Commit b912e48b authored by Jun Yan's avatar Jun Yan Committed by Chen-Yu Tsai
Browse files

arm64: dts: allwinner: h6: Add TaiqiCat (TQC) A01 support 

TaiqiCat (TQC) A01 is a set-top box powered by an Allwinner H6 SoC,
equipped with an AXP305 PMIC, 1GB LPDDR3 RAM, 8GB eMMC, an AP6212
WiFi/BT combo module, one 100M Ethernet port, one USB 3.0 Type-A port,
one USB 2.0 Type-A port, one Micro USB port, HDMI, SPDIF, Micro-SD, and
infrared input.

It was released by Ultrapower(UQSoft) as a blockchain-based terminal and is
now discontinued and no longer supported.

  https://web.archive.org/web/20190409213228/https://tq.ultrapower.com.cn/product.html

Hardware schematics are not available at this time; however, the
dts from the vendor firmware is provided for reference [1].

Based on the PCB silkscreen marking "AZW-KT02 2.0", the ODM/OEM
can be confirmed as AZW, and the overall hardware circuit design
is highly similar to the Beelink GS1.

Tested, works:
- debug UART
- status LED
- USB 3.0 Type-A port
- USB 2.0 Type-A port
- Micro USB port (Host)
- MicroSD
- eMMC
- WiFi/Bluetooth
- HDMI video output

Does not work:
- Ethernet (requires AC200 MFD/EPHY driver)
- HDMI audio

Untested:
- SPDIF
- IR receiver

[1] https://archive.org/download/tqc-a01-stock-fw/tqc-a01-stock-fw.dts



Signed-off-by: default avatarJun Yan <jerrysteve1101@gmail.com>
Reviewed-by: default avatarAndre Przywara <andre.przywara@arm.com>
Reviewed-by: default avatarJernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20260304073430.438835-4-jerrysteve1101@gmail.com


Signed-off-by: default avatarChen-Yu Tsai <wens@kernel.org>
parent f3208874

arch/arm64/boot/dts/allwinner/Makefile

+1 −0
Original line number Diff line number Diff line
@@ -38,6 +38,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-lite2.dtb 
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-one-plus.dtb

dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64.dtb

dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64-model-b.dtb

dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-taiqicat-a01.dtb

dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6.dtb

dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6-mini.dtb

dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h313-tanix-tx1.dtb

arch/arm64/boot/dts/allwinner/sun50i-h6-taiqicat-a01.dts

0 → 100644
+361 −0
Original line number Diff line number Diff line 
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)

// Copyright (C) 2026 Jun Yan <jerrysteve1101@gmail.com>



/dts-v1/;



#include "sun50i-h6.dtsi"

#include "sun50i-h6-cpu-opp.dtsi"

#include "sun50i-h6-gpu-opp.dtsi"



#include <dt-bindings/gpio/gpio.h>



/ {

	model = "TaiqiCat (TQC) A01";

	compatible = "ultrapower,taiqicat-a01", "allwinner,sun50i-h6";



	aliases {

		ethernet1 = &sdio_wifi;

		serial0 = &uart0;

	};



	chosen {

		stdout-path = "serial0:115200n8";

	};



	connector {

		compatible = "hdmi-connector";

		ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */

		type = "a";



		port {

			hdmi_con_in: endpoint {

				remote-endpoint = <&hdmi_out_con>;

			};

		};

	};



	ext_osc32k: ext-osc32k-clk {

		#clock-cells = <0>;

		compatible = "fixed-clock";

		clock-frequency = <32768>;

		clock-output-names = "ext_osc32k";

	};



	leds {

		compatible = "gpio-leds";



		led-0 {

			label = "taiqicat:blue:power";

			gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */

			default-state = "on";

		};

	};



	reg_vcc5v: vcc5v {

		/* board wide 5V supply directly from the DC jack */

		compatible = "regulator-fixed";

		regulator-name = "vcc-5v";

		regulator-min-microvolt = <5000000>;

		regulator-max-microvolt = <5000000>;

		regulator-always-on;

	};



	sound-spdif {

		compatible = "simple-audio-card";

		simple-audio-card,name = "sun50i-h6-spdif";



		simple-audio-card,cpu {

			sound-dai = <&spdif>;

		};



		simple-audio-card,codec {

			sound-dai = <&spdif_out>;

		};

	};



	spdif_out: spdif-out {

		#sound-dai-cells = <0>;

		compatible = "linux,spdif-dit";

	};



	wifi_pwrseq: wifi-pwrseq {

		compatible = "mmc-pwrseq-simple";

		clocks = <&rtc CLK_OSC32K_FANOUT>;

		clock-names = "ext_clock";

		reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 */

		post-power-on-delay-ms = <200>;

	};

};



&cpu0 {

	cpu-supply = <&reg_dcdca>;

};



&de {

	status = "okay";

};



&dwc3 {

	status = "okay";

};



&ehci0 {

	status = "okay";

};



&ehci3 {

	status = "okay";

};



&gpu {

	mali-supply = <&reg_dcdcc>;

	status = "okay";

};



&hdmi {

	hvcc-supply = <&reg_bldo2>;

	status = "okay";

};



&hdmi_out {

	hdmi_out_con: endpoint {

		remote-endpoint = <&hdmi_con_in>;

	};

};



&mmc0 {

	vmmc-supply = <&reg_cldo1>;

	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */

	bus-width = <4>;

	disable-wp;

	status = "okay";

};



&mmc1 {

	vmmc-supply = <&reg_cldo3>;

	vqmmc-supply = <&reg_bldo3>;

	mmc-pwrseq = <&wifi_pwrseq>;

	bus-width = <4>;

	non-removable;

	keep-power-in-suspend;

	status = "okay";



	sdio_wifi: wifi@1 {

		reg = <1>;

		compatible = "brcm,bcm43430a1-fmac", "brcm,bcm4329-fmac";

		interrupt-parent = <&r_pio>;

		interrupts = <1 0 IRQ_TYPE_LEVEL_LOW>; /* PM0 */

		interrupt-names = "host-wake";

	};

};



&mmc2 {

	vmmc-supply = <&reg_cldo1>;

	vqmmc-supply = <&reg_bldo2>;

	cap-mmc-hw-reset;

	non-removable;

	mmc-hs200-1_8v;

	bus-width = <8>;

	status = "okay";

};



&ohci0 {

	status = "okay";

};



&ohci3 {

	status = "okay";

};



&pio {

	vcc-pc-supply = <&reg_bldo2>;

	vcc-pd-supply = <&reg_cldo1>;

	vcc-pg-supply = <&reg_bldo3>;

};



&r_i2c {

	status = "okay";



	axp805: pmic@36 {

		compatible = "x-powers,axp805", "x-powers,axp806";

		reg = <0x36>;

		interrupt-parent = <&r_intc>;

		interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;

		interrupt-controller;

		#interrupt-cells = <1>;

		x-powers,self-working-mode;

		vina-supply = <&reg_vcc5v>;

		vinb-supply = <&reg_vcc5v>;

		vinc-supply = <&reg_vcc5v>;

		vind-supply = <&reg_vcc5v>;

		vine-supply = <&reg_vcc5v>;

		aldoin-supply = <&reg_vcc5v>;

		bldoin-supply = <&reg_vcc5v>;

		cldoin-supply = <&reg_vcc5v>;



		regulators {

			reg_aldo1: aldo1 {

				regulator-always-on;

				regulator-min-microvolt = <3300000>;

				regulator-max-microvolt = <3300000>;

				regulator-name = "vcc-pl-led-ir-pg-pm-ts";

			};



			reg_aldo2: aldo2 {

				regulator-min-microvolt = <3300000>;

				regulator-max-microvolt = <3300000>;

				regulator-name = "vcc-ac200";

				regulator-enable-ramp-delay = <100000>;

			};



			aldo3 {

				/* unused */

			};



			reg_bldo1: bldo1 {

				regulator-always-on;

				regulator-min-microvolt = <1800000>;

				regulator-max-microvolt = <1800000>;

				regulator-name = "vcc18-dram-bias-pll";

			};



			reg_bldo2: bldo2 {

				regulator-always-on;

				regulator-min-microvolt = <1800000>;

				regulator-max-microvolt = <1800000>;

				regulator-name = "vcc-pc-emmc-efuse-hdmi";

			};



			reg_bldo3: bldo3 {

				regulator-always-on;

				regulator-min-microvolt = <1800000>;

				regulator-max-microvolt = <1800000>;

				regulator-name = "vcc-pg-wifiio";

			};



			bldo4 {

				/* unused */

			};



			reg_cldo1: cldo1 {

				regulator-always-on;

				regulator-min-microvolt = <3300000>;

				regulator-max-microvolt = <3300000>;

				regulator-name = "vcc33-io-pd-emmc-sd-usb-uart";

			};



			/* This regulator is connected with CLDO3 */

			reg_cldo2: cldo2 {

				regulator-always-on;

				regulator-min-microvolt = <3300000>;

				regulator-max-microvolt = <3300000>;

				regulator-name = "vcc-wifi-1";

			};



			reg_cldo3: cldo3 {

				regulator-min-microvolt = <3300000>;

				regulator-max-microvolt = <3300000>;

				regulator-name = "vcc-wifi-2";

			};



			reg_dcdca: dcdca {

				regulator-always-on;

				regulator-min-microvolt = <810000>;

				regulator-max-microvolt = <1160000>;

				regulator-ramp-delay = <2500>;

				regulator-name = "vdd-cpu";

			};



			reg_dcdcc: dcdcc {

				regulator-enable-ramp-delay = <32000>;

				regulator-min-microvolt = <810000>;

				regulator-max-microvolt = <1080000>;

				regulator-ramp-delay = <2500>;

				regulator-name = "vdd-gpu";

			};



			reg_dcdcd: dcdcd {

				regulator-always-on;

				regulator-min-microvolt = <960000>;

				regulator-max-microvolt = <960000>;

				regulator-name = "vdd-sys-hdmi-usb";

			};



			reg_dcdce: dcdce {

				regulator-always-on;

				regulator-min-microvolt = <1200000>;

				regulator-max-microvolt = <1200000>;

				regulator-name = "vcc-dram";

			};



			sw {

				/* unused */

			};

		};

	};

};



&r_ir {

	status = "okay";

};



&r_pio {

	/*

	 * PL0 and PL1 are used for PMIC I2C

	 * don't enable the pl-supply else

	 * it will fail at boot

	 *

	 * vcc-pl-supply = <&reg_aldo1>;

	 */

	vcc-pm-supply = <&reg_aldo1>;

};



&rtc {

	clocks = <&ext_osc32k>;

};



&spdif {

	pinctrl-names = "default";

	pinctrl-0 = <&spdif_tx_pin>;

	status = "okay";

};



&uart0 {

	pinctrl-names = "default";

	pinctrl-0 = <&uart0_ph_pins>;

	status = "okay";

};



&uart1 {

	pinctrl-names = "default";

	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;

	uart-has-rtscts;

	status = "okay";



	bluetooth {

		compatible = "brcm,bcm43430a1-bt";

		clocks = <&rtc CLK_OSC32K_FANOUT>;

		clock-names = "lpo";

		vbat-supply = <&reg_cldo3>;

		vddio-supply = <&reg_bldo3>;

		device-wakeup-gpios = <&r_pio 1 2 GPIO_ACTIVE_HIGH>; /* PM2 */

		host-wakeup-gpios = <&r_pio 1 1 GPIO_ACTIVE_HIGH>; /* PM1 */

		shutdown-gpios = <&r_pio 1 4 GPIO_ACTIVE_HIGH>; /* PM4 */

		max-speed = <1500000>;

	};

};



&usb2otg {

	dr_mode = "host";

	status = "okay";

};



&usb2phy {

	usb0_vbus-supply = <&reg_vcc5v>;

	usb3_vbus-supply = <&reg_vcc5v>;

	status = "okay";

};



&usb3phy {

	status = "okay";

};