For S3 on vangogh, PMFW needs to be notified before the
driver powers down RLC. This already happens in smu_disable_dpms()
so drop the superfluous call in amdgpu_device_suspend().
Co-developed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 960e30a61e)
This change introduces infrastructure to check whether VCN reset
is supported by the SMU firmware. Key changes include:
1. Added new functions to query VCN reset support:
- amdgpu_dpm_reset_vcn_is_supported()
- smu_reset_vcn_is_supported()
- pptable_funcs.reset_vcn_is_supported callback
2. Implemented proper locking in the DPM layer with mutex protection
3. Maintained consistency with existing SDMA reset support checks
The new capability allows callers to check for VCN reset support
before attempting the operation, preventing unnecessary attempts
on unsupported platforms.
v2: clean up debug info(Alex)
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Ruili Ji <ruiliji2@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The bad pages threshold exceed CPER should be generated once threshold
exceeded, no matter the bad_page_threshold setted or not.
Signed-off-by: Xiang Liu <xiang.liu@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add dpm interface to get gpuboard/baseboard temperature metrics
v2: Add temperature metrics support check(Lijo)
v3: Return error code in case of operation not supported(Lijo)
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support to set ISP clocks for SMU v14.0.0. ISP driver
uses amdgpu_dpm_set_soft_freq_range() API to set clocks via
SMU interface than communicating with PMFW directly.
amdgpu_dpm_set_soft_freq_range() is updated to take in any
pp_clock_type than limiting to support only PP_SCLK to allow
ISP and other driver modules to set the min/max clocks. Any
clock specific restrictions are expected to be taken care in
SOC specific SMU implementations instead of generic amdgpu_dpm
and amdgpu_smu interfaces.
Reviewed-by: Xiaojian Du <xiaojian.du@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Pratap Nirujogi <pratap.nirujogi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support to set ISP power for SMU v14.0.0. ISP driver
uses amdgpu_dpm_set_powergating_by_smu() API to
enable / disable power via SMU interface than communicating
with PMFW directly.
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Pratap Nirujogi <pratap.nirujogi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To be used for display idle optimizations when
we want to pause non-default profiles.
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In the case of CPER disabled, generating CPER will cause kernel NULL
pointer dereference without checking.
Signed-off-by: Xiang Liu <xiang.liu@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch introduces a new function to check if the SMU supports resetting the SDMA engine.
This capability check ensures that the driver does not attempt to reset the SDMA engine
on hardware that does not support it.
The following changes are included:
- New function `amdgpu_dpm_reset_sdma_is_supported` to check SDMA reset
support at the AMDGPU driver level.
- New function `smu_reset_sdma_is_supported` to check SDMA reset support
at the SMU level.
- Implementation of `smu_v13_0_6_reset_sdma_is_supported` for the specific
SMU version v13.0.6.
- Updated `smu_v13_0_6_reset_sdma` to use the new capability check before
attempting to reset the SDMA engine.
v2: change smu_reset_sdma_is_supported type to bool (Tim)
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Reviewed-by: Tim Huang <tim.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Generate CPER record when bad page threshold exceed and
commit to CPER ring.
v2: return -ENOMEM instead of false
v2: check return value of fill section function
Signed-off-by: Xiang Liu <xiang.liu@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Before forcing level, CG/PG is disabled or enabled depending on the new
level. However if the force level operation fails, CG/PG state remains
modified. Revert the state change on failure. Also, move invalid
operation checks to the beginning before any logic that could change SOC
state.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add an instance parameter to amdgpu_dpm_enable_vcn() function, and change
all calls from vcn ip functions to add instance argument. vcn generations
with only one instance (v1.0, v2.0) always use 0 as instance number. vcn
generations with multiple instances (v2.5, v3.0, v4.0, v4.0.3, v4.0.5,
v5.0.0) use the actual instance number.
v2: remove for-loop in amdgpu_dpm_enable_vcn(), and temporarily move it
to vcn ip with multiple instances, in order to keep the exact same logic
as before, until further separation in next patch.
v3: fix missing prefix
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add an instance parameter to amdgpu_dpm_set_powergating_by_smu() function,
and use the instance to call set_powergating_by_smu().
v2: remove duplicated functions.
remove for-loop in amdgpu_dpm_set_powergating_by_smu(), and temporarily
move it to amdgpu_dpm_enable_vcn(), in order to keep the exact same logic
as before, until further separation in next patch.
v3: drop SI logic in amdgpu_dpm_enable_vcn().
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add an instance parameter to set_powergating_by_smu() function, and
re-write all amd_pm functions accordingly. Then use the instance to
call smu_dpm_set_vcn_enable().
v2: remove duplicated functions.
remove for-loop in smu_dpm_set_power_gate(), and temporarily move it to
to amdgpu_dpm_set_powergating_by_smu(), in order to keep the exact same
logic as before, until further separation in next patch.
v3: add instance number in error message.
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Implement sdma soft reset by sending MSG_ResetSDMA on smu 13.0.6.
v2: Add firmware version for the reset message.
v3: Add ip version check. Print inst_mask on failure.
Signed-off-by: Jiadong Zhu <Jiadong.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
VFs do not perform HW fini/suspend in FLR, so the dpm_enabled
is incorrectly kept enabled. Add interface to disable it in
virt_pre_reset call.
v2: Made implementation generic for all asics
v3: Re-order conditionals so PP_MP1_STATE_FLR is only evaluated on VF
Signed-off-by: Victor Skvortsov <victor.skvortsov@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support to set/get information about different DPM policies. The
support is only available on SOCs which use swsmu architecture.
A DPM policy type may be defined with different levels. For example, a
policy may be defined to select Pstate preference and then later a
pstate preference may be chosen.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The smu needs to get the rlc power down message to sync the rlc state
with smu, the rlc state updating message need to be sent at while smu
begin suspend sequence , otherwise SMU will crash while RLC state is not
notified by driver, and rlc state probally changed after that
notification, so it needs to notify rlc state to smu at the end of the
suspend sequence in amdgpu_device_suspend() that can make sure the rlc
state is correctly set to SMU.
[ 101.000590] amdgpu 0000:03:00.0: amdgpu: SMU: I'm not done with your previous command: SMN_C2PMSG_66:0x0000001E SMN_C2PMSG_82:0x00000000
[ 101.000598] amdgpu 0000:03:00.0: amdgpu: Failed to disable gfxoff!
[ 110.838026] amdgpu 0000:03:00.0: amdgpu: SMU: I'm not done with your previous command: SMN_C2PMSG_66:0x0000001E SMN_C2PMSG_82:0x00000000
[ 110.838035] amdgpu 0000:03:00.0: amdgpu: Failed to disable smu features.
[ 110.838039] amdgpu 0000:03:00.0: amdgpu: Fail to disable dpm features!
[ 110.838040] [drm:amdgpu_device_ip_suspend_phase2 [amdgpu]] *ERROR* suspend of IP block <smu> failed -62
[ 110.884394] PM: suspend of devices aborted after 21213.620 msecs
[ 110.884402] PM: start suspend of devices aborted after 21213.882 msecs
[ 110.884405] PM: Some devices failed to suspend, or early wake event detected
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Prevent further dpm casting on legacy asics without od_enabled in
amdgpu_dpm_is_overdrive_supported. This can avoid UBSAN complain
in init sequence.
v2: add a macro to check legacy dpm instead of checking asic family/type
v3: refine macro name for naming consistency
Suggested-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
added a sysfs interface for thermal throttling, then userspace
can get/update thermal limit
Signed-off-by: Kun Liu <Kun.Liu2@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add debugfs interface to log GFXOFF statistics:
- Read amdgpu_gfxoff_count to get the total GFXOFF entry count at the
time of query since system power-up
- Write 1 to amdgpu_gfxoff_residency to start logging, and 0 to stop.
Read it to get average GFXOFF residency % multiplied by 100
during the last logging interval.
Both features are designed to be keep the values persistent between
suspends.
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Linux 5.18-rc5
There was a build fix for arm I wanted in drm-next, so backmerge rather then cherry-pick.
Signed-off-by: Dave Airlie <airlied@redhat.com>
The adev->pm.mutx is already held at the beginning of
amdgpu_dpm_compute_clocks/amdgpu_dpm_enable_uvd/amdgpu_dpm_enable_vce.
But on their calling path, amdgpu_display_bandwidth_update will be
called and thus its sub functions amdgpu_dpm_get_sclk/mclk. They
will then try to acquire the same adev->pm.mutex and deadlock will
occur.
By placing amdgpu_display_bandwidth_update outside of adev->pm.mutex
protection(considering logically they do not need such protection) and
restructuring the call flow accordingly, we can eliminate the deadlock
issue. This comes with no real logics change.
Fixes: 3712e7a494 ("drm/amd/pm: unified lock protections in amdgpu_dpm.c")
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reported-by: Arthur Marsh <arthur.marsh@internode.on.net>
Link: https://lore.kernel.org/all/9e689fea-6c69-f4b0-8dee-32c4cf7d8f9c@molgen.mpg.de/
BugLink: https://gitlab.freedesktop.org/drm/amd/-/issues/1957
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It must check asic whether support smu
before call smu powerplay function, otherwise
it may cause null point on no support smu asic.
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
