const struct of_device_id at91_usart_mode_of_match[] = {

	{ .compatible = "atmel,at91rm9200-usart" },

	{ .compatible = "atmel,at91sam9260-usart" },

	{ /* sentinel */ }

};



MODULE_DEVICE_TABLE(of, at91_usart_mode_of_match);



static struct platform_driver at91_usart_mfd = {

	.probe	= at91_usart_mode_probe,

	.driver	= {

		.name		= "at91_usart_mode",

		.of_match_table	= at91_usart_mode_of_match,

	},

};



module_platform_driver(at91_usart_mfd);



MODULE_AUTHOR("Radu Pirea <radu.pirea@microchip.com>");

MODULE_DESCRIPTION("AT91 USART MFD driver");

MODULE_LICENSE("GPL v2");