In fact the device with chip id 0xD283 is called NCT6126D, and that is
the chip id the Nuvoton code was written for. Correct that name to avoid
confusion, because a NCT6116D in fact exists as well but has another
chip id, and is currently not supported.
The look at the spec also revealed that GPIO group7 in fact has 8 pins,
so correct the pin count in that group as well.
Fixes: d0918a84af ("gpio-f7188x: Add GPIO support for Nuvoton NCT6116")
Reported-by: Xing Tong Wu <xingtong.wu@siemens.com>
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Acked-by: Simon Guinot <simon.guinot@sequanux.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Pull MFD updates from Lee Jones:
"New Drivers:
- Add support for Renesas RZ/G2L MTU3
New Device Support:
- Add support for Lenovo Yoga Book X90F to Intel CHT WC
- Add support for MAX5970 and MAX5978 to Simple MFD (I2C)
- Add support for Meteor Lake PCH-S LPSS PCI to Intel LPSS PCI
- Add support for AXP15060 PMIC to X-Powers PMIC collection
Remove Device Support:
- Remove support for Samsung 5M8751 and S5M8763 PMIC devices
New Functionality:
- Convert deprecated QCOM IRQ Chip to config registers
- Add support for 32-bit address spaces to Renesas SMUs
Fix-ups:
- Make use of APIs / MACROs designed to simplify and demystify
- Add / improve Device Tree bindings
- Memory saving struct layout optimisations
- Remove old / deprecated functionality
- Factor out unassigned register addresses from ranges
- Trivial: Spelling fixes, renames and coding style fixes
- Rid 'defined but not used' warnings
- Remove ineffective casts and pointer stubs
Bug Fixes:
- Fix incorrectly non-inverted mask/unmask IRQs on QCOM platforms
- Remove MODULE_*() helpers from non-tristate drivers
- Do not attempt to use out-of-range memory addresses associated with io_base
- Provide missing export helpers
- Fix remap bulk read optimisation fallout
- Fix memory leak issues in error paths"
* tag 'mfd-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (88 commits)
dt-bindings: mfd: ti,j721e-system-controller: Add SoC chip ID
leds: bd2606mvv: Driver for the Rohm 6 Channel i2c LED driver
dt-bindings: mfd: qcom,spmi-pmic: Document flash LED controller
dt-bindings: mfd: x-powers,axp152: Document the AXP15060 variant
mfd: axp20x: Add support for AXP15060 PMIC
dt-bindings: mfd: x-powers,axp152: Document the AXP313a variant
counter: rz-mtu3-cnt: Unlock on error in rz_mtu3_count_ceiling_write()
dt-bindings: mfd: dlg,da9063: Document voltage monitoring
dt-bindings: mfd: stm32: Remove unnecessary blank lines
dt-bindings: mfd: qcom,spmi-pmic: Use generic ADC node name in examples
dt-bindings: mfd: syscon: Add nuvoton,ma35d1-sys compatible
MAINTAINERS: Add entries for Renesas RZ/G2L MTU3a counter driver
counter: Add Renesas RZ/G2L MTU3a counter driver
Documentation: ABI: sysfs-bus-counter: add cascade_counts_enable and external_input_phase_clock_select
mfd: Add Renesas RZ/G2L MTU3a core driver
dt-bindings: timer: Document RZ/G2L MTU3a bindings
mfd: rsmu_i2c: Convert to i2c's .probe_new() again
mfd: intel-lpss: Add Intel Meteor Lake PCH-S LPSS PCI IDs
mfd: dln2: Fix memory leak in dln2_probe()
mfd: axp20x: Fix axp288 writable-ranges
...
Pull gpio updates from Bartosz Golaszewski:
"We have some new drivers, significant refactoring of existing intel
platforms, lots of improvements all around, mass conversion to using
immutable irqchips by drivers that had not been converted individually
yet and some changes in the core library code.
Summary:
New drivers:
- add a driver for the Loongson GPIO controller
- add a driver for the fxl6408 I2C GPIO expander
- add a GPIO module containing code common for Intel Elkhart Lake and
Merrifield platforms
- add a driver for the Intel Elkhart Lake platform reusing the code
from the intel tangier library
GPIOLIB core:
- GPIO ACPI improvements
- simplify gpiochip_add_data_with_keys() fwnode handling
- cleanup header inclusions (remove unneeded ones, order the rest
alphabetically)
- remove duplicate code (reuse krealloc() instead of open-coding it,
drop a duplicated check in gpiod_find_and_request())
- reshuffle the code to remove unnecessary forward declarations
- coding style cleanups and improvements
- add a helper for accessing device fwnodes
- small updates in docs
Driver improvements:
- convert all remaining GPIO irqchip drivers to using immutable
irqchips
- drop unnecessary of_match_ptr() macro expansions
- shrink the code in gpio-merrifield significantly by reusing the
code from gpio-tangier + minor tweaks to the driver code
- remove MODULE_LICENSE() from drivers that can only be built-in
- add device-tree support to gpio-loongson1
- use new regmap features in gpio-104-dio-48e and gpio-pcie-idio-24
- minor tweaks and fixes to gpio-xra1403, gpio-sim, gpio-tegra194,
gpio-omap, gpio-aspeed, gpio-raspberrypi-exp
- shrink code in gpio-ich and gpio-pxa
- Kconfig tweak for gpio-pmic-eic-sprd"
* tag 'gpio-updates-for-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (99 commits)
gpio: gpiolib: Simplify gpiochip_add_data_with_key() fwnode
gpiolib: Add gpiochip_set_data() helper
gpiolib: Move gpiochip_get_data() higher in the code
gpiolib: Check array_info for NULL only once in gpiod_get_array()
gpiolib: Replace open coded krealloc()
gpiolib: acpi: Add a ignore wakeup quirk for Clevo NL5xNU
gpiolib: acpi: Move ACPI device NULL check to acpi_get_driver_gpio_data()
gpiolib: acpi: use the fwnode in acpi_gpiochip_find()
gpio: mm-lantiq: Fix typo in the newly added header filename
sh: mach-x3proto: Add missing #include <linux/gpio/driver.h>
powerpc/40x: Add missing select OF_GPIO_MM_GPIOCHIP
gpio: xlp: Convert to immutable irq_chip
gpio: xilinx: Convert to immutable irq_chip
gpio: xgs-iproc: Convert to immutable irq_chip
gpio: visconti: Convert to immutable irq_chip
gpio: tqmx86: Convert to immutable irq_chip
gpio: thunderx: Convert to immutable irq_chip
gpio: stmpe: Convert to immutable irq_chip
gpio: siox: Convert to immutable irq_chip
gpio: rda: Convert to immutable irq_chip
...
intel-gpio for v6.4-2
* Fixed suspend issue on Clevo NL5xNU
* Split a new Intel Tangier (library) driver for current and new platforms
* Introduced a new driver for Intel Elkhart Lake PSE GPIO (see also above)
* Contained a few fixes for the previous of_gpio.h cleanup
* Miscellaneous cleanups here and there
The following is an automated git shortlog grouped by driver:
elkhartlake:
- Introduce Intel Elkhart Lake PSE GPIO
gpiolib:
- acpi: Add a ignore wakeup quirk for Clevo NL5xNU
- acpi: Move ACPI device NULL check to acpi_get_driver_gpio_data()
- acpi: use the fwnode in acpi_gpiochip_find()
ich:
- Use devm_gpiochip_add_data() to simplify remove path
merrifield:
- Utilise temporary variable for struct device
- Use dev_err_probe()
- Adapt to Intel Tangier GPIO driver
mips:
- ar7: include linux/gpio/driver.h
mm-lantiq:
- Fix typo in the newly added header filename
powerpc/40x:
- Add missing select OF_GPIO_MM_GPIOCHIP
sh:
- mach-x3proto: Add missing #include <linux/gpio/driver.h>
tangier:
- Introduce Intel Tangier GPIO driver
Add minimal driver for Fairchild FXL6408 8-bit I2C-controlled GPIO expander
using the generic regmap based GPIO driver (GPIO_REGMAP).
The driver implements setting the GPIO direction, reading inputs
and writing outputs.
In addition to that the FXL6408 has the following functionalities:
- allows to monitor input ports for data transitions with an interrupt pin
- all inputs can be configured with pull-up or pull-down resistors
Datasheet: https://www.onsemi.com/download/data-sheet/pdf/fxl6408-d.pdf
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Co-developed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
[Bartosz: order includes alphabetically]
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
intel-gpio for v6.4-1
* Remove some of the legacy APIs that are not used anymore
* Clean up headers in the GPIO library and drivers
The following is an automated git shortlog grouped by driver:
aggregator:
- Add missing header(s)
ARM:
- s3c64xx: Use the right include
- orion/gpio: Use the right include
gpiolib:
- Clean up headers
- Group forward declarations in consumer.h
- Deduplicate forward declarations in consumer.h
- Drop unused forward declaration from driver.h
- split of_mm_gpio_chip out of linux/of_gpio.h
- split linux/gpio/driver.h out of linux/gpio.h
- remove legacy gpio_export()
- remove gpio_set_debounce()
- remove asm-generic/gpio.h
- coldfire: remove custom asm/gpio.h
- remove empty asm/gpio.h files
- Make the legacy <linux/gpio.h> consumer-only
hte:
- tegra-194: Use proper includes
reg:
- Add missing header(s)
regmap:
- Add missing header(s)
This is a rarely used feature that has nothing to do with the
client-side of_gpio.h.
Split it out with a separate header file and Kconfig option
so it can be removed on its own timeline aside from removing
the of_gpio consumer interfaces.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Now that coldfire is the only user of a custom asm/gpio.h, it seems
better to remove this as well, and have the same interface everywhere.
For the gpio_get_value()/gpio_set_value()/gpio_to_irq(), gpio_cansleep()
functions, the custom version is only a micro-optimization to inline the
function for constant GPIO numbers. However, in the coldfire defconfigs,
I was unable to find a single instance where this micro-optimization
was even used, and according to Geert the only user appears to be the
QSPI chip that is disabled everywhere.
The custom gpio_request_one() function is even less useful, as it is
guarded by an #ifdef that is never true.
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
REGMAP is a hidden (not user visible) symbol. Users cannot set it
directly thru "make *config", so drivers should select it instead of
depending on it if they need it.
Consistently using "select" or "depends on" can also help reduce
Kconfig circular dependency issues.
Therefore, change the use of "depends on REGMAP" to "select REGMAP".
Fixes: ebe363197e ("gpio: add a reusable generic gpio_chip using regmap")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Michael Walle <michael@walle.cc>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Bartosz Golaszewski <brgl@bgdev.pl>
Cc: linux-gpio@vger.kernel.org
Acked-by: Michael Walle <michael@walle.cc>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The Loongson platforms GPIO controller contains 60 GPIO pins in total,
4 of which are dedicated GPIO pins, and the remaining 56 are reused
with other functions. Each GPIO can set input/output and has the
interrupt capability.
This driver added support for Loongson GPIO controller and support to
use DTS or ACPI to descibe GPIO device resources.
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Hongchen Zhang <zhanghongchen@loongson.cn>
Signed-off-by: Liu Peibao <liupeibao@loongson.cn>
Signed-off-by: Juxin Gao <gaojuxin@loongson.cn>
Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Pull gpio updates from Bartosz Golaszewski:
"A rather small update, there are no new drivers, just improvements and
refactoring in existing ones.
Thanks to migrating of several drivers to using generalized APIs and
dropping of OF interfaces in favor of using software nodes we're
actually removing more code than we're adding.
Core GPIOLIB:
- drop several OF interfaces after moving a significant part of the
code to using software nodes
- remove more interfaces referring to the global GPIO numberspace
that we're getting rid of
- improvements in the gpio-regmap library
- add helper for GPIO device reference counting
- remove unused APIs
- minor tweaks like sorting headers alphabetically
Extended support in existing drivers:
- add support for Tegra 234 PMC to gpio-tegra186
Driver improvements:
- migrate the 104-dio/idi family of drivers to using the regmap-irq
API
- migrate gpio-i8255 and gpio-mm to the GPIO regmap API
- clean-ups in gpio-pca953x
- remove duplicate assignments of of_gpio_n_cells in gpio-davinci,
gpio-ge, gpio-xilinx, gpio-zevio and gpio-wcd934x
- improvements to gpio-pcf857x: implement get/set_multiple callbacks,
use generic device properties instead of OF + minor tweaks
- fix OF-related header includes and Kconfig dependencies in
gpio-zevio
- dynamically allocate the GPIO base in gpio-omap
- use a dedicated printf specifier for printing fwnode info in
gpio-sim
- use dev_name() for the GPIO chip label in gpio-vf610
- other minor tweaks and fixes
Documentation:
- remove mentions of legacy API from comments in various places
- convert the DT binding documents to YAML schema for Fujitsu
MB86S7x, Unisoc GPIO and Unisoc EIC
- document the Unisoc UMS512 controller in DT bindings"
* tag 'gpio-updates-for-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (54 commits)
gpio: sim: Use %pfwP specifier instead of calling fwnode API directly
gpio: tegra186: remove unneeded loop in tegra186_gpio_init_route_mapping()
gpiolib: of: Move enum of_gpio_flags to its only user
gpio: mvebu: Use IS_REACHABLE instead of IS_ENABLED for CONFIG_PWM
gpio: zevio: Add missing header
gpio: Get rid of gpio_to_chip()
gpio: pcf857x: Drop unneeded explicit casting
gpio: pcf857x: Make use of device properties
gpio: pcf857x: Get rid of legacy platform data
gpio: rockchip: Do not mention legacy API in the code
gpio: wcd934x: Remove duplicate assignment of of_gpio_n_cells
gpio: zevio: Use proper headers and drop OF_GPIO dependency
gpio: zevio: Remove duplicate assignment of of_gpio_n_cells
gpio: xilinx: Remove duplicate assignment of of_gpio_n_cells
dt-bindings: gpio: Add compatible string for Unisoc UMS512
dt-bindings: gpio: Convert Unisoc EIC controller binding to yaml
dt-bindings: gpio: Convert Unisoc GPIO controller binding to yaml
gpio: ge: Remove duplicate assignment of of_gpio_n_cells
gpio: davinci: Remove duplicate assignment of of_gpio_n_cells
gpio: omap: use dynamic allocation of base
...
Pull ARM SoC boardfile updates from Arnd Bergmann
"Unused boardfile removal for 6.3
This is a follow-up to the deprecation of most of the old-style board
files that was merged in linux-6.0, removing them for good.
This branch is almost exclusively dead code removal based on those
annotations. Some device driver removals went through separate
subsystem trees, but the majority is in the same branch, in order to
better handle dependencies between the patches and avoid breaking
bisection.
Unfortunately that leads to merge conflicts against other changes in
the subsystem trees, but they should all be trivial to resolve by
removing the files.
See commit 7d0d3fa733 ("Merge tag 'arm-boardfiles-6.0' of
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc") for the
description of which machines were marked unused and are now removed.
The only removals that got postponed are Terastation WXL (mv78xx0) and
Jornada720 (StrongARM1100), which turned out to still have potential
users"
* tag 'arm-boardfile-remove-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (91 commits)
mmc: omap: drop TPS65010 dependency
ARM: pxa: restore mfp-pxa320.h
usb: ohci-omap: avoid unused-variable warning
ARM: debug: remove references in DEBUG_UART_8250_SHIFT to removed configs
ARM: s3c: remove obsolete s3c-cpu-freq header
MAINTAINERS: adjust SAMSUNG SOC CLOCK DRIVERS after s3c24xx support removal
MAINTAINERS: update file entries after arm multi-platform rework and mach-pxa removal
ARM: remove CONFIG_UNUSED_BOARD_FILES
mfd: remove htc-pasic3 driver
w1: remove ds1wm driver
usb: remove ohci-tmio driver
fbdev: remove w100fb driver
fbdev: remove tmiofb driver
mmc: remove tmio_mmc driver
mfd: remove ucb1400 support
mfd: remove toshiba tmio drivers
rtc: remove v3020 driver
power: remove pda_power supply driver
ASoC: pxa: remove unused board support
pcmcia: remove unused pxa/sa1100 drivers
...
The driver doesn't depend on the OF_GPIO to be compiled. Hence
the proper header to use is mod_devicetable.h. Replace of*.h with
the above mentioned and drop redundant dependency.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The regmap API supports IO port accessors so we can take advantage of
regmap abstractions rather than handling access to the device registers
directly in the driver. The gpio-mm module is migrated to the new i8255
library interface leveraging the gpio-regmap API.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The regmap API supports IO port accessors so we can take advantage of
regmap abstractions rather than handling access to the device registers
directly in the driver.
By leveraging the gpio-regmap API, the i8255 library is reduced to
simply a devm_i8255_regmap_register() function, a configuration
structure struct i8255_regmap_config, and a helper macro
i8255_volatile_regmap_range() provided to simplify volatile PPI register
hinting for the regmap.
Legacy functions and code will be removed once all consumers have
migrated to the new i8255 library interface.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The regmap API supports IO port accessors so we can take advantage of
regmap abstractions rather than handling access to the device registers
directly in the driver. Despite the underlying interface being based on
i8255, it is simpler to use the gpio-regmap API directly because the
104-IDI-48 device features only input signals. Therefore, the dependence
on the i8255 GPIO library is removed in this patch.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The regmap API supports IO port accessors so we can take advantage of
regmap abstractions rather than handling access to the device registers
directly in the driver.
For the 104-idi-48, we get an IRQ register with some status information
and basic masking, but it's broken down by banks rather than individual
GPIO. There are six banks (8 GPIO lines each) that correspond to the
lower six bits of the IRQ register (bits 0-5):
Base Address + 7 (Read): IRQ Status Register/IRQ Clear
Bit 0-5: Respective Bank IRQ Statuses
Bit 6: IRQ Status (Active Low)
Bit 7: IRQ Enable Status
Base Address + 7 (Write): IRQ Enable/Disable
Bit 0-5: Respective Bank IRQ Enable/Disable
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The regmap API supports IO port accessors so we can take advantage of
regmap abstractions rather than handling access to the device registers
directly in the driver.
For the 104-dio-48e we have the following IRQ registers (0xB and 0xF):
Base Address +B (Write): Enable Interrupt
Base Address +B (Read): Disable Interrupt
Base Address +F (Read/Write): Clear Interrupt
Any write to 0xB will enable interrupts, while any read will disable
interrupts. Interrupts are cleared by a write to 0xF. There's no IRQ
status register, so software has to assume that if an interrupt is
raised then it was for the 104-DIO-48E device.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
This driver implements a GPIO multiplexer based on latches connected to
other GPIOs. A set of data GPIOs is connected to the data input of
multiple latches. The clock input of each latch is driven by another
set of GPIOs. With two 8-bit latches 10 GPIOs can be multiplexed into
16 GPIOs. GPOs might be a better term as in fact the multiplexed pins
are output only.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
[Bartosz: fixed the strange of_device_id formatting]
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The ACCES PCI-IDIO-16 device is part of the ACCES IDIO-16 family, so the
idio-16 GPIO library module is selected and utilized to consolidate
code.
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The ACCES 104-IDIO-16 device is part of the ACCES IDIO-16 family, so the
idio-16 GPIO library module is selected and utilized to consolidate
code.
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Exposes consumer library functions to facilitate communication with
devices within the ACCES IDIO-16 family such as the 104-IDIO-16 and
the PCI-IDIO-16.
A CONFIG_GPIO_IDIO_16 Kconfig option is introduced by this patch.
Modules wanting access to these idio-16 library functions should select
this Kconfig option and import the GPIO_IDIO_16 symbol namespace.
Cc: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Pull input updates from Dmitry Torokhov:
- a new driver for IBM Operational Panel
- a new driver for PinePhone keyboards
- RT5120 PMIC power key support
- various enhancements and support for new models in xpad (Xbox) driver
- a new compatible ID for Elan touchscreen driver
- rework of adp5588-keys driver to support configuring via device
properties (OF, ACPI, etc) instead of platform data, and proper
support of optional gpiochip functionality (and removal of
gpio-adp5588 driver)
- improvements to firmware update handling in Synaptics RMI4 driver
- support for double key matrix in mt6779-keypad
- support for polled mode in adc-joystick driver
- other assorted driver fixes, cleanups and improvements
* tag 'input-for-v6.1-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (90 commits)
Input: i8042 - fix refount leak on sparc
Input: i8042 - add LoongArch support in i8042-acpipnpio.h
Input: i8042 - rename i8042-x86ia64io.h to i8042-acpipnpio.h
Input: pinephone-keyboard - support the proxied I2C bus
Input: pinephone-keyboard - add PinePhone keyboard driver
dt-bindings: input: Add the PinePhone keyboard binding
dt-bindings: input: Convert hid-over-i2c to DT schema
input: drop empty comment blocks
Input: xpad - add X-Box Adaptive Profile button
Input: add ABS_PROFILE to uapi and documentation
Input: xpad - add X-Box Adaptive XBox button
Input: xpad - add X-Box Adaptive support
Input: ims-pcu - fix spelling mistake "BOOLTLOADER" -> "BOOTLOADER"
Input: ibm-panel - add missing MODULE_DEVICE_TABLE
Input: icn8505 - utilize acpi_get_subsystem_id()
Input: xpad - decipher xpadone packages with GIP defines
Input: xpad - refactor using BIT() macro
Input: synaptics-rmi4 - convert to use sysfs_emit() APIs
Input: twl4030-pwrbutton - add missing of.h include
Input: applespi - replace zero-length array with DECLARE_FLEX_ARRAY() helper
...
Tag (immutable branch) for:
v6.0-rc1 + "[PATCH v6 0/7] add support for another simatic board" series
for merging into the gpio, leds and pdx86 subsystems.
Add GPIO support for Nuvoton NCT6116 chip. Nuvoton SuperIO chips are
very similar to the ones from Fintek. In other subsystems they also
share drivers and are called a family of drivers.
For the GPIO subsystem the only difference is that the direction bit is
reversed and that there is only one data bit per pin. On the SuperIO
level the logical device is another one.
On a chip level we do not have a manufacturer ID to check and also no
revision.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Simon Guinot <simon.guinot@sequanux.org>
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Acked-by: Bartosz Golaszewski <brgl@bgdev.pl>
Link: https://lore.kernel.org/r/20220825104422.14156-4-henning.schild@siemens.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The SCU firmware on i.MX8 platforms provides a set of APIs to
control the GPIO PINs on the SCU domain. This patch implements the
standard GPIO driver interface to access those PINs on the
SCU domain over the SCU APIs.
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Reduce magic numbers and improve code readability by implementing and
utilizing named register data structures. The GPIO-MM device features an
Intel 8255 compatible GPIO interface, so the i8255 GPIO module is
selected and utilized as well.
Tested-by: Fred Eckert <Frede@cmslaser.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Reduce magic numbers and improve code readability by implementing and
utilizing named register data structures. The 104-IDI-48 device features
an Intel 8255 compatible GPIO interface, so the i8255 GPIO module is
selected and utilized as well.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: John Hentges <jhentges@accesio.com>
Cc: Jay Dolan <jay.dolan@accesio.com>
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Reduce magic numbers and improve code readability by implementing and
utilizing named register data structures. The 104-DIO-48E device
features an Intel 8255 compatible GPIO interface, so the i8255 GPIO
module is selected and utilized as well.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: John Hentges <jhentges@accesio.com>
Cc: Jay Dolan <jay.dolan@accesio.com>
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Exposes consumer library functions providing support for interfaces
compatible with the venerable Intel 8255 Programmable Peripheral
Interface (PPI).
The Intel 8255 PPI first appeared in the early 1970s, initially for the
Intel 8080 and later appearing in the original IBM-PC. The popularity of
the original Intel 8255 chip led to many subsequent variants and clones
of the interface in various chips and integrated circuits. Although
still popular, interfaces compatible with the Intel 8255 PPI are
nowdays typically found embedded in larger VLSI processing chips and
FPGA components rather than as discrete ICs.
A CONFIG_GPIO_I8255 Kconfig option is introduced by this patch. Modules
wanting access to these i8255 library functions should select this
Kconfig option, and import the I8255 symbol namespace.
Tested-by: Fred Eckert <Frede@cmslaser.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: John Hentges <jhentges@accesio.com>
Cc: Jay Dolan <jay.dolan@accesio.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Commit d3164e2f3b ("MIPS: Remove VR41xx support") removed support
for MIPS VR41xx platform, so remove exclusive drivers for this
platform, too.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
The SAMA5D2 PIOBU is only present on some AT91/Microchip SoCs. Hence
add a dependency on ARCH_AT91, to prevent asking the user about this
driver when configuring a kernel without AT91/Microchip SoC support.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
i.MX7ULP, i.MX8 and i.MX9 use this driver, so drop
the SOC_VF610 dependcy to make the driver could be built
for i.MX platform.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
The boardfiles for IXP4xx have been deleted. Delete all the
quirks and code dealing with that boot path and rely solely on
device tree boot.
Fix some missing static keywords that the kernel test robot
was complaining about while we're at it.
Cc: Bartosz Golaszewski <brgl@bgdev.pl>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
There are some special clock amendments for two machines
formerly detected by their machine_is() boardfile macro.
They are now migrated to device tree so use
of_machine_is_compatible() instead.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Pull char/misc and other driver updates from Greg KH:
"Here is the big set of char/misc and other small driver subsystem
updates for 5.18-rc1.
Included in here are merges from driver subsystems which contain:
- iio driver updates and new drivers
- fsi driver updates
- fpga driver updates
- habanalabs driver updates and support for new hardware
- soundwire driver updates and new drivers
- phy driver updates and new drivers
- coresight driver updates
- icc driver updates
Individual changes include:
- mei driver updates
- interconnect driver updates
- new PECI driver subsystem added
- vmci driver updates
- lots of tiny misc/char driver updates
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (556 commits)
firmware: google: Properly state IOMEM dependency
kgdbts: fix return value of __setup handler
firmware: sysfb: fix platform-device leak in error path
firmware: stratix10-svc: add missing callback parameter on RSU
arm64: dts: qcom: add non-secure domain property to fastrpc nodes
misc: fastrpc: Add dma handle implementation
misc: fastrpc: Add fdlist implementation
misc: fastrpc: Add helper function to get list and page
misc: fastrpc: Add support to secure memory map
dt-bindings: misc: add fastrpc domain vmid property
misc: fastrpc: check before loading process to the DSP
misc: fastrpc: add secure domain support
dt-bindings: misc: add property to support non-secure DSP
misc: fastrpc: Add support to get DSP capabilities
misc: fastrpc: add support for FASTRPC_IOCTL_MEM_MAP/UNMAP
misc: fastrpc: separate fastrpc device from channel context
dt-bindings: nvmem: brcm,nvram: add basic NVMEM cells
dt-bindings: nvmem: make "reg" property optional
nvmem: brcm_nvram: parse NVRAM content into NVMEM cells
nvmem: dt-bindings: Fix the error of dt-bindings check
...
intel-gpio for v5.18-1
* Set IRQ bus token in gpio-crystalcove to avoid debugfs error
* Check return value of kstrdup() in gpio-merrifield to error out earlier
* Clean up couple of drivers from unneeded of_node usage
* Allow gpio-tps68470 to be built as module to reduce memory foot print
