Commit 9b115361 authored by Meghana Malladi's avatar Meghana Malladi Committed by David S. Miller
Browse files

net: ti: icssg-prueth: Fix clearing of IEP_CMP_CFG registers during iep_init 



When ICSSG interfaces are brought down and brought up again, the
pru cores are shut down and booted again, flushing out all the memories
and start again in a clean state. Hence it is expected that the
IEP_CMP_CFG register needs to be flushed during iep_init() to ensure
that the existing residual configuration doesn't cause any unusual
behavior. If the register is not cleared, existing IEP_CMP_CFG set for
CMP1 will result in SYNC0_OUT signal based on the SYNC_OUT register values.

After bringing the interface up, calling PPS enable doesn't work as
the driver believes PPS is already enabled, (iep->pps_enabled is not
cleared during interface bring down) and driver will just return true
even though there is no signal. Fix this by disabling pps and perout.

Fixes: c1e0230e ("net: ti: icss-iep: Add IEP driver")
Signed-off-by: default avatarMeghana Malladi <m-malladi@ti.com>
Reviewed-by: default avatarRoger Quadros <rogerq@kernel.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 9facce84

drivers/net/ethernet/ti/icssg/icss_iep.c

+8 −0
Original line number Diff line number Diff line
@@ -215,6 +215,9 @@ static void icss_iep_enable_shadow_mode(struct icss_iep *iep) 
	for (cmp = IEP_MIN_CMP; cmp < IEP_MAX_CMP; cmp++) {

		regmap_update_bits(iep->map, ICSS_IEP_CMP_STAT_REG,

				   IEP_CMP_STATUS(cmp), IEP_CMP_STATUS(cmp));



		regmap_update_bits(iep->map, ICSS_IEP_CMP_CFG_REG,

				   IEP_CMP_CFG_CMP_EN(cmp), 0);

	}



	/* enable reset counter on CMP0 event */
@@ -780,6 +783,11 @@ int icss_iep_exit(struct icss_iep *iep) 
	}

	icss_iep_disable(iep);



	if (iep->pps_enabled)

		icss_iep_pps_enable(iep, false);

	else if (iep->perout_enabled)

		icss_iep_perout_enable(iep, NULL, false);



	return 0;

}

EXPORT_SYMBOL_GPL(icss_iep_exit);