Commit a81dbd04 authored by Stefan Eichenberger's avatar Stefan Eichenberger Committed by Greg Kroah-Hartman
Browse files

serial: imx: set receiver level before starting uart 



Set the receiver level to something > 0 before calling imx_uart_start_rx
in rs485_config. This is necessary to avoid an interrupt storm that
might prevent the system from booting. This was seen on an i.MX7 device
when the rs485-rts-active-low property was active in the device tree.

Fixes: 6d215f83 ("serial: imx: warn user when using unsupported configuration")
Cc: stable <stable@kernel.org>
Signed-off-by: default avatarStefan Eichenberger <stefan.eichenberger@toradex.com>
Link: https://lore.kernel.org/r/20240621153829.183780-1-eichest@gmail.com


Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 7c92a8bd

drivers/tty/serial/imx.c

+3 −1
Original line number Diff line number Diff line
@@ -1952,8 +1952,10 @@ static int imx_uart_rs485_config(struct uart_port *port, struct ktermios *termio 


	/* Make sure Rx is enabled in case Tx is active with Rx disabled */

	if (!(rs485conf->flags & SER_RS485_ENABLED) ||

	    rs485conf->flags & SER_RS485_RX_DURING_TX)

	    rs485conf->flags & SER_RS485_RX_DURING_TX) {

		imx_uart_setup_ufcr(sport, TXTL_DEFAULT, RXTL_DEFAULT);

		imx_uart_start_rx(port);

	}



	return 0;

}