Commit ce872bce authored by Luca Weiss's avatar Luca Weiss Committed by Vinod Koul
Browse files

phy: qualcomm: phy-qcom-eusb2-repeater: Add support for PMIV0104 



Add support for the eUSB2 repeater found on the PMIV0104. There is no
default init table for this PMIC, just the board-specific tuning
parameters are used on top of the default tuning values.

Reviewed-by: default avatarAbel Vesa <abel.vesa@linaro.org>
Reviewed-by: default avatarNeil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: default avatarLuca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20250709-sm7635-eusb-repeater-v2-4-b6eff075c097@fairphone.com


Signed-off-by: default avatarVinod Koul <vkoul@kernel.org>
parent 5edc4054

drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c

+12 −0
Original line number Diff line number Diff line
@@ -82,6 +82,14 @@ static const struct eusb2_repeater_cfg pm8550b_eusb2_cfg = { 
	.num_vregs	= ARRAY_SIZE(pm8550b_vreg_l),

};



static const struct eusb2_repeater_cfg pmiv0104_eusb2_cfg = {

	/* No PMIC-specific init sequence, only board level tuning via DT */

	.init_tbl	= (struct eusb2_repeater_init_tbl_reg[]) {},

	.init_tbl_num	= 0,

	.vreg_list	= pm8550b_vreg_l,

	.num_vregs	= ARRAY_SIZE(pm8550b_vreg_l),

};



static const struct eusb2_repeater_cfg smb2360_eusb2_cfg = {

	.init_tbl	= smb2360_init_tbl,

	.init_tbl_num	= ARRAY_SIZE(smb2360_init_tbl),
@@ -262,6 +270,10 @@ static const struct of_device_id eusb2_repeater_of_match_table[] = { 
		.compatible = "qcom,pm8550b-eusb2-repeater",

		.data = &pm8550b_eusb2_cfg,

	},

	{

		.compatible = "qcom,pmiv0104-eusb2-repeater",

		.data = &pmiv0104_eusb2_cfg,

	},

	{

		.compatible = "qcom,smb2360-eusb2-repeater",

		.data = &smb2360_eusb2_cfg,