Commit a5fcc236 authored by Petr Mladek's avatar Petr Mladek Committed by Andrew Morton
Browse files

watchdog/hardlockup: make HAVE_NMI_WATCHDOG sparc64-specific

There are several hardlockup detector implementations and several Kconfig
values which allow selection and build of the preferred one.

CONFIG_HARDLOCKUP_DETECTOR was introduced by the commit 23637d47
("lockup_detector: Introduce CONFIG_HARDLOCKUP_DETECTOR") in v2.6.36.
It was a preparation step for introducing the new generic perf hardlockup
detector.

The existing arch-specific variants did not support the to-be-created
generic build configurations, sysctl interface, etc. This distinction
was made explicit by the commit 4a7863cc ("x86, nmi_watchdog:
Remove ARCH_HAS_NMI_WATCHDOG and rely on CONFIG_HARDLOCKUP_DETECTOR")
in v2.6.38.

CONFIG_HAVE_NMI_WATCHDOG was introduced by the commit d314d74c
("nmi watchdog: do not use cpp symbol in Kconfig") in v3.4-rc1. It replaced
the above mentioned ARCH_HAS_NMI_WATCHDOG. At that time, it was still used
by three architectures, namely blackfin, mn10300, and sparc.

The support for blackfin and mn10300 architectures has been completely
dropped some time ago. And sparc is the only architecture with the historic
NMI watchdog at the moment.

And the old sparc implementation is really special. It is always built on
sparc64. It used to be always enabled until the commit 7a5c8b57
("sparc: implement watchdog_nmi_enable and watchdog_nmi_disable") added
in v4.10-rc1.

There are only few locations where the sparc64 NMI watchdog interacts
with the generic hardlockup detectors code:

  + implements arch_touch_nmi_watchdog() which is called from the generic
    touch_nmi_watchdog()

  + implements watchdog_hardlockup_enable()/disable() to support
    /proc/sys/kernel/nmi_watchdog

  + is always preferred over other generic watchdogs, see
    CONFIG_HARDLOCKUP_DETECTOR

  + includes asm/nmi.h into linux/nmi.h because some sparc-specific
    functions are needed in sparc-specific code which includes
    only linux/nmi.h.

The situation became more complicated after the commit 05a4a952
("kernel/watchdog: split up config options") and commit 2104180a
("powerpc/64s: implement arch-specific hardlockup watchdog") in v4.13-rc1.
They introduced HAVE_HARDLOCKUP_DETECTOR_ARCH. It was used for powerpc
specific hardlockup detector. It was compatible with the perf one
regarding the general boot, sysctl, and programming interfaces.

HAVE_HARDLOCKUP_DETECTOR_ARCH was defined as a superset of
HAVE_NMI_WATCHDOG. It made some sense because all arch-specific
detectors had some common requirements, namely:

  + implemented arch_touch_nmi_watchdog()
  + included asm/nmi.h into linux/nmi.h
  + defined the default value for /proc/sys/kernel/nmi_watchdog

But it actually has made things pretty complicated when the generic
buddy hardlockup detector was added. Before the generic perf detector
was newer supported together with an arch-specific one. But the buddy
detector could work on any SMP system. It means that an architecture
could support both the arch-specific and buddy detector.

As a result, there are few tricky dependencies. For example,
CONFIG_HARDLOCKUP_DETECTOR depends on:

  ((HAVE_HARDLOCKUP_DETECTOR_PERF || HAVE_HARDLOCKUP_DETECTOR_BUDDY) && !HAVE_NMI_WATCHDOG) || HAVE_HARDLOCKUP_DETECTOR_ARCH

The problem is that the very special sparc implementation is defined as:

  HAVE_NMI_WATCHDOG && !HAVE_HARDLOCKUP_DETECTOR_ARCH

Another problem is that the meaning of HAVE_NMI_WATCHDOG is far from clear
without reading understanding the history.

Make the logic less tricky and more self-explanatory by making
HAVE_NMI_WATCHDOG specific for the sparc64 implementation. And rename it to
HAVE_HARDLOCKUP_DETECTOR_SPARC64.

Note that HARDLOCKUP_DETECTOR_PREFER_BUDDY, HARDLOCKUP_DETECTOR_PERF,
and HARDLOCKUP_DETECTOR_BUDDY may conflict only with
HAVE_HARDLOCKUP_DETECTOR_ARCH. They depend on HARDLOCKUP_DETECTOR
and it is not longer enabled when HAVE_NMI_WATCHDOG is set.

Link: https://lkml.kernel.org/r/20230616150618.6073-5-pmladek@suse.com


Signed-off-by: default avatarPetr Mladek <pmladek@suse.com>
Reviewed-by: default avatarDouglas Anderson <dianders@chromium.org>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
parent 0c68bda6
Loading
Loading
Loading
Loading
+0 −18
Original line number Diff line number Diff line
@@ -400,23 +400,8 @@ config HAVE_HARDLOCKUP_DETECTOR_PERF
	  The arch chooses to use the generic perf-NMI-based hardlockup
	  detector. Must define HAVE_PERF_EVENTS_NMI.

config HAVE_NMI_WATCHDOG
	depends on HAVE_NMI
	bool
	help
	  The arch provides its own hardlockup detector implementation instead
	  of the generic ones.

	  Sparc64 defines this variable without HAVE_HARDLOCKUP_DETECTOR_ARCH.
	  It is the last arch-specific implementation which was developed before
	  adding the common infrastructure for handling hardlockup detectors.
	  It is always built. It does _not_ use the common command line
	  parameters and sysctl interface, except for
	  /proc/sys/kernel/nmi_watchdog.

config HAVE_HARDLOCKUP_DETECTOR_ARCH
	bool
	select HAVE_NMI_WATCHDOG
	help
	  The arch provides its own hardlockup detector implementation instead
	  of the generic ones.
@@ -424,9 +409,6 @@ config HAVE_HARDLOCKUP_DETECTOR_ARCH
	  It uses the same command line parameters, and sysctl interface,
	  as the generic hardlockup detectors.

	  HAVE_NMI_WATCHDOG is selected to build the code shared with
	  the sparc64 specific implementation.

config HAVE_PERF_REGS
	bool
	help
+1 −1
Original line number Diff line number Diff line
@@ -33,7 +33,7 @@ config SPARC
	select ARCH_WANT_IPC_PARSE_VERSION
	select GENERIC_PCI_IOMAP
	select HAS_IOPORT
	select HAVE_NMI_WATCHDOG if SPARC64
	select HAVE_HARDLOCKUP_DETECTOR_SPARC64 if SPARC64
	select HAVE_CBPF_JIT if SPARC32
	select HAVE_EBPF_JIT if SPARC64
	select HAVE_DEBUG_BUGVERBOSE
+9 −0
Original line number Diff line number Diff line
@@ -14,3 +14,12 @@ config FRAME_POINTER
	bool
	depends on MCOUNT
	default y

config HAVE_HARDLOCKUP_DETECTOR_SPARC64
	depends on HAVE_NMI
	bool
	help
	  Sparc64 hardlockup detector is the last one developed before adding
	  the common infrastructure for handling hardlockup detectors. It is
	  always built. It does _not_ use the common command line parameters
	  and sysctl interface, except for /proc/sys/kernel/nmi_watchdog.
+2 −3
Original line number Diff line number Diff line
@@ -9,7 +9,7 @@
#include <asm/irq.h>

/* Arch specific watchdogs might need to share extra watchdog-related APIs. */
#if defined(CONFIG_HAVE_NMI_WATCHDOG)
#if defined(CONFIG_HAVE_HARDLOCKUP_DETECTOR_ARCH) || defined(CONFIG_HAVE_HARDLOCKUP_DETECTOR_SPARC64)
#include <asm/nmi.h>
#endif

@@ -90,8 +90,7 @@ static inline void hardlockup_detector_disable(void) {}
#endif

/* Sparc64 has special implemetantion that is always enabled. */
#if defined(CONFIG_HARDLOCKUP_DETECTOR) || \
    (defined(CONFIG_HAVE_NMI_WATCHDOG) && !defined(CONFIG_HAVE_HARDLOCKUP_DETECTOR_ARCH))
#if defined(CONFIG_HARDLOCKUP_DETECTOR) || defined(CONFIG_HAVE_HARDLOCKUP_DETECTOR_SPARC64)
void arch_touch_nmi_watchdog(void);
#else
static inline void arch_touch_nmi_watchdog(void) { }
+1 −1
Original line number Diff line number Diff line
@@ -29,7 +29,7 @@

static DEFINE_MUTEX(watchdog_mutex);

#if defined(CONFIG_HARDLOCKUP_DETECTOR) || defined(CONFIG_HAVE_NMI_WATCHDOG)
#if defined(CONFIG_HARDLOCKUP_DETECTOR) || defined(CONFIG_HAVE_HARDLOCKUP_DETECTOR_SPARC64)
# define WATCHDOG_HARDLOCKUP_DEFAULT	1
#else
# define WATCHDOG_HARDLOCKUP_DEFAULT	0
Loading