Commit c0c46eea authored by Maud Spierings's avatar Maud Spierings Committed by Bjorn Andersson
Browse files

arm64: dts: qcom: x1e80100-vivobook-s15: Enable USB-A ports 



The asus vivobook has 2 USB type A ports on the right side, enable them

Signed-off-by: default avatarMaud Spierings <maud_spierings@hotmail.com>
Link: https://lore.kernel.org/r/20250119-usb_a_micro_sd-v1-1-01eb7502ae05@hotmail.com


Signed-off-by: default avatarBjorn Andersson <andersson@kernel.org>
parent 4bf9fac3

arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts

+102 −1
Original line number Diff line number Diff line
@@ -192,6 +192,20 @@ vreg_l2b_3p0: ldo2 { 
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};



		vreg_l4b_1p8: ldo4 {

			regulator-name = "vreg_l4b_1p8";

			regulator-min-microvolt = <1800000>;

			regulator-max-microvolt = <1800000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};



		vreg_l13b_3p0: ldo13 {

			regulator-name = "vreg_l13b_3p0";

			regulator-min-microvolt = <3072000>;

			regulator-max-microvolt = <3072000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};



		vreg_l14b_3p0: ldo14 {

			regulator-name = "vreg_l14b_3p0";

			regulator-min-microvolt = <3072000>;
@@ -209,6 +223,13 @@ regulators-1 { 
		vdd-l3-supply = <&vreg_s1f_0p7>;

		vdd-s4-supply = <&vph_pwr>;



		vreg_l3c_0p8: ldo3 {

			regulator-name = "vreg_l3c_0p8";

			regulator-min-microvolt = <912000>;

			regulator-max-microvolt = <912000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};



		vreg_s4c_1p8: smps4 {

			regulator-name = "vreg_s4c_1p8";

			regulator-min-microvolt = <1856000>;
@@ -401,7 +422,35 @@ keyboard@3a { 
		wakeup-source;

	};



	/* EC? @ 0x5b, 0x76 */

	eusb3_repeater: redriver@47 {

		compatible = "nxp,ptn3222";

		reg = <0x47>;

		#phy-cells = <0>;



		vdd3v3-supply = <&vreg_l13b_3p0>;

		vdd1v8-supply = <&vreg_l4b_1p8>;



		reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;



		pinctrl-0 = <&eusb3_reset_n>;

		pinctrl-names = "default";

	};



	eusb6_repeater: redriver@4f {

		compatible = "nxp,ptn3222";

		reg = <0x4f>;

		#phy-cells = <0>;



		vdd3v3-supply = <&vreg_l13b_3p0>;

		vdd1v8-supply = <&vreg_l4b_1p8>;



		reset-gpios = <&tlmm 184 GPIO_ACTIVE_LOW>;



		pinctrl-0 = <&eusb6_reset_n>;

		pinctrl-names = "default";

	};



	/* EC @ 0x76 */

};



&i2c7 {
@@ -563,6 +612,22 @@ edp_reg_en: edp-reg-en-state { 
		bias-disable;

	};



	eusb3_reset_n: eusb3-reset-n-state {

		pins = "gpio6";

		function = "gpio";

		drive-strength = <2>;

		bias-pull-up;

		output-low;

	};



	eusb6_reset_n: eusb6-reset-n-state {

		pins = "gpio184";

		function = "gpio";

		drive-strength = <2>;

		bias-pull-up;

		output-low;

	};



	hall_int_n_default: hall-int-n-state {

		pins = "gpio92";

		function = "gpio";
@@ -698,3 +763,39 @@ &usb_1_ss1_dwc3_hs { 
&usb_1_ss1_qmpphy_out {

	remote-endpoint = <&pmic_glink_ss1_ss_in>;

};



&usb_mp {

	status = "okay";

};



&usb_mp_hsphy0 {

	vdd-supply = <&vreg_l2e_0p8>;

	vdda12-supply = <&vreg_l3e_1p2>;



	phys = <&eusb6_repeater>;



	status = "okay";

};



&usb_mp_hsphy1 {

	vdd-supply = <&vreg_l2e_0p8>;

	vdda12-supply = <&vreg_l3e_1p2>;



	phys = <&eusb3_repeater>;



	status = "okay";

};



&usb_mp_qmpphy0 {

	vdda-phy-supply = <&vreg_l3e_1p2>;

	vdda-pll-supply = <&vreg_l3c_0p8>;



	status = "okay";

};



&usb_mp_qmpphy1 {

	vdda-phy-supply = <&vreg_l3e_1p2>;

	vdda-pll-supply = <&vreg_l3c_0p8>;



	status = "okay";

};