Commit bc6588bc authored by Dmitry Baryshkov's avatar Dmitry Baryshkov Committed by Bjorn Andersson
Browse files

arm64: dts: qcom: sm8450: add PCIe1 root device 



Add device tree node for the second PCIe host found on the Qualcomm
SM8450 platform.

Signed-off-by: default avatarDmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: default avatarBjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220301061500.2110569-5-dmitry.baryshkov@linaro.org
parent 334d91d2

arch/arm64/boot/dts/qcom/sm8450.dtsi

+96 −0
Original line number Diff line number Diff line
@@ -865,6 +865,79 @@ pcie0_lane: lanes@1c06200 { 
			};

		};



		pcie1: pci@1c08000 {

			compatible = "qcom,pcie-sm8450-pcie1";

			reg = <0 0x01c08000 0 0x3000>,

			      <0 0x40000000 0 0xf1d>,

			      <0 0x40000f20 0 0xa8>,

			      <0 0x40001000 0 0x1000>,

			      <0 0x40100000 0 0x100000>;

			reg-names = "parf", "dbi", "elbi", "atu", "config";

			device_type = "pci";

			linux,pci-domain = <1>;

			bus-range = <0x00 0xff>;

			num-lanes = <2>;



			#address-cells = <3>;

			#size-cells = <2>;



			ranges = <0x01000000 0x0 0x40200000 0 0x40200000 0x0 0x100000>,

				 <0x02000000 0x0 0x40300000 0 0x40300000 0x0 0x1fd00000>;



			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;

			interrupt-names = "msi";

			#interrupt-cells = <1>;

			interrupt-map-mask = <0 0 0 0x7>;

			interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */

					<0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */

					<0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */

					<0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */



			clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,

				 <&gcc GCC_PCIE_1_PIPE_CLK_SRC>,

				 <&pcie1_lane>,

				 <&rpmhcc RPMH_CXO_CLK>,

				 <&gcc GCC_PCIE_1_AUX_CLK>,

				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,

				 <&gcc GCC_PCIE_1_MSTR_AXI_CLK>,

				 <&gcc GCC_PCIE_1_SLV_AXI_CLK>,

				 <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>,

				 <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>,

				 <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>;

			clock-names = "pipe",

				      "pipe_mux",

				      "phy_pipe",

				      "ref",

				      "aux",

				      "cfg",

				      "bus_master",

				      "bus_slave",

				      "slave_q2a",

				      "ddrss_sf_tbu",

				      "aggre1";



			iommus = <&apps_smmu 0x1c80 0x7f>;

			iommu-map = <0x0   &apps_smmu 0x1c80 0x1>,

				    <0x100 &apps_smmu 0x1c81 0x1>;



			resets = <&gcc GCC_PCIE_1_BCR>;

			reset-names = "pci";



			power-domains = <&gcc PCIE_1_GDSC>;

			power-domain-names = "gdsc";



			phys = <&pcie1_lane>;

			phy-names = "pciephy";



			perst-gpio = <&tlmm 97 GPIO_ACTIVE_LOW>;

			enable-gpio = <&tlmm 99 GPIO_ACTIVE_HIGH>;



			pinctrl-names = "default";

			pinctrl-0 = <&pcie1_default_state>;



			status = "disabled";

		};



		pcie1_phy: phy@1c0f000 {

			compatible = "qcom,sm8450-qmp-gen4x2-pcie-phy";

			reg = <0 0x01c0f000 0 0x200>;
@@ -1344,6 +1417,29 @@ wake { 
				};

			};



			pcie1_default_state: pcie1-default-state {

				perst {

					pins = "gpio97";

					function = "gpio";

					drive-strength = <2>;

					bias-pull-down;

				};



				clkreq {

					pins = "gpio98";

					function = "pcie1_clkreqn";

					drive-strength = <2>;

					bias-pull-up;

				};



				wake {

					pins = "gpio99";

					function = "gpio";

					drive-strength = <2>;

					bias-pull-up;

				};

			};



			qup_i2c13_data_clk: qup-i2c13-data-clk {

				pins = "gpio48", "gpio49";

				function = "qup13";