Commit ebeab0be authored by Swathi K S's avatar Swathi K S Committed by Krzysztof Kozlowski
Browse files

arm64: dts: fsd: Add Ethernet support for PERIC Block of FSD SoC



The FSD SoC contains two instances of Synopsys DWC QoS Ethernet IP, one in
FSYS0 block and other in PERIC block.
The ethernet interface is connected to a switch which is not managed by
Linux.

Adds device tree node for Ethernet in PERIC Block and enables the same for
FSD platform.

Signed-off-by: default avatarPankaj Dubey <pankaj.dubey@samsung.com>
Signed-off-by: default avatarJayati Sahu <jayati.sahu@samsung.com>
Signed-off-by: default avatarSwathi K S <swathi.ks@samsung.com>
Link: https://lore.kernel.org/r/20250307044904.59077-3-swathi.ks@samsung.com


Signed-off-by: default avatarKrzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
parent 1d62af22
Loading
Loading
Loading
Loading
+10 −0
Original line number Diff line number Diff line
@@ -74,6 +74,16 @@ fixed-link {
	};
};

&ethernet1 {
	status = "okay";

	phy-mode = "rgmii-id";
	fixed-link {
		speed = <1000>;
		full-duplex;
	};
};

&fin_pll {
	clock-frequency = <24000000>;
};
+56 −0
Original line number Diff line number Diff line
@@ -437,6 +437,62 @@ i2s1_bus: i2s1-bus-pins {
		samsung,pin-pud = <FSD_PIN_PULL_DOWN>;
		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
	};

	eth1_tx_clk: eth1-tx-clk-pins {
		samsung,pins = "gpf2-0";
		samsung,pin-function = <FSD_PIN_FUNC_2>;
		samsung,pin-pud = <FSD_PIN_PULL_DOWN>;
		samsung,pin-drv = <FSD_PIN_DRV_LV6>;
	};

	eth1_tx_data: eth1-tx-data-pins {
		samsung,pins = "gpf2-1", "gpf2-2", "gpf2-3", "gpf2-4";
		samsung,pin-function = <FSD_PIN_FUNC_2>;
		samsung,pin-pud = <FSD_PIN_PULL_UP>;
		samsung,pin-drv = <FSD_PIN_DRV_LV6>;
	};

	eth1_tx_ctrl: eth1-tx-ctrl-pins {
		samsung,pins = "gpf2-5";
		samsung,pin-function = <FSD_PIN_FUNC_2>;
		samsung,pin-pud = <FSD_PIN_PULL_UP>;
		samsung,pin-drv = <FSD_PIN_DRV_LV6>;
	};

	eth1_phy_intr: eth1-phy-intr-pins {
		samsung,pins = "gpf2-6";
		samsung,pin-function = <FSD_PIN_FUNC_2>;
		samsung,pin-pud = <FSD_PIN_PULL_UP>;
		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
	};

	eth1_rx_clk: eth1-rx-clk-pins {
		samsung,pins = "gpf3-0";
		samsung,pin-function = <FSD_PIN_FUNC_2>;
		samsung,pin-pud = <FSD_PIN_PULL_UP>;
		samsung,pin-drv = <FSD_PIN_DRV_LV6>;
	};

	eth1_rx_data: eth1-rx-data-pins {
		samsung,pins = "gpf3-1", "gpf3-2", "gpf3-3", "gpf3-4";
		samsung,pin-function = <FSD_PIN_FUNC_2>;
		samsung,pin-pud = <FSD_PIN_PULL_UP>;
		samsung,pin-drv = <FSD_PIN_DRV_LV6>;
	};

	eth1_rx_ctrl: eth1-rx-ctrl-pins {
		samsung,pins = "gpf3-5";
		samsung,pin-function = <FSD_PIN_FUNC_2>;
		samsung,pin-pud = <FSD_PIN_PULL_UP>;
		samsung,pin-drv = <FSD_PIN_DRV_LV6>;
	};

	eth1_mdio: eth1-mdio-pins {
		samsung,pins = "gpf3-6", "gpf3-7";
		samsung,pin-function = <FSD_PIN_FUNC_2>;
		samsung,pin-pud = <FSD_PIN_PULL_UP>;
		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
	};
};

&pinctrl_pmu {
+30 −0
Original line number Diff line number Diff line
@@ -979,6 +979,36 @@ mfc: mfc@12880000 {
			memory-region = <&mfc_left>;
		};

		ethernet1: ethernet@14300000 {
			compatible = "tesla,fsd-ethqos";
			reg = <0x0 0x14300000 0x0 0x10000>;
			interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-names = "macirq";
			clocks = <&clock_peric PERIC_EQOS_TOP_IPCLKPORT_CLK_PTP_REF_I>,
				 <&clock_peric PERIC_EQOS_TOP_IPCLKPORT_ACLK_I>,
				 <&clock_peric PERIC_EQOS_TOP_IPCLKPORT_HCLK_I>,
				 <&clock_peric PERIC_EQOS_TOP_IPCLKPORT_RGMII_CLK_I>,
				 <&clock_peric PERIC_EQOS_TOP_IPCLKPORT_CLK_RX_I>,
				 <&clock_peric PERIC_BUS_D_PERIC_IPCLKPORT_EQOSCLK>,
				 <&clock_peric PERIC_BUS_P_PERIC_IPCLKPORT_EQOSCLK>,
				 <&clock_peric PERIC_EQOS_PHYRXCLK_MUX>,
				 <&clock_peric PERIC_EQOS_PHYRXCLK>,
				 <&clock_peric PERIC_DOUT_RGMII_CLK>;
			clock-names = "ptp_ref", "master_bus", "slave_bus", "tx", "rx",
				      "master2_bus", "slave2_bus", "eqos_rxclk_mux",
				      "eqos_phyrxclk", "dout_peric_rgmii_clk";
			assigned-clocks = <&clock_peric PERIC_EQOS_PHYRXCLK_MUX>,
					  <&clock_peric PERIC_EQOS_PHYRXCLK>;
			assigned-clock-parents = <&clock_peric PERIC_EQOS_PHYRXCLK>;
			pinctrl-names = "default";
			pinctrl-0 = <&eth1_tx_clk>, <&eth1_tx_data>, <&eth1_tx_ctrl>,
				    <&eth1_phy_intr>, <&eth1_rx_clk>, <&eth1_rx_data>,
				    <&eth1_rx_ctrl>, <&eth1_mdio>;
			local-mac-address = [00 00 00 00 00 00];
			iommus = <&smmu_peric 0x0 0x1>;
			status = "disabled";
		};

		ufs: ufs@15120000 {
			compatible = "tesla,fsd-ufs";
			reg = <0x0 0x15120000 0x0 0x200>,  /* 0: HCI standard */