Commit ac838e45 authored by Beleswar Padhi's avatar Beleswar Padhi Committed by Nishanth Menon
Browse files

arm64: dts: ti: k3-am62p-j722s-common-main: Add HSM M4F node 



The TI K3 AM62P and J722S SoCs have a HSM (High Security Module) M4F
core in the MAIN Voltage Domain which could be used to run secure
services like Authentication. Add Device Tree Node definitions for the
HSM core in the respective SoC common main dtsi file.

The HSM node is reserved to be loaded and booted by the early-stage
bootloader. The firmware-name property is defined at the SoC level
since the HSM is not a general-purpose remote core and boards are
unlikely to use separate firmware. If needed in exceptional cases,
board-specific device trees can override this property.

The corresponding reg ranges of HSM node has also been added to its
parent node's (cbass_main bus) ranges property.

Signed-off-by: default avatarBeleswar Padhi <b-padhi@ti.com>
Reviewed-by: default avatarUdit Kumar <u-kumar1@ti.com>
Reviewed-by: default avatarBryan Brattlof <bb@ti.com>
Link: https://patch.msgid.link/20260114173551.2545088-3-b-padhi@ti.com


Signed-off-by: default avatarNishanth Menon <nm@ti.com>
parent 474530ef

arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi

+17 −0
Original line number Diff line number Diff line
@@ -1117,4 +1117,21 @@ vpu: video-codec@30210000 { 
		clocks = <&k3_clks 204 2>;

		power-domains = <&k3_pds 204 TI_SCI_PD_EXCLUSIVE>;

	};



	hsm: remoteproc@43c00000 {

		compatible = "ti,hsm-m4fss";

		/* contiguous regions but instantiated separately in HW */

		reg = <0x00 0x43c00000 0x00 0x20000>,

		      <0x00 0x43c20000 0x00 0x10000>,

		      <0x00 0x43c30000 0x00 0x10000>;

		reg-names = "sram0_0", "sram0_1", "sram1";

		resets = <&k3_reset 225 1>;

		firmware-name = "am62p-hsm-m4f-fw";

		bootph-pre-ram;

		ti,sci = <&dmsc>;

		ti,sci-dev-id = <225>;

		ti,sci-proc-ids = <0x80 0xff>;

		/* reserved for early-stage bootloader */

		status = "reserved";

	};

};

arch/arm64/boot/dts/ti/k3-am62p.dtsi

+1 −0
Original line number Diff line number Diff line
@@ -96,6 +96,7 @@ cbass_main: bus@f0000 { 
			 <0x00 0x31100000 0x00 0x31100000 0x00 0x00050000>, /* USB1 DWC3 Core window */

			 <0x00 0x40900000 0x00 0x40900000 0x00 0x00030000>, /* SA3UL */

			 <0x00 0x43600000 0x00 0x43600000 0x00 0x00010000>, /* SA3 sproxy data */

			 <0x00 0x43c00000 0x00 0x43c00000 0x00 0x00040000>, /* HSM SRAM ranges */

			 <0x00 0x44043000 0x00 0x44043000 0x00 0x00000fe0>, /* TI SCI DEBUG */

			 <0x00 0x44860000 0x00 0x44860000 0x00 0x00040000>, /* SA3 sproxy config */

			 <0x00 0x48000000 0x00 0x48000000 0x00 0x06408000>, /* DMSS */

arch/arm64/boot/dts/ti/k3-j722s-main.dtsi

+5 −0
Original line number Diff line number Diff line
@@ -429,6 +429,11 @@ &wkup_r5fss0_core0 { 
	firmware-name = "j722s-wkup-r5f0_0-fw";

};



/* MAIN domain overrides */

&hsm {

	firmware-name = "j722s-hsm-m4f-fw";

};



&main_conf {

	serdes_ln_ctrl: mux-controller@4080 {

		compatible = "reg-mux";

arch/arm64/boot/dts/ti/k3-j722s.dtsi

+1 −0
Original line number Diff line number Diff line
@@ -173,6 +173,7 @@ cbass_main: bus@f0000 { 
			 <0x00 0x31200000 0x00 0x31200000 0x00 0x00040000>, /* USB1 DWC3 Core window */

			 <0x00 0x40900000 0x00 0x40900000 0x00 0x00030000>, /* SA3UL */

			 <0x00 0x43600000 0x00 0x43600000 0x00 0x00010000>, /* SA3 sproxy data */

			 <0x00 0x43c00000 0x00 0x43c00000 0x00 0x00040000>, /* HSM SRAM ranges */

			 <0x00 0x44043000 0x00 0x44043000 0x00 0x00000fe0>, /* TI SCI DEBUG */

			 <0x00 0x44860000 0x00 0x44860000 0x00 0x00040000>, /* SA3 sproxy config */

			 <0x00 0x48000000 0x00 0x48000000 0x00 0x06408000>, /* DMSS */