Commit aadfbdcf authored by Sebastian Reichel's avatar Sebastian Reichel Committed by Heiko Stuebner
Browse files

arm64: dts: rockchip: move rock 5b to include file 



Radxa released some more boards, which are based on the original
Rock 5B. Move its board description into an include file to avoid
unnecessary duplication.

Signed-off-by: default avatarSebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20250508-rock5bp-for-upstream-v2-1-677033cc1ac2@kernel.org
Link: https://lore.kernel.org/r/20250508-rock5bp-for-upstream-v2-2-677033cc1ac2@kernel.org



[The original submission was split into two elements, renaming the file
 and then moving some nodes around. This was done to make review easier
 due to the diff being smaller. This commit is a squash of both of them
 to facilitate bisectability and was also intended by the original author]
Signed-off-by: default avatarHeiko Stuebner <heiko@sntech.de>
parent 2435fca0

arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts

+10 −943
Original line number Diff line number Diff line
@@ -2,532 +2,11 @@ 


/dts-v1/;



#include <dt-bindings/gpio/gpio.h>

#include <dt-bindings/leds/common.h>

#include <dt-bindings/soc/rockchip,vop2.h>

#include "rk3588.dtsi"

#include "rk3588-rock-5b.dtsi"



/ {

	model = "Radxa ROCK 5B";

	compatible = "radxa,rock-5b", "rockchip,rk3588";



	aliases {

		mmc0 = &sdhci;

		mmc1 = &sdmmc;

		mmc2 = &sdio;

	};



	chosen {

		stdout-path = "serial2:1500000n8";

	};



	analog-sound {

		compatible = "audio-graph-card";

		label = "rk3588-es8316";



		widgets = "Microphone", "Mic Jack",

			  "Headphone", "Headphones";



		routing = "MIC2", "Mic Jack",

			  "Headphones", "HPOL",

			  "Headphones", "HPOR";



		dais = <&i2s0_8ch_p0>;

		hp-det-gpios = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>;

		pinctrl-names = "default";

		pinctrl-0 = <&hp_detect>;

	};



	hdmi0-con {

		compatible = "hdmi-connector";

		type = "a";



		port {

			hdmi0_con_in: endpoint {

				remote-endpoint = <&hdmi0_out_con>;

			};

		};

	};



	hdmi1-con {

		compatible = "hdmi-connector";

		type = "a";



		port {

			hdmi1_con_in: endpoint {

				remote-endpoint = <&hdmi1_out_con>;

			};

		};

	};



	leds {

		compatible = "gpio-leds";

		pinctrl-names = "default";

		pinctrl-0 = <&led_rgb_b>;



		led_rgb_b {

			function = LED_FUNCTION_STATUS;

			color = <LED_COLOR_ID_BLUE>;

			gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;

			linux,default-trigger = "heartbeat";

		};

	};



	fan: pwm-fan {

		compatible = "pwm-fan";

		cooling-levels = <0 120 150 180 210 240 255>;

		fan-supply = <&vcc5v0_sys>;

		pwms = <&pwm1 0 50000 0>;

		#cooling-cells = <2>;

	};



	rfkill {

		compatible = "rfkill-gpio";

		label = "rfkill-m2-wlan";

		radio-type = "wlan";

		shutdown-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;

	};



	rfkill-bt {

		compatible = "rfkill-gpio";

		label = "rfkill-m2-bt";

		radio-type = "bluetooth";

		shutdown-gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>;

	};



	vcc3v3_pcie2x1l0: regulator-vcc3v3-pcie2x1l0 {

		compatible = "regulator-fixed";

		enable-active-high;

		gpios = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;

		pinctrl-names = "default";

		pinctrl-0 = <&pcie2_0_vcc3v3_en>;

		regulator-name = "vcc3v3_pcie2x1l0";

		regulator-always-on;

		regulator-boot-on;

		regulator-min-microvolt = <3300000>;

		regulator-max-microvolt = <3300000>;

		startup-delay-us = <50000>;

		vin-supply = <&vcc5v0_sys>;

	};



	vcc3v3_pcie2x1l2: regulator-vcc3v3-pcie2x1l2 {

		compatible = "regulator-fixed";

		regulator-name = "vcc3v3_pcie2x1l2";

		regulator-min-microvolt = <3300000>;

		regulator-max-microvolt = <3300000>;

		startup-delay-us = <5000>;

		vin-supply = <&vcc_3v3_s3>;

	};



	vcc3v3_pcie30: regulator-vcc3v3-pcie30 {

		compatible = "regulator-fixed";

		enable-active-high;

		gpios = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>;

		pinctrl-names = "default";

		pinctrl-0 = <&pcie3_vcc3v3_en>;

		regulator-name = "vcc3v3_pcie30";

		regulator-min-microvolt = <3300000>;

		regulator-max-microvolt = <3300000>;

		startup-delay-us = <5000>;

		vin-supply = <&vcc5v0_sys>;

	};



	vcc5v0_host: regulator-vcc5v0-host {

		compatible = "regulator-fixed";

		regulator-name = "vcc5v0_host";

		regulator-boot-on;

		regulator-always-on;

		regulator-min-microvolt = <5000000>;

		regulator-max-microvolt = <5000000>;

		enable-active-high;

		gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;

		pinctrl-names = "default";

		pinctrl-0 = <&vcc5v0_host_en>;

		vin-supply = <&vcc5v0_sys>;

	};



	vcc5v0_sys: regulator-vcc5v0-sys {

		compatible = "regulator-fixed";

		regulator-name = "vcc5v0_sys";

		regulator-always-on;

		regulator-boot-on;

		regulator-min-microvolt = <5000000>;

		regulator-max-microvolt = <5000000>;

	};



	vcc_1v1_nldo_s3: regulator-vcc-1v1-nldo-s3 {

		compatible = "regulator-fixed";

		regulator-name = "vcc_1v1_nldo_s3";

		regulator-always-on;

		regulator-boot-on;

		regulator-min-microvolt = <1100000>;

		regulator-max-microvolt = <1100000>;

		vin-supply = <&vcc5v0_sys>;

	};

};



&combphy0_ps {

	status = "okay";

};



&combphy1_ps {

	status = "okay";

};



&combphy2_psu {

	status = "okay";

};



&cpu_b0 {

	cpu-supply = <&vdd_cpu_big0_s0>;

};



&cpu_b1 {

	cpu-supply = <&vdd_cpu_big0_s0>;

};



&cpu_b2 {

	cpu-supply = <&vdd_cpu_big1_s0>;

};



&cpu_b3 {

	cpu-supply = <&vdd_cpu_big1_s0>;

};



&cpu_l0 {

	cpu-supply = <&vdd_cpu_lit_s0>;

};



&cpu_l1 {

	cpu-supply = <&vdd_cpu_lit_s0>;

};



&cpu_l2 {

	cpu-supply = <&vdd_cpu_lit_s0>;

};



&cpu_l3 {

	cpu-supply = <&vdd_cpu_lit_s0>;

};



&gpu {

	mali-supply = <&vdd_gpu_s0>;

	status = "okay";

};



&hdmi0 {

	status = "okay";

};



&hdmi0_in {

	hdmi0_in_vp0: endpoint {

		remote-endpoint = <&vp0_out_hdmi0>;

	};

};



&hdmi0_out {

	hdmi0_out_con: endpoint {

		remote-endpoint = <&hdmi0_con_in>;

	};

};



&hdmi0_sound {

	status = "okay";

};



&hdmi1 {

	pinctrl-0 = <&hdmim0_tx1_cec &hdmim0_tx1_hpd

		     &hdmim1_tx1_scl &hdmim1_tx1_sda>;

	status = "okay";

};



&hdmi1_in {

	hdmi1_in_vp1: endpoint {

		remote-endpoint = <&vp1_out_hdmi1>;

	};

};



&hdmi1_out {

	hdmi1_out_con: endpoint {

		remote-endpoint = <&hdmi1_con_in>;

	};

};



&hdmi1_sound {

	status = "okay";

};



&hdmi_receiver_cma {

	status = "okay";

};



&hdmi_receiver {

	hpd-gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_LOW>;

	pinctrl-0 = <&hdmim1_rx_cec &hdmim1_rx_hpdin &hdmim1_rx_scl &hdmim1_rx_sda &hdmirx_hpd>;

	pinctrl-names = "default";

	status = "okay";

};



&hdptxphy0 {

	status = "okay";

};



&hdptxphy1 {

	status = "okay";

};



&i2c0 {

	pinctrl-names = "default";

	pinctrl-0 = <&i2c0m2_xfer>;

	status = "okay";



	vdd_cpu_big0_s0: regulator@42 {

		compatible = "rockchip,rk8602";

		reg = <0x42>;

		fcs,suspend-voltage-selector = <1>;

		regulator-name = "vdd_cpu_big0_s0";

		regulator-always-on;

		regulator-boot-on;

		regulator-min-microvolt = <550000>;

		regulator-max-microvolt = <1050000>;

		regulator-ramp-delay = <2300>;

		vin-supply = <&vcc5v0_sys>;



		regulator-state-mem {

			regulator-off-in-suspend;

		};

	};



	vdd_cpu_big1_s0: regulator@43 {

		compatible = "rockchip,rk8603", "rockchip,rk8602";

		reg = <0x43>;

		fcs,suspend-voltage-selector = <1>;

		regulator-name = "vdd_cpu_big1_s0";

		regulator-always-on;

		regulator-boot-on;

		regulator-min-microvolt = <550000>;

		regulator-max-microvolt = <1050000>;

		regulator-ramp-delay = <2300>;

		vin-supply = <&vcc5v0_sys>;



		regulator-state-mem {

			regulator-off-in-suspend;

		};

	};

};



&i2c6 {

	status = "okay";



	hym8563: rtc@51 {

		compatible = "haoyu,hym8563";

		reg = <0x51>;

		#clock-cells = <0>;

		clock-output-names = "hym8563";

		pinctrl-names = "default";

		pinctrl-0 = <&hym8563_int>;

		interrupt-parent = <&gpio0>;

		interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;

		wakeup-source;

	};

};



&i2c7 {

	status = "okay";



	es8316: audio-codec@11 {

		compatible = "everest,es8316";

		reg = <0x11>;

		clocks = <&cru I2S0_8CH_MCLKOUT>;

		clock-names = "mclk";

		assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;

		assigned-clock-rates = <12288000>;

		#sound-dai-cells = <0>;



		port {

			es8316_p0_0: endpoint {

				remote-endpoint = <&i2s0_8ch_p0_0>;

			};

		};

	};

};



&i2s0_8ch {

	pinctrl-names = "default";

	pinctrl-0 = <&i2s0_lrck

		     &i2s0_mclk

		     &i2s0_sclk

		     &i2s0_sdi0

		     &i2s0_sdo0>;

	status = "okay";



	i2s0_8ch_p0: port {

		i2s0_8ch_p0_0: endpoint {

			dai-format = "i2s";

			mclk-fs = <256>;

			remote-endpoint = <&es8316_p0_0>;

		};

	};

};



&i2s5_8ch {

	status = "okay";

};



&i2s6_8ch {

	status = "okay";

};



&package_thermal {

	polling-delay = <1000>;



	trips {

		package_fan0: package-fan0 {

			temperature = <55000>;

			hysteresis = <2000>;

			type = "active";

		};



		package_fan1: package-fan1 {

			temperature = <65000>;

			hysteresis = <2000>;

			type = "active";

		};

	};



	cooling-maps {

		map0 {

			trip = <&package_fan0>;

			cooling-device = <&fan THERMAL_NO_LIMIT 1>;

		};



		map1 {

			trip = <&package_fan1>;

			cooling-device = <&fan 2 THERMAL_NO_LIMIT>;

		};

	};

};



&pcie2x1l0 {

	pinctrl-names = "default";

	pinctrl-0 = <&pcie2_0_rst>;

	reset-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>;

	vpcie3v3-supply = <&vcc3v3_pcie2x1l0>;

	status = "okay";

};



&pcie2x1l2 {

	pinctrl-names = "default";

	pinctrl-0 = <&pcie2_2_rst>;

	reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_HIGH>;

	vpcie3v3-supply = <&vcc3v3_pcie2x1l2>;

	status = "okay";

};



&pcie30phy {

	status = "okay";

};



&pcie3x4 {

	pinctrl-names = "default";

	pinctrl-0 = <&pcie3_rst>;

	reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;

	vpcie3v3-supply = <&vcc3v3_pcie30>;

	status = "okay";

};



&pd_gpu {

	domain-supply = <&vdd_gpu_s0>;

};



&pinctrl {

	hdmirx {

		hdmirx_hpd: hdmirx-5v-detection {

			rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;

		};

	};



	hym8563 {

		hym8563_int: hym8563-int {

			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;

		};

	};



	leds {

		led_rgb_b: led-rgb-b {

			rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;

		};

	};



	sound {

		hp_detect: hp-detect {

			rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;

		};

	};



	pcie2 {

		pcie2_0_rst: pcie2-0-rst {

			rockchip,pins = <4 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;

		};



		pcie2_0_vcc3v3_en: pcie2-0-vcc-en {

			rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;

		};



		pcie2_2_rst: pcie2-2-rst {

			rockchip,pins = <3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;

		};

	};



	pcie3 {

		pcie3_rst: pcie3-rst {

			rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;

		};



		pcie3_vcc3v3_en: pcie3-vcc3v3-en {

			rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;

		};

	};



	usb {

		vcc5v0_host_en: vcc5v0-host-en {

			rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;

		};

	};

};



&pwm1 {

	status = "okay";

};



&saradc {

	vref-supply = <&avcc_1v8_s0>;

	status = "okay";

};



&sdhci {

	bus-width = <8>;

	no-sdio;

	no-sd;

	non-removable;

	mmc-hs400-1_8v;

	mmc-hs400-enhanced-strobe;

	status = "okay";

};



&sdmmc {

	max-frequency = <200000000>;

	no-sdio;

	no-mmc;

	bus-width = <4>;

	cap-mmc-highspeed;

	cap-sd-highspeed;

	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;

	disable-wp;

	sd-uhs-sdr104;

	vmmc-supply = <&vcc_3v3_s3>;

	vqmmc-supply = <&vccio_sd_s0>;

	status = "okay";

};



&sdio {
@@ -551,435 +30,23 @@ &sdio { 
	status = "okay";

};



&sfc {

	pinctrl-names = "default";

	pinctrl-0 = <&fspim2_pins>;

	status = "okay";



	flash@0 {

		compatible = "jedec,spi-nor";

		reg = <0>;

		spi-max-frequency = <104000000>;

		spi-rx-bus-width = <4>;

		spi-tx-bus-width = <1>;

		vcc-supply = <&vcc_3v3_s3>;

	};

};



&uart6 {

	pinctrl-names = "default";

	pinctrl-0 = <&uart6m1_xfer &uart6m1_ctsn &uart6m1_rtsn>;

	status = "okay";

};



&spi2 {

	status = "okay";

	assigned-clocks = <&cru CLK_SPI2>;

	assigned-clock-rates = <200000000>;

	pinctrl-names = "default";

	pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;

	num-cs = <1>;



	pmic@0 {

		compatible = "rockchip,rk806";

		spi-max-frequency = <1000000>;

		reg = <0x0>;



		interrupt-parent = <&gpio0>;

		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;



		pinctrl-names = "default";

		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,

			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;



		system-power-controller;



		vcc1-supply = <&vcc5v0_sys>;

		vcc2-supply = <&vcc5v0_sys>;

		vcc3-supply = <&vcc5v0_sys>;

		vcc4-supply = <&vcc5v0_sys>;

		vcc5-supply = <&vcc5v0_sys>;

		vcc6-supply = <&vcc5v0_sys>;

		vcc7-supply = <&vcc5v0_sys>;

		vcc8-supply = <&vcc5v0_sys>;

		vcc9-supply = <&vcc5v0_sys>;

		vcc10-supply = <&vcc5v0_sys>;

		vcc11-supply = <&vcc_2v0_pldo_s3>;

		vcc12-supply = <&vcc5v0_sys>;

		vcc13-supply = <&vcc_1v1_nldo_s3>;

		vcc14-supply = <&vcc_1v1_nldo_s3>;

		vcca-supply = <&vcc5v0_sys>;



		gpio-controller;

		#gpio-cells = <2>;



		rk806_dvs1_null: dvs1-null-pins {

			pins = "gpio_pwrctrl1";

			function = "pin_fun0";

		};



		rk806_dvs2_null: dvs2-null-pins {

			pins = "gpio_pwrctrl2";

			function = "pin_fun0";

		};



		rk806_dvs3_null: dvs3-null-pins {

			pins = "gpio_pwrctrl3";

			function = "pin_fun0";

		};



		regulators {

			vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {

				regulator-boot-on;

				regulator-min-microvolt = <550000>;

				regulator-max-microvolt = <950000>;

				regulator-ramp-delay = <12500>;

				regulator-name = "vdd_gpu_s0";

				regulator-enable-ramp-delay = <400>;



				regulator-state-mem {

					regulator-off-in-suspend;

				};

			};



			vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {

				regulator-always-on;

				regulator-boot-on;

				regulator-min-microvolt = <550000>;

				regulator-max-microvolt = <950000>;

				regulator-ramp-delay = <12500>;

				regulator-name = "vdd_cpu_lit_s0";



				regulator-state-mem {

					regulator-off-in-suspend;

				};

			};



			vdd_log_s0: dcdc-reg3 {

				regulator-always-on;

				regulator-boot-on;

				regulator-min-microvolt = <675000>;

				regulator-max-microvolt = <750000>;

				regulator-ramp-delay = <12500>;

				regulator-name = "vdd_log_s0";



				regulator-state-mem {

					regulator-off-in-suspend;

					regulator-suspend-microvolt = <750000>;

				};

			};



			vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {

				regulator-always-on;

				regulator-boot-on;

				regulator-min-microvolt = <550000>;

				regulator-max-microvolt = <950000>;

				regulator-ramp-delay = <12500>;

				regulator-name = "vdd_vdenc_s0";



				regulator-state-mem {

					regulator-off-in-suspend;

				};

			};



			vdd_ddr_s0: dcdc-reg5 {

				regulator-always-on;

				regulator-boot-on;

				regulator-min-microvolt = <675000>;

				regulator-max-microvolt = <900000>;

				regulator-ramp-delay = <12500>;

				regulator-name = "vdd_ddr_s0";



				regulator-state-mem {

					regulator-off-in-suspend;

					regulator-suspend-microvolt = <850000>;

				};

			};



			vdd2_ddr_s3: dcdc-reg6 {

				regulator-always-on;

				regulator-boot-on;

				regulator-name = "vdd2_ddr_s3";



				regulator-state-mem {

					regulator-on-in-suspend;

				};

			};



			vcc_2v0_pldo_s3: dcdc-reg7 {

				regulator-always-on;

				regulator-boot-on;

				regulator-min-microvolt = <2000000>;

				regulator-max-microvolt = <2000000>;

				regulator-ramp-delay = <12500>;

				regulator-name = "vdd_2v0_pldo_s3";



				regulator-state-mem {

					regulator-on-in-suspend;

					regulator-suspend-microvolt = <2000000>;

				};

			};



			vcc_3v3_s3: dcdc-reg8 {

				regulator-always-on;

				regulator-boot-on;

				regulator-min-microvolt = <3300000>;

				regulator-max-microvolt = <3300000>;

				regulator-name = "vcc_3v3_s3";



				regulator-state-mem {

					regulator-on-in-suspend;

					regulator-suspend-microvolt = <3300000>;

				};

			};



			vddq_ddr_s0: dcdc-reg9 {

				regulator-always-on;

				regulator-boot-on;

				regulator-name = "vddq_ddr_s0";



				regulator-state-mem {

					regulator-off-in-suspend;

				};

			};



			vcc_1v8_s3: dcdc-reg10 {

				regulator-always-on;

				regulator-boot-on;

				regulator-min-microvolt = <1800000>;

				regulator-max-microvolt = <1800000>;

				regulator-name = "vcc_1v8_s3";



				regulator-state-mem {

					regulator-on-in-suspend;

					regulator-suspend-microvolt = <1800000>;

				};

			};



			avcc_1v8_s0: pldo-reg1 {

				regulator-always-on;

				regulator-boot-on;

				regulator-min-microvolt = <1800000>;

				regulator-max-microvolt = <1800000>;

				regulator-name = "avcc_1v8_s0";



				regulator-state-mem {

					regulator-off-in-suspend;

				};

			};



			vcc_1v8_s0: pldo-reg2 {

				regulator-always-on;

				regulator-boot-on;

				regulator-min-microvolt = <1800000>;

				regulator-max-microvolt = <1800000>;

				regulator-name = "vcc_1v8_s0";



				regulator-state-mem {

					regulator-off-in-suspend;

					regulator-suspend-microvolt = <1800000>;

				};

			};



			avdd_1v2_s0: pldo-reg3 {

				regulator-always-on;

				regulator-boot-on;

				regulator-min-microvolt = <1200000>;

				regulator-max-microvolt = <1200000>;

				regulator-name = "avdd_1v2_s0";



				regulator-state-mem {

					regulator-off-in-suspend;

				};

			};



			vcc_3v3_s0: pldo-reg4 {

				regulator-always-on;

				regulator-boot-on;

				regulator-min-microvolt = <3300000>;

				regulator-max-microvolt = <3300000>;

				regulator-ramp-delay = <12500>;

				regulator-name = "vcc_3v3_s0";



				regulator-state-mem {

					regulator-off-in-suspend;

				};

			};



			vccio_sd_s0: pldo-reg5 {

				regulator-always-on;

				regulator-boot-on;

				regulator-min-microvolt = <1800000>;

				regulator-max-microvolt = <3300000>;

				regulator-ramp-delay = <12500>;

				regulator-name = "vccio_sd_s0";



				regulator-state-mem {

					regulator-off-in-suspend;

				};

			};



			pldo6_s3: pldo-reg6 {

				regulator-always-on;

				regulator-boot-on;

				regulator-min-microvolt = <1800000>;

				regulator-max-microvolt = <1800000>;

				regulator-name = "pldo6_s3";



				regulator-state-mem {

					regulator-on-in-suspend;

					regulator-suspend-microvolt = <1800000>;

				};

			};



			vdd_0v75_s3: nldo-reg1 {

				regulator-always-on;

				regulator-boot-on;

				regulator-min-microvolt = <750000>;

				regulator-max-microvolt = <750000>;

				regulator-name = "vdd_0v75_s3";



				regulator-state-mem {

					regulator-on-in-suspend;

					regulator-suspend-microvolt = <750000>;

				};

			};



			vdd_ddr_pll_s0: nldo-reg2 {

				regulator-always-on;

				regulator-boot-on;

				regulator-min-microvolt = <850000>;

				regulator-max-microvolt = <850000>;

				regulator-name = "vdd_ddr_pll_s0";



				regulator-state-mem {

					regulator-off-in-suspend;

					regulator-suspend-microvolt = <850000>;

				};

			};



			avdd_0v75_s0: nldo-reg3 {

				regulator-always-on;

				regulator-boot-on;

				regulator-min-microvolt = <750000>;

				regulator-max-microvolt = <750000>;

				regulator-name = "avdd_0v75_s0";



				regulator-state-mem {

					regulator-off-in-suspend;

				};

			};



			vdd_0v85_s0: nldo-reg4 {

				regulator-always-on;

				regulator-boot-on;

				regulator-min-microvolt = <850000>;

				regulator-max-microvolt = <850000>;

				regulator-name = "vdd_0v85_s0";



				regulator-state-mem {

					regulator-off-in-suspend;

				};

			};



			vdd_0v75_s0: nldo-reg5 {

				regulator-always-on;

				regulator-boot-on;

				regulator-min-microvolt = <750000>;

				regulator-max-microvolt = <750000>;

				regulator-name = "vdd_0v75_s0";



				regulator-state-mem {

					regulator-off-in-suspend;

				};

			};

		};

	};

};



&tsadc {

	status = "okay";

};



&uart2 {

	pinctrl-0 = <&uart2m0_xfer>;

	status = "okay";

};



&u2phy1 {

	status = "okay";

};



&u2phy1_otg {

	status = "okay";

};



&u2phy2 {

	status = "okay";

};



&u2phy2_host {

	/* connected to USB hub, which is powered by vcc5v0_sys */

	phy-supply = <&vcc5v0_sys>;

	status = "okay";

};



&u2phy3 {

	status = "okay";

};



&u2phy3_host {

	phy-supply = <&vcc5v0_host>;

	status = "okay";

};



&usbdp_phy1 {

	status = "okay";

};



&usb_host0_ehci {

	status = "okay";

};



&usb_host0_ohci {

	status = "okay";

};



&usb_host1_ehci {

	status = "okay";

};



&usb_host1_ohci {

	status = "okay";

};



&usb_host1_xhci {

	dr_mode = "host";

	status = "okay";

};



&usb_host2_xhci {

	status = "okay";

};



&vop {

	status = "okay";

};



&vop_mmu {

	status = "okay";

&pinctrl {

	usb {

		vcc5v0_host_en: vcc5v0-host-en {

			rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;

		};



&vp0 {

	vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {

		reg = <ROCKCHIP_VOP2_EP_HDMI0>;

		remote-endpoint = <&hdmi0_in_vp0>;

	};

};



&vp1 {

	vp1_out_hdmi1: endpoint@ROCKCHIP_VOP2_EP_HDMI1 {

		reg = <ROCKCHIP_VOP2_EP_HDMI1>;

		remote-endpoint = <&hdmi1_in_vp1>;

	};

&vcc5v0_host {

	enable-active-high;

	gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;

	pinctrl-names = "default";

	pinctrl-0 = <&vcc5v0_host_en>;

};

arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dtsi

0 → 100644
+945 −0

File added.

Preview size limit exceeded, changes collapsed.