Pull SoC devicetree updates from Arnd Bergmann:
"There are a handful of new SoCs this time, all of these are more or
less related to chips in a wider family:
- SpacemiT Key Stone K3 is an 8-core risc-v chip, and the first
widely available RVA23 implementation. Note that this is entirely
unrelated with the similarly named Texas Instruments K3 chip family
that follwed the TI Keystone2 SoC.
- The Realtek Kent family of SoCs contains three chip models
rtd1501s, rtd1861b and rtd1920s, and is related to their earlier
Set-top-box and NAS products such as rtd1619, but is built on newer
Arm Cortex-A78 cores.
- The Qualcomm Milos family includes the Snapdragon 7s Gen 3 (SM7635)
mobile phone SoC built around Armv9 Kryo cores of the Arm
Cortex-A720 generation. This one is used in the Fairphone Gen 6
- Qualcomm Kaanapali is a new SoC based around eight high performance
Oryon CPU cores
- NXP i.MX8QP and i.MX952 are both feature reduced versions of chips
we already support, i.e. the i.MX8QM and i.MX952, with fewer CPU
cores and I/O interfaces.
As part of a cleanup, a number of SoC specific devicetree files got
removed because they did not have a single board using the .dtsi files
and they were never compile tested as a result: Samsung s3c6400, ST
spear320s, ST stm32mp21xc/stm32mp23xc/stm32mp25xc, Renesas
r8a779m0/r8a779m2/r8a779m4/r8a779m6/r8a779m7/r8a779m8/r8a779mb/
r9a07g044c1/r9a07g044l1/r9a07g054l1/r9a09g047e37, and TI
am3703/am3715. All of these could be restored easily if a new board
gets merged.
Broadcom/Cavium/Marvell ThunderX2 gets removed along with its only
machine, as all remaining users are assumed to be using ACPI based
firmware.
A relatively small number of 43 boards get added this time, and almost
all of them for arm64. Aside from the reference boards for the newly
added SoCs, this includes:
- Three server boards use 32-bit ASpeed BMCs
- One more reference board for 32-bit Microchip LAN9668
- 64-bit Arm single-board computers based on Amlogic s905y4, CIX
sky1, NXP ls1028a/imx8mn/imx8mp/imx91/imx93/imx95, Qualcomm
qcs6490/qrb2210 and Rockchip rk3568/rk3588s
- Carrier board for SOMs using Intel agilex5, Marvell Armada 7020,
NXP iMX8QP, Mediatek mt8370/mt8390 and rockchip rk3588
- Two mobile phones using Snapdragon 845
- A gaming device and a NAS box, both based on Rockchips rk356x
On top of the newly added boards and SoCs, there is a lot of
background activity going into cleanups, in particular towards getting
a warning-free dtc build, and the usual work on adding support for
more hardware on the previously added machines"
* tag 'soc-dt-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (757 commits)
dt-bindings: intel: Add Agilex eMMC support
arm64: dts: socfpga: agilex: add emmc support
arm64: dts: intel: agilex5: Add simple-bus node on top of dma controller node
ARM: dts: socfpga: fix dtbs_check warning for fpga-region
ARM: dts: socfpga: add #address-cells and #size-cells for sram node
dt-bindings: altera: document syscon as fallback for sys-mgr
arm64: dts: altera: Use lowercase hex
dt-bindings: arm: altera: combine Intel's SoCFPGA into altera.yaml
arm64: dts: socfpga: agilex5: Add IOMMUS property for ethernet nodes
arm64: dts: socfpga: agilex5: add support for modular board
dt-bindings: intel: Add Agilex5 SoCFPGA modular board
arm64: dts: socfpga: agilex5: Add dma-coherent property
arm64: dts: realtek: Add Kent SoC and EVB device trees
dt-bindings: arm: realtek: Add Kent Soc family compatibles
ARM: dts: samsung: Drop s3c6400.dtsi
ARM: dts: nuvoton: Minor whitespace cleanup
MAINTAINERS: Add Falcon DB
arm64: dts: a7k: add COM Express boards
ARM: dts: microchip: Drop usb_a9g20-dab-mmx.dtsi
arm64: dts: rockchip: Fix rk3588 PCIe range mappings
...
Pull SoC driver updates from Arnd Bergmann:
"There are are a number of to firmware drivers, in particular the TEE
subsystem:
- a bus callback for TEE firmware that device drivers can register to
- sysfs support for tee firmware information
- minor updates to platform specific TEE drivers for AMD, NXP,
Qualcomm and the generic optee driver
- ARM SCMI firmware refactoring to improve the protocol discover
among other fixes and cleanups
- ARM FF-A firmware interoperability improvements
The reset controller and memory controller subsystems gain support for
additional hardware platforms from Mediatek, Renesas, NXP, Canaan and
SpacemiT.
Most of the other changes are for random drivers/soc code. Among a
number of cleanups and newly added hardware support, including:
- Mediatek MT8196 DVFS power management and mailbox support
- Qualcomm SCM firmware and MDT loader refactoring, as part of the
new Glymur platform support.
- NXP i.MX9 System Manager firmware support for accessing the syslog
- Minor updates for TI, Renesas, Samsung, Apple, Marvell and AMD
SoCs"
* tag 'soc-drivers-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (171 commits)
bus: fsl-mc: fix an error handling in fsl_mc_device_add()
reset: spacemit: Add SpacemiT K3 reset driver
reset: spacemit: Extract common K1 reset code
reset: Create subdirectory for SpacemiT drivers
dt-bindings: soc: spacemit: Add K3 reset support and IDs
reset: canaan: k230: drop OF dependency and enable by default
reset: rzg2l-usbphy-ctrl: Add suspend/resume support
reset: rzg2l-usbphy-ctrl: Propagate the return value of regmap_field_update_bits()
reset: gpio: check the return value of gpiod_set_value_cansleep()
reset: imx8mp-audiomix: Support i.MX8ULP SIM LPAV
reset: imx8mp-audiomix: Extend the driver usage
reset: imx8mp-audiomix: Switch to using regmap API
reset: imx8mp-audiomix: Drop unneeded macros
soc: fsl: qe: qe_ports_ic: Consolidate chained IRQ handler install/remove
soc: mediatek: mtk-cmdq: Add mminfra_offset adjustment for DRAM addresses
soc: mediatek: mtk-cmdq: Extend cmdq_pkt_write API for SoCs without subsys ID
soc: mediatek: mtk-cmdq: Add pa_base parsing for hardware without subsys ID support
soc: mediatek: mtk-cmdq: Add cmdq_get_mbox_priv() in cmdq_pkt_create()
mailbox: mtk-cmdq: Add driver data to support for MT8196
mailbox: mtk-cmdq: Add mminfra_offset configuration for DRAM transaction
...
Pull irq chip driver updates from Thomas Gleixner:
- Add support for the Renesas RZ/V2N SoC
- Add a new driver for the Renesas RZ/[TN]2H SoCs
- Preserve the register state of the RISCV APLIC interrupt controller
accross suspend/resume
- Reinitialize the RISCV IMSIC registers after suspend/resume
- Make the various Loongson interrupt chip drivers 32/64-bit aware
- Handle the number of hardware interrupts in the SIFIVE PLIC driver
correctly
The hardware interrupt 0 is reserved which resulted in inconsistent
accounting. That went unnoticed as the off by one is only noticable
when the number of device interrupts is a multiple of 32
- The usual device tree updates, cleanups and improvements all over the
place
* tag 'irq-drivers-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
irqchip/gic-v5: Fix spelling mistake "ouside" -> "outside"
dt-bindings: interrupt-controller: sifive,plic: Clarify the riscv,ndev meaning in PLIC
irqchip/sifive-plic: Handle number of hardware interrupts correctly
irqchip/aspeed-scu-ic: Remove unused variable mask
irqchip/ti-sci-intr: Allow parsing interrupt-types per-line
dt-bindings: interrupt-controller: ti,sci-intr: Per-line interrupt-types
irqchip/renesas-rzv2h: Add suspend/resume support
irqchip/aslint-sswi: Fix error check of of_io_request_and_map() result
irqchip: Allow LoongArch irqchip drivers on both 32BIT/64BIT
irqchip/loongson-pch-pic: Adjust irqchip driver for 32BIT/64BIT
irqchip/loongson-pch-msi: Adjust irqchip driver for 32BIT/64BIT
irqchip/loongson-htvec: Adjust irqchip driver for 32BIT/64BIT
irqchip/loongson-eiointc: Adjust irqchip driver for 32BIT/64BIT
irqchip/loongson-liointc: Adjust irqchip driver for 32BIT/64BIT
irqchip/loongarch-avec: Adjust irqchip driver for 32BIT/64BIT
irqchip/riscv-aplic: Preserve APLIC states across suspend/resume
irqchip/riscv-imsic: Add a CPU pm notifier to restore the IMSIC on exit
arm64: dts: renesas: r9a09g087: Add ICU support
arm64: dts: renesas: r9a09g077: Add ICU support
irqchip: Add RZ/{T2H,N2H} Interrupt Controller (ICU) driver
...
Pull crypto update from Herbert Xu:
"API:
- Fix race condition in hwrng core by using RCU
Algorithms:
- Allow authenc(sha224,rfc3686) in fips mode
- Add test vectors for authenc(hmac(sha384),cbc(aes))
- Add test vectors for authenc(hmac(sha224),cbc(aes))
- Add test vectors for authenc(hmac(md5),cbc(des3_ede))
- Add lz4 support in hisi_zip
- Only allow clear key use during self-test in s390/{phmac,paes}
Drivers:
- Set rng quality to 900 in airoha
- Add gcm(aes) support for AMD/Xilinx Versal device
- Allow tfms to share device in hisilicon/trng"
* tag 'v7.0-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (100 commits)
crypto: img-hash - Use unregister_ahashes in img_{un}register_algs
crypto: testmgr - Add test vectors for authenc(hmac(md5),cbc(des3_ede))
crypto: cesa - Simplify return statement in mv_cesa_dequeue_req_locked
crypto: testmgr - Add test vectors for authenc(hmac(sha224),cbc(aes))
crypto: testmgr - Add test vectors for authenc(hmac(sha384),cbc(aes))
hwrng: core - use RCU and work_struct to fix race condition
crypto: starfive - Fix memory leak in starfive_aes_aead_do_one_req()
crypto: xilinx - Fix inconsistant indentation
crypto: rng - Use unregister_rngs in register_rngs
crypto: atmel - Use unregister_{aeads,ahashes,skciphers}
hwrng: optee - simplify OP-TEE context match
crypto: ccp - Add sysfs attribute for boot integrity
dt-bindings: crypto: atmel,at91sam9g46-sha: add microchip,lan9691-sha
dt-bindings: crypto: atmel,at91sam9g46-aes: add microchip,lan9691-aes
dt-bindings: crypto: qcom,inline-crypto-engine: document the Milos ICE
crypto: caam - fix netdev memory leak in dpaa2_caam_probe
crypto: hisilicon/qm - increase wait time for mailbox
crypto: hisilicon/qm - obtain the mailbox configuration at one time
crypto: hisilicon/qm - remove unnecessary code in qm_mb_write()
crypto: hisilicon/qm - move the barrier before writing to the mailbox register
...
Pull thermal control updates from Rafael Wysocki:
"These add support for "slow" (long-term trend) workload type hints to
the Intel int340x thermal driver and selftests (and enable it for
Panther Lake), add support for MT8196 along with DT bindings and for
MT7987 to the Mediatek LVTS thermal driver, add support for RZ/T2H and
RZ/N2H along with DT bindings to the Renesas rzg3e thermal driver, add
support for the Panther Lake, Wildcat Lake and Nova Lake processors to
the intel_tcc_cooling driver, fix bugs, make some cosmetic changes
including code cleanups and library function substitutions, and update
documentation.
Specifics:
- Add Panther Lake, Wildcat Lake and Nova Lake processor IDs to the
list of supported processors in the intel_tcc_cooling thermal
driver (Srinivas Pandruvada)
- Drop unnecessary explicit driver data clearing on removal from the
intel_pch_thermal driver (Kaushlendra Kumar)
- Add support for "slow" workload type hints to the int340x
processor_thermal driver and enable it on the Panther Lake platform
(Srinivas Pandruvada)
- Use sysfs_emit{_at}() in sysfs show functions in Intel thermal
drivers (Thorsten Blum)
- Update the x86_pkg_temp_thermal driver to handle
THERMAL_TEMP_INVALID that can be passed to it via sysfs as expected
(Rafael Wysocki)
- Drop a redundant local variable from the intel_tcc_cooling thermal
driver and fix a kerneldoc comment typo in the TCC library (Sumeet
Pawnikar)
- Fix CFLAGS and LDFLAGS in the pkg-config libthermal template
(Romain Gantois)
- Support multiple temp to raw conversion functions in the Mediatek
LVTS thermal driver and add MT8196 and MT6991 support to it (Laura
Nao)
- Add Mediatek LVTS driver support for MT7987 (Frank Wunderlich)
- Use the existing HZ_PER_MHZ macro on STM32 (Andy Shevchenko)
- Use the existing clamp() macro on BCM2835 (Thorsten Blum)
- Make the reset line optional in order to support new Renesas SoCs
where it is not available and add support for RZ/T2H and RZ/N2H to
the rzg3e thermal driver (Cosmin Tanislav)
- Document RZ/V2N TSU in the r9a09g047-tsu DT bindings (Ovidiu
Panait)
- Fix all kernel-doc warnings in the internal thermal core header
file (Randy Dunlap)
- Fix a device node reference leak in thermal_of_cm_lookup() (Felix
Gu)
- Replace some old-style library function calls with ones that are
currently recommended in several places in the thermal core and
debugfs code (Sumeet Pawnikar, Thorsten Blum)
* tag 'thermal-6.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (34 commits)
drivers: thermal: intel: tcc_cooling: Drop redundant local variable
thermal/of: Fix reference leak in thermal_of_cm_lookup()
thermal: core: thermal_core.h: fix all kernel-doc warnings
thermal: intel: x86_pkg_temp_thermal: Handle invalid temperature
thermal: renesas: rzg3e: add support for RZ/T2H and RZ/N2H
dt-bindings: thermal: r9a09g047-tsu: document RZ/T2H and RZ/N2H
thermal: renesas: rzg3e: make calibration value retrieval per-chip
thermal: renesas: rzg3e: make min and max temperature per-chip
thermal: renesas: rzg3e: make reset optional
dt-bindings: thermal: r9a09g047-tsu: Document RZ/V2N TSU
thermal/drivers/broadcom: Use clamp to simplify bcm2835_thermal_temp2adc
thermal/drivers/stm32: Use predefined HZ_PER_MHZ instead of a custom one
thermal/drivers/mediatek/lvts_thermal: Add mt7987 support
dt-bindings: thermal: mediatek: Add LVTS thermal controller definition for MT7987
dt-bindings: nvmem: mediatek: efuse: Add support for MT8196
thermal/drivers/mediatek/lvts_thermal: Add MT8196 support
thermal/drivers/mediatek/lvts: Support MSR offset for 16-bit calibration data
thermal/drivers/mediatek/lvts: Add support for ATP mode
thermal/drivers/mediatek/lvts: Add lvts_temp_to_raw variant
thermal/drivers/mediatek/lvts: Add platform ops to support alternative conversion logic
...
Pull power management updates from Rafael Wysocki:
"By the number of commits, cpufreq is the leading party (again) and the
most visible change there is the removal of the omap-cpufreq driver
that has not been used for a long time (good riddance). There are also
quite a few changes in the cppc_cpufreq driver, mostly related to
fixing its frequency invariance engine in the case when the CPPC
registers used by it are not in PCC. In addition to that, support for
AM62L3 is added to the ti-cpufreq driver and the cpufreq-dt-platdev
list is updated for some platforms. The remaining cpufreq changes are
assorted fixes and cleanups.
Next up is cpuidle and the changes there are dominated by intel_idle
driver updates, mostly related to the new command line facility
allowing users to adjust the list of C-states used by the driver.
There are also a few updates of cpuidle governors, including two menu
governor fixes and some refinements of the teo governor, and a
MAINTAINERS update adding Christian Loehle as a cpuidle reviewer.
[Thanks for stepping up Christian!]
The most significant update related to system suspend and hibernation
is the one to stop freezing the PM runtime workqueue during system PM
transitions which allows some deadlocks to be avoided. There is also a
fix for possible concurrent bit field updates in the core device
suspend code and a few other minor fixes.
Apart from the above, several drivers are updated to discard the
return value of pm_runtime_put() which is going to be converted to a
void function as soon as everybody stops using its return value, PL4
support for Ice Lake is added to the Intel RAPL power capping driver,
and there are assorted cleanups, documentation fixes, and some
cpupower utility improvements.
Specifics:
- Remove the unused omap-cpufreq driver (Andreas Kemnade)
- Optimize error handling code in cpufreq_boost_trigger_state() and
make cpufreq_boost_trigger_state() return -EOPNOTSUPP if no policy
supports boost (Lifeng Zheng)
- Update cpufreq-dt-platdev list for tegra, qcom, TI (Aaron Kling,
Dhruva Gole, and Konrad Dybcio)
- Minor improvements to the cpufreq and cpumask rust implementation
(Alexandre Courbot, Alice Ryhl, Tamir Duberstein, and Yilin Chen)
- Add support for AM62L3 SoC to the ti-cpufreq driver (Dhruva Gole)
- Update arch_freq_scale in the CPPC cpufreq driver's frequency
invariance engine (FIE) in scheduler ticks if the related CPPC
registers are not in PCC (Jie Zhan)
- Assorted minor cleanups and improvements in ARM cpufreq drivers
(Juan Martinez, Felix Gu, Luca Weiss, and Sergey Shtylyov)
- Add generic helpers for sysfs show/store to cppc_cpufreq (Sumit
Gupta)
- Make the scaling_setspeed cpufreq sysfs attribute return the actual
requested frequency to avoid confusion (Pengjie Zhang)
- Simplify the idle CPU time granularity test in the ondemand cpufreq
governor (Frederic Weisbecker)
- Enable asym capacity in intel_pstate only when CPU SMT is not
possible (Yaxiong Tian)
- Update the description of rate_limit_us default value in cpufreq
documentation (Yaxiong Tian)
- Add a command line option to adjust the C-states table in the
intel_idle driver, remove the 'preferred_cstates' module parameter
from it, add C-states validation to it and clean it up (Artem
Bityutskiy)
- Make the menu cpuidle governor always check the time till the
closest timer event when the scheduler tick has been stopped to
prevent it from mistakenly selecting the deepest available idle
state (Rafael Wysocki)
- Update the teo cpuidle governor to avoid making suboptimal
decisions in certain corner cases and generally improve idle state
selection accuracy (Rafael Wysocki)
- Remove an unlikely() annotation on the early-return condition in
menu_select() that leads to branch misprediction 100% of the time
on systems with only 1 idle state enabled, like ARM64 servers
(Breno Leitao)
- Add Christian Loehle to MAINTAINERS as a cpuidle reviewer
(Christian Loehle)
- Stop flagging the PM runtime workqueue as freezable to avoid system
suspend and resume deadlocks in subsystems that assume asynchronous
runtime PM to work during system-wide PM transitions (Rafael
Wysocki)
- Drop redundant NULL pointer checks before acomp_request_free() from
the hibernation code handling image saving (Rafael Wysocki)
- Update wakeup_sources_walk_start() to handle empty lists of wakeup
sources as appropriate (Samuel Wu)
- Make dev_pm_clear_wake_irq() check the power.wakeirq value under
power.lock to avoid race conditions (Gui-Dong Han)
- Avoid bit field races related to power.work_in_progress in the core
device suspend code (Xuewen Yan)
- Make several drivers discard pm_runtime_put() return value in
preparation for converting that function to a void one (Rafael
Wysocki)
- Add PL4 support for Ice Lake to the Intel RAPL power capping driver
(Daniel Tang)
- Replace sprintf() with sysfs_emit() in power capping sysfs show
functions (Sumeet Pawnikar)
- Make dev_pm_opp_get_level() return value match the documentation
after a previous update of the latter (Aleks Todorov)
- Use scoped for each OF child loop in the OPP code (Krzysztof
Kozlowski)
- Fix a bug in an example code snippet and correct typos in the
energy model management documentation (Patrick Little)
- Fix miscellaneous problems in cpupower (Kaushlendra Kumar):
* idle_monitor: Fix incorrect value logged after stop
* Fix inverted APERF capability check
* Use strcspn() to strip trailing newline
* Reset errno before strtoull()
* Show C0 in idle-info dump
- Improve cpupower installation procedure by making the systemd step
optional and allowing users to disable the installation of
systemd's unit file (João Marcos Costa)"
* tag 'pm-6.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (65 commits)
PM: sleep: core: Avoid bit field races related to work_in_progress
PM: sleep: wakeirq: harden dev_pm_clear_wake_irq() against races
cpufreq: Documentation: Update description of rate_limit_us default value
cpufreq: intel_pstate: Enable asym capacity only when CPU SMT is not possible
PM: wakeup: Handle empty list in wakeup_sources_walk_start()
PM: EM: Documentation: Fix bug in example code snippet
Documentation: Fix typos in energy model documentation
cpuidle: governors: teo: Refine intercepts-based idle state lookup
cpuidle: governors: teo: Adjust the classification of wakeup events
cpufreq: ondemand: Simplify idle cputime granularity test
cpufreq: userspace: make scaling_setspeed return the actual requested frequency
PM: hibernate: Drop NULL pointer checks before acomp_request_free()
cpufreq: CPPC: Add generic helpers for sysfs show/store
cpufreq: scmi: Fix device_node reference leak in scmi_cpu_domain_id()
cpufreq: ti-cpufreq: add support for AM62L3 SoC
cpufreq: dt-platdev: Add ti,am62l3 to blocklist
cpufreq/amd-pstate: Add comment explaining nominal_perf usage for performance policy
cpufreq: scmi: correct SCMI explanation
cpufreq: dt-platdev: Block the driver from probing on more QC platforms
rust: cpumask: rename methods of Cpumask for clarity and consistency
...
Pull sound fixes from Takashi Iwai:
"A collection of small fixes. It became a bit larger than wished, but
all of them are device-specific small fixes, and it should be still
fairly safe to take at the last minute.
Included are a few quirks and fixes for Intel, AMD, HD-audio, and
USB-audio, as well as a race fix in aloop driver and corrections of
Cirrus firmware kunit test"
* tag 'sound-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek: Enable headset mic for Acer Nitro 5
ASoC: fsl_xcvr: fix missing lock in fsl_xcvr_mode_put()
ASoC: dt-bindings: ti,tlv320aic3x: Add compatible string ti,tlv320aic23
ASoC: amd: fix memory leak in acp3x pdm dma ops
ALSA: usb-audio: fix broken logic in snd_audigy2nx_led_update()
ALSA: aloop: Fix racy access at PCM trigger
ASoC: rt1320: fix intermittent no-sound issue
ASoC: SOF: Intel: use hdev->info.link_mask directly
firmware: cs_dsp: rate-limit log messages in KUnit builds
ASoC: amd: yc: Add quirk for HP 200 G2a 16
ASoC: cs42l43: Correct handling of 3-pole jack load detection
ASoC: Intel: sof_es8336: Add DMI quirk for Huawei BOD-WXX9
ASoC: sof_sdw: Add a quirk for Lenovo laptop using sidecar amps with cs42l43
FSL SOC Changes for 6.20
Freescale Management Complex:
- Convert fsl-mc bus to bus callbacks
- Fix a use-after-free
- Drop redundant error messages
- Fix ressources release on some error path
Freescale QUICC Engine:
- Add an interrupt controller for IO Ports
- Use scoped for-each OF child loop
* tag 'soc_fsl-6.20-1' of https://git.kernel.org/pub/scm/linux/kernel/git/chleroy/linux:
bus: fsl-mc: fix an error handling in fsl_mc_device_add()
soc: fsl: qe: qe_ports_ic: Consolidate chained IRQ handler install/remove
dt-bindings: soc: fsl: qe: Add an interrupt controller for QUICC Engine Ports
soc: fsl: qe: Add an interrupt controller for QUICC Engine Ports
soc: fsl: qe: Simplify with scoped for each OF child loop
bus: fsl-mc: fix use-after-free in driver_override_show()
bus: fsl-mc: Convert to bus callbacks
bus: fsl-mc: Drop error message in probe function
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
SoCFPGA DTS updates for v6.20, version 3
- dt-bindings updates:
- Add intel,socfpga-agilex5-socdk-modular for the Agilex5 mod board
- Add intel,socfpga-agilex-emmc for the Agilex eMMC daughter board
- Move entries in intel,socfpga.yaml into altera.yaml
- Add syscon as a fallback for sys-mgr
- Add dma-cohrerent property for Agilex5 NAND and DMA
- Add support for the Agilex5 modular board
- Add IOMMUS property for ethernet nodes for Agilex5
- Use lowercase hex for dts files
- Add #address-cells and #size-cells for sram
- Fix dtbs_check warning for fpga-region
- Move dma controller node for Agilex5 under simple-bus
- Add support for the Agilex eMMC daughter board
* tag 'socfpga_dts_updates_for_v6.20_v3' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
dt-bindings: intel: Add Agilex eMMC support
arm64: dts: socfpga: agilex: add emmc support
arm64: dts: intel: agilex5: Add simple-bus node on top of dma controller node
ARM: dts: socfpga: fix dtbs_check warning for fpga-region
ARM: dts: socfpga: add #address-cells and #size-cells for sram node
dt-bindings: altera: document syscon as fallback for sys-mgr
arm64: dts: altera: Use lowercase hex
dt-bindings: arm: altera: combine Intel's SoCFPGA into altera.yaml
arm64: dts: socfpga: agilex5: Add IOMMUS property for ethernet nodes
arm64: dts: socfpga: agilex5: add support for modular board
dt-bindings: intel: Add Agilex5 SoCFPGA modular board
arm64: dts: socfpga: agilex5: Add dma-coherent property
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Agilex devkit support a separate eMMC daughter card. Document Agilex
eMMC daughter board compatible.
[dinguyen] becauce of patch 1cb8486ac5 ("dt-bindings: arm: altera: combine Intel's SoCFPGA into altera.yaml"),
I moved the change to altera.yaml file.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Ng Tze Yee <tzeyee.ng@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Pull sound fixes from Takashi Iwai:
"Just a few device-specific fixes; all small and mostly trivial, should
be pretty safe to take at the late stage"
* tag 'sound-6.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ASoC: sof_sdw: Add a quirk for Lenovo laptop using sidecar amps with cs42l43
ASoC: Intel: sof_es8336: fix headphone GPIO logic inversion
ASoC: amd: yc: Add DMI quirk for Acer TravelMate P216-41-TCO
ASoC: soc-acpi-intel-ptl-match: fix name_prefix of rt1320-2
ALSA: hda/realtek: Add quirk for Inspur S14-G1
ALSA: hda/realtek: fix right sounds and mute/micmute LEDs for HP machine
ALSA: hda/realtek: Really fix headset mic for TongFang X6AR55xU.
ALSA: hda/realtek - fixed speaker no sound
ASoC: amd: yc: Add ASUS ExpertBook PM1503CDA to quirks list
ASoC: fsl: imx-card: Do not force slot width to sample width
ASoC: dt-bindings: fsl,sai: Add support for i.MX952 platform
ASoC: cs35l45: Corrects ASP_TX5 DAPM widget channel
For 32-bit Altera SoCFPGA parts, the sys-mgr uses the syscon as a fallback.
This change addresses this warning from dtbs_check:
sysmgr@ffd08000 (altr,sys-mgr): compatible: 'oneOf' conditional failed, one
must be fixed:
['altr,sys-mgr', 'syscon'] is too long
'altr,sys-mgr-s10' was expected
'altr,sys-mgr' was expected
from schema $id: http://devicetree.org/schemas/soc/altera/altr,sys-mgr.yaml
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
For all SoCFPGA platforms, whether it has the "intel" or "altr" vendor
prefix are referring to the same business unit that is responsible for
the platform. And now that Altera has spun off to be a separate corporate
entity from Intel, it would make sense to have the device bindings
documentation in the same file.
Move the Intel AgileX board binding documentations into the same file that
contains the Altera ones.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Reset controller updates for v6.20
* Add a compatible to the reset-gpio driver, suppress the sysfs bind
attributes, and propagate GPIO API errors.
* Add support for the i.MX8ULP SIM LPAV reset controller.
* Add RZ/G3S USBPHY suspend/resume support.
* Enable reset-k230 by default on ARCH_CANAAN
* Add support for the SpacemiT K3 SoC reset controller.
* Merge the 'spacemit-clkrst-v6.20-3' tag, shared with the clk tree,
as a dependency for the SpacemiT changes.
* tag 'reset-for-v6.20' of https://git.pengutronix.de/git/pza/linux:
reset: spacemit: Add SpacemiT K3 reset driver
reset: spacemit: Extract common K1 reset code
reset: Create subdirectory for SpacemiT drivers
dt-bindings: soc: spacemit: Add K3 reset support and IDs
reset: canaan: k230: drop OF dependency and enable by default
reset: rzg2l-usbphy-ctrl: Add suspend/resume support
reset: rzg2l-usbphy-ctrl: Propagate the return value of regmap_field_update_bits()
reset: gpio: check the return value of gpiod_set_value_cansleep()
reset: imx8mp-audiomix: Support i.MX8ULP SIM LPAV
reset: imx8mp-audiomix: Extend the driver usage
reset: imx8mp-audiomix: Switch to using regmap API
reset: imx8mp-audiomix: Drop unneeded macros
reset: gpio: suppress bind attributes in sysfs
clk: spacemit: k3: extract common header
reset: spacemit: fix auxiliary device id
clk: spacemit: prepare common ccu header
reset: gpio: add the "compatible" property
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Memory controller drivers for v6.20
1. Mediatek SMI: Fix old struct device reference leaks during error
paths and device unbinding.
2. Memory Devicetree bindings: refactor existing LPDDR bindings and add
bindings for DDR4 SDRAM. These will be used for example in
stm32mp257f-ev1 DTS.
* tag 'memory-controller-drv-6.20' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
dt-bindings: memory: SDRAM channel: standardise node name
dt-bindings: memory: add DDR4 channel compatible
dt-bindings: memory: factorise LPDDR channel binding into SDRAM channel
dt-bindings: memory: introduce DDR4
dt-bindings: memory: factorise LPDDR props into SDRAM props
memory: mtk-smi: clean up device link creation
memory: mtk-smi: fix device leak on larb probe
memory: mtk-smi: fix device leaks on common probe
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
MediaTek soc driver updates
This adds:
- A socinfo entry for the MT8371 Genio 520 SoC
- Support for the Dynamic Voltage and Frequency Scaling
Resource Controller (DVFSRC) version 4, found in the
new MediaTek Kompanio Ultra (MT8196) SoC
- Initial support for the CMDQ mailbox found in the MT8196.
- A memory leak fix in the MediaTek SVS driver's debug ops.
* tag 'mtk-soc-for-v6.20' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux:
soc: mediatek: mtk-cmdq: Add mminfra_offset adjustment for DRAM addresses
soc: mediatek: mtk-cmdq: Extend cmdq_pkt_write API for SoCs without subsys ID
soc: mediatek: mtk-cmdq: Add pa_base parsing for hardware without subsys ID support
soc: mediatek: mtk-cmdq: Add cmdq_get_mbox_priv() in cmdq_pkt_create()
mailbox: mtk-cmdq: Add driver data to support for MT8196
mailbox: mtk-cmdq: Add mminfra_offset configuration for DRAM transaction
mailbox: mtk-cmdq: Add GCE hardware virtualization configuration
mailbox: mtk-cmdq: Add cmdq private data to cmdq_pkt for generating instruction
soc: mediatek: mtk-dvfsrc: Rework bandwidth calculations
soc: mediatek: mtk-dvfsrc: Get and Enable DVFSRC clock
soc: mediatek: mtk-dvfsrc: Add support for DVFSRCv4 and MT8196
soc: mediatek: mtk-dvfsrc: Write bandwidth to EMI DDR if present
soc: mediatek: mtk-dvfsrc: Add a new callback for calc_dram_bw
soc: mediatek: mtk-dvfsrc: Add and propagate DVFSRC bandwidth type
soc: mediatek: mtk-dvfsrc: Change error check for DVFSRCv4 START cmd
dt-bindings: soc: mediatek: dvfsrc: Document clock
soc: mediatek: mtk-socinfo: Add entry for MT8371AV/AZA Genio 520
soc: mediatek: svs: Fix memory leak in svs_enable_debug_write()
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
RISC-V Devicetrees for v6.20 (or v7.0)
Anlogic:
Minor change to the extension information, to add the "b" extension
that's a catch-all for 3 of the extensions already in the dts.
Starfive:
Append the jh7110 compatible to jh7110s devicetrees, as that will enable
OpenSBI etc to run without adding support for this minor variant. The
"s" device differs from the non "s" device only in
thermal limits and voltage/frequency characteristics.
Microchip:
Redo the mpfs clock setup yet again, to something approaching correct.
The original binding conjured up for the platform was wildly inaccurate,
and even with the original improvements, a bigger change to using
syscons was required to support several peripherals that also inhabit
the memory regions that the clocks lie in. The damage to the dts isn't
that bad in the end, and of course the whole thing has been done in a
backwards compatible manner, with the code changes being merged a cycle
or two ago in the kernel and like a year ago in U-Boot (the only other
user that I am aware of).
Generic:
Additions to extensions.yaml, mainly for things in the "rva23" profile
that appear for the first time on the Spacemit K3 SoC.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-dt-for-v6.20' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
riscv: dts: anlogic: dr1v90: Add "b" ISA extension
dt-bindings: riscv: extensions: Drop unnecessary select schema
dt-bindings: riscv: Add Sha and its comprised extensions
dt-bindings: riscv: Add Ssccptr, Sscounterenw, Sstvala, Sstvecd, Ssu64xl
dt-bindings: riscv: Add descriptions for Za64rs, Ziccamoa, Ziccif, and Zicclsm
dt-bindings: riscv: Add B ISA extension description
dt-bindings: riscv: update ratified version of h, svinval, svnapot, svpbmt
riscv: dts: starfive: Append JH-7110 SoC compatible to VisionFive 2 Lite eMMC board
riscv: dts: starfive: Append JH-7110 SoC compatible to VisionFive 2 Lite board
dt-bindings: riscv: starfive: Append JH-7110 SoC compatible to VisionFive 2 Lite board
riscv: dts: microchip: convert clock and reset to use syscon
riscv: dts: microchip: fix mailbox description
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
More Qualcomm Arm64 DeviceTree updates for v6.20
Enable ADSP FastRPC and add missing GPU memory regions on Agatti.
Also add the missing GPU regions on SM6115.
Describe the application subsystem watchdog on Hamoa and enable this in
the EL2 configurations.
Add the camera control interface (CCI) I2C controller on MSM8953, and
describe the camera regulators and the camera EEPROM on Fairphone FP3.
Specify clock frequency for the i2c4 bus on OnePlus 6, to silence the
warnings about missing frequency definition.
Add FastRPC and associated heap memory, as well as Coresight, on SM8750
Switch a variety of platforms to use the generic RPMPD_ constants,
instead of target-specific duplicated, to allow us to drop these from
the header files.
Drop the invalid opp-shared on the QUP OPP table for Talos.
* tag 'qcom-arm64-for-6.20-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: dts: qcom: sm6115: Add CX_MEM/DBGC GPU regions
arm64: dts: qcom: agatti: Add CX_MEM/DBGC GPU regions
arm64: dts: qcom: sm8750: add ADSP fastrpc-compute-cb nodes
arm64: dts: qcom: sm8750: add memory node for adsp fastrpc
arm64: dts: qcom: switch to RPMPD_* indices
arm64: dts: qcom: oneplus-enchilada: Specify i2c4 clock frequency
arm64: dts: qcom: sm6350: Add clocks for aggre1 & aggre2 NoC
arm64: dts: qcom: agatti: enable FastRPC on the ADSP
arm64: qcom: dts: sm8750: add coresight nodes
arm64: dts: qcom: talos: Drop opp-shared from QUP OPP table
arm64: dts: qcom: x1-el2: Enable the APSS watchdog
arm64: dts: qcom: hamoa: Add the APSS watchdog
dt-bindings: watchdog: Document X1E80100 compatible
arm64: dts: qcom: sdm632-fairphone-fp3: Enable CCI and add EEPROM
arm64: dts: qcom: sdm632-fairphone-fp3: Add camera fixed regulators
arm64: dts: qcom: msm8953: Add CCI nodes
arm64: dts: qcom: msm8953: Re-sort tlmm pinctrl states
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
New boards: Anberic RG-DS game console, Radxa CM3J module + baseboard
for the Rpi CM4 IO board, QNAP TS133 from the RK3568 NAS series.
2 display outputs for the Lion board (old RK3368), TPS65185 pmic for the
PineNote and fixes for the PCIe ranges on both RK356x and RK3588.
These came quite late, so I wanted to give them the time till 6.20-rc1
and have them migrate to stable-kernels afterwards.
The rest is small stuff on a number of boards wrt gpios and compatibles.
* tag 'v6.20-rockchip-dts64-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (25 commits)
arm64: dts: rockchip: Fix rk3588 PCIe range mappings
arm64: dts: rockchip: Fix rk356x PCIe range mappings
arm64: dts: rockchip: Add Anbernic RG-DS
dt-bindings: input: touchscreen: goodix: Add "panel" property
dt-bindings: arm: rockchip: Add Anbernic RG-DS
arm64: dts: rockchip: Explicitly request UFS reset pin on RK3576
arm64: dts: rockchip: Add TPS65185 for PineNote
arm64: dts: rockchip: Do not enable hdmi_sound node on Pinebook Pro
arm64: dts: rockchip: Fix imx258 variant on pinephone pro
arm64: dts: rockchip: Add the Video-Demo overlay for Lion Haikou
arm64: dts: rockchip: Enable pwm1 on rk3368-lion-haikou
arm64: dts: rockchip: Enable HDMI output on RK3368-Lion-Haikou
arm64: dts: rockchip: Add HDMI node to RK3368
arm64: dts: rockchip: Use phandle for i2c_lvds_blc on rk3368-lion haikou
arm64: dts: rockchip: Fix SD card support for RK3576 Nanopi R76s
arm64: dts: rockchip: Fix SD card support for RK3576 EVB1
arm64: dts: rockchip: Add Radxa CM3J on RPi CM4 IO Board
arm64: dts: rockchip: Add Radxa CM3J
dt-bindings: arm: rockchip: Add Radxa CM3J on RPi CM4 IO Board
arm64: dts: rockchip: Make eeprom read-only for Radxa ROCK 3C/5A/5C
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Microchip AT91 device tree updates for v6.20
This update includes:
- update the SAMA7D65 flexcom nodes to add the missing i2c, spi, and usart
child nodes; the flexcom child nodes were also updated with DMA
properties
- add basic support for the PCB8385 board, based on LAN966X SoC
- drop usb_a9g20-dab-mmx.dtsi as it is not used anywhere in the tree
* tag 'at91-dt-6.20' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: microchip: Drop usb_a9g20-dab-mmx.dtsi
ARM: dts: Add support for pcb8385
dt-bindings: arm: at91: add lan966 pcb8385 board
ARM: dts: microchip: sama7d65: add missing flexcom nodes
ARM: dts: microchip: sama7d65: add fifo-size to usart
ARM: dts: microchip: sama7d65: add dma properties to usart6
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
MediaTek ARM64 Device Tree updates
This adds support for new boards and variants based on different
already supported MediaTek SoCs, and improves support for current
boards.
In particular:
- New machines:
- Ezurio Tungsten 510 (MediaTek Genio 510 SoC)
- Ezurio Tungsten 700 (MediaTek Genio 700 SoC)
...improvements for already supported SoCs and machines:
- MT7981b gains support for PCI-Express, USB, Ethernet and for
the "GED" WiFi HW offload
- OpenWRT One board gains support for the same
- MT8188/8195/8390/8395 gains support for the DPI1 interface
and HDMI output from the SoC's HDMI Tx controller along with
its HDMI PHY and DDC IPs, usable on a selection of boards
that expose a HDMI connector, namely:
- All MT8390 Genio EVK based boards
- All MT8395 Genio EVK based boards
- Radxa NIO-12L (MT8395)
...and dtbs_check warning fixes for many of the MTK devicetrees,
including MT6795, MT7981, MT7986, MT7988, MT8173, MT8183, MT8186,
MT8188, MT8192, and a dts coding style fix for Airoha EN7581-EVB.
This also includes a fix for the new devicetree overlay warnings,
adding dtbs with applied overlays for all of the devices having
at least one overlay.
* tag 'mtk-dts64-for-v6.20' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux: (47 commits)
arm64: dts: mediatek: mt8192: Rename mt8192-afe-pcm to audio-controller
dt-bindings: arm: mediatek: audsys: Support mt8192-audsys variant
arm64: dts: mediatek: mt7988a: Fix PCI-Express T-PHY node address
arm64: dts: mediatek: mt8186-evb: Add vproc fixed regulator
arm64: dts: mediatek: mt7981b-openwrt-one: Add address/size cells to eth
arm64: dts: mediatek: mt8183-kukui: Clean up IT6505 regulator supply
arm64: dts: mediatek: mt7986a: Change compatible for SafeXcel crypto
arm64: dts: mediatek: mt8173-evb: Add interrupts to DA9211 regulator
arm64: dts: mediatek: mt6795-xperia-m5: Rename PMIC leds node
arm64: dts: mediatek: mt6795: Fix issues in SCPSYS node
arm64: dts: mediatek: mt6331: Fix VCAM IO regulator name
arm64: dts: mediatek: mt6795-xperia-m5: Add UHS pins for MMC1 and 2
arm64: dts: mediatek: mt8192-asurada: Remove unused clock-stretch-ns
arm64: dts: mediatek: mt8173-elm: Remove regulators from thermal node
arm64: dts: mediatek: mt8173-elm: Fix dsi0 ports warning
arm64: dts: mediatek: mt8173-elm: Fix bluetooth node name and reorder
arm64: dts: mediatek: mt8183-pumpkin: Fix pinmux node names
arm64: dts: mediatek: mt8183-jacuzzi-pico6: Fix typo in pinmux node
arm64: dts: mediatek: mt7981b-openwrt-one: Remove useless cells from flash@0
arm64: dts: mediatek: mt8183-evb: Fix dtbs_check warnings
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Amlogic ARM64 DT for v6.20:
- Cleanups:
- Use lowercase hex
- Use hyphen in node names
- move CPU OPP table and clock assignment to SoC.dtsi
- drop useless assigned-clock-parents
- MMC clock fixup across multiple families
- Add type-c controller on Radxa Zero 2 and enable NPU
- New board:
- Khadas VIM1s based on Amlogic S4
* tag 'amlogic-arm64-dt-for-v6.20' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
arm64: dts: amlogic: meson-s4-s905y4-khadas-vim1s: enable SDIO interface
arm64: dts: amlogic: add the type-c controller on Radxa Zero 2
arm64: dts: amlogic: meson-sm1-odroid: Eliminate Odroid HC4 power glitches during boot.
arm64: dts: amlogic: meson-s4-s905y4-khadas-vim1s: enable eMMC storage
arm64: dts: meson-s4-s905y4-khadas-vim1s: add initial device tree
arm64: dts: meson-s4-aq222: update compatible string with s805x2
dt-bindings: arm: amlogic: introduce specific compatibles for S4 family
arm64: dts: amlogic: Enable the npu node on Radxa Zero 2
arm64: dts: amlogic: g12: assign the MMC A signal clock
arm64: dts: amlogic: g12: assign the MMC B and C signal clocks
arm64: dts: amlogic: gx: assign the MMC signal clocks
arm64: dts: amlogic: axg: assign the MMC signal clocks
arm64: dts: amlogic: a1: align the mmc clock setup
arm64: dts: amlogic: c3: assign the MMC signal clocks
arm64: dts: amlogic: s4: fix mmc clock assignment
arm64: dts: amlogic: s4: assign mmc b clock to 24MHz
arm64: dts: amlogic: drop useless assigned-clock-parents
arm64: dts: amlogic: move CPU OPP table and clock assignment to SoC.dtsi
arm64: dts: amlogic: Use lowercase hex
arm64: dts: amlogic: Use hyphen in node names
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Samsung DTS ARM64 changes for v6.20, part two
Add DPU clock management unit nodes to Google GS101.
* tag 'samsung-dt64-6.20-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: exynos: gs101: add cmu_dpu and sysreg_dpu dt nodes
dt-bindings: clock: google,gs101-clock: Add DPU clock management unit
dt-bindings: clock: google,gs101-clock: fix alphanumeric ordering
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
STM32 DT for v6.20, round 1
Highlights:
----------
- MCU:
- Update/add Led support on ST boards.
- MPU:
- STM32MP13:
- Add boot led and red led on ST DK board.
- STMP32MP15:
- Add boot led and red led on ST DK boards.
- Add SPI1 sleep pinctrl group.
- STM32MP23:
- Add green ,orange and boot leds on ST boards.
- Add SPI, I2C, DCMIPP and CSI instances to CLUSTER_PD
power domain.
- Enable analog-filter to all I2C instances.
- STM32MP25:
- Add green ,orange and boot leds on ST boards.
- Add SPI, I2C, DCMIPP and CSI instances to CLUSTER_PD
power domain.
- Enable analog-filter to all I2C instances.
- Add LPDDR/DDR channels to ST boards.
* tag 'stm32-dt-for-v6.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (31 commits)
arm/arm64: dts: st: Drop unused .dtsi
arm64: STM32: drop an undefined Kconfig symbol
arm64: dts: st: Minor whitespace cleanup
arm64: dts: st: Use hyphen in node names
arm64: dts: st: add power-domain of dcmipp in stm32mp231.dtsi
arm64: dts: st: add power-domain of dcmipp in stm32mp251.dtsi
dt-bindings: media: st: dcmipp: add 'power-domains' property
arm64: dts: st: add power-domain of csi in stm32mp231.dtsi
arm64: dts: st: add power-domain of csi in stm32mp251.dtsi
dt-bindings: media: st: csi: add 'power-domains' property
ARM: dts: stm32: add spi1 sleep state pinctrl on stm32mp157c-ev1
arm64: dts: st: add DDR channel to stm32mp257f-ev1 board
arm64: dts: st: add LPDDR channel to stm32mp257f-dk board
arm64: dts: st: enable i2c analog-filter in stm32mp231.dtsi
arm64: dts: st: enable i2c analog-filter in stm32mp251.dtsi
arm64: dts: st: add power-domains in all i2c of stm32mp231.dtsi
arm64: dts: st: add power-domains in all i2c of stm32mp251.dtsi
dt-bindings: i2c: st,stm32-i2c: add 'power-domains' property
arm64: dts: st: add power-domains in all spi of stm32mp231.dtsi
arm64: dts: st: add power-domains in all spi of stm32mp251.dtsi
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pull pin control fixes from Linus Walleij:
- Mark the Meson GPIO controller as sleeping to avoid a
context splat
- Fix up the I2S2 and SWR TX group settings in the
Qualcomm SM8350 LPASS pin controller, and implement the
proper .get_direction() callback
- Fix a pin typo in the TG1520 pin controller
- Fix a group name in the Marvell armada 3710 XB pin
controller that got mangled in a DT schema rewrite
* tag 'pinctrl-v6.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
dt-bindings: pinctrl: marvell,armada3710-xb-pinctrl: fix 'usb32_drvvbus0' group name
pinctrl: lpass-lpi: implement .get_direction() for the GPIO driver
pinctrl: th1520: Fix typo
pinctrl: qcom: sm8350-lpass-lpi: Merge with SC7280 to fix I2S2 and SWR TX pins
pinctrl: meson: mark the GPIO controller as sleeping
dt-bindings: Changes for v6.20-rc1
This series updates various DT bindings for Tegra architecture,
primarily focusing on schema validation fixes and new feature
documentation for Tegra234 and Tegra264 SoCs. Key changes include
converting Tegra20 NAND bindings to YAML, and updating memory, DMA, and
IOMMU definitions for Tegra264 (introducing CMDQV and DBB clock
support). Additionally, it resolves legacy warnings for Tegra30/132
display and VI interfaces.
* tag 'tegra-for-6.20-dt-bindings-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: display: tegra: document Tegra30 VI and VIP
dt-bindings: display: tegra: document Tegra132 MIPI calibration device
dt-bindings: mtd: nvidia,tegra20-nand: convert to DT schema
dt-bindings: dma: Update ADMA bindings for tegra264
dt-bindings: iommu: Add NVIDIA Tegra CMDQV support
dt-bindings: memory: tegra: Document DBB clock for Tegra264
dt-bindings: tegra: pmc: Update aotag as an optional aperture
Pull CPUFreq Arm updates for 7.0 from Viresh Kumar:
"- Update cpufreq-dt-platdev list for tegra, qcom, TI (Aaron Kling,
Dhruva Gole, and Konrad Dybcio).
- Minor improvements to the cpufreq / cpumask rust implementation
(Alexandre Courbot, Alice Ryhl, Tamir Duberstein, and Yilin Chen).
- Add support for AM62L3 SoC to ti-cpufreq driver (Dhruva Gole).
- Update FIE arch_freq_scale in ticks for non-PCC regs (Jie Zhan).
- Other minor cleanups / improvements (Felix Gu, Juan Martinez, Luca
Weiss, and Sergey Shtylyov)."
* tag 'cpufreq-arm-updates-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: scmi: Fix device_node reference leak in scmi_cpu_domain_id()
cpufreq: ti-cpufreq: add support for AM62L3 SoC
cpufreq: dt-platdev: Add ti,am62l3 to blocklist
cpufreq/amd-pstate: Add comment explaining nominal_perf usage for performance policy
cpufreq: scmi: correct SCMI explanation
cpufreq: dt-platdev: Block the driver from probing on more QC platforms
rust: cpumask: rename methods of Cpumask for clarity and consistency
cpufreq: CPPC: Update FIE arch_freq_scale in ticks for non-PCC regs
cpufreq: CPPC: Factor out cppc_fie_kworker_init()
ACPI: CPPC: Factor out and export per-cpu cppc_perf_ctrs_in_pcc_cpu()
rust: cpufreq: replace `kernel::c_str!` with C-Strings
cpufreq: Add Tegra186 and Tegra194 to cpufreq-dt-platdev blocklist
dt-bindings: cpufreq: qcom-hw: document Milos CPUFREQ Hardware
rust: cpufreq: add __rust_helper to helpers
rust: cpufreq: always inline functions using build_assert with arguments
The trailing '0' character of the 'usb32_drvvbus0' pin group got removed
during converting the bindings to DT schema.
$ git grep -n usb32_drvvbus v6.18
v6.18:Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt:106:group usb32_drvvbus0
v6.18:drivers/pinctrl/mvebu/pinctrl-armada-37xx.c:195: PIN_GRP_GPIO("usb32_drvvbus0", 0, 1, BIT(0), "drvbus"),
$ git grep -n usb32_drvvbus v6.19-rc1
v6.19-rc1:Documentation/devicetree/bindings/pinctrl/marvell,armada3710-xb-pinctrl.yaml:91: usb2_drvvbus1, usb32_drvvbus ]
v6.19-rc1:drivers/pinctrl/mvebu/pinctrl-armada-37xx.c:195: PIN_GRP_GPIO("usb32_drvvbus0", 0, 1, BIT(0), "drvbus"),
Add it back to match the group name with the one the driver expects.
Fixes: c1c9641a04 ("dt-bindings: pinctrl: Convert marvell,armada-3710-(sb|nb)-pinctrl to DT schema")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Update the bindings to allow setting per-line interrupt-types.
Some Interrupt Router instances can only work with a specific trigger
type (edge or level), while others act as simple passthroughs that
preserve the source interrupt type unchanged.
Make "ti,intr-trigger-type" property optional, with its absence
indicating that the router acts as a passthrough. When absent,
"#interrupt-cells" must be 2 to allow each interrupt source to specify
its trigger type per-line.
Signed-off-by: Aniket Limaye <a-limaye@ti.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260123-ul-driver-i2c-j722s-v4-1-b08625c487d5@ti.com
Qualcomm Arm64 DeviceTree for v6.20
Introduce the Kaanapali SoC, with the MTP and QRD devices. Introduce
support for the Milos SoC (SM7635) and initial support for the Fairphone
(Gen 6) device on this platform.
Add the QCS6490-based RubikPI3 board, the QRB2210-based Arduino UnoQ,
the X Elite-based Medion SPRCHRGD 14 S1 and Surface Pro 11 laptops, and
the SDM845-based Pixel 3 and Pixel 3 XL devices.
On the Kodiak-based (QCS6490) RB3Gen2 the TC9563 PCIe switch controller
is described.
On Lemans (SA8775P/QCS9075) the GPU and crypto blocks are added.
IO-regions and clocks are added to interconnect nodes to allow QoS
configuration. GPU, TPM and USB support are enabled on the evaluation
kit (EVK).
On Monaco (QCS8300) the two PCIe controllers, the camera subsystem,
tsens, display subsystem, crypto, CPUfreq, and coresight are added. On
the evaluation kit (EVK) the PCIe busses are enabled, together with an
AMC6821-based fan controller and the ST33 TPM chip.
On MSM8939 the camera subsystem is described. The Asus ZenFone 2
Laser/Selfie gains battery and hall sensor support.
On the Agatti-based RB1 board PM8008 is described and an overlay for the
Vision mezzanine is introduced.
On SDM630 the compute DSP remoteproc, FastRPC and related entites are
described. The LPASS LPI pinctrl node is described.
On SDM845-based OnePlus device the bootloader framebuffer and its
resources are described, to improve the transition. On the SDM845-based
devices from OnePlus, SHIFT, and Xiaomi ath10k calibration variants are
specified. The sensor remoteproc is enabled on Xiaomi Pocophone F1.
On SM7225-based Fairphone FP4 regulators for the cameras are described,
and the camera EEPROM is added.
On SM8650 the camera subsystem is described. On the QRD the Samsung
S5KJN1 camera sensor is added, and for the HDK an overlay for the "Rear
Camera Card" is added.
On SM8750 CPUfreq, SDCHCI and Iris (video encode/decode) support are
added, and missing - required - properties for the BAM DMA is added.
These are then enabled on the MTP.
On Talos (SM6150/QCS615) PMU, DisplayPort, and USB/DP combo PHY are added.
DisplayPort is enabled on the Talos Ride board.
On Hamoa (X Elite) add crypto engine, missing TCSR reference clocks, and
random number generator block. The soc bus address width is corrected to
match the hardware. On the Lenovo Thinkpad T14s HDMI and audio playback
over DisplayPort is introduced. HDMI, Iris (video encode/decode) and
PS8830 retimers are described for the ASUS Vivobook S 15. On the Hamoa
evaluation kit (EVK) PCIe busses, WiFi, backlight, TPM and RG
(red/green) LEDs are described.
Enable QSEECOM, and thereby UEFI variable access, on the Medion SPRCHRGD
14 S1 (commit should have been on drivers branch).
* tag 'qcom-arm64-for-6.20' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (155 commits)
dt-bindings: mailbox: qcom: Add IPCC support for Kaanapali and Glymur Platforms
dt-bindings: mailbox: qcom: Add CPUCP mailbox controller bindings for Kaanapali
arm64: dts: qcom: lemans: enable static TPDM
arm64: dts: qcom: kodiak: Add memory region for audiopd
arm64: dts: qcom: x1e78100-lenovo-thinkpad-t14s: add HDMI nodes
arm64: dts: qcom: x1e: bus is 40-bits (fix 64GB models)
arm64: dts: qcom: lemans; Add EL2 overlay
arm64: dts: qcom: sm8150: add uart13
arm64: dts: qcom: sdm845-db845c: specify power for WiFi CH1
arm64: dts: qcom: sdm845-db845c: drop CS from SPIO0
arm64: dts: qcom: qrb4210-rb2: Fix UART3 wakeup IRQ storm
arm64: dts: qcom: sm6125-ginkgo: Fix missing msm-id subtype
arm64: dts: qcom: qcs8300: Add GPU cooling
arm64: dts: qcom: sa8775p: Add reg and clocks for QoS configuration
arm64: dts: qcom: hamoa-iot-evk: Enable TPM (ST33) on SPI11
arm64: dts: qcom: talos: Add PMU support
arm64: dts: qcom: talos: switch to interrupt-cells 4 to add PPI partitions
arm64: dts: qcom: ipq9574: Complete USB DWC3 wrapper interrupts
arm64: dts: qcom: ipq5018: Correct USB DWC3 wrapper interrupts
arm64: dts: qcom: monaco: Add CTCU and ETR nodes
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Samsung DTS ARM64 changes for v6.20
1. ExynosAutov920:
- Add MFD clock controller node.
2. Google GS101:
- Add True Random Number Generator (TRNG) and OTP nvmem nodes.
- Correct the PMU (Power Management Unit) compatibles by dropping
fallback to syscon. The PMU on Samsung devices serves the role of
syscon, however on GS101 it cannot be used via standard Linux syscon
interface, because register accesses require custom regmap. It was
simply never correctly working with "syscon" compatible fallback.
- Add phandles to System Registers SYSREG blocks in clock controllers,
necessary for enabling automatic clock control later.
* tag 'samsung-dt64-6.20' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: exynos: gs101: add OTP node
arm64: dts: exynos: gs101: add samsung,sysreg property to CMU nodes
arm64: dts: exynosautov920: add CMU_MFD clock DT nodes
arm64: dts: exynos: gs101: remove syscon compatible from pmu node
dt-bindings: soc: samsung: exynos-pmu: remove syscon for google,gs101-pmu
arm64: dts: exynos: gs101: add TRNG node
dt-bindings: rng: add google,gs101-trng compatible
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pull char/misc/iio driver fixes from Greg KH:
"Here are some small char/misc/iio and some other minor driver
subsystem fixes for 6.19-rc7. Nothing huge here, just some fixes for
reported issues including:
- lots of little iio driver fixes
- comedi driver fixes
- mux driver fix
- w1 driver fixes
- uio driver fix
- slimbus driver fixes
- hwtracing bugfix
- other tiny bugfixes
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (36 commits)
comedi: dmm32at: serialize use of paged registers
mei: trace: treat reg parameter as string
uio: pci_sva: correct '-ENODEV' check logic
uacce: ensure safe queue release with state management
uacce: implement mremap in uacce_vm_ops to return -EPERM
uacce: fix isolate sysfs check condition
uacce: fix cdev handling in the cleanup path
slimbus: core: clean up of_slim_get_device()
slimbus: core: fix of_slim_get_device() kernel doc
slimbus: core: amend slim_get_device() kernel doc
slimbus: core: fix device reference leak on report present
slimbus: core: fix runtime PM imbalance on report present
slimbus: core: fix OF node leak on registration failure
intel_th: rename error label
intel_th: fix device leak on output open()
comedi: Fix getting range information for subdevices 16 to 255
mux: mmio: Fix IS_ERR() vs NULL check in probe()
interconnect: debugfs: initialize src_node and dst_node to empty strings
iio: dac: ad3552r-hs: fix out-of-bound write in ad3552r_hs_write_data_source
iio: accel: iis328dq: fix gain values
...
