Input: remove ec3104_keyb driver (b9198c32) · Commits · git / linux-net

drivers/char/ec3104_keyb.c

deleted100644 → 0

+0 −457

Original line number	Diff line number	Diff line
		/*
		* linux/drivers/char/ec3104_keyb.c
		*
		* Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org>
		*
		* based on linux/drivers/char/pc_keyb.c, which had the following comments:
		*
		* Separation of the PC low-level part by Geert Uytterhoeven, May 1997
		* See keyboard.c for the whole history.
		*
		* Major cleanup by Martin Mares, May 1997
		*
		* Combined the keyboard and PS/2 mouse handling into one file,
		* because they share the same hardware.
		* Johan Myreen <jem@iki.fi> 1998-10-08.
		*
		* Code fixes to handle mouse ACKs properly.
		* C. Scott Ananian <cananian@alumni.princeton.edu> 1999-01-29.
		*/
		/* EC3104 note:
		* This code was written without any documentation about the EC3104 chip. While
		* I hope I got most of the basic functionality right, the register names I use
		* are most likely completely different from those in the chip documentation.
		*
		* If you have any further information about the EC3104, please tell me
		* (prumpf@tux.org).
		*/


		#include <linux/spinlock.h>
		#include <linux/sched.h>
		#include <linux/interrupt.h>
		#include <linux/tty.h>
		#include <linux/mm.h>
		#include <linux/signal.h>
		#include <linux/init.h>
		#include <linux/kbd_ll.h>
		#include <linux/delay.h>
		#include <linux/random.h>
		#include <linux/poll.h>
		#include <linux/miscdevice.h>
		#include <linux/slab.h>
		#include <linux/kbd_kern.h>
		#include <linux/bitops.h>

		#include <asm/keyboard.h>
		#include <asm/uaccess.h>
		#include <asm/irq.h>
		#include <asm/system.h>
		#include <asm/ec3104.h>

		#include <asm/io.h>

		/* Some configuration switches are present in the include file... */

		#include <linux/pc_keyb.h>

		#define MSR_CTS 0x10
		#define MCR_RTS 0x02
		#define LSR_DR 0x01
		#define LSR_BOTH_EMPTY 0x60

		static struct e5_struct {
		u8 packet[8];
		int pos;
		int length;

		u8 cached_mcr;
		u8 last_msr;
		} ec3104_keyb;

		/* Simple translation table for the SysRq keys */


		#ifdef CONFIG_MAGIC_SYSRQ
		unsigned char ec3104_kbd_sysrq_xlate[128] =
		"\000\0331234567890-=\177\t" /* 0x00 - 0x0f */
		"qwertyuiop[]\r\000as" /* 0x10 - 0x1f */
		"dfghjkl;'`\000\\zxcv" /* 0x20 - 0x2f */
		"bnm,./\000\000 \000\201\202\203\204\205" / 0x30 - 0x3f */
		"\206\207\210\211\212\000\000789-456+1" /* 0x40 - 0x4f */
		"230\177\000\000\213\214\000\000\000\000\000\000\000\000\000\000" /* 0x50 - 0x5f */
		"\r\000/"; /* 0x60 - 0x6f */
		#endif

		static void kbd_write_command_w(int data);
		static void kbd_write_output_w(int data);
		#ifdef CONFIG_PSMOUSE
		static void aux_write_ack(int val);
		static void __aux_write_ack(int val);
		#endif

		static DEFINE_SPINLOCK(kbd_controller_lock);
		static unsigned char handle_kbd_event(void);

		/* used only by send_data - set by keyboard_interrupt */
		static volatile unsigned char reply_expected;
		static volatile unsigned char acknowledge;
		static volatile unsigned char resend;


		int ec3104_kbd_setkeycode(unsigned int scancode, unsigned int keycode)
		{
		return 0;
		}

		int ec3104_kbd_getkeycode(unsigned int scancode)
		{
		return 0;
		}


		/* yes, it probably would be faster to use an array. I don't care. */

		static inline unsigned char ec3104_scan2key(unsigned char scancode)
		{
		switch (scancode) {
		case 1: /* '`' */
		return 41;

		case 2 ... 27:
		return scancode;

		case 28: /* '\\' */
		return 43;

		case 29 ... 39:
		return scancode + 1;

		case 40: /* '\r' */
		return 28;

		case 41 ... 50:
		return scancode + 3;

		case 51: /* ' ' */
		return 57;

		case 52: /* escape */
		return 1;

		case 54: /* insert/delete (labelled delete) */
		/* this should arguably be 110, but I'd like to have ctrl-alt-del
		* working with a standard keymap */
		return 111;

		case 55: /* left */
		return 105;
		case 56: /* home */
		return 102;
		case 57: /* end */
		return 107;
		case 58: /* up */
		return 103;
		case 59: /* down */
		return 108;
		case 60: /* pgup */
		return 104;
		case 61: /* pgdown */
		return 109;
		case 62: /* right */
		return 106;

		case 79 ... 88: /* f1 - f10 */
		return scancode - 20;

		case 89 ... 90: /* f11 - f12 */
		return scancode - 2;

		case 91: /* left shift */
		return 42;

		case 92: /* right shift */
		return 54;

		case 93: /* left alt */
		return 56;
		case 94: /* right alt */
		return 100;
		case 95: /* left ctrl */
		return 29;
		case 96: /* right ctrl */
		return 97;

		case 97: /* caps lock */
		return 58;
		case 102: /* left windows */
		return 125;
		case 103: /* right windows */
		return 126;

		case 106: /* Fn */
		/* this is wrong. */
		return 84;

		default:
		return 0;
		}
		}

		int ec3104_kbd_translate(unsigned char scancode, unsigned char *keycode,
		char raw_mode)
		{
		scancode &= 0x7f;

		*keycode = ec3104_scan2key(scancode);

		return 1;
		}

		char ec3104_kbd_unexpected_up(unsigned char keycode)
		{
		return 0200;
		}

		static inline void handle_keyboard_event(unsigned char scancode)
		{
		#ifdef CONFIG_VT
		handle_scancode(scancode, !(scancode & 0x80));
		#endif
		tasklet_schedule(&keyboard_tasklet);
		}

		void ec3104_kbd_leds(unsigned char leds)
		{
		}

		static u8 e5_checksum(u8 *packet, int count)
		{
		int i;
		u8 sum = 0;

		for (i=0; i<count; i++)
		sum ^= packet[i];

		if (sum & 0x80)
		sum ^= 0xc0;

		return sum;
		}

		static void e5_wait_for_cts(struct e5_struct *k)
		{
		u8 msr;

		do {
		msr = ctrl_inb(EC3104_SER4_MSR);
		} while (!(msr & MSR_CTS));
		}


		static void e5_send_byte(u8 byte, struct e5_struct *k)
		{
		u8 status;

		do {
		status = ctrl_inb(EC3104_SER4_LSR);
		} while ((status & LSR_BOTH_EMPTY) != LSR_BOTH_EMPTY);

		printk("<%02x>", byte);

		ctrl_outb(byte, EC3104_SER4_DATA);

		do {
		status = ctrl_inb(EC3104_SER4_LSR);
		} while ((status & LSR_BOTH_EMPTY) != LSR_BOTH_EMPTY);

		}

		static int e5_send_packet(u8 packet, int count, struct e5_struct k)
		{
		int i;

		disable_irq(EC3104_IRQ_SER4);

		if (k->cached_mcr & MCR_RTS) {
		printk("e5_send_packet: too slow\n");
		enable_irq(EC3104_IRQ_SER4);
		return -EAGAIN;
		}

		k->cached_mcr \|= MCR_RTS;
		ctrl_outb(k->cached_mcr, EC3104_SER4_MCR);

		e5_wait_for_cts(k);

		printk("p: ");

		for(i=0; i<count; i++)
		e5_send_byte(packet[i], k);

		e5_send_byte(e5_checksum(packet, count), k);

		printk("\n");

		udelay(1500);

		k->cached_mcr &= ~MCR_RTS;
		ctrl_outb(k->cached_mcr, EC3104_SER4_MCR);

		set_current_state(TASK_UNINTERRUPTIBLE);



		enable_irq(EC3104_IRQ_SER4);



		return 0;
		}

		/*
		* E5 packets we know about:
		* E5->host 0x80 0x05 <checksum> - resend packet
		* host->E5 0x83 0x43 <contrast> - set LCD contrast
		* host->E5 0x85 0x41 0x02 <brightness> 0x02 - set LCD backlight
		* E5->host 0x87 <ps2 packet> 0x00 <checksum> - external PS2
		* E5->host 0x88 <scancode> <checksum> - key press
		*/

		static void e5_receive(struct e5_struct *k)
		{
		k->packet[k->pos++] = ctrl_inb(EC3104_SER4_DATA);

		if (k->pos == 1) {
		switch(k->packet[0]) {
		case 0x80:
		k->length = 3;
		break;

		case 0x87: /* PS2 ext */
		k->length = 6;
		break;

		case 0x88: /* keyboard */
		k->length = 3;
		break;

		default:
		k->length = 1;
		printk(KERN_WARNING "unknown E5 packet %02x\n",
		k->packet[0]);
		}
		}

		if (k->pos == k->length) {
		int i;

		if (e5_checksum(k->packet, k->length) != 0)
		printk(KERN_WARNING "E5: wrong checksum\n");

		#if 0
		printk("E5 packet [");
		for(i=0; i<k->length; i++) {
		printk("%02x ", k->packet[i]);
		}

		printk("(%02x)]\n", e5_checksum(k->packet, k->length-1));
		#endif

		switch(k->packet[0]) {
		case 0x80:
		case 0x88:
		handle_keyboard_event(k->packet[1]);
		break;
		}

		k->pos = k->length = 0;
		}
		}

		static void ec3104_keyb_interrupt(int irq, void *data)
		{
		struct e5_struct *k = &ec3104_keyb;
		u8 msr, lsr;

		msr = ctrl_inb(EC3104_SER4_MSR);

		if ((msr & MSR_CTS) && !(k->last_msr & MSR_CTS)) {
		if (k->cached_mcr & MCR_RTS)
		printk("confused: RTS already high\n");
		/* CTS went high. Send RTS. */
		k->cached_mcr \|= MCR_RTS;

		ctrl_outb(k->cached_mcr, EC3104_SER4_MCR);
		} else if ((!(msr & MSR_CTS)) && (k->last_msr & MSR_CTS)) {
		/* CTS went low. */
		if (!(k->cached_mcr & MCR_RTS))
		printk("confused: RTS already low\n");

		k->cached_mcr &= ~MCR_RTS;

		ctrl_outb(k->cached_mcr, EC3104_SER4_MCR);
		}

		k->last_msr = msr;

		lsr = ctrl_inb(EC3104_SER4_LSR);

		if (lsr & LSR_DR)
		e5_receive(k);
		}

		static void ec3104_keyb_clear_state(void)
		{
		struct e5_struct *k = &ec3104_keyb;
		u8 msr, lsr;

		/* we want CTS to be low */
		k->last_msr = 0;

		for (;;) {
		msleep(100);

		msr = ctrl_inb(EC3104_SER4_MSR);

		lsr = ctrl_inb(EC3104_SER4_LSR);

		if (lsr & LSR_DR) {
		e5_receive(k);
		continue;
		}

		if ((msr & MSR_CTS) && !(k->last_msr & MSR_CTS)) {
		if (k->cached_mcr & MCR_RTS)
		printk("confused: RTS already high\n");
		/* CTS went high. Send RTS. */
		k->cached_mcr \|= MCR_RTS;

		ctrl_outb(k->cached_mcr, EC3104_SER4_MCR);
		} else if ((!(msr & MSR_CTS)) && (k->last_msr & MSR_CTS)) {
		/* CTS went low. */
		if (!(k->cached_mcr & MCR_RTS))
		printk("confused: RTS already low\n");

		k->cached_mcr &= ~MCR_RTS;

		ctrl_outb(k->cached_mcr, EC3104_SER4_MCR);
		} else
		break;

		k->last_msr = msr;

		continue;
		}
		}

		void __init ec3104_kbd_init_hw(void)
		{
		ec3104_keyb.last_msr = ctrl_inb(EC3104_SER4_MSR);
		ec3104_keyb.cached_mcr = ctrl_inb(EC3104_SER4_MCR);

		ec3104_keyb_clear_state();

		/* Ok, finally allocate the IRQ, and off we go.. */
		request_irq(EC3104_IRQ_SER4, ec3104_keyb_interrupt, 0, "keyboard", NULL);
		}