Commit d9ce353a authored by Johannes Tenschert's avatar Johannes Tenschert Committed by Greg Kroah-Hartman
Browse files

staging: bcm: led_control.c: fix parens/braces 



Signed-off-by: default avatarJohannes Tenschert <Johannes.Tenschert@informatik.stud.uni-erlangen.de>
Reviewed-by: default avatarDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent f5d8c26a

drivers/staging/bcm/led_control.c

+87 −208
Original line number Diff line number Diff line
@@ -29,14 +29,11 @@ static INT LED_Blink(PMINI_ADAPTER Adapter, UINT GPIO_Num, UCHAR uiLedIndex, ULO 
	BOOLEAN bInfinite = FALSE;



	/* Check if num_of_time is -ve. If yes, blink led in infinite loop */

	if (num_of_time < 0)

	{

	if (num_of_time < 0) {

		bInfinite = TRUE;

		num_of_time = 1;

	}

	while (num_of_time)

	{



	while (num_of_time) {

		if (currdriverstate == Adapter->DriverState)

			TURN_ON_LED(GPIO_Num, uiLedIndex);
@@ -45,16 +42,14 @@ static INT LED_Blink(PMINI_ADAPTER Adapter, UINT GPIO_Num, UCHAR uiLedIndex, ULO 
					currdriverstate != Adapter->DriverState || kthread_should_stop(),

					msecs_to_jiffies(timeout));



		if (kthread_should_stop())

		{

		if (kthread_should_stop()) {

			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "Led thread got signal to exit..hence exiting");

			Adapter->LEDInfo.led_thread_running = BCM_LED_THREAD_DISABLED;

			TURN_OFF_LED(GPIO_Num, uiLedIndex);

			Status = EVENT_SIGNALED;

			break;

		}

		if (Status)

		{

		if (Status) {

			TURN_OFF_LED(GPIO_Num, uiLedIndex);

			Status = EVENT_SIGNALED;

			break;
@@ -116,15 +111,13 @@ static INT LED_Proportional_Blink(PMINI_ADAPTER Adapter, UCHAR GPIO_Num_tx, 
	num_of_time_tx = ScaleRateofTransfer((ULONG)rate_of_transfer_tx);

	num_of_time_rx = ScaleRateofTransfer((ULONG)rate_of_transfer_rx);



	while ((Adapter->device_removed == FALSE))

	{

	while ((Adapter->device_removed == FALSE)) {

		timeout = 50;

		/*

		 * Blink Tx and Rx LED when both Tx and Rx is

		 * in normal bandwidth

		 */

		if (bBlinkBothLED)

		{

		if (bBlinkBothLED) {

			/*

			 * Assign minimum number of blinks of

			 * either Tx or Rx.
@@ -133,79 +126,59 @@ static INT LED_Proportional_Blink(PMINI_ADAPTER Adapter, UCHAR GPIO_Num_tx, 
				num_of_time = num_of_time_rx;

			else

				num_of_time = num_of_time_tx;

			if (num_of_time > 0)

			{

			if (num_of_time > 0) {

				/* Blink both Tx and Rx LEDs */

				if (LED_Blink(Adapter, 1 << GPIO_Num_tx, uiTxLedIndex, timeout, num_of_time, currdriverstate)

							== EVENT_SIGNALED)

				{

					return EVENT_SIGNALED;

				}



				if (LED_Blink(Adapter, 1 << GPIO_Num_rx, uiRxLedIndex, timeout, num_of_time, currdriverstate)

							== EVENT_SIGNALED)

				{

					return EVENT_SIGNALED;

				}



			}



			if (num_of_time == num_of_time_tx)

			{

			if (num_of_time == num_of_time_tx) {

				/* Blink pending rate of Rx */

				if (LED_Blink(Adapter, (1 << GPIO_Num_rx), uiRxLedIndex, timeout,

						num_of_time_rx-num_of_time, currdriverstate) == EVENT_SIGNALED)

				{

					return EVENT_SIGNALED;

				}



				num_of_time = num_of_time_rx;

			}

			else

			{

			} else {

				/* Blink pending rate of Tx */

				if (LED_Blink(Adapter, 1 << GPIO_Num_tx, uiTxLedIndex, timeout,

					num_of_time_tx-num_of_time, currdriverstate) == EVENT_SIGNALED)

				{

					return EVENT_SIGNALED;

				}



				num_of_time = num_of_time_tx;

			}

		}

		else

		{

			if (num_of_time == num_of_time_tx)

			{

		} else {

			if (num_of_time == num_of_time_tx) {

				/* Blink pending rate of Rx */

				if (LED_Blink(Adapter, 1 << GPIO_Num_tx, uiTxLedIndex, timeout, num_of_time, currdriverstate)

							== EVENT_SIGNALED)

				{

					return EVENT_SIGNALED;

				}

			}

			else

			{

			} else {

				/* Blink pending rate of Tx */

				if (LED_Blink(Adapter, 1 << GPIO_Num_rx, uiRxLedIndex, timeout,

						num_of_time, currdriverstate) == EVENT_SIGNALED)

				{

					return EVENT_SIGNALED;

			}

		}

		}



		/*

		 * If Tx/Rx rate is less than maximum blinks per second,

		 * wait till delay completes to 1 second

		 */

		remDelay = MAX_NUM_OF_BLINKS - num_of_time;

		if (remDelay > 0)

		{

		if (remDelay > 0) {

			timeout = 100 * remDelay;

			Status = wait_event_interruptible_timeout(Adapter->LEDInfo.notify_led_event,

						currdriverstate != Adapter->DriverState || kthread_should_stop(),

						msecs_to_jiffies(timeout));



			if (kthread_should_stop())

			{

			if (kthread_should_stop()) {

				BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "Led thread got signal to exit..hence exiting");

				Adapter->LEDInfo.led_thread_running = BCM_LED_THREAD_DISABLED;

				return EVENT_SIGNALED;
@@ -266,16 +239,14 @@ static INT ValidateDSDParamsChecksum(PMINI_ADAPTER Adapter, ULONG ulParamOffset 
	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "LED Thread:ValidateDSDParamsChecksum: 0x%lx 0x%X", ulParamOffset, usParamLen);



	puBuffer = kmalloc(usParamLen, GFP_KERNEL);

	if (!puBuffer)

	{

	if (!puBuffer) {

		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "LED Thread: ValidateDSDParamsChecksum Allocation failed");

		return -ENOMEM;



	}



	/* Read the DSD data from the parameter offset. */

	if (STATUS_SUCCESS != BeceemNVMRead(Adapter, (PUINT)puBuffer, ulParamOffset, usParamLen))

	{

	if (STATUS_SUCCESS != BeceemNVMRead(Adapter, (PUINT)puBuffer, ulParamOffset, usParamLen)) {

		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "LED Thread: ValidateDSDParamsChecksum BeceemNVMRead failed");

		Status = STATUS_IMAGE_CHECKSUM_MISMATCH;

		goto exit;
@@ -289,8 +260,7 @@ static INT ValidateDSDParamsChecksum(PMINI_ADAPTER Adapter, ULONG ulParamOffset 
	 * End of the DSD parameter will have a TWO bytes checksum stored in it.

	 * Read it and compare with the calculated Checksum.

	 */

	if (STATUS_SUCCESS != BeceemNVMRead(Adapter, (PUINT)&usChksmOrg, ulParamOffset+usParamLen, 2))

	{

	if (STATUS_SUCCESS != BeceemNVMRead(Adapter, (PUINT)&usChksmOrg, ulParamOffset+usParamLen, 2)) {

		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "LED Thread: ValidateDSDParamsChecksum BeceemNVMRead failed");

		Status = STATUS_IMAGE_CHECKSUM_MISMATCH;

		goto exit;
@@ -302,8 +272,7 @@ static INT ValidateDSDParamsChecksum(PMINI_ADAPTER Adapter, ULONG ulParamOffset 
	 * Compare the checksum calculated with the checksum read

	 * from DSD section

	 */

	if (usChecksumCalculated ^ usChksmOrg)

	{

	if (usChecksumCalculated ^ usChksmOrg) {

		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "LED Thread: ValidateDSDParamsChecksum: Checksums don't match");

		Status = STATUS_IMAGE_CHECKSUM_MISMATCH;

		goto exit;
@@ -345,9 +314,7 @@ static INT ValidateHWParmStructure(PMINI_ADAPTER Adapter, ULONG ulHwParamOffset) 
	BeceemNVMRead(Adapter, (PUINT)&HwParamLen, ulHwParamOffset, 2);

	HwParamLen = ntohs(HwParamLen);

	if (0 == HwParamLen || HwParamLen > Adapter->uiNVMDSDSize)

	{

		return STATUS_IMAGE_CHECKSUM_MISMATCH;

	}



	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "LED Thread:HwParamLen = 0x%x", HwParamLen);

	Status = ValidateDSDParamsChecksum(Adapter, ulHwParamOffset, HwParamLen);
@@ -369,14 +336,11 @@ static int ReadLEDInformationFromEEPROM(PMINI_ADAPTER Adapter, UCHAR GPIO_Array[ 
	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "usEEPROMVersion: Minor:0x%X Major:0x%x", usEEPROMVersion&0xFF, ((usEEPROMVersion>>8)&0xFF));





	if (((usEEPROMVersion>>8)&0xFF) < EEPROM_MAP5_MAJORVERSION)

	{

	if (((usEEPROMVersion>>8)&0xFF) < EEPROM_MAP5_MAJORVERSION) {

		BeceemNVMRead(Adapter, (PUINT)&usHwParamData, EEPROM_HW_PARAM_POINTER_ADDRESS, 2);

		usHwParamData = ntohs(usHwParamData);

		dwReadValue   = usHwParamData;

	}

	else

	{

	} else {

		/*

		 * Validate Compatibility section and then read HW param

		 * if compatibility section is valid.
@@ -386,9 +350,8 @@ static int ReadLEDInformationFromEEPROM(PMINI_ADAPTER Adapter, UCHAR GPIO_Array[ 
				COMPATIBILITY_SECTION_LENGTH_MAP5);



		if (Status != STATUS_SUCCESS)

		{

			return Status;

		}



		BeceemNVMRead(Adapter, (PUINT)&dwReadValue, EEPROM_HW_PARAM_POINTER_ADDRRES_MAP5, 4);

		dwReadValue = ntohl(dwReadValue);

	}
@@ -404,14 +367,11 @@ static int ReadLEDInformationFromEEPROM(PMINI_ADAPTER Adapter, UCHAR GPIO_Array[ 
	 */

	if (dwReadValue < DSD_START_OFFSET ||

			dwReadValue > (Adapter->uiNVMDSDSize-DSD_START_OFFSET))

	{

		return STATUS_IMAGE_CHECKSUM_MISMATCH;

	}



	Status = ValidateHWParmStructure(Adapter, dwReadValue);

	if (Status) {

	if (Status)

		return Status;

	}



	/*

	 * Add DSD_START_OFFSET to the offset read from the EEPROM.
@@ -429,35 +389,25 @@ static int ReadLEDInformationFromEEPROM(PMINI_ADAPTER Adapter, UCHAR GPIO_Array[ 
	 * number to GPIO pin number to GPIO_Array

	 */

	BeceemNVMRead(Adapter, (UINT *)ucGPIOInfo, dwReadValue, 32);

	for (ucIndex = 0; ucIndex < 32; ucIndex++)

	{

	for (ucIndex = 0; ucIndex < 32; ucIndex++) {



		switch (ucGPIOInfo[ucIndex])

		{

		switch (ucGPIOInfo[ucIndex]) {

		case RED_LED:

			{

			GPIO_Array[RED_LED] = ucIndex;

			Adapter->gpioBitMap |= (1 << ucIndex);

			break;

			}

		case BLUE_LED:

			{

			GPIO_Array[BLUE_LED] = ucIndex;

			Adapter->gpioBitMap |= (1 << ucIndex);

			break;

			}

		case YELLOW_LED:

			{

			GPIO_Array[YELLOW_LED] = ucIndex;

			Adapter->gpioBitMap |= (1 << ucIndex);

			break;

			}

		case GREEN_LED:

			{

			GPIO_Array[GREEN_LED] = ucIndex;

			Adapter->gpioBitMap |= (1 << ucIndex);

			break;

			}

		default:

			break;

		}
@@ -479,8 +429,7 @@ static int ReadConfigFileStructure(PMINI_ADAPTER Adapter, BOOLEAN *bEnableThread 
	UCHAR bData = 0;

	memset(GPIO_Array, DISABLE_GPIO_NUM, NUM_OF_LEDS+1);



	if (!Adapter->pstargetparams || IS_ERR(Adapter->pstargetparams))

	{

	if (!Adapter->pstargetparams || IS_ERR(Adapter->pstargetparams)) {

		BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "Target Params not Avail.\n");

		return -ENOENT;

	}
@@ -488,13 +437,10 @@ static int ReadConfigFileStructure(PMINI_ADAPTER Adapter, BOOLEAN *bEnableThread 
	/* Populate GPIO_Array with GPIO numbers for LED functions */

	/* Read the GPIO numbers from EEPROM */

	Status = ReadLEDInformationFromEEPROM(Adapter, GPIO_Array);

	if (Status == STATUS_IMAGE_CHECKSUM_MISMATCH)

	{

	if (Status == STATUS_IMAGE_CHECKSUM_MISMATCH) {

		*bEnableThread = FALSE;

		return STATUS_SUCCESS;

	}

	else if (Status)

	{

	} else if (Status) {

		*bEnableThread = FALSE;

		return Status;

	}
@@ -512,16 +458,14 @@ static int ReadConfigFileStructure(PMINI_ADAPTER Adapter, BOOLEAN *bEnableThread 
	 * driver state and LED blink state.

	 */



	for (uiIndex = 0; uiIndex < NUM_OF_LEDS; uiIndex++)

	{

	for (uiIndex = 0; uiIndex < NUM_OF_LEDS; uiIndex++) {

		bData = *puCFGData;



		/*

		 * Check Bit 8 for polarity. If it is set,

		 * polarity is reverse polarity

		 */

		if (bData & 0x80)

		{

		if (bData & 0x80) {

			Adapter->LEDInfo.LEDState[uiIndex].BitPolarity = 0;

			/* unset the bit 8 */

			bData = bData & 0x7f;
@@ -546,8 +490,7 @@ static int ReadConfigFileStructure(PMINI_ADAPTER Adapter, BOOLEAN *bEnableThread 
	 * Check if all the LED settings are disabled. If it is disabled,

	 * dont launch the LED control thread.

	 */

	for (uiIndex = 0; uiIndex < NUM_OF_LEDS; uiIndex++)

	{

	for (uiIndex = 0; uiIndex < NUM_OF_LEDS; uiIndex++) {

		if ((Adapter->LEDInfo.LEDState[uiIndex].LED_Type == DISABLE_GPIO_NUM) ||

			(Adapter->LEDInfo.LEDState[uiIndex].LED_Type == 0x7f) ||

			(Adapter->LEDInfo.LEDState[uiIndex].LED_Type == 0))
@@ -581,8 +524,7 @@ static VOID LedGpioInit(PMINI_ADAPTER Adapter) 
	/* Set all LED GPIO Mode to output mode */

	if (rdmalt(Adapter, GPIO_MODE_REGISTER, &uiResetValue, sizeof(uiResetValue)) < 0)

		BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "LED Thread: RDM Failed\n");

	for (uiIndex = 0; uiIndex < NUM_OF_LEDS; uiIndex++)

	{

	for (uiIndex = 0; uiIndex < NUM_OF_LEDS; uiIndex++) {

		if (Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num != DISABLE_GPIO_NUM)

			uiResetValue |= (1 << Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num);

		TURN_OFF_LED(1 << Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num, uiIndex);
@@ -600,36 +542,25 @@ static INT BcmGetGPIOPinInfo(PMINI_ADAPTER Adapter, UCHAR *GPIO_num_tx, UCHAR *G 
	*GPIO_num_tx = DISABLE_GPIO_NUM;

	*GPIO_num_rx = DISABLE_GPIO_NUM;



	for (uiIndex = 0; uiIndex < NUM_OF_LEDS; uiIndex++)

	{

	for (uiIndex = 0; uiIndex < NUM_OF_LEDS; uiIndex++) {



		if ((currdriverstate == NORMAL_OPERATION) ||

				(currdriverstate == IDLEMODE_EXIT) ||

				(currdriverstate == FW_DOWNLOAD))

		{

			if (Adapter->LEDInfo.LEDState[uiIndex].LED_Blink_State & currdriverstate)

			{

				if (Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num != DISABLE_GPIO_NUM)

				{

					if (*GPIO_num_tx == DISABLE_GPIO_NUM)

					{

				(currdriverstate == FW_DOWNLOAD)) {

			if (Adapter->LEDInfo.LEDState[uiIndex].LED_Blink_State & currdriverstate) {

				if (Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num != DISABLE_GPIO_NUM) {

					if (*GPIO_num_tx == DISABLE_GPIO_NUM) {

						*GPIO_num_tx = Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num;

						*uiLedTxIndex = uiIndex;

					}

					else

					{

					} else {

						*GPIO_num_rx = Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num;

						*uiLedRxIndex = uiIndex;

					}

				}

			}

		}

		else

		{

			if (Adapter->LEDInfo.LEDState[uiIndex].LED_On_State & currdriverstate)

			{

				if (Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num != DISABLE_GPIO_NUM)

				{

		} else {

			if (Adapter->LEDInfo.LEDState[uiIndex].LED_On_State & currdriverstate) {

				if (Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num != DISABLE_GPIO_NUM) {

					*GPIO_num_tx = Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num;

					*uiLedTxIndex = uiIndex;

				}
@@ -664,8 +595,7 @@ static VOID LEDControlThread(PMINI_ADAPTER Adapter) 


	GPIO_num = DISABLE_GPIO_NUM;



	while (TRUE)

	{

	while (TRUE) {

		/* Wait till event is triggered */

		if ((GPIO_num == DISABLE_GPIO_NUM)

						||
@@ -674,13 +604,10 @@ static VOID LEDControlThread(PMINI_ADAPTER Adapter) 
				 (currdriverstate != LOWPOWER_MODE_ENTER))

						||

				(currdriverstate == LED_THREAD_INACTIVE))

		{

			Status = wait_event_interruptible(Adapter->LEDInfo.notify_led_event,

				currdriverstate != Adapter->DriverState || kthread_should_stop());

		}



		if (kthread_should_stop() || Adapter->device_removed)

		{

		if (kthread_should_stop() || Adapter->device_removed) {

			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "Led thread got signal to exit..hence exiting");

			Adapter->LEDInfo.led_thread_running = BCM_LED_THREAD_DISABLED;

			TURN_OFF_LED(1 << GPIO_num, uiLedIndex);
@@ -688,32 +615,24 @@ static VOID LEDControlThread(PMINI_ADAPTER Adapter) 
		}



		if (GPIO_num != DISABLE_GPIO_NUM)

		{

			TURN_OFF_LED(1 << GPIO_num, uiLedIndex);

		}



		if (Adapter->LEDInfo.bLedInitDone == FALSE)

		{

		if (Adapter->LEDInfo.bLedInitDone == FALSE) {

			LedGpioInit(Adapter);

			Adapter->LEDInfo.bLedInitDone = TRUE;

		}



		switch (Adapter->DriverState)

		{

		switch (Adapter->DriverState) {

		case DRIVER_INIT:

			{

			currdriverstate = DRIVER_INIT;

					/* Adapter->DriverState; */

			BcmGetGPIOPinInfo(Adapter, &GPIO_num, &dummyGPIONum, &uiLedIndex, &dummyIndex, currdriverstate);



			if (GPIO_num != DISABLE_GPIO_NUM)

			{

				TURN_ON_LED(1 << GPIO_num, uiLedIndex);

			}

			}



			break;

		case FW_DOWNLOAD:

			{

			/*

			 * BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS,

			 *	LED_DUMP_INFO, DBG_LVL_ALL,
@@ -722,22 +641,16 @@ static VOID LEDControlThread(PMINI_ADAPTER Adapter) 
			currdriverstate = FW_DOWNLOAD;

			BcmGetGPIOPinInfo(Adapter, &GPIO_num, &dummyGPIONum, &uiLedIndex, &dummyIndex, currdriverstate);



			if (GPIO_num != DISABLE_GPIO_NUM)

			{

			if (GPIO_num != DISABLE_GPIO_NUM) {

				timeout = 50;

				LED_Blink(Adapter, 1 << GPIO_num, uiLedIndex, timeout, -1, currdriverstate);

			}

			}

			break;

		case FW_DOWNLOAD_DONE:

			{

			currdriverstate = FW_DOWNLOAD_DONE;

			BcmGetGPIOPinInfo(Adapter, &GPIO_num, &dummyGPIONum, &uiLedIndex, &dummyIndex, currdriverstate);

			if (GPIO_num != DISABLE_GPIO_NUM)

			{

				TURN_ON_LED(1 << GPIO_num, uiLedIndex);

			}

			}

			break;



		case SHUTDOWN_EXIT:
@@ -746,14 +659,10 @@ static VOID LEDControlThread(PMINI_ADAPTER Adapter) 
			 * state as well.

			 */

		case NO_NETWORK_ENTRY:

			{

			currdriverstate = NO_NETWORK_ENTRY;

			BcmGetGPIOPinInfo(Adapter, &GPIO_num, &dummyGPIONum, &uiLedIndex, &dummyGPIONum, currdriverstate);

			if (GPIO_num != DISABLE_GPIO_NUM)

			{

				TURN_ON_LED(1 << GPIO_num, uiLedIndex);

			}

			}

			break;

		case NORMAL_OPERATION:

			{
@@ -765,23 +674,17 @@ static VOID LEDControlThread(PMINI_ADAPTER Adapter) 
				Adapter->LEDInfo.bIdle_led_off = FALSE;



				BcmGetGPIOPinInfo(Adapter, &GPIO_num_tx, &GPIO_num_rx, &uiLEDTx, &uiLEDRx, currdriverstate);

			if ((GPIO_num_tx == DISABLE_GPIO_NUM) && (GPIO_num_rx == DISABLE_GPIO_NUM))

			{

				if ((GPIO_num_tx == DISABLE_GPIO_NUM) && (GPIO_num_rx == DISABLE_GPIO_NUM)) {

					GPIO_num = DISABLE_GPIO_NUM;

			}

			else

			{

				} else {

					/*

					 * If single LED is selected, use same

					 * for both Tx and Rx

					 */

				if (GPIO_num_tx == DISABLE_GPIO_NUM)

				{

					if (GPIO_num_tx == DISABLE_GPIO_NUM) {

						GPIO_num_tx = GPIO_num_rx;

						uiLEDTx = uiLEDRx;

				}

				else if (GPIO_num_rx == DISABLE_GPIO_NUM)

				{

					} else if (GPIO_num_rx == DISABLE_GPIO_NUM) {

						GPIO_num_rx = GPIO_num_tx;

						uiLEDRx = uiLEDTx;

					}
@@ -794,14 +697,11 @@ static VOID LEDControlThread(PMINI_ADAPTER Adapter) 
			}

			break;

		case LOWPOWER_MODE_ENTER:

			{

			currdriverstate = LOWPOWER_MODE_ENTER;

			if (DEVICE_POWERSAVE_MODE_AS_MANUAL_CLOCK_GATING == Adapter->ulPowerSaveMode)

			{

			if (DEVICE_POWERSAVE_MODE_AS_MANUAL_CLOCK_GATING == Adapter->ulPowerSaveMode) {

				/* Turn OFF all the LED */

				uiResetValue = 0;

				for (uiIndex = 0; uiIndex < NUM_OF_LEDS; uiIndex++)

				{

				for (uiIndex = 0; uiIndex < NUM_OF_LEDS; uiIndex++) {

					if (Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num != DISABLE_GPIO_NUM)

						TURN_OFF_LED((1 << Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num), uiIndex);

				}
@@ -813,47 +713,35 @@ static VOID LEDControlThread(PMINI_ADAPTER Adapter) 
			wake_up(&Adapter->LEDInfo.idleModeSyncEvent);

			GPIO_num = DISABLE_GPIO_NUM;

			break;

			}

		case IDLEMODE_CONTINUE:

			{

			currdriverstate = IDLEMODE_CONTINUE;

			GPIO_num = DISABLE_GPIO_NUM;

			}

			break;

		case IDLEMODE_EXIT:

			{

			}

			break;

		case DRIVER_HALT:

			{

			currdriverstate = DRIVER_HALT;

			GPIO_num = DISABLE_GPIO_NUM;

			for (uiIndex = 0; uiIndex < NUM_OF_LEDS; uiIndex++)

			{

			for (uiIndex = 0; uiIndex < NUM_OF_LEDS; uiIndex++) {

				if (Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num !=

						DISABLE_GPIO_NUM)

					TURN_OFF_LED((1 << Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num), uiIndex);

			}

			/* Adapter->DriverState = DRIVER_INIT; */

			}

			break;

		case LED_THREAD_INACTIVE:

			{

			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "InActivating LED thread...");

			currdriverstate = LED_THREAD_INACTIVE;

			Adapter->LEDInfo.led_thread_running = BCM_LED_THREAD_RUNNING_INACTIVELY;

			Adapter->LEDInfo.bLedInitDone = FALSE;

			/* disable ALL LED */

			for (uiIndex = 0; uiIndex < NUM_OF_LEDS; uiIndex++)

			{

			for (uiIndex = 0; uiIndex < NUM_OF_LEDS; uiIndex++) {

				if (Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num !=

						DISABLE_GPIO_NUM)

					TURN_OFF_LED((1 << Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num), uiIndex);

			}

			}

			break;

		case LED_THREAD_ACTIVE:

			{

			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "Activating LED thread again...");

			if (Adapter->LinkUpStatus == FALSE)

				Adapter->DriverState = NO_NETWORK_ENTRY;
@@ -861,7 +749,6 @@ static VOID LEDControlThread(PMINI_ADAPTER Adapter) 
				Adapter->DriverState = NORMAL_OPERATION;



			Adapter->LEDInfo.led_thread_running = BCM_LED_THREAD_RUNNING_ACTIVELY;

			}

			break;

			/* return; */

		default:
@@ -882,36 +769,29 @@ int InitLedSettings(PMINI_ADAPTER Adapter) 
	 * is used to change the polarity of the LED.

	 */



	for (uiIndex = 0; uiIndex < NUM_OF_LEDS; uiIndex++) {

	for (uiIndex = 0; uiIndex < NUM_OF_LEDS; uiIndex++)

		Adapter->LEDInfo.LEDState[uiIndex].BitPolarity = 1;

	}



	/*

	 * Read the LED settings of CONFIG file and map it

	 * to GPIO numbers in EEPROM

	 */

	Status = ReadConfigFileStructure(Adapter, &bEnableThread);

	if (STATUS_SUCCESS != Status)

	{

	if (STATUS_SUCCESS != Status) {

		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "LED Thread: FAILED in ReadConfigFileStructure\n");

		return Status;

	}



	if (Adapter->LEDInfo.led_thread_running)

	{

		if (bEnableThread)

	if (Adapter->LEDInfo.led_thread_running) {

		if (bEnableThread) {

			;

		else

		{

		} else {

			Adapter->DriverState = DRIVER_HALT;

			wake_up(&Adapter->LEDInfo.notify_led_event);

			Adapter->LEDInfo.led_thread_running = BCM_LED_THREAD_DISABLED;

		}



	}



	else if (bEnableThread)

	{

	} else if (bEnableThread) {

		/* Create secondary thread to handle the LEDs */

		init_waitqueue_head(&Adapter->LEDInfo.notify_led_event);

		init_waitqueue_head(&Adapter->LEDInfo.idleModeSyncEvent);
@@ -919,8 +799,7 @@ int InitLedSettings(PMINI_ADAPTER Adapter) 
		Adapter->LEDInfo.bIdle_led_off = FALSE;

		Adapter->LEDInfo.led_cntrl_threadid = kthread_run((int (*)(void *))

		LEDControlThread, Adapter, "led_control_thread");

		if (IS_ERR(Adapter->LEDInfo.led_cntrl_threadid))

		{

		if (IS_ERR(Adapter->LEDInfo.led_cntrl_threadid)) {

			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "Not able to spawn Kernel Thread\n");

				Adapter->LEDInfo.led_thread_running = BCM_LED_THREAD_DISABLED;

			return PTR_ERR(Adapter->LEDInfo.led_cntrl_threadid);